Similar Questions

• Want 4520: Hp Envy 4520 does not connect to the network

  4520 nine will recognize my home network and I put the password correctly, but it does not connect.  Went all out and under tension, but without success. Never had such a problem with other devices. I printed a diagnostic of the printer which suggests some issue with MAC address filtering on my sky router but have never enabled MAC address on my router filtering - a) would not have any idea how he b) have never had this problem with other devices then why now? Help please

  Hello

  Download and run the Installation Wizard of HP printer from the link below to install the printer wireless.

  www.HP.com/go/Tools

• HP Envy 120 does not connect to imac

  Hello

  I just started a problem - my iMac says it cannot connect to my printer and printing is not possible.

  Printing worked very well before, and it continues to work properly my ipad and iphone.

  I'm on Mavericks 10.9.2 and Safari version 7.0.2.

  My I connect wirelessy - my network is very good, the network on the printer test is very well and the fact that I can print from ipad & iphone indicates a problem with the Mac - any ideas I should check, please?

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• U2713HM, does not connect to Microsoft Wireless Display Adapter?

  I can't find instructions anywhere to connect this monitor to the graphics card.

  I hooked it up to my USB & HDMI on the bottom of the screen.

  I changed to import HDMI monitor.

  Said the Surface Pro 3 to connect

  He scanned for wireless screens and found nothing

  Pushed the reset button on Microsoft Wireless Display Adapter for 10 seconds

  I don't think that there is power to my USB ports.  Is there something I need to turn on the monitor to make this thing work?

  OK, according to ManuelU2713HM, upstream of U2713HM USB cable must be connected to a USB port on a computer.

  

  So if you have a laptop, connect the cable upstream U2713HM USB. Then test the Microsoft Wireless Adapter Display without the extension. Just use the U2713HM HDMI and USB.

• Hall 13: HP pavilion laptop does not connect to the printer HP envy range 7640

  My laptop does not connect to my HP envy printer. It keeps saying the driver is not available or is it ready, but does not connect. I know the printer is working because I can print from my phone. Anyone know the driver I need to download or what to do?

  Ruizgeraldine

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the problems with your Envy 7640 in Win10 printer and wanted to help.

  The problem is that by default HP print drivers installed by the upgrade of Win10 often do not work.  I have two HP printers and neither one worked after the Win10 upgrade.  We also receive a lot of messages of other people with the same problems.
  
  I linked the page drivers and software for the Win10 drivers for your printer: http://support.hp.com/us-en/drivers/selfservice/hp-envy-7640-e-all-in-one-printer-series/6617267/model/6617268#Z7_3054ICK0K8UDA0AQC11TA930C7

  You must download and install the full feature software and drivers for the printer.
  
  Then unplug the printer and install the software.
  
  Do reconnect the printer until the installation program invited to do so.
  
  Once the installation is complete, restart.
  
  You should then be able to use your printer in Win10.
  
  Good luck
  
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.
  Please click on the symbol of the thumbs-up to the left of the answer key to say thanks fopr my help.
  ========================================================================

• New HP Envy DV6 - 7202SE does not connect.

  Hi, I bought a HP Envy DV6 - 7202SE 2-3 weeks, everything was working fine and one day the Wireless does not work...

  All other devices in my house (IPAD, iphone, Android phones) thus communicate them with the Linksys WRT120N router, but my laptop does not connect.

  I tried with the network cable and he surfed the net fine, but the Wireless does not work.

  It also shows the name of the network in the list of available networks, but as soon as I connect it after you enter the authentication key, the connection is not successful.

  I even formatted the computer to its factory settings, but still it does not connect. I checked Device Manager and the drivers updated and everything goes well it... but it does not connect to this router. I tried to connect to my wireless router and it works perfectly... but with Linksys WRT120N router it has stopped working suddenly. Do I have to update the firmware?

  Kind regards

  Amir

  Disable the security on the router and connect temporarily without security.  If successful, go back and add WPA2-AES and try again.

• ENVY 5530:5530 does not connect to web services

  I bought a FANCY 5530 yesterday and followed the instructions for setting up wireless. It prints and scans. However, it does not connect to Web Services. One suggestion is that it may require a proxy server details: How can I get these details? I'm not aware that I use a proxy server for internet connection. What can I do, please?

