How to change the power state in a Service profile template

Similar Questions

• The former "cannot change the power state of virtual machine: the process has exited with an error: end of the error message" thing again (Fedora 8/Server 1.08)

  OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.

  I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8).  Mind you, that's all that's changed.  It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.

  After the new kernel and reboot, I had to rebuild vmmod.  I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d.  Update like a champion.

  Try to turn on a VM and Ihanta!, the above error.

  Nothing else was changed.

  I tried the upgrade to VMware Server 1.08.  Used all-new any117d - update OK.

  Error again.

  I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.

  Error again.

  1. status of /etc/init.d/VMware

  Networking networking on/dev/vmnet0 is running

  Invited only on/dev/vmnet1 network is running

  Network invited only on/dev/vmnet8 is running

  NAT networking on/dev/vmnet8 is running

  Responsible vmmon module

  Loaded module Vmnet

  FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.

  What now?

  I'm in the same boat.  Fedora 8 2.6.26.8 - 57.fc8 #1 SMP

  I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d.   117D compiles with every version of server but when I try to turn on a virtual computer I get this error.

  Cannot change the power state of virtual machine: the process has exited with an error:

  vmxvmdb: name of the Index generated by the configuration file

  POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.

  You have a bad version of the module kernel "vmmon.

  Try reinstalling VMware Server.

  POST (no connection): failed to initialize the surveillance apparatus.

  Failed to initialize the virtual machine.

  End of the error message.

  I found several posts other people have this problem but

  they are months with no recent activity and nothing that solved the problem.  I found appeared

  to get a fix, one updated the all an update that corrects the problem for

  2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead.  Here is the link to the discussion

  http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2

  Of course, I would like to know how to solve this problem as well.

  Thank you

• Cannot change the power state of VM: internal error

  Hello

  I freshly installed OS elementary which is based on Ubuntu.

  VMWare Workstation installation worked fine, but after creating my new virtual machine with a Win 10, the same message comes to me:

  Cannot change the power state of VM: internal error

  I looked a little in the log file, found this dump was set to zero, they changed in etc/security /, but that's all I've managed to find.

  Here is my log file

  Thanks a lot for your help

  PS: I'm leaving a beginner in the Linux world, so explanation would be welcome

  Hello

  Welcome to the VMware community forums.

  I don't think that the problem is related to a beginner linux user, it's a problem triggered by a specific hardware configuration.

  If you look at your log file again, there is an error just before the vmware process attempts to core dump. The dump is a reaction to the problem.

  vmx| E105: PANIC: VERIFY bora/vmcore/vmx/main/timeTracker_user.c:238 bugNr=148722
  

  If you then put the bug number into google, you get:

  http://KB.VMware.com/kb/1227

  Which indicates in return you can set a configuration file to specify the actual frequency of your processor.

  Your processor is an Intel (r) Core i5-3570 CPU @ 3.40 GHz

  The linux variant of the config.ini file they speak on windows hosts is/etc/vmware/config

  --

  Wil

• Moved from VM with Snap Shots, doesn't start: cannot change the power state of VM: internal error

  Hello

  Last week, I decided to move from a Windows host based Linux system. So I went through my VMs their power off and copied to another drive. I then installed 7 Centos and reinstalled VMWare Workstation 12 re-imported the virtual machine in VMWare and I tried to start.

  I received the following message...

  "Cannot change the power state of VM: internal error.

  Suspicious, I looked at the folder that contains the machine virtual and noticed it contained snapshots. DOH!

  I guess it is pretty bad, not sure where to start?

  Any help would be appreciated.

  Thank you

  James

  I copied VM, with and without clichés, without problems. Have a few running on OSX Fusion so

  The first thing I would check would be for folders and .lck files. If so, remove them.

