A box appears whenever I start the laptop with the word CyHidWin to the top.

Similar Questions

• Black screen appears whenever I start the laptop.

  Last week whenever I start up my Dell laptop computer, a black screen appears. I asked someone who knew with PC and he thought that it a defective power adapter. I tried to use it on just battery, no luck. At out the battery and the adapter just tried, without success. Adapter again sold, but I will assume that the adapter is not the issue.

  Sometimes it lights for a few seconds, but the black screen appears quickly before you can do something like get online.

  I held a flashlight the monitor and the screen is almost pure... If you look closely enough. Windows has loaded and you can see the wallpaper.

  Does anyone has any idea what caused this and how to fix it. The laptop has been barely used... perhaps 6 months at the most.

  Not sure if related but all updates are underway, antirvirus installed and running whenever the PC starts. Malware program executes and returns its own.

  Any help would be greatly appreciated, especially if it's something I can fix myself.

  Thank you

  Could be that the backlight of the lcd screen has failed. LCDs are sandwiches, with layer lcd sitting in front of a layer of back light. As you can see the Windows desktop without distinction when you look closely, the lcd layer seems to work like the graphics of the pc. Is the pc still under warranty - if so, take it back to the supplier.

• On startup, I get this message. "C:\Users\Dave\AppData\Roaming\MICROS~1\Protect\bidciifh.dll" the specified module could not be found. This message appears whenever I start my laptop.

  as above

  Hello

  Cannot find this file on Google so you probably dodged some software malware and you should do a
  very thorough control. Message on how to remove the error message if still it y
  After the audits of malware.

  No one program cannot be used to detect and remove any malware. Added that often
  easy to detect malicious software often comes with a much harder to detect and remove the
  payload. So its best to be now too thorough than paying the high price later. Check
  with an extreme overdose point and then run the cleaning only when you are very
  that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap you start, however, you should
  also run in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Why integration system appears whenever I start Thunderbird... version 50b 11

  This box appears whenever I start Thunderbird. Don't know how he got into market or how to turn it off. Thunderbird works fine except that!

  If you use beta software. He often done strange things, as it is still in development. I suggest you only install the current version.

  getthunderbird.com

• How can I disable the 'Open with' window that appears whenever I start?

  My desktop pc using Windows 7 Home Premium. For years, I want to start with nothing default opening. Each time, the choice of what to open were made manually by me.

  For some reason that I don't understand, one day after start-up, this 'Open with' window appears. Under "Choose the program you want to use to open this file," the indicated file was my name. (I replaced the one here with the word "Me.")

  

  I never asked this window will open after startup. It appeared for the first time without having done me anything. I do not think that I have all the files with my first name only, so I closed the window and ignored.

  But the window open whenever I start. Don't need or want to be, I keep closing and ignore him.

  Soon, not one, but two of the pop-up appeared. Then THREE.

  For several years, the three windows double as above appeared whenever I start.

  Don't know how or why it began. Don't know which program is causing it. Don't know how to stop it.

  Anyone recognize this window? Do you know which program is causing it to appear after startup? Do you know how to disable? Is there a trick to disable three of them?

  (1) is the window 'Open with' above now a default pop-up window after startup that cannot be disabled without the registry editor?

  No, the "open with" isn't a local default value.  You see it because something - probably malware - tried to configure your computer to start a process at startup time.  Windows, however, does not recognize the name of the process (i.e. the file name) as an executable program so it asks you to specify which program to use to open the file.

  No, you don't need to manually edit the registry to resolve this problem.

  (2) there is no program in Control Panel I can open that has a simple toggle to turn it on or off?

  No, there is no program in Control Panel you can use to solve this problem.

  Here's how fix you the problem.

  A. the easy way (doesn't unless you are very lucky)

  • Click the start ORB, all programs and then scroll down until you find "Startup" and click on it.
  • If you see that anything that gets filed that you do not want to start when you log on to "Start", right click and delete.
  • If you do not know what the items listed and are reluctant to delete something you don't understand not (a very good policy to follow), list all the elements in your next reply and someone here will try to advise you.

