90 b system fan does not

System fan does not, please stop, press ENTER to continue... 90 (B)

Laptop Presario CQ57

Windows 7 Home premium, 64-bit OS.

Product number B1Q23EA #ABF, still under warranty, purchased and resident in France.

If I need to send for repair, please provide French tosend address him, thank you.

Thank you, but I do not read or speak French well. I decided to open it and look for the dust bunnies.

I found a tiny and removed dust Bunny, and the problem is now resolved. 4 months to break a fan, not impressed.

My last laptop was a rabbit from the dust of the size of a gerbil before he started to complain... I don't know what my next laptop purchase will be, and what makes it not. Thanks for the reply.

Tags: Notebooks

Similar Questions

  • Satellite P100-324 - GPU overheating due to fan does not work in the operating system

    Hello world.

    While trying to solve the problem of RAM of 4 GB ([this thread | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=28374&tstart=0]), I meet another weird thing - gpu overheating due to fan does not work in the operating system.

    Now, I restored the XP MCE using the Toshiba Recovery and I was VERY surprised to see that the problem still exists! As soon as loading the system GPU fan stops, and there is only tranquility. The application load is heavy on GPU and reaching 104 results by reducing its GPU and MEMORY clock values and NOT in the activation of the fan.

    The same thing happens in 64-bit gentoo. ACPI can be turned on or off, it is not serious, the GPU fan always dies as soon as the system load. In non-OS environments (bios, program of recovery, etc.) the fan works fine, GPU cooling from time to time.

    This problem occurs in versions of BIOS: 2.40, 4.00, 4.20.

    Any help would be greatly appreciated, since this laptop is my main working tool and I can't let go 14 days (service).

    I saw in your other thread that you have updated the BIOS and you have installed several different OS.

    Fact is that the BIOS v 4.2 package contains BIOS 32-bit and 64-bit OS.
    Your laptop has been preloaded with Win XP MCE 32 bit. Please use the 32-bit BIOS if the original XP MCE running on the laptop.

    Best regards

  • My HP laptop cooling fan does not work.

    Okay, so. I have a HP Pavilion 1145sg g6. It worked fine all morning, and then I put sleep temporarily (about ten to twenty minutes). When I went to turn it on, the screen was black and he said something along the lines of

    "the system has detected that a cooling fan does not work correctly. Suite operation is not recommended at this time... may result in unpredictable behavior that may result closed random, loss of data or damage the system as possible. »

    Then after a few seconds it stops completely. There is an option to continue with the summary of the system and I clicked once on it, but she didn't go through completely for allowing me to use my laptop properly (I arrived at my wallpaper and it stopped).

    This has never happened before, and I never had any problem with my laptop, like this before. I have had him since last August, and it worked pretty well through until today. Of course, the system sometimes, accused but nothing serious, for the most part just aggravating.

    How can I fix?

    Someone said here that they stung the fan with a hairpin and it started working. I took a toothpick and switched my laptop and tried to move the fan and the fan started WALLA on! I noticed that a lot of dust in there and that's probably the culprit first event hough I keep this laptop clean every day, this darn dust is sneaky and small. If you use a toothpick, make sure not to break anything especially the toothpick. last thing you want to do is cause more harm. Now that I think I don't remember when the last fan worked and if it wasn't for the message that popped up today I would not of the same notice I wasn't to hear the fan because last week I said "wow is not the substance of this portable super hot feeling", but I just thought that my fiance was simply playing games on the computer for too long and that's why he was hot. He never closes the computer off smh. in any case, I'm very happy I read this post of a person using the PIN to hair. That's what forums are all about. Help each other. I hope it works for you. Be gentle, try pushing the way fan propellers in clockwise. Use a flashlight to see if dust or anything like that is by the way to allow the fan to run its on.  I blew in the vents, but it did have almost all of the dust of the road.  All of these messages, it seems this is a common problem. Good luck

  • Satellite P105 - GPU overheating as fan does not work

    I brought a Satellite P105 - S9337 laptop computer around a year ago and it's been great, but I had a problem that began a few months ago. The GPU fan does not run under windows or any OS. It works correctly in the BIOS, but when I hit the operating system, it will stop. This is obviously the cause for overhead.

    -J' tried different drivers of Toshiba and other sources. Currently using 7.15.11.5666 which was the last version of Toshiba.
    -Tried all BIOS and running 4.40.
    -Cleaned it if sure there is no dust blocking the fan wheel.
    -I even sent to Toshiba for repair 4 times and it comes back with the same question.