  Lou

• Cannot change the power state of VM: cannot...   (VMWare Workstation 7 on Debian Lenny)

  Hi all, I am new to this community. I recently installed VMWare Workstation 7 on a Debian Lenny (kernel 2.6.26.2 - amd64). I had no problem with it, but when I tried to start a Virtual Machine Windows Vista, which I created it, does not start. Error says windows "cannot change the power state of VM: could not find a peer valid to connect to". "" Any idea, please?

  Josber.

  It seems that the virtual machine has been suspended when your host is using a different screen resolution

  either change back to the resolution that you used when you suspenmded the machine virtual or delete the VMS.

  This will force the VM to do a cold boot

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Satellite C - How to change the power settings for the WLAN?

  How can I change how not having the power cable plugged affects the performance of my wireless network?

  Basically, my wireless works well when the power cable is connected to my laptop, but when it is disconnected from switching between web pages takes a lot of time and the signal is lost and must be restored each time between each Web page. Is that what I can do about it?

  Hey,.

  You can find the WLAN Card settings in Windows to energy saving power management:

  How to manage Windows power management features:
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

• How to change the normal state inside the Accordion widget.

  Once I drag the widget, I see the base. Then, I can easily change the active state of each button.

  By clicking on 'Normal' and try to change the State normal it always changes back to 'Active' in appearance.

  Read the manual does ' t solve my problem. What thing?

  Thanks in advance

  Uwe

  I got it. Once I'm in the normal state and I want to change, click on 'Text' in the upper right of the Panel tools on top.

  Thanks anyway.

  Uwe

• How to change the size of virtual machine from a template installation disc.

  Dear team

  How to change the size of the disk when installing VM from a template? I'm on ESX 4.0 Vcenter 4.0

  Concerning

  Shamal

  I don't know if this is possible, you may need to deploy the machine first, then use the VMware Converter or vDisk settings in the properties of the virtual machine.

  The converter is in charge on the partition, as well as (for Windows clients).

  AWo

  VCP / VMware vEXPERT 2009

• How to change the power supply to the CD/DVD drive so that it is disabled by default?

  When running on battery I often use the icon 'Remove hardware safely' XP to 'unplug' the carpet * CD/DVD drive for Safe some battery life. (Does?) I use Fn + Tab to bring back to life. I wonder if there is a way to make my boot Notebook (M400) with the power supply to the reader off by default. Moreover, any idea where I can find the extra battery for the slot of the CD/DVD player and who the price?

  Thanks in advance for your help.

  Hello, Robert

  If you see the start page, you will see that this support forum is not a type of support Toshiba directly but forum users. But you're not alone and many users expect that a Toshiba support team sit in the office and before writing the answers.

  In any case, there are many users of Toshiba laptops with very good knowledge and also amateurs who are trying to help the other guys in different problems and also to share own experience.

  Professionalism is not the forum but action when you need help because of physical damage or something similar. If you need assistance and competent answers each authorized partner must be able to provide the info you need. But please don t mixture and Toshiba service partner because it is not the same.

  In any case, I found the info you can use additional (second battery expansion) and it takes batteries with PA3510U-1BAL, PA3510U-1BRL room numbers. I can't tell you how much it costs, but you will find only using Google.

  Back to your first question: if I understand you just want to save more power and because of this, you want to sign out ODD. It's a nice idea, but you have clearly misunderstood something. "Safely Remove Hardware option is there to help the operating system and and say this material, a part will be removed and don t exist anymore, but it does not physically the disconnection of any other material."

  If you need more power use a second battery and enjoy your life.

  If you have any other questions you are welcome. A lot of users here M400 and I hope in the future that some of them will participate in a little more.

  Good day! :)

• How to change the power mode in Windows 7

  Hello

  I'm not very good in English (I'm Dutch) only when I talk about games or something not to technical stuff, but I'll try to explain

  In recent weeks, I have windows 7 running on this laptop.
  First I had vista, but who was bad. Windows 7 works much better.

  In any case, I don't have day my laptop with drivers from this site.
  When I was running I was missing something.