  B. the way a little harder (that almost always works)

  • Download here Autoruns.zip (this course is that you download from a Microsoft web site)--> http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
  • Right-click on the downloaded file and select "extract all".
  • Go to the folder where the extracted files are located (this should have been opened for you by default), and then double-click on autoruns.exe
  • Wait until the program has finished scanning (look at the bottom left corner) and then select the 'connection '.
  • Look in the column titled 'Image path' for a line that includes whatever it is that appeared as the 'file' in the original pop-up window.
  • If you find a line with the same name in there, uncheck the box at the left end of the line, close Autoruns and restart your computer.
    • If the ToolTip no longer displayed, you can (a) do nothing do or Autoruns (b) re - run, find the line you're not controlled and right click > delete it.
  • If you cannot find a line with the name you're looking for...
    • Click on the "all" tab
    • Click file, and then click search, then enter the name and click "next".
      1. If a line is found, right click and select 'copy '.
      2. Paste the line in your next reply here
      3. Press F3 to find the next instance and repeat steps 1 and 2 until no more bodies are found (if there are several rows, you can open a Notepad window and paste the lines temporarily here)
      4. If you are reluctant to publish anything with your name in it, change the lines to replace your name

• MS Photo Gallery, how can I activate the "do not show this again" when the dialog box appears whenever I try to download a picture to another location?

  How can I activate the "do not show this again" when the dialog box appears whenever I try to download a picture to another location?

  The dialog box that appears frequently when I try to convert or download photos, shows the shadow of this question - I want to make it active until the times dialog box stops appearing I scroll the photo folders.

  Thank you

  I got the last part of what you wanted, which was simply not the message

  The key is that you have to allow this program through your windows firewall.

  Go to your look for the windows Firewall Control Panel,

  There should be a list to allow a program through windows firewall, look at the top left.

  If you feel safe doing this, vlc is not one that I would feel safe with, but to you, it has a function to browse to find the program to be added to your trusted list or access through your firewall.

  Still, it may give you a warning but could release the message?

• Whenever I start the computer, the error message "QtCore4.dlll missing, reinstall" appears.

  QtCore4.dlll error message

  Whenever I start the computer, the error message "QtCore4.dlll missing, reinstall" appears. Where can I find it and how do I reinstall it?

  Hello

  ·         Have you try installation or uninstalling any program like the SIMS 3 on your system?

   

  Method 1:

  The problem could be caused by some startup item or services that is loaded at startup.

  I suggest you perform the clean boot on your system and check if it helps to resolve the issue.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

  Method 2:

  Most of the customers were facing this error by installing or playing SIMS 3 game, if you also face this problem while playing or to install this game, then you can check the link below and follow the steps provided by Shekhar S.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/qtcore4dll-missing-error-while-playing-Sims-3/02735e2a-2ff6-4D29-8C8C-0852605734e2

   

• Whenever I start my laptop, this message appears: DWM - Bad Image C:\Windows\system32\d3d10_1.dll

  Whenever I start my laptop, you'll see this message:

  DWM - bad Image

  C:\Windows\system32\d3d10_1.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support

  Please help me with this question

  Thank you

  Shows generally a problem with DirectX see if this previous answer helps

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/system-error-d3d101dll-and-d3d9dll-are-missing/12b3fd74-1083-4193-BBBC-413fdf11edd7

• The Firefox HELP tab keeps appearing whenever I open the application or a new window. Firefox 3.6.28, Mac OS 10.4.11

  The Firefox HELP tab keeps appearing whenever I open the application or a new window. Firefox 3.6.28, Mac OS 10.4.11

  Ah, apparently it's reading I wanted as long as home pages; When I reset my homepage it started working right.

  Thank you

• Whenever I start the system complains that the following files are missing, c:\\Windows\System32\igfxpers.exe, igftray.exe and hkcmd.exe.

  Original title: files missing error

  Whenever I start the system complains that the following files are missing, c:\\Windows\System32\igfxpers.exe, igftray.exe and hkcmd.exe. Everything started after I ran scan and scan deleted some files infected. However, I can use the system. Where and how to download the missing files? Or how the system does not deliver messages?

