a cartridge 26 replace a cartridge 82 a design jet 510 does

Similar Questions

• I had to replace my hard drive and now my key does not work

  I had to replace my hard drive and now my key does not work, it keeps giving the error 0xC004E003

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Activation error: 0XC004E003 http://support.microsoft.com/kb/938450

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Photosmart D110a: installed the new HP black ink cartridge and now the black ink does not print

  Just installed a new print 60xl cartridge to replace the one that was being ink. Now the black ink basically does not print. I cleaned the cartridges 4 times and run all Diagnostics pages. The black prints just a small piece of the upper part of the letters on the pages of diagnostics and in grayscale on the test pages.

  Hello!
  Welcome to the HP Forums, I hope that you are @janmacwill,

  I saw your post on the black ink does not print your Photosmart D110a and I wanted to stop making you share my suggestions. See the link below to solve the problem and if the black still does not print, contact HP (below) to see about a replacement unit.

  Printer prints a blank Page or doesn't print black or color ink for the printer series HP Photosmart e-All-in-One (D110a and D110b)

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up".

  to say thank you for my help.

  Have a wonderful day

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once will open the support page please select the country in which you are

  located. Then enter your model of HP on the right number.

  (2) then choose the 'Contact Support' tab at the top and scroll down to the

  bottom of the page "HP Support - Contact" to fill in the form provided

  your contact information.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select ' Get phone

  number. "A file number and telephone number will now fill for you.

• Black ink cartridge Photosmart Plus B210a 364 black does not print black.

  Clean the printer heads. Have done everything in my power to solve the prob. No luck.

  All the other colors print.

  Defective cartridge?

  I wouldn't party w my printer because I'm very happy w it. More I have 5 unused ink cartridges and they cost a few .

  Edit: guess what? Soaking, as described in the section resolved this Forum did the trick! Dried the head w printer a couple of (very gently tap) coffee filters and this is! The printer print black!

  Phew!

  For others looking for a solution, the details of soak the printhead for printers with removable heads are available in the post here.

• Ink cartridges HP Color Laser Jet 2500 L

  I bought 5 cartridges in 2012 - my printer died and I now these 5 unused cartridges in their original unopened boxes. Too late for the retailer to take their return and HP use I didn't buy their HP. Any suggestion or any interested party - I'll sell it at a discount - I paid $459 +.

  Hi disciplej5,

  If the new printer is HP brand, you can participate in an exchange of ink.  The cartridges must be new, not open the HP brand, in original packaging and under warranty.  Here is the information you will need.

  1 send an email to the following address:
  [email protected] a.
  2. use the following topic:
  a. request to Exchange unused print supply, unopened, under warranty
  3. include the following information in the email:
  a. Water Service Ticket # :---> you won't have it unless you have call HP support.
  b. best customer phone number:
  c. a history of the situation:

• Laser Jet MFP M127fn Pro: can I get a color cartridge for my laser jet MFP M127fn pro

  Can I get a color for my laser printer cartridge? Please let me know. Thank you

  Thank you very much for your help to explain to me.

• Need help to install the cartridge in HP Laser Jet P1505

  I don't know how and where to install carterige new HP laser jet printer model # is P1505. I need very simple instructions please and thank you for a girl very uneducated.

  Moved from feedback

  Original title: well first of all I'm a newbie to all the ends of the life of this computer.

  Hello

  See if this document from HP helps:

  http://h10032.www1.HP.com/CTG/manual/c01295011.PDF

  Don

• All messages in an IMAP account disappeared and replacement of Inbox with a registered earlier version does not work

  A week ago, all of my emails saved on the My Yahoo IMAP account Inbox disappeared from Thunderbird on my MacBook and also from the server. Two other folders in the account to which I had previously transferred emails remain intact.

  I tried replacing INBOX-1, INBOX-1.msf and INBOX.msf in the imap.mail.yahoo.com folder (Library>Thunderbird>Profiles>n2j0cgku.default>ImapMail>imap.mail.yahoo.com>INBOX&c.)
  

