a anonymox reliable enough to "Enter anonymox.profiles as a filter"?

Similar Questions

• TMac new user: I installed lighthouse to my Admin profile and see no light in my user profile.  It's a new stand-alone Mac computer.  How do I enter other profiles on this PC (Mac) Headlight?

  TMac new user: I installed lighthouse to my Admin profile and see no light in my user profile.  It's a new stand-alone Mac computer.  How do I enter other profiles on this PC (Mac) Headlight?

  Thanks Ned,.

  This is new for me. The name is LightRoom.

  I found the solution: install in each profile using the same numbers of activation.  Seems OK now.  Thanks again.

• Enough to enter serial No. trial to purchase?

  I used LR3 beta, then the trial version 30 days of LR3. Now, I bought LR3 and received LR3 on a disc.

  I just entered my serial number trial version. Is that enough or is it better to install the software from the disk?

  The trial version is the same as on the drive... you're good to go...

• Enter the profile "old_password" function check...

  Environment: Oracle EE on Solaris 10 < something > 11.2.0.3
  
  I am currently using a slightly modified version of the provided password check operation seen in $ORACLE_HOME/rdbms/admin/utlpwdmg.sql to verify new passwords. I need to add logic that checks the new password change in addition to 'x' characters, in my case 4 four.
  
  Of course, I can do if I use a script that calls for the old password and the new password.
  
  However, I would like to have the password to verify the function specified in the profile of the user, so it will be invoked if anyone executes a 'ALTER USER... "to tell SQL * more.
  
  Even if there is an entry for the old password setting, when the function is specified in the profile, the past old_password parameter is always passed as a NULL value.
  
  Is it possible to get the old password sent to the audit function to compare with the new?
  
  I guess it must be clear to the verification of the character.
  
  All available to show a typical auditor than the new passwords have been changed by at least four 4 characters when the password is changed by using all means available workarounds like SQL * Plus, SQL * Developer, TOAD, etc..
  
  Thank you much for the help!
  
  GO GIANTS in Superbowl XLVI in Indy!
  
  -gary

  Hello

  When a DBA changes the password of another user (using the alter user privilege), the old password
  is spent with the NULL value to the function of audit, only the owner user (aka even) will be required to use the
  REPLACE clause to specify the old password in this case, you can make the necessary checks, all the logic
  Is that if a DBA defines the password it 1. does not know the old password 2. has sufficient mind either
  Specify a password, or 3. immediately expired the password for the user is forced to change.

  Greetings,

  Damage

• Lightroom CC does not allow me to enter the new name of profile for export to ColorChecker

  I have the latest version of the Lightroom CC running on Windows 8.1.  I bought a passport from X - Rite ColorChecker (CH) today and installed the software that came with it.  With the help of my Nikon D7100, I took a gross picture of me holding the CH in my hand and then imported it (.) NEF file) in my LR library (selected the copy option in the import window).  Then, I went to the region to develop for the same imported photo.  Subsequently, I clicked on the file menu-> export-> ColorChecker Passport now to create a new profile.  The LR never gave me a chance to enter a profile name, in other words, it never displays the popup dialog window enter the name of the DNG profile.  However, it has created a new custom profile named 'profile '. I can see it on the camera Calibration tab.  I tried to redo the same process, and he said you want to substitute the present 'profile'.

  How can I get the popup dialog enter the name of the upcoming DNG profile?

  X Rite has not updated the Lightroom Plugin for 2011, and it seems that some users have problems with Windows 8, 8.1 and 10. The link below is what I proposed to a single user. The poster did not, so I don't know if it was ever resolved. It works very well on my system Windows 7 using LR 2015.1.1 is most likely a problem of Windows compatibility.

  Re: File - export with Preset question (Lightroom CC)

  Another thing you can try is to put the program file Passport.exe is running in compatibility mode of Windows 7.  Go to the location of folder below and make a right-click on the Passport.exe of the file, then select Properties. Go to the Compatibility tab and check "run this program in compatibility mode for and select"Windows 7"in the drop-down list box (see below)."

  C:\Users\NAME\AppData\Roaming\Adobe\Lightroom\Modules\XRiteColorCheckerPassport.lrplugin\w in

  

• Motocast - not reliable

  I found that while the concept of Motocast is a good, it is simply not reliable enough to transfer files or stream movies. It never synchronize a movie - still fails, only sometimes broadcast a film - and requires very high use of the processor of the computer running it.

  I have two PCs at home, my main PC (Core2duo based) and a multimedia PC of Atom. My pc of media atom had no chance - motocast could not listen at all - music has also been uneven. I have now on my main PC and routes around 60% cpu when syncing or streaming...

