9900 screen orientation problem

Similar Questions

• Satellite C70 - A - 16 L - screen resolution problem

  Hello

  I recently had a screen resolution problem with my laptop (C70 - A - 16 L).
  The max screen resolution which is imparted to me is 1366 x 768, whereas before I think he used 1600 x 900.

  I tried the latest drivers, Bios, etc. and have also restored the operating system to a previous backup, as well as a new installation.
  I also tried to roll back to Windows 7 (with proper drivers). They all offer the same problem.

  This new maximum resolution display correctly - as if the LCD does not deal with the timings of 1366 x 768.
  I believe that the Panel is OK and the problem he reports the EDID information properly - to force windows to use the new resolution.

  Is there a download monitor.inf file that can be used to bypass the EDID reported by the Panel?

  Kind regards

  Antwist.

  If the right to display drver is usually installed everything should be OK.
  Have you installed Intel driver Toshiba download page 9.17.10.3062 version?

• 21.5 inches a month old iMac had a pink line down the screen-oriented...

  21.5 inches a month old iMac had a pink line down the screen-oriented...

  Return it to the store for assessment.   It is in the warranty period of 12 months, so it could be replaced if you insist that you are in the United Kingdom.   Otherwise it is covered by your warranty and is either replaced or repaired according to the countries.

• Screen touch problems when you use the converter

  We just bought an Envy 27 tilt to our Caravan for all the good characteristics that HP has and TV

  Cause sometimes will want to run the HP converter 12v 400 watt true sine wave.

  We tried this to find a problem, the computer functioned well but the touchscreen ran a muck and did not work as usual.

  So after much googling and some reading I'd like here to answer fo HP.

  As I can't believe, I'd be the first to come on this problem and want to put it all in one in a motor home.

  What I read, it could be a matter of dirty power of the inveter, but we thought we have purchase the best brand true sine wave, we could leave our guys of battery here in Australia.

  Any advice would be received with gratitude.

  Thanks Lou, first of all for your time and on the other hand for your thoughts and advice.

  We have it finally working outside a performance of the inverter with number.

  But I have to say without any worthy of official telephone hotline support of HP.

  Lou, I'm working through several of your suggestions, pending the official response to my survey on what brand or type of UPS or UPS I should use with my desire to tilt.

  Well, it is very sad that a massive company like HP with what you would think would be a very large R & D service, cannot answer a simple question, like what type of UPS or UPS if they recommend to work with the touchscreen of the tilt.

  The poor people, I was talking to, had no idea what I was talking about, or what I was trying to do. How a computer call center peason knows not what a UPS, I can understand on an inverter, but the tech people, these are things really very similar in the different boxes.

  OK, if you have this problem with your inverter and touch screen, first of all not all inverters are equal even in the same brand that I discovered. I want to thank my provider inverter & battery for their time and for allowing me to put in place the HP Envy of tilt on the back of their store and try different UPSs, inverters and batteries.

  I'll talk about brands here, not rat on the brand, but as it may be useful to someone else in Australia in the future. It seems that my "Epower DCAC 400w 12v true sine inverter" wasn't at the height when it came to clean AC power required to operate the touch screen without problem.

  In the end, we tried a "Epower DCAC 1000w true Sine Wave 12v', really just to give it a go, thinking it would be a better to be the same brand as the unit of 400w, well it worked quite OK

  This unit of true sine wave Epower 12 v 1000w, fixed our problem with touchscreen and ran HP Envy tilt as if it is running on AC power.

  If anyone is interested for camper here, I found this configuration to draw between 4 and 5 amperes of batteries of 12v and about 41 Watts @ runing 240 volts a you tube clip.

  Well it is my experiences and the final result, I hope this helps someone else in the future, I'm sure that HP will not be able to.

  Thank you all.

• My screen orientation is implemented alone

  This is all portrait view and I can't understand how files to see landscape. Help!

  Hello

  Try this link:
  http://forums.techguy.org/Windows-XP/475599-solved-changing-screen-orientation.html

• blue screen "possible problem with SPCMDCON. SYS

  all about office went< only="" program="" available="" and="" showing="" is="" mcafee=""> bed blue screen "possible problem with SPCMDCON. SYS '.  Hard drive reads accurately but very little available. Get pop up of the AV PROTECTION ONLINE DECLARING PAY 59.95 AND we will solve the problem. also the problem States is due KEYLOGGER ZEUS, please help

  Hello

  1. are you able to boot to the desktop?

  If you are able to boot to the desktop, run the antivirus scan and then run the System File Checker.

