a broken ethernet port can be fixed

Similar Questions

• Satellite C660 - ecxhange broken USB port can I?

  People watch what is my problem: my child has presented upside down a cable to the USB for laptop and now it of broken, can you tell me if it is welded to the moatherboard or is an interchangeable part?

  Thank you!

  Hello

  A USB port is part of the motherboard.
  I think you need to replace the motherboard to fix this
  :(

• The Ethernet port integrated on a support of Office P7-1423w Wake on Lan?

  I have a P7-1423w computer to office with an integrated Realtek PCIe Gigabit Etherent port on the motherboard.

  I compatible Wake on Lan in the BIOS, activated Windows Power Management so the Ethernet port can wake the PC, updated the Realtek drivers and set all the parameters of the driver that I can see to activate wake lan, but it doesn't seem to work.

  I noticed that there is no seeing liaison on the port when the PC is turned off, who told me that he will not wake up no matter what.  Is there a way to activate the Ethernet port to stay when the PC is off on this model?

  Thank you.

  Rzgui.

  The image below shows where to turn off Fast Boot.  Do a double control to make sure that your power setting are correct.

  

  If you are looking for on the net, you should be able to find one. I suggest that investigate you the possibility that magic 'package does not happen the adapter.

• my macbook pro 2015 lacks an ethernet port. How can I connect using ehternet?

  My macbook pro doesn't have an ethernet port. How can I connect my wifi is spotty, but the wire is good? Thank you!

  You will need an Ethernet to USB connection

  http://www.Apple.com/shop/product/MC704LL/A/Apple-USB-Ethernet-adapter

• How can I transfer the mail, Safari, iTunes, etc of my 2008 MacBook running OS 10.5.8, a new MacBook Pro (with Ethernet port) or a new MacBook Air?

  I replace my 2008 Macbook which maxed out at OS 10.5.8, with a new MacBook Pro or MacBook Air.  The Pro has an Ethernet port, the Air is not.  I want to transfer all the data from my application (mail, Safari, iTunes, etc.) for the new Macbook that will run El Capitan.  How can I do?

  What machine you're leaning towards? With Air, you have to use ether WIFI or have the old drive on an external drive configuration. With a new Macbook Pro, the simplest method is to use the migration assistant. Access your Macbook in public services and to see, there you have it. Here is a link to what you can do.  http://pondini.org/OSX/SetupLion.html It is said Lion, but it applies the same. Here's what apple says.  https://support.Apple.com/en-us/HT204350 you should know that some of the apps in Leopard will be obsolete in El Captian. There you transfer, it can cause problems. I use the thinking that if I can replace it with a download I do this. The transfer or, if there is an update for it.

• How can I fix it? "Money cannot connect to the store purchases.   If you have any firewall software, make sure it has been set to allow communication on port 443.

  This message p [ops upward when I run iTunes]

  Money cannot connect to the store purchases.

  If you have any firewall software, make sure it has been set to allow communication on port 443.

  How can I fix it?

  me too... same problem... just started

  iTunes can't connect to the store purchases.

  If you have any firewall software, make sure it has been set to allow communication on port 443.

  MacBook Pro, osx el cap 10.11.1, itunes 12.3.1.23

• How can I configure two ethernet ports to connect to a VPN with Windows Server 2008?

  Something I can put in place, but im stuck with an error that I get is that I need two ethernet ports to configure vpn but why and how do I make it work I like

  original title: vpn windows Server2008

  In order to configure the VPN, you can take a look at:

  http://TechNet.Microsoft.com/en-us/library/cc725734 (WS.10) .aspx

• Port: 25, secure (SSL): no, Server error: 530, error number: 0x800CCC78. How can I fix it? TWC tells me its a problem with Outlook.

  I receive the following message if poster when you send an email from Outlook Express 6 'the message couldn't. not sent because the server rejected the sender's e-mail address ' Server: ' smtp - server.twcny.rr.com', Protocol: SMTP, server response: ' 530 authentication is required before sending [R0107005] ', Port: 25, secure (SSL): no, Server error: 530, error number: 0x800CCC78.  How can I fix it? TWC tells me its a problem with Outlook.

  Technical issues do not belong in the forum Feedback response so I moved your post to the WIndows XP "Netwoking and online" Outlook Express forum where questions are handled.

  Outlook and Outlook Express are completely different products and are not related except for the names.

  The problem you describe product generally when you have not defined thte option to authenticate your outgoing SMTP server.  If you click on tools > accounts, select your account, then click Properties, you should see a Servers tab.  This tab is a check box labeled "my server requires authentication".  Check it out.  Then check the settings button to the right.  You'll see two radio buttons.  From the top, labeled 'Use same settings as my mail server outgoing' is generally the right to choose.