  On the right side where you can chance your schedule 'energy', you can choose between low and balanced performance.
  On vista, I had as good, but not now.

  Y at - it an update where I can lucky who?
  If Yes please can someone tell me where to find this update.

  Greetings,

  me

  took me 10 minutes to post this because of your message contains profanity or inappropriate language.
  In the interest of your fellow forum users, we ask you to change your message.

  Hello

  Windows 7 is a bit different as the Vista operating system.
  But you can change the settings in the Power Options located in the control panel.

  Go to the Control Panel-> Power Options

  There you can find both of these options; Low performance and balanced performance.
  The high performance is hidden you will need to click the arrow to open the option where the mode performance.

  But you can also create a mode of clean energy;

  On the left you will find the option: create the mode of power (or something like that... Sorry it s just translated)
  That could be an option that lets you choose the high performance.

• How to change the initial state of the button text?

  blank_page

  The initial state of a button switches is one established in IUR editor before the program runs in the Panel of property whose screenshot you have set. I'm not aware of a way to programmatically change the IUR, especially if the target computer is not installed on the development system.

  If for some reason you won't change the default value in the editor of the UIR, then what you have to do is to define the corresponding attribute BEFORE the Panel opens and possibly call DefaultCtrl before you set the value by default so that the control is set programmatically by default, you have just put , depending on what it is.

• How to change the power of battery of 2 hours to 5 hours

  where can I change the duration of battery life of 2 hours to 5 hours

  You can not.  This estimate is provided by Windows and your computer.  The only way to increase this is to buy a larger battery capacity.

• How to change the power settings to activate the fan stops during the day before.

  Since my computer has turned off the fan in the standby mode.  Suddenly, after having entered the day before, the fan continues to run.

  Where can I set the power standby mode, so that the fan stops?

  You mention not likely this fan, case fan? That would be controlled by the drivers from your mobo, obtained from your mobo site

• How to recover the PSADMIN State of origin user profile?

  People,
  
  Hello. My user ID to log in the application designer is "PSADMIN". I just created PIA. "http://localhost/psp/ps/?cmd=login" accesses PeopleSoft access code page, and I use "PSADMIN" to connect. I can open all web pages after login. "PSADMIN" is the access profile and user profile.
  
  But after I create a "newUser" role and assign a list of the permissions for the role, then the role "newUser" a link to the user "PSADMIN" profile, I can't open most web pages after login in PeopleSoft signon page using "PSADMIN". The system get the message: "you do not have access to the collection of Navigation. Please contact your portal administrator.
  
  Can any people tell me how to recover the profile user "PSADMIN" State of origin so that all web pages open after the connection?
  
  
  Thank you.

  go to PIA by using a root as VP1 or PS user and remove what you added to the PSADMIN.

  If you have locked your root user by chance... unlocked by using backend.

  PSOPRDEFN TABLE, unlock root user using the acctlock update.

  then sign in using that and make changes to the PSADMIN. or just the background, you can delete the additional role of PSADMIN profile using the same table.

• How to set the power settings - Satellite Pro A10 with Win XP Pro

  I an A10 Pro of the Satellite with Win XP Pro installed and cannot access the power settings. When I go into the power settings in Windows, I get a msg telling me to use Toshiba Power Saver and Win power settings are grayed out.
  I installed pwrsav-spa10-xp-60007-.zip which tells me that it is installing the Toshiba Power Saver, but always Win power settings are greyed out and I can't find no separate application "Toshiba Power Saver".
  The BIOS shows ' version of BIOS ACPI = 1.30.
  Can someone advice how to change the power settings please?
  Thnx.

  Dave

  Hi Dave,.

  You have the "Toshiba common Modules" installed? They must first of all for many models of Toshiba, and power settings module is an add-on for that.

  If you do not have the appropriate restoration or the utility CD handy, the drivers can be downloaded from the Web from Toshiba website.

  I hope this helps, let us know how you go

  Weezle