A 200 - 3 small buttons by the power button has stopped working

Win XP, SP2, 1 GB memory, nothing too special.

These cute little buttons have stopped pulling up of software. The only function seems to work is that next to the switch lights up the machine!

Any ideas?

The only recent change is that I've recently updated Microsoft Office 2003.

The buttons ARE set to launch software.

Hello

Well, I put t know why it doesn't work, but these 3 small buttons are controls of Toshiba.
Have you tried to update the driver controls? You can find it on the Web from Toshiba site

http://EU.computers.Toshiba-Europe.com and support & downloads.

In addition, you can check the settings. I m not sure but I think you can find them in the Panel.

Good bye

Tags: Toshiba

Similar Questions

  • Airplane mode button has stopped working on the Yoga 2 13

    Hi all

    I'm a new Member here.

    I'm happy witm my new Yoga 2 13, but the airplane mode button has stopped working. Don't know when, but could be well after the update. Everything else works well.

    No idea how cold I do?

    Thanx

    Make sure Utility.exe is running on your computer. It is part of the Energy Manager program.

  • Iusually access my mail through the mail on my keyboard button. This button has stopped working completely, and I don't know how to access my mail at all. How can I get to my email?

    Iusually access my mail through the mail on my keyboard button.  This button has stopped working completely, and I don't know how to access my mail at all.  How can I get to my email?

     
     
    In case you wanted to tell Outlook Express...
     
    Right click on the desktop | New | Shortcut. Navigate to "c:\program files\outlook express\msimn.exe". Click next | Click Finish.  It will be a new shortcut on the desktop.
     
     
    Once an icon on the desktop, you can drag it to the taskbar for easy access.
  • The delete button has stopped working in Outlook Express 6.

    Outlook express delete failed

    The delete button has stopped working in Outlook Express 6. Empty the file deletion was without help. How can I make it work again? Also I can't manually move an email in the folder to delete.  Any suggestions?

    Your deleted items folder is probably corrupted.  Close OE and delete the deleted items.dbx file.  OE will make a new and that should fix the problem.  Its a good time to save your messages if the records are get damaged.  You may lose all your messages.  See www.oehelp.com/OETips.aspx#6

    Steve

  • After execution of the new updated Adobe, HP Elitebook 2760p left click on the touchpad button has stopped working.

    Original title: left click not working not not on HP laptop

    On my HP Elitebook 2760p running Windows 7 Pro 64 bit, left click on the touchpad button has stopped working.  The right click works, the works of pad, (scrolling and click on) it's just the left click.  It started after the execution of the new update of adobe. I tried to uninstall and reinstall the driver synaptec. I tried the mouse fast and slow speed. I tried pressing rigid, flexible, in different places. I would try to uninstall the update from Adobe, but it won't allow me.  So I uninstalled Adobe Reader and re-installed. Still nothing. Any suggestions?

    Hi cyrilmillot,

    You try to run the Adobe Reader removal tool to remove the Adobe reader completely the system software.

    See the link to Adobe to download the removal tool:

    Adobe Reader/Acrobat removal tool

    After retiring, you can check whether the left click works. If it does not, you could get in touch with Adobe support for further assistance on this topic:

    Adobe forums

    http://helpx.Adobe.com/support/

    If the problem persists, then it may be a hardware problem and you may have to contact HP support for further assistance:

    HP support

    HP laptops - use and configure the TouchPad (Windows 7 and Vista)

  • The program executable has stopped working

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with... of programs a SSC downloaded for smpt installation
    • Error messages. the program executable has stopped working... a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available
    • Recent changes to your computer. None
    • What you have already tried to fix the problem.no I don't know what to do

    Confirmed that the program is compatible with your version of Vista and the hardware in your computer? http://www.microsoft.com/windows/compatibility/windows-vista/.

    You can try to uninstall the program, download a clean copy (in case where the original has been altered) and re - install the new download and then see if the program works.  If this does not help, try right-clicking on the executable and click on run as administrator and see if that makes a difference.

    I hope this helps.  If this isn't the case, follow the advice implied by Malke response and contact technical support by the manufacturer of software for assistance.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • My new records button has stopped working. How can I fix it? Win 7

    I run Windows 7 and my new records button has stopped working. How can I solve this problem

    Click Start
    Type: CMD, according to the results, right-click CMD
    Click on "Run as Administrator"
    At the command prompt, type: sfc/scannow

    This will check for any breach of integrity

    Restart your system

  • Power Manager has stopped working - BadImageFormatException - resolved

    Moderator note: there is no way to mark a simple/first post as "resolved." I moved from belgam sabermanat 2nd position so it can be tagged accordingly.

