A BLUE screen came stating "check to make sure that a new hardware or software is installed properly...".
Original title: igdpmd64
When using my computer (laptop). Version of Window 7 6.1.7601 Service Pack Build 7601
A BLUE screen came stating "check to make sure that a new hardware or software is installed properly...".
Disable the BIOS memory options such as implementing caching or shading... If need to use mode without failure to delete or diasble components, restart the computer, press F8 to select Advanced Startup options and then select Safe Mode.
Technical information:
Stop: 0 x 00000050(0xFFFFF88168082EA0, 0x0000000000000000, 0xFFFFF880067A5878,0x0000000000000005)
base address igdpmd64.sys FFFFF880067A5878 at FFFFF8800664B000, DateStamp 4d41a3e1
What should I do? Right now I'm in Mode safe mode with networking
Finally, starcraft 2 is installed. Thank you!
Tags: Windows
Similar Questions
-
I get a popup that says that no sound device imput is to make sure that your audio hardware works and check your audio configuration in the audio device and sound control panel themes
Hello
1. what operating system is installed on the computer?
2. when exactly you receive this pop up?
3. able to play sounds using Windows Media Player?
Please provide more information on the issue so that we can better help you.
In the meantime, try the troubleshooting provided in the link below steps to solve the problem.
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
-
I have a PC with Lightroom 6 just installed. At the opening, it says Lightroom - opening catalog: catalog Lightroom - 2.Ircat, then a Popup comes up saying Failed Assertion and the program closes. I checked to make sure that the photos folder is under the directory of the user and the registry redirects to the right/directory of the user file. The catalogues are stored in a subdirectory of Lightroom in the photos subdirectory. You need to resolve without losing all the catalogs.
Could you please try to uninstall and reinstall Lightroom once on the computer
-
How can I make sure that any firewalls (versions of software or hardware) does not block port 443 to access?
Hi Anna_753,
Usually, you would receive messages from any program if it is impossible to access the port.
If you want to check if the port is accessible, then you will need to check the firewall settings.
Each firewall has its own parameters for ports of the computer.
-
I looked more similar to this proceeding issues and they are just too complex to be right.
Chrome displays this simple code:
<body > <h1>Simple Hover</h1> <img id="home" name="img_home" src="hover/home_default.png" alt="Home" onmouseover="window.document.img_home.src = 'home_over.png'" onmouseout="window.document.img_home.src='home_default.png'" /> </body>
Firefox doesn't. Verified javascript is enabled and it is.
This is for a class of autonomous rhythm is not emergency... but... assuming it was my code I deleted all my courses involving the hover and restarted, only to find the error continues and THEN I tried Chrome, LOL.
I'm on version 38.0.5 on Windows 7. In simple terms, how to fix this?
Thank you
Mike
Edit: tried to fix style - that didn't work. for the code example, see https://pastebin.mozilla.org/8838794 (philipp)
I don't think you can use window.document.img_home.src to set the attribute of the source of an image.
In Firefox, you will need to use document.getElementById, or one of the other functions possible getElement (s).- https://developer.Mozilla.org/Web/API/document/getElementById
- https://developer.Mozilla.org/Web/API/document/GetElementsByName
- https://developer.Mozilla.org/Web/API/document/querySelector
As you are referring to the element current, easier is to use this "selector.
<img id="home" name="img_home" src="hover/home_default.png" alt="Home" onmouseover="this.src = 'home_over.png'" onmouseout="this.src='home_default.png'" />
-
I have an emachines W3644... it came originally with windows xp family, but I currently have windows xp pro installed. It worked great for 4 months, no problems or anything. I got it sitting speakers... speakers were not connected or hung. I don't know if this could hit anything or not? My computer has 1.37 GB of RAM and the graphics card is a NVIDIA GeForce 6100 nForce 405.
Questions are... Well, he keeps just randomly bluescreening. There isn't really a reason as that why, I'm the only person using this desktop computer, and I really did something to do that. I have scanned with many different scanners, and they found simple things like false positives and tracking cookies, none of which is a big deal.
I tried many things to fix this myself... but nothing has worked. I'm starting to wonder if it's something to do with the material?
I tried many things... include system restore, using the last known settings who worked, and also something to do with the domain controllers, or whatever.
No one has solved the problem. He continues to randomly bluescreen. Also, a few times I clicked on records and he told me that they were corrupt, and when I right click on them and click Properties, it says that this folder contains 0 bytes of data... when there is more than 1 GB of stuff in there. This is the folder where I put my icons of computer maintenance and other things in.