    It's as if the fan control is equal to change the operating system when it reaches him like bios and basic OS (dos, the flash media bootable back past) works very well. It runs when she is hot and stops when it is ok.

    At the moment that I leat overheating for a while then he seems to remember he's a fan after 30 minutes or more and comes into play. It works on OS at full speed, until my laptop loses power or I unplug battery, that I did today to increase the RAM.

    There must be some drivers or BIOS out there that allows the BIOS to manage the fan or it just as it manages itself is so it doesn't overhead. I'm not pleading can someone help me with what it's getting very boring. e-mail is [[email protected]] If you want to contact me, because I'm out of ideas.

    If I can't get this resolved I'm thinking of dismantling and wiring of the fan on but would prefer to avoid that for now.

    My laptop (P100-481) was overheating too since I have updated BIOS 4.20 and above all. The latest version of the BIOS with work-fan control was 4.00.

    There are two ways to set the fan control:

    1 go to BIOS 4.00. You'll get stuttering in games because the initialization of GPU in the form of Versions all 3.30 to 4.00 are buggy.

    2. you can try this way: [http://www.laptopvideo2go.com/forum/index.php?s=679696d192a1f43137253716ebd799b8&showt = 19190 CIPO & view = findpost & p = 79039]

    It's not easy install a double Windows, but it worked for me.

    There is a bug in the BIOS 4.20 4.30 and 4.40 and a lot of people have trouble with the GPU fan. So hopefully Toshiba find time to fix it in the near future.

  • Satellite Pro 6100: error message - cooling fan does not work

    Hello
    I have a SP6100 and it keeps giving me an error message about the cooling fan does not. Then he tells me to stop immediately and runs very slowly. The fan come on, but after three or four short bursts it stops and the message appears.
    Is it a mechanical problem with the fan? I took out the radiator and the fan, and it was clean and not sticky.
    What is a system problem? The BIOS has recently been updated.
    Should I just invest in a new cooling unit and if so where would I get one?
    Any help would be greatly appreciated!
    Thank you.

    Hello

    I recommend to contact the ASP (certified partner) because it can test your device and can do a diagnostic test.
    You can be sure that the laptop will be repaired correctly 100%.

  • A60 Pro satellite fan does not

    Hi all

    I have a problem with my sons laptop. Intermittently, the fan does not start and after a while, the computer overheats and stops.

    The problem is not the fan itself, it runs for a few seconds when always first turned, but then sometimes does not start again.

    When this happens, the only way I can get the fan works again is to remove the battery (with no power applied area) and leave the laptop for a little while, then re - turn on the power (battery or sector, it's okay)

    Only, I arrived at this "difficulty" by accident after many hours of troubleshooting, upgrade the BIOS, cd restore and apply all other updates from the support site (which did nothing).
    When 'fixed' portable tracks without penalty - until the next time, he decides to "free" itself!
    The closest I can find as to the cause of this is that it seems to happen when the battery has been recently fully charged (i.e. charged during the night), but it is by no means certain that the fault will be re appear.

    As part of my diagnostic tests, I installed a utility material, which shows that, in default conditions, the CPU temperature is always reported as 18 centigrade monitoring. It never varies.
    When you are working correctly (the fan) the CPU temperature is shown as variant.

    My best guess is that is some sort of glitch in the system management bus and eliminating completely any kind of power it resets somehow.

    If anyone has any suggestions on how (if?) I can cure this permanently, I would be very grateful.

    Have scoured the forums for references, I've not found anything about this problem.

    Thank you
    Steve

    Hello

    I agree with you when you say that it is a very special problem. Because of this, I really put t think you will be able to find a quick fix to this problem. Fan behavior is really strange, but watch the CPU temperature is also unrealistic and it is about 60 C and cannot be 18 C as shown.

    The fact is that fan activity depends on the temperature of the system and sensors to measure the temperature. Here, we can speculate on all, but believe me, the device must be checked properly. I'm 100% sure it's hardware related issue and installation or recovery will probably not solve the problem.

    As you can see preinstalled monitor tool completely unrealistic show its temperature and it has something completely mixed up.

    I recommend you contact the partner of service allowed in your country and let check the device and the motherboard. They have designed special tools and I don't know that they can give you an exact explanation what the problem is.

  • My HP Pavilion g6 fan does not work.

