Power Manager has stopped working - BadImageFormatException - resolved

Similar Questions

• "Power Manager has stopped working" on Win7 X120e

  Operating system: Win7 (mainly so far)

  BIOS version: 1.17

  Power man: 6.45

  When you click on the taskbar icon, Power Manager will not open, which gives "Power Manager has stopped working". This has been the case for quite a while and I have struggled to find someone with the same problem that could signal a problem.

  I tried to uninstall and install most of the versions of the Manager of power until later. I have the latest version of the BIOS of the machine and Win7 is the most up-to-date (except for the most recent updates).

  I would like to be able to handle the power supply via the Power Manager options. Any ideas?

  Thank you, very much appreciated.

  It turns out, after much more research, than the .net framework necessary updated. Windows Update sorts basically this - could do with some official documents on that?

  So a simple fix in the end.

• Desktop Window Manager has stopped working and was closed

  One of our machines (HP Pavilion dv7 Notebook PC running Windows Vista x 64) will receive the error "Desktop Window Manager has stopped working and was closed" with lots of close error. He reappears (as well as all windows flasher to non-aero, then back to aero) in a few minutes, spends about 5 times per hour.

  I did some research on this and have already taken the following measures without a bit of luck:

  1 run the command chkdsk / SFC scan - nothing found via chkdsk, SFC found some issues fixed, and some, it did not set. Them that it solves not all related to Windows Sidebar, which I do not / does not start.

  2. put updated drivers for ATI Radeon 3200HD - this had a lot of new questions. Installing caused newer drivers ATI catalyst to no longer work with errors during installation and popup errors at startup. After trying several solutions workaround to try to get installed it, I ended up coming back to the driver that came with the laptop, that are properly installed and working without error. I am skeptical of update of this stable driver as a solution to the dwm.exe error.

  3. this problem just started yesterday, that occur with not a lot of changes. Other than updates of windows (I think that .NET framework and a few other updates installed), I replaced NOD32 antivirus with Bitdefender antivirus. The system was stable with bitdefender for about 2 weeks, so I'm not convinced that this program is causing the error.

  4. the event viewer shows the following:

  Failing application Dwm.exe, version 6.0.6002.18005, time stamp 0x49e02696, failed module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0 x 80000003, offset 0x00000000000461f0, process id 0 x 124 error, start the application time 0x01cea0365a457adc.

  Offset, process id and start on time all vary, but there are a lot of these application errors in the viewer all screaming Dwm.exe like the failing application.

  What should be my next course of action?

  You do not receive an error but a caveat. NTStatus results (the set of codes execption used by ntdll - the failed module) begin to 0 for no error, 4 for information (you should never see this), 8 for putting guard and C for error.

  It's your specific error.

  //
  MessageId: STATUS_BREAKPOINT
  //
  MessageText:
  //
  EXCEPTION {}
  Breakpoint
  A breakpoint has been reached.
  //
  #define STATUS_BREAKPOINT ((NTSTATUS) 0x80000003L) / / winnt

  Problem is, you shouldn't have breakpoints. Breakpoints are set by debuggers and stop the execution of the program to the State of the program can be examined. There should be no breakpoints in a retail system. More breakpoints are inserted into memory during execution of the program in a debugger. They tend not to do in the actual file.

  So here are two assumptions, either you have no exit code, IE test code (driver?). Or you have a running program that behaves like a debugger (which is suspect).

  Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

  Clean boot

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.

   

  Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.

  
  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.

  Reset. If this resolves your wake problem half of the items until you find the one that.

  Safe mode

  If the above does not help.

  Click Start - all programs - Accessories - run and type
   

  msconfig
  

   
  Go to the Startup tab, and then click Start. Reset. Come back here and uncheck the box secure start to return to normal mode.

• My 'delivery manager' has stopped working

  My Delivery Manager has stopped working, or if my computer says.
  What this means, and can it be resolved?
  If this affects my printer, which now prints intermittently and has done for about the same time as the message started appearing?
  The one you have ideas?

  http://thewinforums.com/topic/27575-media-playerdelivery-Manager-problem/

  "Delivery Manager has stopped working".

  "Yesterday, that Vista has informed me of a solution to a problem earlier, an update of Kontiki. Like a fool, I installed and got the boot after message above.

  Solution that worked for me in the past is to remove the BBC iPlayer.

  http://www.google.com.au/search?hl=en&source=HP&q=My+%27delivery+Manager%27+Has+Stopped+Working&btnG=Google+Search&Meta=&aq=f&OQ=

  Read the above, Google hits.

  See you soon.
  Mick Murphy - Microsoft partner

• Problem: Data Manager has stopped working

  "data manager has stopped working" it's the pop-up window that appears everytime I open my laptop. I always click on the solution on the net but nothing happens. How to stop or fix this problem. I use windows7.