    Thanks for the report.

    Z.

    Tale of woe and recovery.

    I recently acquired an i7 ThinkPad x 201 with 8 GB of RAM and 500 GB drive

    I did a fresh install of WIndows 7 Ultimate x 64 with SP1

    I ran Windows Update and applied the fixes about 80 - all the critics and most of the other

    I downloaded the Lenovo system update and install everything except the BIOS updated as the current BIOS is identical to my other x 201 BIOS Version 1.37 (6QET67WW) - I prefer not to do an update of the BIOS, unless absolutely necessary.

    The Manager toolbar of power present in the taskbar, but I can't start to eat.  Or I can it starts application tools ThinkVantage or by pressing Fn - F3.

    Each of them immediately to bring up a Windows error dialog box that says Power Manager has stopped working.  The splash screen appear not at all.  The details are:

    Description:
    Stopped working

    Signature of the problem:
    Problem event name: CLR20r3
    Signature of the problem 01: pwmui.exe
    Signature of the problem 02: 1.0.0.0
    Signature of the problem 03: 4f626f8a
    Signature of the problem 04: PWMUI
    Signature of the problem 05: 1.0.0.0
    Signature of the 06 problem: 4f626f8a
    Signature of the 07:378 problem
    Signature of the 08:0 problem
    Signature of the problem 09: System.BadImageFormatException
    OS version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033

    The Version of the file is the same as my other x 201 (1.0.0.0), but the closing date is Thursday, March 15, 2012 02:53:40 while on my other machine is October 3, 2011 23:01:27.  The update is also 15/03/2012 whereas the other machine is 04/10/2011.  It seems that Lenovo rebuilt the package in March 2012.  Manager supply on the other machine says it's 3.64.  The Lenovo site (http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-61432#power) lists 3.64 but when you go to the download page it says it's 6.07.  I tried to uninstall Power Manager and install the 3.64 one from the download site.  The same problem.  Finally, I uninstalled the power manager and installed the 3.40 version I downloaded when I got to the other machine.

    So, how Lenovo released a package with a picture of the wrong file?

  • "Power Manager has stopped working" on Win7 X120e

    Operating system: Win7 (mainly so far)

    BIOS version: 1.17

    Power man: 6.45

    When you click on the taskbar icon, Power Manager will not open, which gives "Power Manager has stopped working". This has been the case for quite a while and I have struggled to find someone with the same problem that could signal a problem.

    I tried to uninstall and install most of the versions of the Manager of power until later. I have the latest version of the BIOS of the machine and Win7 is the most up-to-date (except for the most recent updates).

    I would like to be able to handle the power supply via the Power Manager options. Any ideas?

    Thank you, very much appreciated.

    It turns out, after much more research, than the .net framework necessary updated. Windows Update sorts basically this - could do with some official documents on that?

    So a simple fix in the end.

  • I get the message "firefox has stopped working" after closing browser

    Hello.

    My problem is that when I close the FireFox browser, I get the message "FireFox has stopped working". It's pretty boring. I have read some other posts here that describes a similar problem and we tried some of the suggestions in them including:

    A clean install, a reset of the browser, running in safe mode, uncheck hardware acceleration, disabling Extensions and plugins one at a time, uninstall my antivirus (avast), backward to 23.01 and audit version run in compatibility mode that someone claims to be helped. None of this has been effective.

    It seems that after a reboot of the computer, the browser will be ok for 2-4 closures and then it will start by the message at each end. In addition, after uninstalling avast was good for 6 closures. Roll back also gave me approximately 6 free message closures. But then, the messages and does not stop.

    Is there anything else I can try? Thanks in advance for your suggestions.


  • Satellite L500D-144 - CCC of the host Application has stopped working

    Ladies and gentlemen,

    My PSLT6E - 007004GR is almost a year.
    This month, there was an update - possibly to leave Microsoft - and since then popt always at startup in Windows 7 this window and look for solutions:
    Catalyst Control Center. The host Application has stopped working, it is looking for a solution.

    A new installation of the driver graphics card and Catalyst Control Center has not changed. Instead, a standard Microsoft graphics card driver is installed.
    Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
    Is it reproducible.

    Have already reported more customers or I'm the first?

    What can you do to the problem?