    I bought a HP Pavilion g6 2230tx a few months back and its cooling fan has stopped working.
    It was working fine, but the problem started when I played Euro Truck Simulator 2 full settings. The cooling fan has been throwing a large amount of heat and the fan was moving quickly, but I continued to play. Later that day, when I turned on my laptop, it showed an error which was: "the system has detected that a cooling fan does not work correctly and continued operation can cause damage.
    Fan system (90 b)'.
    Then I turns off after 15 seconds.
    My laptop is under warranty until 2016-06-16 [YYYY-MM-DD] and the Security category is "guarantee of the factory." {Deleted personal information} & product number is C9L64PA #ACJ. Now my question is that how much HP will take to repair or replace my laptop fan. Will it be free? ;-)
    And I live in India.
    Thanks in advance
    Aniket Chauhan

    Dear Hüffer
    I tried what you say except clean it with compressed air and a paperclip. I'm going to send my laptop for repair and now I hope they'll work again.
    Concerning
    Aniket Chauhan

  • E540: Fan does not stop

    Hello Board and support team!

    The fan in my e540 does not stop once it began to turn. It is completely independent of the system temperature. Even if the room temperature and the cpu is less than 40 * C the fan will not stop.

    The fan does not always turn, however. If I wake up the system from sleep mode or turn it on, the fan does not turn and will not start spinning until a certain threshold temperature is reached. This part of the fan control works correctly.

    Interesting procedure: I work until the heating system and the fan starts. I waint until the system is cooled below 40 * C (checked with software speccy, the flow of air leaving the laptop is cold). The fan is still running at this stage and will turn probably forever. I suspend the laptop (no full stop not required). I immediatally 'wake up' the laptop (temperature of the system has not changed, no time to cool). The fan is off again and will not start turning until the temperature threshold is reached.

    What can I do to fix this? I don't always want to suspend my laptop to turn off the fan. She has to stop on its own.


  • "cooling fan does not work correctly.

    Product name: HP Pavilion dv6 Notebook PC

    Product number: LZ801PA #ACJ

    Operating system: Windows 7 64-bit

    Erroe message:

    "The system has detected a cooling fan does not work correctly. . Continued operation is not recommended and can result in unpredictable behavior that may cause stop randomly, loss of data or damage the system as possible. The system will stop in 15 seconds. To prevent stop and continue the operation please press enter now. »

    OK, now, I cleaned compressed air fan can now issue is completely resolved and my laptop is like as it should. I ask to do something else?
    I mean I don't want my internal parts of the laptop to be defective.

    http://compareindia.in.com/specification/laptops/HP-Pavilion-dv66115tx-lz801pa/238232

    Try a hard reset as follows:

    (1) remove the battery and unplug the DC power adapter.
    (2) press and hold the power button for more than 15 seconds.
    (3) plug the DC power adapter (leave the battery for now)
    4) press the power button

    Please post here your positives or negatives in your thread.

    Best regards
    ERICO

  • Pavilion g7-1368dx "cooling fan does not work correctly.

    Greetings. I have a HP Pavilion g7-1368dx laptop with Windows 7 I bought in June 2012, is no longer under warranty.

    A few weeks ago he had a thermal cut-out once during use. After cooling, the laptop works very well for a few uses, but then it has started giving the boot warning message, "the system has detected that a cooling fan is not working properly," with an additional indication of the damage if the computer is used in this State.

    I ordered a new fan and succeeded him, and I cleaned the fan grille in the process (although it wasn't very dirty), but I still get the same fan error message. I went to the HP website and saw the suggestion to do a "hard reset", so I did it, but the problem persists.

    I saw another suggestion to try a BIOS update, but I thought that would not be desirable because the fan does not work. Suggest you go through with the attempt to update the BIOS anyway?

    Is there something else I can try before ordering a new card system?

    Thanks for your help.

    Dear customer,

    Welcome to the Support Forum HP and we are happy to help you

    Looks like you are having difficulties with regard to your laptop cooling fan
    We will surely help you with this

    According to the message that you have posted, I suspect that it is purely a matter of material where in your message 'System Fan(90B) - the system has detected that a cooling fan does not work properly' get. It is a mechanical failure and fan cooling of your laptop and must be replaced before the laptop starts with an overheating problem.