Then I'll reboot it'll randomly blue screen while windows is loading, he'll also do to the logon screen and sometimes even after connection... sometimes I it will load everything very well and it'll be on the desktop and I will leave the room and return, and it will be on the blue screen.
I'm not sure what to do at this point. I reinstalled windows... and he still bluescreens. I copied most of the error codes he gave me... If someone could tell me please what they mean, or be of any help that would be great. I tried a lot of things... even reinstall... and he still continues to bluescreen. I also unplugged then replugged... all that does not work either. I also tried in safe mode, even in safe mode it bluescreens, sometimes even during loading safe mode.
Anyway... Let me just enumerate all the error messages I've written... Please look at and if you know what NONE of them speaks, please let me know. I just want to know what his question is... so I can hopefully do this fix, or at least get another or something.
Here are the error codes I wrote last week.
STOP: 0X0000008E (0XC0000005, 0 X 00000322, AA4D7C68, 0X00000000)
It mentions something about my bios if I remember correctly...
STOP: 0X0000008E (0 x 0000005, 0XC0000005, 0XBF8A58CB, 0XA84EE96C, 0x00000000) win32k.sys-address BF8A58CB base at BF800000, DateStamp 4a8564c7
STOP: 0X0000008E (0 X 80000004, 0X8165CE81, 0XAF311B38, 0X00000000)
STOP: 0X0000008E (0XC0000005, 0X805656DE, 0XB7AC9770, 0X00000000)
BAD_POOL_Header STOP: 0 x 00000019 (0x00000020, 0XE210A998, 0XE210AA38, 0X0C14020D)
DRIVER_IRQL_NOT_LESS_OR_EQUAL STOP: 0X000000D1 (0X0001000C, 0 x 0, 00000002 00000000, 0X8A2D2700) wmaud.sys - address 8A2D2700 base at 8A2D2000, DateStamp 48025c3e
STOP 0X0000008E (0XC0000005, 0X80564BB5, 0XA90F0C80, 0X00000000)
PAGE_FAULT_IN_NONPAGED_AREA STOP: 0 X 00000050 (0 X 80898298, 0X00000000, 0X00000001, 0X8054BBB4)
The BIOS in this system is not fully compliant ACPI STOP: 0X000000A5 (0 x 00000011, 0 X 00000007, 0XF771F180, 0 X 03000000)
PAGE_FAULT_IN_NONPAGED_AREA STOP: 0 X 00000050 (0XBC99E00C, 0X00000002, 0X00000001, 0XAC9A203C)
STOP: 0X0000007E (0XC0000005, 0 X 00002300, 0XB85E29F4, 0XB85E26F0)
STOP: 0X0000008E (0XC0000005, 0X805454F3, 0XB9359B5C, 0X00000000)
It's all the ones I copied. I tried to reinstall and still get errors. Please, someone tell me what these codes mean as soon as POSSIBLE.
Thank you.
If the RAM is only four months and you have identified that it is at the origin of the problems (e.g. the BSOD happen when only a single module of RAM is in) and then even after four months it can always happen. Things such as ESD (Electro Static Discharge) or plug the RAM while it is still on the motherboard can cause these problems to happen... but they may or may not happen immediately. The RAM could be faulty from the beginning, but has only gotten worse. But unfortunately there is nothing that can make it work, if it is faulty, then it has to go back for a refund/replacement - as boring (and believe me, I know) that it is.
0X000000BE normally concerns pilots in regards to the 0 x 00000050 - this normally either bad RAM, video memory, and bad devices (although not very likely) or bad memory Cache L2 (did not have a lot of people), but it can also be bad device driver software.
I wish that the BSOD errors are actually more accurate as to describe what is at the root of the problem but they are not, and most of the time, it is by a process of elimination that we can solve the problems. However, I would say that if your original RAM works in the machine and you get only BSOD when the new RAM is in, then the new RAM is the culprit.
Here's a little info on the RAM and it does: http://www.technologybasics.co.uk/WhatIsRAMAndWhatDoesItDo.html
I hope I covered everything, but other questions, do not hesitate to ask :)
--> I hope this helps! Please mark it as correct answer or vote if it does :)<>
http://www.pcuk.biz - my Web site | http://www.systems-and-solutions.co.uk - where I work
Info from Microsoft about phishing . Information from Microsoft on the fake security software -
I can't get the automatic updates on my samsung jack sgh-i616.
"Connection to the update server is not available. "Check your data connection settings and make sure that the device date and time are correct.
RESULT CODE: 80072ee7
-It is a windows mobile 6.1
Thank you very much! = DAs a guide.
This error code translates ERROR_INTERNET_CANNOT_CONNECT.