• I get a 'match of port' error how can I fix that I have an HP Officejet 6500 A Plus

  I ran print and scan of the doctor.  It gives me an error "game port.  How can I fix it?

  I use Windows 7.  I solved the problem.  I have to uninstall and reinstall the software and drivers for the printer.  Frankly, I had any other problems with this printer.  I really want to throw it out the window, but I paid too much for her, is the only printer that I have, and it is less then 1 year!

  Thanks for your reply, however.

• Can workstation make me use the ethernet port on the remote computer?

  Ideal solution would be:

  I have specialized software on my computer I want to use without installing it on the remote computer.

  For now, I have to because the software uses the ethernet computer port to do a job, the software is used to.
  

  
  

  (1) is there a solution out there for everything just to connect to a remote computer and make use of its ethernet port remotely?
  

  
  

  Someone told me that VMWare Workstation last night. Maybe it's completely off-base.

  
  

  If this remote computer is connected to another computer via an Ethernet cable, but not for the internet, only data.

  For me to be able to connect to it, the remote computer must maintain a simultaneous Wifi connection as well.
  

  I use Teamviewer to fight against it.

  
  

  (2) if 1) above is not possible, I'm back to my current setup which is to the software me, I need on that remote computer. But my problem is that it does not seem possible to have WiFi and Ethernet connections at the same time.

  Please correct me / explain how if I'm wrong.

  How can be useful to me in these scenarios Workstation?

  Thanks in advance for your help. I'm looking everywhere for more than a week.

  I read that you wrote in your OP several times and no offense not expected however it is not well presented and I find I have to ask the many requests for clarification, however, I will say this...  A Virtual Machine is presented only a wired Ethernet adapter no matter how the host connects to the LAN/WAN and if you need to wired Ethernet and WiFi Ethernet in the Virtual Machine, and then in addition to the default wired Ethernet you can also provide your own card Ethernet Wi - Fi USB to connect to the virtual machine as well as the two available to the virtual machine at the same time.

  Others while I won't waste time asking a bunch of questions and if you want to take an another stab as describing in explicit and specific in detail what you have and are trying to accomplish, then I add more to the discussion.

• My device drivers for PPCDDVDW-TS-H653R and BAG Virtual Cdrom USB ports have a problem whose diagnosis can't fix. How can I reinstall these drivers?

  Can I fix it myself or should I take my computer to an expert?

  Hello

  (1) operating system do you work?

  (2) what is the exact full error message?

  You can try the following methods and check the status of the issue.

  Method 1:

  Your CD or DVD drive cannot read or write media.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2:

  Update of the CD/DVD-Rom drive. see the following article.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• a picture shows fine in design mode, but it is broken online. How can I fix it?

  I have an image in my folder of the local site with my index.html page.  I insert the image in a table on the page, save and develop the site. the site displays the table but shows just the image is broken.  How can I get the image appears on the Web site?

  The problem is that you set the location of the image as/public_html/splashpage.jpg. It should simply be splashpage.jpg.

  It seems that you have configured your remote server definition incorrectly. The root directory must point to the public_html folder, and the value of the URL of the Web should be http://www.rrrdesign.net.

  In addition, it is a good idea to create a folder for images. It helps keep everything in a logical order.

• Ethernet port on iMac 2013 does not connect

  iMac 2013 WiFi works, but slow (25 to 40 Mbps off potential 250 + Mbps. Somedays as fast as 179 Mbps wifi, but not lately) router misplacement slows me down and very hard to change the location of the router. Ethernet cable is good. Cable used to work with the iMac, but now it does not work. Not sure if hardware problem, or if the updates of the AOS has caused. Same cable works always with older macBook and iMac. 270 Mbps with the cable connected to the MacBook. A detailed visual inspection of the port does not bent pins. New looks.  Ports of the router has changed. Changing cables. Reset the router. You wonder if El Capitan or other updates might close port? How to re-enable?