    Causes/reasons for this problem:

    1. sometimes, it's just because of the dust, animal pet hair slows down the fan

    Perform the illustrious below troubleshooting steps:

    Step 01. Turn off the laptop

    Step 02. Disconnect the power/AC adapter and also remove the battery too

    Step 03. Press and hold the power button of the laptop for a minute

    Step 04. Now re - insert the battery back in and plug again the power supply/adapter

    Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

    Step 06. Once you get the BIOS, please press F5 to load the default Installer for BIOS

    Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

    Step 08. Now please wait unit loads Windows and then stop the Netbook again

    Step 09. You need to clean all vents and openings that are really good with a can of compressed air

    Note: If you still get the same error, we need to replace the fan

    I highly recommend you Contact HP technical support immediately by phone to get help immediately to get your fan replaced and serviced by an authorized HP Certified Engineer Netbook

    Click on the link to check the status of warranty below
    http://tinyurl.com/6cf8qju

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you
    K N R K
    Although I am an employee of HP, I speak for myself and not for HP

  • ERROR MESSAGE "THE FAN DOES NOT.

    As my system there is this message on the screen-

    "The system has detected that a cooling fan does not work correctly.

    -(90B) SYSTEM FAN

    Continued operation is not recommended and can result in unpredictable behavior that may cause stop randomly, loss of data or damage the system as possible. The system will stop in 15 seconds. To avoid closing and continue the operation, press enter now. »

     

    it's hp pavilion g6 2016tx m Odel

    product not... B3H81PA #ACJ...

    I JUST UPDATED MY BIOS, BUT IT DIDN'T WORK... WHAT CAN I DO?

    Please, try the steps in the following link:

    HP laptops - system of fan (90 b) error message at startup
    This error indicates a problem with cooling fan and urgent attention is required.
  • Dell Inspiron N5110 CPU fan does not work

    Hello world

    I have a problem with a DELL Inspiron N5110.

    When I turn on the laptop, the fan runs for 15 seconds then it turns off by itself... but the Windows starts correctly, and other components work fine.

    I know that I can't use my laptop if the CPU fan does not work because it will overheat the cpu and the motherboard so...

    Could you please give me an advice?

    Thank you

    The fan will run at powerup self test time, and then won't turn on (or run at full speed) up to a set temperature is reached.

    Function that replaces the motherboard, check that the thermal pads have been replaced when the radiator has been removed from the system.  If this part was not replaced, the system will run very hot.

  • Satellite Pro C650 - cooling fan does not work

    My Satellite Pro C650 overheats and stops automatically within 20 minutes of leaving upwards. I checked the CPU fan and noticed that it does not turn upward, even if the laptop would become very hot. I tested the fan with a 9 volt battery and it works perfectly.

    Can someone tell me exactly what the problem is? And how to solve it.

    Thank you.

    > Can someone tell me exactly what the problem is?
    On this virtual path, no one can say with certainty what the problem is. We can only speculate what may be the problem.
    Usually, cooling fan starts immediately after starting the laptop slows down and offers the optimum temperature of material. After reading your ad I didn t understand how it works. He turns and there is no sign of life?
    Problem can be power.
    Cooling fan will be controlled by sensors of temperature and activity depends on the temperature of the material but if your machine cooling fan does not work, I imagine that there is no electric power.

    What do you think?

  • Satego X 200 - 21U: fan does not

    Good my X 200 - 21U Satego fan does not work, never.

    The symptoms for her overheating if there is a game with graphics more difficult and after 5 to 10 minutes it just turns off completely.
    It never all working temperature Vista and CPU, even though the game never exceeds 52 degrees C. So it should be the temperature of the GPU, that I can't control, which rises.

    The laptop itself is only about a month so there should not be any dust or dirt inside. I tried blowing into the fan, while the laptop was closed and there was no sign of dust coming out.

    My question is if there is a way to solve this problem by software means or what I need to send it in for repair?

    Thanks in advance

    Post edited by: 580xylo

    Hi friend

    If you still have as standard all toshiba drivers and not some drivers updated the site to third party Web, please click [HERE | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] to find the nearest available certified service partner in your country.

    Contact and send the machine for repair since your question looks like a hardware problem which shouldn´t be taken on the shoulder of light... :)

    Welcome them

  • System Restore does not-how do to adjust settings

    System Restore does not work on my laptop.
    It did not work because the new toshiba set by phone for me when I bought it.
    But now I formatted it and its not working yet.

    Any help on how to adjust the settings.

    Hello

    It's very easy
    First you should check if the system restore is not disabled on your laptop.
    This can be checked in the control-> system-> System Restore tab panel.

    You have to uncheck the option called turning off the coast of the the system restore on all drives.
    Please check if there is enough free space on the two drives for the files in system restore.
    In the settings you must set the disk space to use to the maximum!

    After restarting again you should start the System Restore tool and should create a system restore point.

    Good luck

Maybe you are looking for