  When it works, it works really well, and I've been with success able to watch an HD movie, but simply too unreliable to be any use.

  Are there alternatives I could try?

  Thank you

  If watch you movies, especially movies HD, those are encoded in real time by the server of MotoCast before streaming to the unit, to save bandwidth and adjust the flow rate and the resolution on the client device. This of course causes high CPU usage.

  A core2duo or Atom may not be sufficient for this task to happen in seconds, so be prepared for some delays here.

  I had the same problem with the Playstation media server. He started to work very well when I bought an i7.

  Streaming music is another pair of shoes. MP3 and other media that can be played directly by the client device are not re-encoded, so no problems with an atom or a Core2duo here.

  Incompatible, as formats for example FLAC are again encoded in real-time to MP3 256kit to save bandwidth. Again, this could cause delays on slow machines of server.

  This isn't the media server part, which would need a little more processing power. An Atom should be good for this.

  It's the media re-encoding in real time is a little more demanding.

• Can I enter both a table and a constant of double precision in the VI form?

  I would like to calculate a new 1 d array using the formula VI. LabVIEW 'smart enough' to enter a 1 d table and a double precision constant in the VI form and leave a 1 d table receives basic commands?

  For example, can I enter [1 2 3] table and the constant [2] and say "table * constant-1" in the VI form and get an output of [1-3-5] or do I have to make a loop for or something?

  The Express VI formula seems that it can have up to 8 inputs.

  Twolfe, the best way to find an answer to this type of question is to try it.

  I didn't know this (because I have no reason to use that express VI), but you can wire a table to it.  He treats like any other LabVIEW operation on arrays.

  But if you were to make a loop, then you should already be avoiding Express VI and start making actual emissions.

  

• Profile of PID Set point

  Hello guys

  im working on the project to control the position of the hydraulic cylinder using labview connected with the NI USB 6251 housing. IM using the sensor LVDT (1V = 20 milimeters) as a measuring device.

  I have a problem when using profile.vi PID setpoint. I need to define the profile of set point (in milimeters) and then divide by 20 (to be converted to voltage) before entering the profile.vi of PID setpoint. I don't know how to divide that cluster of data types (composed of 2 elements (time and setpoint)) with a constant '20', I want only to divide the element of set point, not to divide the time element. Please see my attached VI... Thank you very much for your help guys...

  No I got it myself using bundle features... Thank you guys

• PID Setpoint profile using Minutes instead of seconds

  The standard input for the PID setpoint profile VI is in seconds.  Is there a way to change this so that you can enter a profile in minutes?

  You can multiply your minutes with 60

• How to change the power state in a Service profile template

  I would like to change the "Power status" in a model of Service profile. While I can change almost all other aspects of the model, I don't find it in the UCS Manager GUI. Is it an unchangeable decision while creating the model? I can change it via the CLI?

  Hi Joernclausen,

  What version of the firmware of your UCS?

  In the CLI, try the steps below and let me know if it works.

   Go into the FI CLI and perform the steps below, ensure to enter your own template_name and select appropriate type of template followed by setting the power up or down sj-ucs-r13-mon-A# scope org sj-ucs-r13-mon-A /org # enter service-profile template_name initial-template sj-ucs-r13-mon-A /org/service-profile # power up sj-ucs-r13-mon-A /org/service-profile* # commit-buffer sj-ucs-r13-mon-A /org/service-profile # power down sj-ucs-r13-mon-A /org/service-profile* # commit-buffer

  You may also be able to change the power state of the individual service profiles

   Go to the service profile and use "Change Initial Power State" button for modifying the desired-power value.

  See attached screenshot

• Issue volume ringtone blackBerry Pearl 8130 Smartphones - not loud enough

  What I did:

  Entered in the media / ringtones / choose a ringtone melody / set as ring tone.

  I've also went in the Media options / audio boost on.

  I have the ringtone to play / click on the bb request button to bring up choices: when you are asked to activate the handset volume is so low that I would never hear my phone ring.  When I choose turn on speaker it's the volume that I prefer.  When I leave here and think that when a call comes in it would be again to that volume, it is not - the volume went from how far I could never hear it if the phone was not right in my hand.  Even when I set to Loud - profile (2 vibrate ringing and then ring), it is barely audible.  I know that the phone can be stronger, because I heard it.

  I read a message that you can change the volume by entering the profiles of boards, but when I click on profile my only option is to choose a (Loud, vibrate, quiet, normal, phone only, off) - I don't have the option after pressing the button bb to open other choices.

  I have all over my bb pearl sought other places to find where I could do the volume stick in higher volume, but nothing helped.  Help!

  Found my answer - ended up going to the store of Bell Mobility and the seller helped me with it.  Thank you!