  Hello

  1. What is the number of brand and model of the computer?

  2 have you made any changes to the computer before the show?

  3. have you installed Data Manager?

  Follow the mentioned methods:

  Method 1:

   

  Step 1: Check in safe mode

   

   

  You can also check if the problem persists in safe mode.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If you are able to see the start icon, then executes the method 2.

   

  Step 2: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2: Uninstall and reinstall data manager if it is installed and check

  Uninstall or change a program:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  I hope that the above information is useful!

• Adobe Download Manager has stopped working. This is the message I get

  I still use google chrome with my Windows Vista PC. Usually plugin chrome automatically updates the latest version of adobe flash player. Sites, I will say that I have to update and head for the download of adobe. I deselect Mccaffee and then try to download. I have to Save it and then click on run, etc., but the installation stops with a message that "Adobe Download Manager has stopped working" and then another message "I want to report to Microsoft", etc..

  I have

  tried several times to install but I can't. I called Microsoft and they offered the Adobe phone number. (I always use my webrootsecure but I disabled it once to see if it would help the download/install new update of adobe Flash Player, but that did not work either) I don't have all the cover or subscription from Microsoft at the moment, btw.

  (I even know the category in which post this question)

  If Chrome Support/updates being arrested was not involved in your original question of Flash Player, that's what I would have advised you to do.

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  See you soon.

• Center Store Update Windows Media Manager has stopped working?

  Lately when I start my computer, I get this error message Windows media Center Store Update Manager has stopped working. Its happens after about 10 or 20 Minutes. At first I didn't think much, but now I noticed that the Media Center window is no longer the recording programs, I have planned. The strange thing is when I go into Windows Media Center display at the request, he says that he record but is not. The error message also appears when I try to update the guide, what happens to about 80%, then the message.

  Here are the details of the error message

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: mcupdate. EXE
  Application version: 6.1.1000.18307
  Application timestamp: 4b15b191
  Fault Module name: KERNEL32.dll
  Fault Module Version: 6.0.6002.18449
  Timestamp of Module error: 4da47967
  Exception code: e0434f4d
  Exception offset: 0003fc 56
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
   
  Can someone tell me what that?

  http://support.Microsoft.com/kb/935685

• continue to spread the message ' desktop window manager has stopped working and was closed ".

  continue to spread the message ' desktop window manager has stopped working and was closed ".

  The office then blinks and I can't use the Aero feature.

  Any correction or known issues?

  Thank you
  in2stocks

  Hello
  It is usually a video driver issue. Would like to know what controller you have and see if the manufacturer has a new driver for Vista.
  Please let us know if that was the issue.

  Mark <> Microsoft Partner

• Desktop Window Manager has stopped working after installing Defender Pro 2012 5 in 1

  Hello

  My father has a Windows Vista. It works very well. Until we installed Defender Pro 2012 5 in 1,

  It was a bit slow... the screen flickers of its lights for a few seconds every 10 minutes, I get this... I already have contact Defender Pro, and they said that it was not their fault.

  Help, please!

  DESKTOP WINDOW MANAGER HAS STOPPED WORKING
  Windows can check online for a solution to the problem

  -> online and are looking for a solution (recommended)
  -> close

  APPCRASH
  Application name: Dwm.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e02696
  Fault Module name: ntdll.dll
  Fault Module Version: 6.0.6002.18327
  Timestamp of Module error: 4cb74dd3
  Exception code: 80000003
  Exception offset: 0000000000045f00
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: 0fef
  More information 2: 0d8b4b37a0c1e529a7398b6615cc3528
  Additional information 3: f196
  Additional information 4: acf765d48a0657c8822f379a6b5f3b91

  Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Sorry to tell you,

  I already solved the problem.

  Just to let you know, I buy the product, because

  I used the free and they don't really work (IN MY OPINION).

  Anyone has this PROBLEM (appcrash)

  Go to start

  Click on Control Panel

  go to appearance and personalization

  Click on appearance color of windows.

  then click on settings in the appearance of progress.

  under the gaze of point for the theme of basic or something like that.

  Want more info on Dwm.exe?

  Click here-> http://www.howtogeek.com/howto/windows-vista/what-is-dwmexe-and-why-is-it-running/

• in Vista, the Service Manager has stopped working

  I get a window saying delivery Manager has stopped working to come

  Hello

  ·          Will there be any changes made prior to this issue?

  I suggest you try the steps mentioned below.

  Step 1: Test in safe mode problem

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: Perform a clean boot, if the problem does not occur in Mode without failure.

  A clean boot helps eliminate software conflicts. Visit the link below to learn how to perform a clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

  Additional information:

  Details of the event log

  Whenever you encounter this kind of problem, please check the event logs for details of the exact problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• Microsoft Picture Manager has stopped working I am facing this problem two previous hours__

  Microsoft Picture Manager has stopped working, I faced this problem two previous hours.when I open programs view massage on screen photo managrt has stopped working

  Hi Araud,

  What programs do you speak? Remember to make changes to the computer before this problem?