  OS X El Capitan to 10.11.5

  iMac 21, 5 - uh 213

  Processor Intel Core i5 at 2.7 GHz

  8 GB 1600 MHz DDR3

  Broadcom 57766-A1:

  Name: ethernet

  Type: Ethernet Controller

  Bus: PCI

  Vendor ID: 0x14e4

  Device ID: 0 x 1686

  Subsystem Vendor ID: 0x14e4

  Subsystem ID: 0 x 1686

  Revision ID: 0x0001

  Width of the link: x 1

  BSD name: en0

  Kext name: AppleBCM5701Ethernet.kext

  Firmware version: 57766a - v1.13, 0x010e63c4

  Location: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleBCM570 1Ethernet.kext

  mDNS capable unloading: 68:5 b: 35:7e:f8: ff

  Version: 10.2.0

  In addition, Apple Support recognizes that they broke the Ethernet Ports and suggest that if we:

  "Kernel Extension Configuration Data incompatible Version 3.28.1" we can fix it by going to the command line entries.  However, this version is not on my computer. I have 3.28.2 since 29/02/16 and articles 3.30.1 06/04/16 and 17/04/16.

  They say on the following link:

  If the Ethernet on your Mac has stopped working recently - Apple supports

  If you can connect to Wi - Fi, follow these steps to update to version 3.28.2

  1. Open the activity monitor, located in the Utilities folder of the Applications folder.
  2. Select the CPU tab in the activity monitor, and then type "up-to-date" in the search field. The process of softwareupdated should now be the only listed element.
  3. Open the Terminal application, which is also in your Utilities folder.
  4. Enter this command in a Terminal to upgrade to the current version of the extension of the "Incompatible Kernel Extension Configuration Data" kernel:

     sudo softwareupdate --background

  5. Enter the admin of your OS X user account password when prompted.
  6. Switch to the activity monitor. When using the processor (CPU %) of the process softwareupdated is reset, the extension of the core must be updated.
  7. Select restart in the Apple menu to reboot your Mac.

  I prefer not to do that since I could break it's worse and I 3.28.2 and beyond.

• Pavilion HP 11: ethernet port on hp pavilion 11 fried... solution... ?

  Hi all

  new to the forum here and decided to join because I have a little problem with my laptop...

  I did something stupid today. I tried to program a hitachi PLC with my laptop and accidentally hooked the ethernet cable to the port of evil on the controller (the port that would normally connect to a touchscreen / HMI) with the result that my port ethernet on my laptop got fried. After a few seconds smoke started coming on my laptop from under the keyboard so I quickly janked out cable ethernet. It's only there for a few seconds, but the damage was already done.

  On the good side of things: everything seems to work OK again. WiFi still works. Only problem is that this laptop has a single ethernet port and I really need this port.

  I took the cover but nothing obvious comes out. I know it's kind of a vague question to ask; but someone would have ideas on what could have broken and how to check what might be broken and what not?

  I'm not very familiar with computers is passing, so forgive my lack of knowledge.

  Thanks in advance

  A network card is not present, there is a wireless adapter.

  Ultrabooks like yours with RJ-45 ports do not have separate wired adapters that can be replaced.

  The NETWORK adapter is part of the motherboard and is not replaceable individually.

  Given that yours was smoked checked there may be some damage of traces on the motherboard.

  With the help of a mulitimeter won't help in any way. Even at big books in ancient times the NIC was part of the motherboard. A ultrabook is not a desktop computer. Motherboards same office have the network cards integrated into the chipset.

  Replacing a motherboard, this is how your network port fried will have to be resolved. Otherwise, to avoid the cost of replacing the motherboard, use the USB cable card NETWORK adapter.

  Under the guarantee, the induced lesions of the RJ-45 port owner is not covered. It's an excluded damage type.

• Ethernet port disappears

  I'm on a MacBook Pro, end of 2013, El Capitan 10.11.3 running.

  Just today, I went to run a test using my Ethernet card rather than my wireless adapter and I couldn't connect.  I spent more than an hour to get to the next State:

  1. The operating system cannot see the Ethernet port.  If I run the system information report the Ethernet port is not listed.  Initially, I got the Ethernet port defined in my automatic position.  When I opened and went to advanced-> Hardware, I couldn't see my mac address and the configuration was virtually empty.
  2. After that a lot of research I restarted with the ethernet cable is connected and press command + r.  When the diagnosis came, I select Network Diagnostics.  There, I could see my card Ethernet, the mac address and the assigned IP address.  I disconnected the cable and saw the idle connection.  I reconnected it the cable and the returned connection active.
  3. I tried to reset the NVRAM using the Option + command + r + p, but without success.

  It is clear that the hardware is functional.

  How to restore the connection in the operating system?  I tried to add manually the ethernet card, but because the operating system does not see the adapter is not available to add manually to the location.

  I need help solving this problem.

  Hi George:

  Found this information. See if she can relate to you. http://9to5Mac.com/2016/02/28/Apple-confirms-OS-x-update-broke-Ethernet-port-on-some-Macs-heres-how-to-fix/

  Kim