• Profile lock how to unlock my password for administration

  I have two profiles, were all two protected by Word. But just to enter the profile admin password is not open. When I install the software, and the password of modem installation is necessary, why?

  How will I know that my Windows is a Windows license?

  Hi SubhaBera,

  Thanks for posting your query on the Microsoft Community.
  I understand that you are unable to connect to your administrator account, even if you type the correct password. I suggest you to follow the steps below and check if it helps.

  1. What happens when you try to connect to the profile of the admin? You receive an error message/code?
  2. How many accounts do you have?
  3. I suggest you to check the account settings in the user profile to ensure that you use the same account or multiple accounts.

  Computer passwords are used to identify and distinguish users and their access or functionality on a computer or a computer network. Passwords can also help to limit and prevent users from access to confidential data or to access programs, they should not have access to.

   

  If you have problems with the admin account, I suggest you to open a session to build in admin account using the password and check if the problem persists.

  Method 1:

  If you use your Microsoft Account you can reset your password using the link; below

  By using the link below, you can reset the password.

  https://account.live.com/password/reset

  Method 2:

  If you use a Microsoft account, you will need to enter your email password to log into your account. If you have a local account, you can remove the password by following these steps:

  (a) press the Windows key + C, select settings
  (b) click Change PC settings, select users
  (c) click on change password under sign in options
  (d) when you are prompted, type your current password and leave the password empty.

  See the link below for the windows activation.

  The link below provides information about windows activation.

  http://support.Microsoft.com/kb/2806745

  It will be useful.

  For other post help back, we will be happy to help you.

   

   

   

   

• Live View: Editing text is not reliable

  Often, I find that the text changed in live mode view Dreamweaver (Macintosh) to the original text. This happens not all the time, but it is reliable enough to make it unsuitable for use. Therefore, I'm limited to use Code view to make changes.  I had hoped that this issue would have beed addressed in the latest version of Dreamweaver, but it seems not to be the case.

  Is there something I'm missing?

  Ah, which explains a lot.

  Head using the Foundation (or really any framework) DW turns in Design view, I don't understand why you wouldn't bother trying to work there.

  I don't think you're missing something. DW is still largely the same program, made in the 1990s with many extras bolted on. He can't handle complex frameworks without going crazy in Design view. The editor in Live mode is better than it was when they released everything first, but there is still a lot of work.

  I didn't Live text I put in well to come back, but I do not work on OSX, or the other. Maybe it's a bug under reported here (I can never remember seeing it in the forum before). Is there something that makes it more frequent or any process that you can remember it trigger more than once?

• present and open to a new profile

  Hi, I have installed the multifox addon and I can open the new profile in the tab separated what I want to do, I want to submit a form, and that form should open in the new profile of data sent on the original profile.

  example, I'm on a profile - 1 tab I will fill out a form. and when I submit the form, it will open in new tab on the profile-2, with the information given, I entered the profile-1 is it possible? photo attached.

  Multifox sorry, never used.

  This is the closest I can find support for Multifox. https://github.com/hultmann/Multifox/issues

• Since the update, when I tap ' search ' in the address window she seeks with AOL. I DIDN'T ASK FOR THIS. HATE HATE HATE it. Please tell me how to do stop! That's enough for me to give up firefox.

  previously (and in other browsers such as Chrome) when you use the address window to search instead of the specific search window, no harm comes to you, it goes ahead and search with google (that I put in place) and everything is copacetic. now, suddenly the maddening beast hurt is AOL made its unwelcome reappearance and when I search in the address window (which I do by habit) I get a result of significantly lower and deeply irritating AOL search. Firefox is my browser of choice usually but I tried every setting I could think to destroy this parasitic invasion nothing helps, and if I can't permanently I cease to use firefox to avoid huge vitriol, he draws in the core of my being.

  Back to Google as your favorite search engine, follow these steps.

  • In the address bar, type Subject: config and press ENTER.
  • In the filter at the top, type: keyword. URL
  • Double click top and delete everything in it and replace it with http://www.google.com/search?q=

  The URL to add in "keyword. URL"becomes a link in this message, right-click, and choose"copy link location"to copy to the Windows Clipboard. Then press CTRL + V to paste. You have to type all of this saves.

  To reset your home page, follow these steps.

  • Go to the site you want to set as your home page.
  • Click on the orange button Firefox and go to Options | Options | General
  • Make sure that it says in the first drop 'show my home page'.
  • Click on the button called "use current Pages' to set the home page to the one you have on the screen.

  After completing the steps above, install this add-on to prevent another search engine to change your preferences: https://addons.mozilla.org/en-US/firefox/addon/browserprotect/