A big bug

Similar Questions

• Big Bug mith my doc of Muse

  Hello

  I have a big problem with Muse. Yesterday, I was working on my web site and I decided to adapt it to a version of the phone.  So I make a copy of a large rectangle (not a link, an image but simply a rectangle with muse) from the House of the desktop version and I stick to the House a mobile version. From this point on, all bugs and my document is unusable. I'm very afraid because this is my only document on this website and I spend a lot of time on it.

  The message that appears when I try to open my doc is the following:

  This document contains 4 active links being oversampled. You should resize smaller or right mouse click on the assets in the active panel to display more options.

  When I try to open the phone version, to clear the large rectangle, to the origin of the bug, the message that appears is the following:

  Adobe Muse CC has encountered an error and will now close. Please report the last shares little you take leading up to this error to the CC adobe muse team.

  Failed to instantiate. U8291 UID in list owned by layer (UID: U7328)

  Sorry for my bad English, I'm french ;-) I need your help please.

  ELSA Kbaier

  Hi Elsa

  Could you please share your with us .muse file to study? Please send it to [email protected]. If your file is larger than 20 MB, you can use something like Adobe SendNow SendThisFile or Dropbox. Don't forget to mention the link to this forum thread in your email so that we can identify the file.

• Trackpad unresponsive - big bug

  Hello world

  Me and my GF had this problem surprisingly at the same time on two Macbook Pro 15 "(mi-2010 et mi 2012) 400 km far (so no sort of influence each other)"

  After the upgrade of El Capitan for the 10.11.5 release the trackpad becomes unresponsive/crazy and the cursor starts jumping around.

  We have tried to remove dust (although I've excluded because of maintenance I have for the Mac), clean the surface, reset the NVRAM, reset the SMC by removing the battery.

  No bumps have been detected on the batteries. We tried to hard cock down to the contrary simply stop the mac. No improvement.

  We were afraid of the virus and I have confidence I formatted my drive around and quickly installed new El Capitan. Still no improvement here.

  We always have this problem in safe mode.

  It seems pretty clear to me that this is a problem with the upgrade. Either the new firmware of the trackpad is bug, watch here is really annoying a planned obsolescence

  Do you have an idea of what kind of other tests I could try? Apple is aware of this problem? Thank you!

  MacBook Pro mid-2010

  2.66 GHz/8 GB RAM / 256 Apple SSD / GeForce GT 330 M / 1680 x 1050 px / 802.11 a/b/g / Bluetooth 2.1 / OSX 10.11.5

  MacBook Pro mid 2012

  2.3 GHz/16 GB RAM / 256 OCZ SSD / GeForce GT 650 M / 1440 x 900 px / 802.11 a/b/g/n / Bluetooth 4.0 THE / OSX 10.11.5

  looking for possible solutions here:

  https://support.Apple.com/en-us/HT203171

  Ciao.

• Big bug in first Pro CC 2015.3 when the pad by dragging '?

  I just installed first Pro CC 2015.3 and found this horrible bug.

  Well, I hope that this is a bug, because if this is a feature it has no sense at all.

  Please look at this GIF: https://i.gyazo.com/7ad73bd031cd9739f759ab15f8c922b4.mp4

  I have 2 clips:

  1. CLIP 1 on track 1
  2. CLIP 2 on track 2

  Now, I put the cursor on the edge of the clip 1 and start it cut by dragging.

  If you look at the program monitor, as long as I move the mouse I roll the video. And I see roll video CLIP 1, OBVIOUSLY, because I'm clip cut 1.

  Now look at the madness. As soon as I passed under clipping 2, the program followed the evolution and show me the clip 2. It's something that never happened in Premiere Pro CC 2015 and arrives for the first time in first Pro CC 2015.3.

  NOW, ADOBE

  • If I'm mower CLIP 1, why the hell I see the content of the CLIP 2?
  • How can I solve this problem?

  
  Please note that I can not work at all with this bug...

  Disable

  

• BIG bug of serpentine in Illustrator CC 2015

  Hi all

  I am currently on a pretty big project of isometric drawing, but there's a pretty huge problem coming with it:

  I've given an isometric grid with guides, but whenever I try to start a from line of her 'intersect' two guides picture comesback with:

  'Illustrator that the operation cannot complete due to an unknown error [%s]'

  For me, it's a pretty big problem and can be easily reproduced in many scenarios:

  (1) make a print/A4 document.

  (2) attract both a horizontal and a vertical guide (works with features too), no matter where they intersect

  (4) select both then go to the object/transformation/rotation and enter any value then confirm

  (5) now try to trace a line from their point "intersect" with the help of the view/guides

  (6) have this beautiful message pop up

  
  

  Basically, each point of intersect with rotated shapes (via the object menu) or traits can be the starting point of a new trait.

  
  

  It is preventing me from working on this project and makes me lose money upward.

  
  

  I'm on El Capitan with the latest update to Illustrator CC 2015

  
  

  I hope that you have a problem, have a nice day!
  

