ERROR MESSAGE "THE FAN DOES NOT.

Similar Questions

• Satellite Pro 6100: error message - cooling fan does not work

  Hello
  I have a SP6100 and it keeps giving me an error message about the cooling fan does not. Then he tells me to stop immediately and runs very slowly. The fan come on, but after three or four short bursts it stops and the message appears.
  Is it a mechanical problem with the fan? I took out the radiator and the fan, and it was clean and not sticky.
  What is a system problem? The BIOS has recently been updated.
  Should I just invest in a new cooling unit and if so where would I get one?
  Any help would be greatly appreciated!
  Thank you.

  Hello

  I recommend to contact the ASP (certified partner) because it can test your device and can do a diagnostic test.
  You can be sure that the laptop will be repaired correctly 100%.

• After a delayed start, several times I get the error message: "the server does not currently. Have you tried regular recommendations.

  I bought InDesign. > I downloaded the exe for CreativeCloud
  When I double click on this file > it takes time to start and then the progress bar stops after about 2-3 seconds >
  It then shows error I menitoned > gives me the opportunity to start or cancel > does not.
  I'm on a corporate network I guess. Educational institution

  Windows10
  
  

  Cloud of InDesign, or serial CS6?

  If CS6, try this Windows 10 Forums

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• installed pes 2013 on laptop when you select game get error message "video card does not meet the required specifications (GPU:VRAM 128 MB)" can anyone help?

  installed pes 2013 on laptop when you select game get error message "video card does not meet the required specifications (GPU:VRAM 128 MB)" can anyone help?

  This means what he says.  You do not have the minimum required VRAM.
  The minimum specs for the game is listed as 128 MB of VRAM, but is supposed to work
  on the graphics card integrated Intel 2000/3000.
  The amount of VIDEO memory dedicated on laptops is apparently determined by the FAB of the laptop.

  Without knowing which laptop, or if it is one that has a dedicated graphics card, I guess that your laptop uses integrated graphics that devotes too little of VRAM (64 MB?),
  If it does not the minimum requirement of 128 MB of VRAM.

• Satellite P850-30W - the fan does not work after returning from the mode "Eve"

  I have a Toshiba Satellite P850 30W with bios 1.90.

  Sometimes the fan does not work at all after back mode standby on windows 7.
  What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

  I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
  .. .This error could damage the laptop potentinally...
  to get the fan turns once again I have to restart windows

  anyone experienced this?
  I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

  > Sometimes the fan does not work at all after back mode standby on windows 7.
  > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  You said it's happened twice and only sometimes done this means that above all the fans are working well?
  In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

  I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

• HP 8600 over Error Message: paper detected does not match format of paper or type selected.

  HP Officejet Pro 8600 more

  Windows XP Pro, Windows 7 Pro

  Error message: paper detected does not match format of paper or type selected

  This error message appears on the printer display panel any time a custom paper size has been set up in Word (or any other application) and the format of paper & type was inserted in the Officejet Pro 8600 paper tray.  This error is generated by the printer regardless the orietation or margins or paper size settings in the document to match the paper size in the paper tray.  When you press 'OK' on the printer display panel, the printer ejects paper correctly.  Because this printer lacks a manual bypass tray, the custom paper is always inserted in the Tray1 and is the only book in this tray 1.  It's a simple tray 8600 more.

  What I am doing wrong?

  Your help is greatly appreciated.

  Unfortunately, you cannot print on a paper size "undefined" with printers. While the functionality is available in word, our printers do not recognize that the sizes of the main paper (these changes according to the country sometimes).

  The reason for this is because undefined paper sizes open the printer and the print job to a certain number of risks, including jams paper or misaligned printing. This is why the function is no more on HP printers.

  I recommend to find a type of traditional paper which is close to the size you want to print on and select in the layout of the print job as a workaround for this problem.

  I hope this helps!

• code 511 undetected fan and the fan does not turn or unraced where do replacement or is this question solfware

  code 511 undetected fan and the fan does not turn or did not run where do replacement or this question solfware please help

  [Moved from the community centre of Participation]

  Fan errors are usually hardware problems. There is a fan in the case including detector does not detect that it is available or spinning. This could be a problem with the real fan or the fan sensor.

  Does this have to do with? Are you talking about an error that is displayed by a Windows machine? If so, what version of Windows? When the error take? At boot time? Before or after that Windows allows you to open a session? When you provide no details, it is almost impossible for anyone to help.

• If I try and open an email with an attachment I get an error message: this file does not have a program associated with it for performing this action.

  If I try and open an email with an attachment I get an error message: this file does not have a program associated with it for performing this action. create an association in the folders option control panel.  Once there, I don't know where to go

  What is the attachment file extension? If you know what program should open with, just do the following.
   
  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: The appropriate program.
  6. check: always use the selected program to open this type of file.
  7. click on OK.
   
  This should allow you to open these attachments directly from email address now.

• When I try to print, I get a print error message and it does not print.

  Original title: wireless printing problem

  I can't print to my wireless network.  The printer is ready, but when I try to print I get a print error message and it does not print.  The printer is an Epson Artisan 710, and my computer is an ASUS K52F.