  Step 1: First we will analyze the system for infections using the Microsoft Security Scanner which can be downloaded from the link below:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Step 2: Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  (a) open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (b) type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If you are not able to boot to the desktop, please start the system in safe mode and follow the steps mentioned above.

• Screen resolution problem. Cannot set above 680 x 480.

  Screen resolution problem

  I have a dell latitude d630 2.5 GHz computer laptop under XP Professional 64-bit operating system.  The screen resolution will not be set above 680 x 480, and when I try to increase the computer stops with a black screen message that don't stay long enough onscreen to read.  Dell advised that they don't or support this machine with the XP operating system and that they have no drivers or other fixes for the problem.  I hope that you will be able to help and thank you.

  Hi dduck11,

  ·         What is the default screen of the laptop resolution?

  You need to update the graphics (video) drivers for the laptop. I see that there are Windows XP drivers available for the same thing. Download and install the updated drivers to see if it helps.

  Drivers & downloads for Latitude D630

• Desktop screen orientation

  How can I change my screen orientation? This isn't for printing, simply look at one. Press the wrong button and now have to turn on the computer side to read.

  Wednesday, August 11, 2010, 23:49:38 + 0000, mtngardenlady wrote:

  How can I change my screen orientation? This isn't for printing, simply look at one. Press the wrong button and now have to turn on the computer side to read.

  The ability to rotate the screen image is a feature of your video card, to help work with instructors who rotate the portrait orientation. Almost certainly you accidentally pressed Ctrl-Alt, and
  an arrow key.
  Rotate using these keys.

  Ken Blake

• To adapt to the screen orientation by using javascript (for playbook)

  Hi all

  I know that the subject of the screen orientation has been crossed many times already, but I've searched and searched in the webworks put on an answer and can't find it.

  My application is made for the landscape. I have 2 options. ((1) lock app in landscape which I think still can be done using webworks (but please correct me if I'm worng) or 2) to scale the app for the portrait.

  Because to my knowledge 1) cannot be done, I'll focus on 2). Has anyone seen or written a javascript/css script that checks if the user holds the tablet in landscape or portrait and adapt to the 2 on-the-fly switching of b/w? My app is made for 1024 x 600. I know it can evolve using CSS 0.6 starting to adapt to the screen, but I don't know how to check and then re - evolve afterwards with javascript.

  Any help, please and thank you.

  In fact, you can lock in landscape orientation with

  your config.Xml file. Just remove the space after "rim:" because I added it to prevent the Bulletin Board to return as , haha.

• 9900/9930 display problems

  Hi guys:

  I have question about new devices to 9900/9930.

  I'm developing an application using webworks. It works very well on OS5/OS6 as "BOLD" devices / torch. But when I test it on 9900, looks zoomed.

  Here are a few questions we get:

  1. Image size 640 * 100 is more enter the 9900 screen. I tested it on two simulators 9900/9930. Obtained similar results, i.e. image is off mobile screen. Width 400px image fits the screen.
  2. On the real device looks with 360px images fits the screen instead of 640px. If different behavior on the real device and Simulator.
  3. Also effect default hover on the purpose of the focus element does not work for me. If it is not supported for 9900 or I'm missing something.

  Here is the code I use to test.

  
         
         
         
         
     
     
         

  
            

  

  
             

  

  
         
        
         
  
  It is trial 640 PX
         
  
         
  
  It is trial 480 PX
         
  
         
  
  It's test 360 PX
         
  
         
  
             

  Lorem ipsum dolor sit amet, adipiscing elit computer. Surpassing restore risus condimentum,
  sit amet hendrerit urna sit amet hendrerit. Phasellus egestas urna non tellus lectus sit amet
  tempus erat volutpat. Amongst sed augue quis libero adipiscing so. CRAs vitae elementum nisi.

  
         
  
     

  Thank you

  Hi, thanks for the great questions.

  The content in question that you declare scale has to do with the existing window defined in your content and the resolution of the screen considerably increased of the 9900 Smartphone. By default, the rendering engine tries to standardize Web content to 'look' as it does on the other Smartphone BlackBerry (to reduce the impact to existing content).   However, this may have the side effect of return content that seems zoomed in too close according to the viewport.

  This is the window that you have:

  I suggest you use the following recommended viewport:

  Notice the addition of the "target-densitydpi property and the removal of the height property.»  This property indicates the rendering engine to recognize the increased device screen resolution and taken into account when you descale content on the screen.

  Hope that helps.

  Adam

  Relationships with developers

• The lock screen orientation

  How to lock the screen orientation in application of 10 Blackberry webworks? I want my app to always remain in fashion portrait.