  Hi leod86781877,

  Thanks for the thread. I am able to reproduce this problem on my side and convey this to the team of engineers who will look at this issue.

  Kind regards

  Rambour Singh,

  Illustrator team

• There is a big bug in 1.01 (ios)

  When you open a picture in picture system, you'll find that there are more pixels the image below. This bug is really important, and I found there is no report it. I wish that you will fix it in the next version!

  You are the developer. I just want the developer to know this problem and also want to know how to contact them.

• File transfer a BIG bug! Amazing transfer slow and full bandwidth used!

  I read about this since 2014! How Skype does not solve this problem yet? Amazing!
  I am transferring files between 2 PCs on Win7 64 bit and latest Skype (update), full bandwidth of 1.5 Mbps downloading (and I am sure is that Skype to use 100%!) and one day calculated for the transfer of 250 MB! It goes like a turtle! What the hell Skype is the download otherwise files?
  
  Horrible, please fix!
  Thank you

  Transfer of cloud of image files is not yet implemented on Office of Skype for Windows. File transfer is always P2P.

• BIG BUG: Pre stuck on mode headphones! Help

  I was listening to music on my pre and had plugged my earplugs I call then I unplugged them and now I can only make calls using the speakerphone or bluetooth headset and the internal speaker stopped working. During a call, if I look at the icons at the bottom of the screen of dial pad, left down to switch to speaker mode icon is now an icon of headphones, and if I press it, it goes into speakerphone mode. I can't go back to the normal mode. I restarted my phone several times, tried everything I could, it has been 2 days and still can not make a normal call.

  Please help, and no, I don't want to reformat my phone

  Sometimes the switch inside the headphone jack can get stuck

  Try to take your helmet and inserting and removing the decision-making of several times and see if the audio returns.

• Massive distortion of the Image - big Bug

  What should I do?

  First of all these lines (1st photo below) appeard on the photo. I have nothing to create these lines. They errased everything for background concentration.

  There is no way to recover it. Which goes back all the way into history at the beginning. The original image now has these lines on it.

  I have worked with Photoshop since Photoshop 2, so I don't know that I did this.

  At first I thought it was a problem of time. Then he distroyed each photo, I opened that has layers. (2nd photo below). I put 20 hours of work in the larger version of the photo below and now only the very original is not totally trashed. He arrived with other photos, I opened and I don't want to use PS anymore until this issue so fixed.

  First image distortion

  

  Now it looks like this with all the layers is enabled

  -Yes the whole program distroyed and cut layers at random through the other layers.

  There is no way to recover it in the history.

  

  My god.  I have never seen anything like this before.  First thing I would do is to reset the Photoshop preferences, but I wonder if it goes further than Photoshop, as a small problem with a mouse or tablet that is originally from random cursor movement or other operations.

  When you open a file image, the speed at which that happen and is happening when you look at the screen?

  What operating system?  What version of Photoshop?  I assume that you back up anything that could be damaged?  It would be nice to hear that you have a good backup plan, but that does not solve your problem.

• Update Flash windows pro + recent = BIG BUG of FONTS!

  Hello

  I just wanted to share my recent pain in you know where. Last week around Wednesday IDE Flash (cs 5.5) ceased to display most of the custom fonts. I could create a field of text (referring to the classic text box) and put a text, however if I chose:

  -police custom (for example, Futura, Helvetica...)

  n ' any method of anti-aliasing (readbility, animation, custom)

  then, the police were not visible at all in the Flash IDE and even in the published SWF.

  So after a day of reinstalling software and system (Windows 7 pro x 64) I found that the problem is caused by the recent Windows Update. Since I installed the system clean and disabled automatic update system all fine wokrs. This happens to my colleague too well with flash cs5 and Windows 7 pro x 64.

  So to all the people out there - flash I just wanted to ask if you had the same problem, so we know if it's just individual problem or the common thing. Because now I can't recommend is not to download recent windows update until this problem is resolved (if there is).

  For the adobe guys - do you have a report on this?

  Check the many messages (and solutions) on this issue:

  uninstall this update: http://support.microsoft.com/kb/2753842

• Big bug in Acrobat 9.4.1

  In Acrobat Professional 9.4.1., it is a new default behavior that causes regular annoying pop up boxes that indicate that "document is in preparation. This long and adds no value.

  To disable this aberrant behavior, eliminate Accessibility.api < installation root > \Adobe\Acrobat 9.0\Acrobat\plug_ins. The problem is that once this file is deleted, Edit-Preferences and the properties toolbar violent.

  Does anyone know how to disable the behavior annoying without breaking Acrobat? If not, is there someone in Acrobat, listening that could unbreak the product?

  Try changing the following preferences:

  Edit > Preferences > reading

  • Reading order: "use of reading in raw print stream.

  • Vs page Document: "only read the currently visible pages".

• confirmed a subelement bug in 2015.1

  First, watch this short video showing the issue, I did.

  Infuriating bug of first pro 2015.1 - YouTube

  How to recreate this bug-

  1. import a video clip.  Format is not serious.

  2. some subitems video imported.