You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
I just purchased Fable III PC Retail today and I installed and you get the following message:
Games for Windows - LIVE should check the release date of your game. Please make sure that your computer is connected to the internet.
No personal information will be sent to Microsoft. A LIVE ID is not necessary.
As you can see I have an internet connection because I am writing this post. There is no button to push or anything to continue the activation process.
The game was released in 2011 and 2012 is beyond the release date.
What is the problem here?
Using Windows 7 Ultimate Service Pack 1
I7 2670qm processor
16 GB of Ram
NVIDIA Geforce GTX 560M / 3GB
I found the answer myself. There is a bug in the commercial version of this game. In the pop up menu it is supposed to be a button that says "enter", but it does not appear then press just enter on the keyboard and all is well.
-
Original title: Error 0 x 00000709...
Error 0 x 00000709... I get this message because I bought a new laptop printer a canon IP100. My computer won't let me not choose as a default printer at all and it comes up with this message:
«operation cannot complete error 0 x 00000709.» Double check the name of the printer and make and make sure that the printer is connected to the network. »
I had trouble terrible., the only way I was able to use it is to remove the other printer but then again used I would have like a detauls.
Can someone tell me how to fix this error, I would apreciate any help I could get with that. I have two printers in the same time, one for the front desk and the other mobile. I'm sure that someone out there knows what to do? Thank you
Hello
Please follow the suggestions posted on April 16, 2013 by me from the link below.
Please back up the registry before making changes.
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
Hope that the information provided is useful. Do not respond if you need more help.
-
Original title: Bulletstorm on W7
Hi, I installed Bulletstorm for my grandson on w7, on the start-up of the prog. It comes up with a "we need to check the release date of your game, make sure that you are connected to the internet" on pressing enter, he says: I am not connected to the net and unable to connect to live, even if that window is open!
XM
Given that Bulletstorm is not a product of MS, I suggest you cont EA (the developer) for assistance
http://www.EA.com/Bulletstorm
-
Microsoft account
Please check your email address
To complete the setting of the Microsoft account, we just need to make sure that this email address is yours.
If you did not make this request, click here to cancel.
Thank you
The team Microsoft account
I do not have a Microsoft Email account! My wife did and when I click on the button check it evokes its address!
I just bought a new Dell with Windows 8 and recorded with my separate email address and they send it to my e-mail address for confirmation and it evokes e-mail address of my wife in the cross reference by address or telephone numbers.
It is very painful and would like to know what are my options to return to Windows 7
Hi Patricia,
Please follow the instructions below:
How to check an e-mail address in your Microsoft account
When you use a different e-mail to your Microsoft account, you get a link in an e-mail. Follow the link in that email to verify the address e-mail. If you need a new verification email:- Connect to the Manage aliases for your account page.
- Click on validate next to your email address and then click on email.
If you want to go for verification by phone, you must type the code that appears on the verification page. As soon as you type the phone number and click on "send code", the next page will ask you this code.
Hope this information was useful.
-
The people there, I am fairly new to create forms but starting to get the hang of it.I'm trying to make sure that when people sign my form fields that I put as 'compulsory' are comeplted. Currently my form does not :-(
I have a "submit" button at the bottom of the form that I set up to E-mail the form validated at a defined person, however, I want to make sure when you press this button, there is a check to ensure that the form has been signed and that the 'required' fields have been comeplted.
Ideas are very welcome!
Thank you
Chris.
Apologies! Thank you very much for your help! The code you posted earlier, I found is:
var emptyFields = [];
for (var i = 0; i)
var f = this.getField (this.getNthFieldName (i));
If (f.type! = "button" & f.required ") {}
If ((f.type=="text" && f.value== "") |) (f.type=="checkbox" && f.value=="Off")) emptyFields.push (f.name);
}
}
If {(emptyFields.length>0)}
App.Alert ("error! ("You must fill in the following fields: \n" + emptyFields.join ("\n"));
}
-
At the start of Firefox (Windows 7), even a cold start I get a dialog with the message "the update could not be installed. Please make sure that there are no other copies of Firefox running on your computer, and then restart Firefox to try again"
I checked the Task Manager, and there is no other copy.
I downloaded the latest version of Firefox 29 but the error persists.
I have reset Firefox in the default state, but the error persists.Help please!
Hey billbuck99,
Thank you for your question, this error has been seen when there is a .parentlock file in the profile folder. There was also a bug that has been fixed in the new version 30 which came out this weekPlease complete the process and update Firefox since Firefox page in the Help menu.
-
Make sure that wire you all the inputs and outputs of your node library function call?
This document says "make sure that wire you all the inputs and outputs of your node library function call.