  See the element of config.xml param/guidance here:
  https://developer.BlackBerry.com/HTML5/documentation/param_element.html

• Image of the scale when screen orientation change

  I'm putting an image when screen orientation change, I put the logic based on sublayout. However, it is called no effect. It works fine the first time. Then, when I incline simulator, not touch.

  BitmapField private;

  protected void sublayout (int maxWidth, maxHeight int ) {}

  Super.sublayout (maxWidth, maxHeight);

   

               if (width == Display.getWidth ())

  {

                  return;

  }

  on the other

  {

  width = Display.getWidth ();

  ctrHeadImg = ctrHeadImg.scaleImage32 (scaleXFixed32, scaleYFixed32);

  a = new BitmapField();

  a.setBitmap (ctrHeadImg.getBitmap ());

  loaded;

  layoutChild (, a.getBitmapWidth (), a.getBitmapHeight ());

  setPositionChild (, bitmap1.getLeft () + bitmap1.getBitmapWidth (), 0);

  ...................................

  setExtent (w, h);

  Can you elaborate on what you see?  What does not work?  Is called the scaleImage32 method?  The field is not be added to the screen or is the image not adjusted as desired?  What values are the scale by?

  I recommend having a look at this post.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=41782&query.ID=18...

• screen reader problems

  When you open the Yahoo home page, we get a distorted display. At the top it says problems screen reader, with line click on "disable auto updated pages" I click on it and most of the time that it takes me to a good Yahoo home page screen. Problem though is that I have to do it every time. I have lost the ability to get a good Yahoo homepage screen and forced to work to do every time I open Yahoo.

  I'm not sharing my information or be shared I know.

  How can I fix this please?

  Yahoo questions, ask Yahoo Tech Support.

  Here: http://help.yahoo.com/l/us/yahoo/search/

  http://en.Wikipedia.org/wiki/Screen_reader

  A simple search help and Support produced this one.

  Internet Explorer features, such as multimedia or page transitions, can cause screen readers to give confusing or incorrect information. Follow the steps below to disable the features that might interfere with screen readers.

  To make Internet Explorer work better with screen readers

  1. Click to open Internet Explorer.

  2. Click Tools and then click Internet Options.

  3. Click the Advanced tab.

  4. Make one or more of the following changes:

     • Place the cursor to follow the development of the screen

       If you want your screen reader or your magnifying glass to use the cursor (also referred to as theinsertion point or system caret) to determine whether to read or expand, follow these steps:

       Under accessibility, select move the slider system according to focus/selection box.

     • The text to display in place of the images

       Under accessibility, select him always expand Alt text for images of the box. UnderMultimedia, clear the show picture check box.

     • Stop page transitions causing erratic behavior in your player screen or voice recognition

       Under browsing, clear the Enable page transitions you use smooth scrolling check boxes.

       Under multimedia, clear the show picture and game animations in the checkboxes of the Web pages.

     • Help prevent the sounds of the Web page to interfere with your screen reader.

       Under multimedia, clear sounds in webpages box.

  5. Click OK.

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• Screen resolution problems (Windows 10)

  I downloaded the latest trial 9 Captivate for Windows 10 and screen resolution problems. Basically, making the software unusable. A lot of screens and dialog boxes seems larger than the current window, they are in, making the right and downstairs parts invisible window (usually, this is where the 'OK' and 'Cancel' buttons for example).

  I'm Captivate on a laptop running 64-bit Windows 10 (Sony Vaio with an NVidia GT 640 M map graphic with the latest drivers)

  Does anyone know how to fix this? Here are some examples:

  

  

  

  No retina.

  What is the size of the police on? Win10, it is often larger than 100%, which is not really necessary for your resolution, but that's a retina display. I am using Captivate on Win10, but Surface Pro and laptop have a retina display.

• Question of screen Orientation

  I can't understand how to change how the screen orientation changes when I move my x 201 laptop mode to Tablet mode. As it is, when I close it for a Tablet, the screen becomes portrait, however I would like to change to make it reverse landscape (i.e. the computer mode unlike portable 180 degrees).

  I studied the topic online and I can't find answers, does anyone know how to do this?

  -chris

  There are 2 methods to configure (assumes that you are using Windows 7):

  1. Go to control panel > Lenovo Tablet utility > Auto Screen Rotation.
     (be sure to this Menu Popup Tablet is installed, http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67219 )
  2. Go to control panel > Tablet PC settings > display (tab) > click on 'Go to Orientation', then you can see "Orientation sequence settings" there.