    Sincerely,

    CBluebaerchen

    Hello

    > Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
    To do this the display of Windows Update driver update?

    If so, restore the system to an earlier point and disable this update of the display driver and choose only the updates of Windows. That s enough.

    Otherwise, you can try running CCleaner. It can clean and fix registry problems.

  • SyncUp software displays the message "SyncUp has stopped working".

    SyncUp software displays the message "SyncUp has stopped working" what can I do to fix this? Thank you

    Hello

    1. what operating system are you using on your computer?

    2. What is the brand and model of your computer?

    3. it worked very well on your system before? If Yes, you did it all software or hardware change before the show?

    Method 1

    I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

    Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

    How to solve the problem by running the clean boot in Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

    Method 2

    Uninstall and reinstall the software SyncUp.

    Uninstall or change a program
    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    Note: Uninstalling the software will erase all the data associated with it. You must redo all favorite and set up anywhere after settings put it back.

    THIRD PARTY WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    See the following help link:

    http://en.community.Dell.com/support-forums/software-OS/f/3526/t/19391777.aspx

    It will be useful.

  • Why my Catalyst Center: the host application has stopped working?

    When I log on my computer, a window opens in two separate occasions stating that Catalyst Center: the host application has stopped working... How can this be repaired?

    Hi Missy,

    This probably isn't a problem MSE or malware.  It could be a problem with the video software (which is otherwise commonly) and I have it on my system as well for my ATI graphics card.

    This just started recently - as the last day or more?  If so, try a system restore to before it started to see if that helps. If you use Windows 7, seehttp://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, seehttp://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, seehttp://support.microsoft.com/kb/306084. Sometimes this simple process made the rounds and sometimes that doesn't help - but it is easy and worth if she has recently begun.

    Good luck!

    Kosh

  • DSC - H3 works including fine arise of the Flash but the flash itself has stopped working?

    Hello

    My Sony DSC - H3 cybershot camera works fine with popping up the flash but the flash itself has stopped working. It appears, but no flash light. I checked all the settings are fine and its mode in which it should be flashing.

    The camera works perfectly fine, except for the flash is not working. It looks like a grilled "bulb". Could it be? Or is it something else?

    What can I do? Can you please help.

    Thank you very much

    Hi, my Sony cybershot camera DSC - H3 works fine with popping up the flash but the flash itself has stopped working. It appears, but no flash light. I checked all the settings are fine and its mode in which it should be flashing. The camera works perfectly fine, except for the flash is not working. It looks like a grilled "bulb". Could it be? Or is it something else? What can I do? Can you please help. Thank you very much

  • The Windows Firewall has stopped working, 0x8007042c error code

    The Windows Firewall has stopped working.

    See if this helps: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/firewall-will-not-turn-on/57a4cce5-835f-e011-8dfc-68b599b31bf5

  • I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working

    original title: setupexe has stopped working

    I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working, windows will find a response and advise. Nothing happens. What should I do to install the soul?

    Hello

    ·         The game you are trying to install?

    ·         You are able to install other programs?

    ·         The specification of the computer meets the requirements for the installation of this game?

    Step 1: Check if the game is compatible with Windows Vista.

    Windows Vista Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx

    Step 2: Try to copy the contents of the DVD on the desktop. Then install the game.

Maybe you are looking for

  • Size update iOS 9.3.5?

    What is the size of the update ios 9.3.5 supposed to be? I have connected my iphone 5 c to my macbook, open itunes, and itunes prompted me to download the update. The size of the update said 1.59 GB. I read that this is only supposed to be between 30

  • SOLUTION - How to use the remote on the Satellite X 200 with Win7 64 bit

    Here is the description how to use the remote control on the Satellite X 200-2 b with Windows 7 64 bit.

  • Translator dropdown missing

    I looked at the Skype could translate into different languages, and there were a couple empty languages, so I was curious as to what they were doing. After I chose to translate into the language as it was, the menu drop-down disappeared and I could n

  • Hearing aids and this TV

    My Sony XBR55X850B arrived the other day, and this morning I tried to set up my sound. I wear hearing aids and have a gadget that puts the sound of television through my hearing aids. With my old Mitsubishi, I took the sound of my cable box from Cox

  • Satellite A205 battery-apply the final configuration

    Hi I have toshiba a205 and try to reformat using the original recovery CD, but it is stuck at the screen "apply configuration final please wait ' and waited 4 hours. /Advice any help will be appreciated. Thank you