But all the terminals on the right side of the call library node considered "outputs" referred to in the foregoing statement?
This same document continues to show the right way to allocate memory with this illustration and in the illustration, the right "outputs" are left without junctions.
Am I right in assuming that the only terminals that count as outputs, those who use the code of the DLL (modify) as output? If it is true, then all other terminals output associated with the values entered alone so don't really account as outputs, correct?
In the parameter call-library configuration screen there is a "Constant" check box and the help that he wrote "indicates whether the parameter is a constant." What is this box? for me in the setup of the DLL call
Finally, assuming that a call from the DLL that is supposed to write in these five outputs, is it legitimate to use constants like this to book a space of memory for the output values?
How about if local variables associated with the output terminals are used instead?
Despite the linked document, it is necessary to connect the corresponding entry for simple scalar output parameters (for example a digital). LabVIEW automatically allocate memory for them. If you do not want the entries for all the output wire anyway, there should not be no difference between a constant and a local variable; I would use a constant to avoid useless local variables.
For settings that are only entries, there is not need to connect the outlet side. It's a bit simplistic since all parameters are entered only and get one result (other than the return value), you pass a memory address and modify the content to this address, but LabVIEW manages this dereferencing pointer for you. If you want to really get into the details, learn more about pointers in C.
The "Constant" check box acts as the qualifier "const" on a c function parameter. It tells the compiler that the function you are calling will not change this setting. If you call a function prototype includes a const parameter, then you must mark this as a constant parameter when you configure the call library function node. Otherwise, I wouldn't worry on this subject.
-
Make sure that 'tour windows xp' appear again for a specific user
When I create a new account, a little balloon appears in the bottom right of the screen next to the notification area that says 'Windows XP Tour'. After awhile, she disappears.
Is it possible to bring it back and make it stay there all the time? How could I do? There must be a registry setting that keeps track of the amount of time since an account was created or how many connections, so how can I change it to always do this prompt? Can I use an editor hex old-fashioned thus.
I have an old relative who keeps forgetting basic skills such as how to reduce a window, the use of the taskbar and sometimes forget that the large list of programs are now under 'all programs' (although I solved it using the start menu classic.) I don't know what I'll do when she gets a new machine with Windows 8, since this feature has been removed in 7). I'm tired of always prompting you to go to start-> all programs-> Accessories-> windows XP of the Tower, and I tried to add an icon on the desktop. I want just the reminder it so she can click it before calling me for really basic things I taught him a dozen years with his Windows 98 computer. This seems to happen more frequently, and I noticed that she is 'slide' into other things as well, so I'll try to make up for it.
P.S. I'm not sure which category I should be put under. I settled on "ease of access" because I try to help and an elderly woman in her late 90s access her computer when she keeps forgetting the basic skills. The tour is... temporarily.
Hi SlickRBCD,
If I understand correctly you have a problem with guided tour of Windows XP still appearing on specific users. Do not worry, I'm here to help you with this question.
Let us try the following steps and check if it works for you.
- Start the registry (Regedit.exe) editor.
- Locate and click the following key in the registry:HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Applets\Tour
- On the Edit menu, point to new, click Dword value, type RunCount, set the data value 1 (one) and then click OK.
- Exit the registry editor.
Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756
Please answer if the steps do not have hepl, so that we could help you better.
Maybe you are looking for
-
How to back up or restore all my groups of tabs (preferably 1 operation)?
I would like to save all my groups of tabs, both for purposes of backup, but also for migration to another computer. How can I do this in a single operation? The same consideration would apply to all the groups tab restore from a previously saved ses
-
Win 7 driver screen - resolution on NB550D problem only 600 x 800
I have the same problem as http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=64484 here But this solution does not work because when I choose 7_INF there is no 6290 radion, 6250 6310 and only Where can I get my display correct wi
-
Is it possible to store a TDMS file on a FTP server?
HelloIs it possible to store a TDMS file on a FTP server? If so, how? I tried many variations as the FTP server as a file path, but who fails to enter something! It would be really nice if someone had a ready solution. Thanks in advance Matthias Jahn
-
How to reuse an E3000 as a wired gigabit switch?
Hi, I am trying to configure my old e3000 as a wireframe only unmanaged gigabit switch, I disabled the wireless broadcast, is It is something else I have to do?. Should I enable NAT and RIP? Thanks in advance
-
Could not get the guarantee of replacement due to delays endless chat?
I have a SG300-10MP, who suddenly turns off automatically and not turn back - I even tested with a different power of a unit of the same work. All the lights on the unit turn on for about 1/10 of a second when first plugged in, then everything darke