  3 when subitems, uncheck the 'restrict the toppings for subclip limits. "

  grid mode, the poster frames a subitem must unfortunately be square black.  mousing over them will make the system displays a poster frame and hover work of scrub.  However, by clicking on a different subcomponent, or even do some work in the Panel Assembly causes the poster frame back to black.

  big bug.  the application makes it unusable if you have a project with a ton of subitems.

  I would say that sub-elements are detailed in this release.  the key to this bug and its annoying workaround is in the box 'restrict the toppings for the subclip of the limits.  Unchecking it causing the problem, it makes thumbnails behave in the tray as it should.

  Unfortunately, this means I have to manually, right-click on each subelement and choose ""MIC for subclip limits to restrict "if I want to see all thumbnails." 

  You can read more about this bug on facebook 'Moving to Premiere Pro' group here - https://www.facebook.com/groups/premierepro/?fref=nf

  my gear - windows 10-32 GB of ram, 6 core haswell-e, with Titan X GPU. The previous version of first doesn't have this bug.

  also, someone on the facebook thread confirmed this bug on the mac with 2015.1, both in windows 7, so it is most certainly cross-platform.

  In the context menu, uncheck vignettes show the applied effects.

• SplashScreen distortion bug still existing in the last AIR16beta

  Given that this bug exists on air16 as everyone knows,I just downloaded the latest beta of AIR 16 of Download Adobe AIR 16 Beta - Adobe Labs , I thought that this bug should be corrected as I said:, and it's looks like I run the app in landscape left, but if I throw app right-landscape mode, the start screen always get distorted and 90 ° clockwise rotation...

  Should I publish my ASAP apps on appstore, it is certainly a big bug blocking for me, please someone from ADOBE can help?

  Hello

  I just found a way to solve this problem...

  It's really really make me crazy... I spent an entire week on this subject!

  In the Flash Builder project property adjustment Panel, choose Actionscript - Panel under package build - Apple iOS - Native extensions, there is a path entry filed setting Apple iOS SDK

  If I put it /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPh oneOS.sdk everythign works fine

  But if I put it in /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPho neOS8.1.sdk, this bug appears again! Even if only an in-app purchase feature in this DONKEY.

  I think it's because Adobe guys do not have test ANE compilation with ADT on ios8.1 SDK still...

  

• Another bug in Lightroom 3

  Occasionally, I insert a card that allows to import and to convey the message that LR can not import, because the card is unreadable. I try to read the images of the bridge, and they are there, all images can be opened without any drama. Images can also be read and downloaded if I use the Finder (Mac OS X), or any other software besides. Used to happen at least once a week on LR3, but never on previous versions.

  I thought that this bug has been fixed in LR3.2, but today it just happened again. Very annoying and frustrating. Finally, after several attempts, Lr will move and import photos from the card.

  Also worried because Lr3 has been corrupt images for me during the conversion to DNG.

  Master headhunter wrote:

  Therefore, claims Adobe LR3.2 has a software bug? I'm sorry. I don't think so. I have

  find assistance from people on the forum is a much better resource

  then most of the Adobe 'Tech' on many issues.

  I didn't know that LR3.2 is in the public domain and that guys on the forum can correct?

  Serious, LR3.2 is a BIG BUG. I want to say I need to work with this tool instead I'm looking

  through the forum to see there are patches to help me be productive. I do not remember

  to see tons of questions of any other software before then what I see here.

• is this a feature or a BUG? video inside.

  I test illustrator CS5 and I found a video whith something I would call a big BUG. but take a look.

  http://www.YouTube.com/watch?v=gcREyhfeoGU

  I've been to reproduce the same feature/bug on my trial version of illustrator CS5.

  any suggestions?

  kux73

  > Why illustrator Exchange shape paths, when you give them a transversal? It makes no sense at all.

  By turning on "Snap to Pixel Grid", you are saying that Illustrator - no matter where I draw a path or what race width I chose, please try to make it fall on whole pixels.

  Now, consider this example:

  Draw a rectangle as in this example (the Black Watch the grid of pixels and the blue box is the path of the rectangle).

  

  Now define a white line with a width of 2 pixels - everything seems very well because the race falls on whole pixels.

  

  But what happens if the width of the line: 1 pixel? Not very good, now the race falls on half pixels and gets a little blurred out by anti-aliasing.

  

  If you set snap to grid of pixels for this rectangle, Illustrator will 'fix' the problem by the way of the path. In this example, the path now falls on a pixel, so that the race will be on a whole pixel.

  

  Now you can see what line up on the grid of pixels. So imagine if the original rectangle had only the top of the path on the edge of pixel, but the background was a pixel (or some other fraction). Here the 1 pixel wide line appears on the bottom of the rectangle, but not the sides or the top.

  

  Line them up on pixel grid can still clean it up, but the size of the rectangle will be changed by half a pixel in height.

  

  So now you can see the power of this feature - it can save hours and hours of cleanup in Photoshop for web graphics. You can also see that the abuse of this feature can create results like what is shown in the Youtube video misleading.