  This problem can occur because of no present conflicts of Microsoft programs on the computer, I suggest you try the following steps:

  Step 1: Put the computer to clean and test start

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WIN8 64bits - Recovery manager has stopped working error message

  Hello world. Just bought a computer laptop 1310sa m6 with envy. I tried to create a rescue disk set by using the Recovery Manager. It does not start, just gives the error message "Recovery Manager has stopped working." and then informs me that windows is collecting information and inform me a solution... Being that this machine is only 2 days is a bit much that parties do not work, in my opinion, one most important parts who! Has anyone encountered this and y at - it a solution?

  I tried to do a shadow with an O & O 7 disc image, works fine, but could not create a boot disk for a reason any (and Yes, I was using a 64-bit program!)

  Any help and advice would be accepted with gratitude

  JUST found the solution! DON'T bother with the HP Utility App Center. Go to search and type 'recover' and it will give you the option to create rescue disks... And it worked on my computer without any error message

• Desktop Window Manager has stopped working after loading of updates 12/10/10 MS

  Once the download and installation of updates for Windows 12/10/10 patches, Desktop Window Manager has stopped working.  Event viewer lists under Applications:

  Name: Application
  Source: Application error
  Date: 2010-10-13 09:59:47
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: has
  Description:
  The failing application name: Dwm.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc541
  The failed module name: nvwgf2umx.dll, version: 8.17.12.5922, time stamp: 0x4c5424d5
  Exception code: 0xc0000005
  Offset: 0x000000000007c160
  ID of the process failed: 0xb0c
  Start time of application vulnerabilities: 0x01cb6aefa117a51c
  The failing application path: C:\Windows\system32\Dwm.exe
  Path of the failing module: C:\Windows\system32\nvwgf2umx.dll
  Report ID: e6dfd048-d6e2-11df-9660-00271383b7fe

  The operating system is Win 7 x 64.  Video card is a Gigabyte GTS450OC1 with its latest driver running on an Intel DP55KG MB with 8 GB memory Corsair XMS3.  The system was fully functional and stable immediately before the update.  I don't know which of the 18 patches is in conflict with the nvwgf2umx.dll file.  Device Manager reports no hardware problem with any component.

  In my attempts to solve the problem, I run chkdsk f, sfc/scannow (which have reported no problem) and reloaded the video driver (without uninstall first).   Nothing works so far.  I even tried to defragment the master file with Diskeeper 2010 start time Table Defragger (based on another post, I've found), also without success.

  What is the reference for this?

  This may seem like the thing the more janky to post, but I got the same error several months:

  Problem event name: APPCRASH

  Application name: Dwm.exe

  Application version: 6.1.7600.16385

  Application timestamp: 4a5bc541

  Fault Module name: nvwgf2umx.dll

  Fault Module Version: 9.18.13.1422

  Timestamp of Module error: 51427a 68

  Exception code: c0000005

  Exception offset: 000000000013fe0b

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1033

  Additional information 1: bd9d

  More information 2: bd9dfb84ef7bbf0c089fd3d5f079469b

  Additional information 3: ec39

  Additional information 4: ec39233315f018bea3fd5d4de7e9458f
  And could not cancel the record/re-record the dll it error out on an entry point missing or whatever.
  So what for some reason any worked for me is to rename C:\Windows\System32\nvwgf2umx.dll to nvwgf2umx.dll.bak (all other copies of this file are in the folder DriverStore).
  After that, I ran from an administrator command prompt
  net stop uxsms
  net start uxsms
  
  
  And miraculously all started working again.  I'm running a GTX570 with latest drivers nvidia from Scripture.
  Note: You probably shouldn't be move/rename things in System32 unless you are confident and have your data backed up.  It worked for me, but who knows you.

• my driver manager has stopped working, it does not support ordinary ordinary style, how can I solve this?

  my driver manager has stopped working, it says it does not support the regular style, how fix that and what would have made that happen?

  What driver manager?

  If this is the third part of drivermanager.com utility you should not use such utility, nor any who claim to "SpeedUpMyPc"

  All these utilities can in the trash worst case your system

• Smartphones from blackBerry Desktop Manager has stopped working

  "Desktop Manager has stopped working", that's what I get when trying to sync my curve.  He will get through the address book but stops each time on the calendar.  Any suggestions?

  Hmm. Maybe it's something in your Calendar database is corrupted. Your device has never been synchronized before? There is a way to clear the Calendar database. So if you have your device to sync with Outlook, after it is cleared from the BlackBerry, you can try to synchronize again.

  To clear the Calendar database, you can go to the Office Manager. Backup and restore | Advanced. On the right, select the Calendar database and click the clear button. Then try to synchronize again