  Hello

  Have you tried printing so that plugged directly to the printer instead of use wireless. Just want to make sure that the printer is working correctly.

  In addition, what exactly the error message say?

• Error message: "Build signature does not match environment.

  Hello
  
  I had a problem when you try to access the same data to two different computers through the library of BerkeleyDB. I stored data in berkeley db to Machine_A. Then I copy the data to another machine Machine_B. When I try to open it again. It by the following error message:
  --------------------------------------------------------------------
  Create signature does not correspond to environment
  error in creating environment varialbe document 1
  --------------------------------------------------------------------
  The error message is raised by this code:
  Database db = env.openDatabase (null, null, dbName, dbConfig);
  
  
  The data are stored in native java code of Berkeley DB. In both machines, I used Berkeley DB 4.7.25.The berkeley db libraries are compiled independently on both machines. Machine_A is "Machine_A Linux 2.6.26 - 1-amd64 #1 SMP Sat Nov 8 18:25:23 UTC 2008 x86_64 GNU/Linux. Machine_B is "Linux MachineB 2.6.22 - 2-686 #1 SMP killed Aug 31 00:24:01 UTC 2007 i686 GNU/Linux",
  
  I guess the problem is because as the data itself contains version information. But it's ironic for me. The library is dependent on the computer because it is written in C, but the data must be dependent. Am I missing something?
  
  Thank you
  
  Marie-Claude

  Hello. Berkeley DB depends on having structures of uniform size for the life of the community, because these structures must be written and reading environment files. For this reason, each environment contains a signature of the size of the structure, and this stored signature is compared to a signature freshly calculated in open environment. My first guess as to why you see this error is that type sizes on Machine A (x86_64) don't match those of the Machine B (i686). To share files of the environment between 32 and 64-bit platforms, you will need to make sure that the library on the 64-bit platform uses 32-bit types sizes (4 bytes for example pointers, instead of 8-byte pointers.)

  Ben Schmeckpeper

• I get this error message 'The URL is not valid and cannot be loaded' when I try to go to Firefox home. I uninstalled the modules, uninstaleed and reinstalled a new fresh firefox which did not help

  I get the following error message 'The URL is not valid and cannot be loaded' when I try to go to firefox home. I uninstalled modules, uninstalled Firefox and then install a new version. Still have the problem.
  Thanks for the help

  This problem may be caused by a corrupt installation of Visual C++ or incomplete (several versions can be installed-by-side; SxS) it lacks certain runtime components (redistributable Packages), which depends on Firefox (problem with an embedded manifest file that specifies a specific runtime version).

  You need to install the missing components (for example, Redistrbutable end 2005 ++).

  • https://www.Microsoft.com/download/en/details.aspx?ID=5638
  • [908165/questions/908165] The URL is not valid and cannot be loaded
  • bug 713167 - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll

• Tecra M3-264: the fan does not stop

  Hello

  I have a labtop Toshiba Tecra M3 264, it's wonderful BUT,.
  The fan does not stop and this sound is a bit noisy in comparison with the other all I have.

  Is this normal in this model or should I take it to the service?

  Hello

  It is normal activity on new laptops cooling fan is very noticeable on older models. I recommend you to check what happen if you change the settings of cooling method in power management.

  By the way: allow the unit to take a breath. Make sure that the ventilation openings are free and that there is nothing that can stop the flow of air. If the vents are dirty and full of dust, it can also be responsible for cooling fans runs often and with a higher speed.

  Good bye

• Satellite Pro 4200 overheating because the fan does not work

  I have a satellite Pro 4200 and it keeps overheating because the fan does not work I went in and everything seems ok but then I power it upward but the fan does not work someone can help? all cables are connected the fan run at all.

  Hello

  And how to help her in this situation? If you are sure that it cooling fan doesn t work 100% needs to be replaced.
  By the way: did you clean the unit and remove the dust?

• Error: 0: the database does not accept a connection

  Hello

  We have EMP 11.1.2.1 and EAS worked very well. We applied successfully patches of SAE 13904635 and 13904640.

  However, after you apply the patch, we received the error

  Error: 0: the database does not accept a connection

  For example, when connect us to EAS and click the EssbaseCluster1 under "Essbase Server" node we don't get something, like the list of application as such. We just get the error log.

  What could be the problem, is there anything, we had to do after you apply the hotfix?

  The essbase server seems to be running so we can pull the reports in the workspace and all.

  Thanks for all the answers.

  Have a read of the following Oracle Support doc - "impossible to add or connect to an Essbase server in Essbase Administration Services (EAS):" error: 0 in Essbase Administration Services: the database does not accept a connection "or" "error: 105: Login with token at MaxlJni" "(Doc ID 1469492.1).

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Out of nowhere I get this error message "the application could not start properly (0xc000001g). Click OK ot close the application. "I have uninstalled and reinstalled several times.

  I nowhere hand, I get this error message "the application could not start properly (0xc000001g). Click OK ot close the application. "I have uninstalled and reinstalled several times.

  Hi Kingsberry and almathof,

  Please refer to this thread: Re: Premiere Pro 2015 won't open after the recent update

  Thank you

  Regalo