  Simon

  Two of the three files are probably part of the malware infection and not the files infected. The third is probably the same details in this link:
  http://www.Runscanner.NET/file/Hkcmd.exe.html

  To identify what loads when you start using Autoruns (freeware from Microsoft).
  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig. You will find the three points and they will have a description 'file is missing' against everyone. Your antivirus software has removed the files, but not the startup entries in the registry. All you need to do is delete the entry using Autoruns to eliminate the error messages.

  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• Whenever I start my computer with Windows XP, I get the message "it is necessary to restart your computer. If I select 'YES', the system restarts and I get the same message.

  Original title: "RESTART YOUR COMPUTER IS REQUIRED" MESSAGE LOOP

  Whenever I start my computer with Windows XP, I get the message "it is necessary to restart your computer.  If I select 'YES', the system restarts and I get the same message.  Always shut up if I keep you select 'YES '.  I can work around the problem by choosing 'NO '.  How can I avoid that this message that appears constantly when I start the computer?

  http://forums.techarena.in/Windows-Update/1095335.htm

  read the above and follow the tips on adobe updater and maybe this will help.

  If this is not the case after return and include information about your machine, svc pk and IE #.

• Windows checks C file whenever I start my laptop.

  Can someone help me pls? Whenever I start my laptop, it is said that "Windows is checking file C: this file type is NTFS? I tried one of the stages of the race > CMD > etc... but it ask me I can't run this task I need permission.

  I hope someone can help out me.
  Thank you.

  Hi George,.

  You did changes to the computer before the show?

  You will get this message if the computer is not turned off properly. Windows checks file C is nothing, but it checks errors on drive c.

  Method 1
  I suggest you to run the disk check.

  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 2
  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If everything works properly in mode without failure, then perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

• Windows Explorer opens whenever I start the PC

  Hello

  I bought my lenovo laptop u410 a few days ago and yesterday the office system map begins suddenly after I booted up.
  How can I stop this? I searched the internet, but none of these solutions work.
  I looked at my card to start, but it is empty. Also, I looked in the registry editor, but unfortunately no luck.
  Can someone help me please? Thank you!
  Original title: desktop card system suddenly starts up?

  Your problem is

  Windows Explorer opens whenever I start the PC

  - - - -

  I suggest that you change the question - just click on the Edit link, you can see right under him [almost where I would be selecting the link address instead].

  - - - - - -

  Also, check these settings: -.

  1 in Windows explorer, Union, file & search options, see tab, [down] restore file when connecting windows - make sure that is not selected.

  2 click the Start button, the cursor on the entry for all programs, right click, select Open, double-click programs, double-click Startup - check that you don't have a Windows Explorer shortcut it.

  3 click the Start button, hover over the entrance for all programs, right-click, select open all users, double-click programs, double-click Startup - check that you don't have a Windows Explorer shortcut it.

• I want desperately to upgrade Firefox to version 10 of version 9, but whenever I try, I'm stuck with FF10 control addons for comparability and opening the homepage whenever I starts the browser.

  Windows 7 64 bit
  I want desperately to upgrade Firefox to version 10 of version 9, but whenever I try, I'm stuck with FF10 control addons for compatibility and opening the homepage whenever I starts the browser. I keep having to go back to version 9 to solve this problem.

  Sorry to be a while back! It tried unsuccessfully so this AM, gritted my teeth and deleted the FF programs folder and downloaded and installed FF 10.01. He was still struggling with the same problem. Went in the appdata folder and two files sessionstore.js there. Delete both, restarted the browser and no verification of the compatibility of the modules was done at first upward and the additional tab for welcome to FF was the opening is no longer all seems to work as it should and I did not lose any of my settings... Thanks for trying to help, and I hope that my solution helps someone else who could this experience in the future. Hoping that the next update will smoother!

• How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point

  How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point. I've been messing around with the without success. I'm under Labview 2012.

  Thank you!

  Townes wrote:

  I can't understand what you mean. I have no formal training with labview. It took me a long time to write the simple program that I joined. Any guidance would be greatly appreciated!

  Its pretty normal for a beginner to take the time to write code. Right-click the map of waveform > Create > property node > historical data, you will get a property node, keep this at the beginning of the code and create a constant. You can also go to the VI properties and > run and select "clear indicators when it is called.

  I recommend you to go through the basic materials of LabVIEW which will give you an understanding on the basics of bases/components of LabVIEW.