  I am using Windows 7, 64 bit OS

  After a pratting very long on this labyrinthine web site, I was allowed to telephone support. The solution has been offered instantly, which suggests that it is certainly not unusual. Here's what to do:

  1 assuming you can communicate with your printer, open its IP address in the browser.

  2. Select the tab 'network '.

  3. Select "network address (IP)" in the list on the left.

  4. enter 8.8.8.8 as the preferred manual server.

  5. enter 8.8.4.4 as auxiliary manual DNS server.

  Which corrects the problem. Thanks to the lovely people I spoke with.

• Troubleshooting-new HP with Windows 7 spectrum XT, does not connect to the WiFi at home?

  So I just got my brand new HP ENVY spectrum XT Ultrabook with Windows 7 Home Premium installed. 64 bit. I start it, everything works fine, except that when I connect to my WiFi at home. I tried to connect, entered my password, but it does not connect. Also tried the easy connection on the router. No luck. I checked my old laptop which runs on Windows Vista to see if WiFi worked always, and this is where it gets interesting. I was able to browse the internet and internet worked, but suddenly Windows informed me that "another computer uses the same IP address" and it stops my internet capabilities on my old laptop. I connected my cable ethernet on both computers, and it works for both computers when it is plugged. While that plugged, I discovered that I could create my own IP address, which I did on my old laptop and so far that seems to have solved the problem. However, my DESIRE is always not connecting to WiFi. Any advice?

  Hi ZachRhodes3,

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  5 steps: how to set up your network wireless home

  For reference:

  How can I troubleshoot network card?

  Wireless network card: frequently asked questions

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• Messages does not connect to the Yahoo IM account?

  Messages app v9.2, currently works very well with my Google account and iMessage, also worked with my Yahoo Messenger account, but recently (today?) does not connect to it.

  I know that Yahoo has made changes to their Instant Messaging System. This change affected only Messages?

  Hello

  I can't connect either (I didn't realize that I do not use)

  However going on the Yahoo Site and change the password does nothing.

  With the help of their option 'insecure Apps' does nothing no more (there was an email saying I was using access to messaging through an unsafe application - but I have not used their messaging service for a very long time.)

  It does say read more suggests, is not Mail (after OS X 10.9 is OK)

  He does not on access to their e-mail service.

  There is no option in Messages to try to activate disable SSL you can with AIM or Jabber accounts

  I have looked in the help (a little) but still found nothing.

  

  20:49 Tuesday. October 4, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• iPhone 5 sec Bluetooth does not connect

  My 5s Bluetooth iphone works fine one day, the next day it does not connect to my Boise, helmet or Fitbit.   My Bluetooth is on, I have it enabled or disabled and you have rebooted my phone.  I have updated to IOS 10.0.2.

  I was able to pair with my ipad.

  Hello

  Try the procedure described in this article to support > get help to connect a Bluetooth device accessory with your iPhone, iPad or iPod touch - Apple Support

• Bluetooth does not connect on iOS 10 and sierra OS

  I just bought an iphone 7, Apple Watch 2 and I updated my computer to sierra yesterday.

  I wanted to do the auto unlock with my watch, but my phone does not connect to the Mac with bluetooth. He wants to connect and the phone is displayed in the bluetooth settings, it says on my phone to pair if the numbers are the same, and then he "fails to connect. so im lost and I can't use my watch.

  I have reset my watch (by unpairing), iphone (by resetting all settings) and rebooted my computer.

  It seems that the "it just works era" is over for apple.

  If misery loves company, I'm here!  Just posted my new iphone 7 + setting BLUETOOTH is not 'discover' one of my devices (in 2015 Lexus and Bose radio/speakers).  In addition my iPad and iPad air are also not 'discover' devices!  I think that this happened once I installed the latest ios 10.0.2 software on all my devices.  Please reply if you receive some 'advice' from someone in the "know"!  Thank you!

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• Thunderbird does not connect with the server

  Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

  Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.

• IMAP e-mail accounts does not connect

  Just recently my iCloud, Gmail and Outlook IMAP accounts does not connect through the app Apple Mail on my MacBook Pro running 10.11.6. I get a popup error message and exclamation points appear next to each account that States the unable to connect to the server application. IPhone & iPad with the same accounts are fine, just my Macbook Pro has this problem. Connection Internet is fine. Suggestions?

  Please read If you cannot send or receive e-mails on your Mac - Apple Support.