  -with older backup versions (about 12 MB of emails) but on restart Thunderbird, none of them appeared in the account, and when I looked at INBOX-1 once again, he had emptied and contained only a few bytes.

  Does anyone have a work around to make Thunderbird accept the old Inbox? Thank you!

  You can try this add and see if he can recover messages you protect in your local folders. If bring you it to a local folder, you may be able to retrieve them from the server.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

  I have not used, but it is often referred to here in the forums.

• Design Jet 5500: replacement of printhead

  Hello

  I'm trying to replace the printhead on the HP DesignJet 5500 and following the instructions in the manual and the video guide on the CD (which is straight forward), but come with a question.

  I have reached the stage of "Sunrise door above wagon" and a few seconds the print carriage moves back behind the front before the step of "pull and release the latch on the top of the cart. I am concerned when I release the lock to reveal the print heads to get behind the front until I had time to replace the print head and cause damage.

  Why the printhead carriage moves during this process? Is there a way to stop this, so I had time to replace the print head?

  Thank you

  On the right side of the top cover is a protuberance that based on a small switch in a hole at the top to indicate to the printer top cover is closed.  When you follow the instructions to replace the print head, the carriage moves to the left and wait about 30 seconds for the roof to open, knowing that he opened when happening releases.  On your machine, the switch for a reason not publishes so the printer think that you do not change the print head and transportation goes back. See if something is crowded in that little hole.  If you bought the printer from someone, sometimes, when he is assured that breaks switch for technicians find a way to activate it otherwise the plotter will not work.  Last use what you need to do and stops is when the carriage moves to the left is turn the printer off with the switch at the rear of the machine. Then change the print head, close the lid on the transport and the top cover, turn on the power and when the printer has completed initialization is calibrates the printheads.  To test if I'm right, just open the Center cover with the printer by hand or replace the print head message.  It should tell you to close the cover and is it does not means that the switch is always on.

• Had replaced screen on the ipod photo now 5 does not

  The screen replaced on the iPod as it broke down, once went to use the camera and the screen is black and won't let me take a picture

  Back to the place where yo get the screen replaced and d tell them fix the problem.

  If you have replaced the screen take it apart and look got loose connections. Also, maybe the camera has been damaged.

• ... Replaced HP wireless mouse batteries, the left button does not work

  HP wireless mouse... dies, replaced batteries... wheel works, works of pointer, inoperative, to the right of the button to the left

  her sci

  Thanks for trying to help. I tried the solution, but too complicated for me. I'll remove the mouse, buy another and
  From there on. Fortunately my finger can operate most of what I need this computer.
  Good old Geekster test

• Buffer could replace the queue in the design of producer/consumer model

  Hello

  I have a question to which the task of buffer to store the data and the queue is also of the same thing so we could use the inplace queue buffer in a design of producer/consumer model.

  No, these examples of buffer not almost equal to a queue, and never "replaces" queue at the producer/consumer.

  The advantage the most important of the queues for the producers/consumers (which none of the other mechanics buffer sharing), it is that it works activities to warn the reader that the data is available. So if you would simply replace the queue by mechanics of tampon too developed that you have attached to your last post, you will lose a large part of the object using producer/consumer.

  Thus, to compare the two mechanics:

  -Tail works activities, while the example of the buffer is not.

  -Tail must allocate memory during execution if several items are written in that corresponding queue. This also applies to the buffer (must be resized).

  -Given that the buffer is actually simply a table with overhead, memory management becomes slow and messy with the increase in fragmentation of memory. Queues to play much better here (but have their limitations, there also).

  -Overload of the buffer (the table manipulation) must be implemented manually. The queue functions encapsulate all the necessary features that you will need. So the queues have a simple API, while the buffer is not.

  -Given that the buffer is simply a table, you will have a hard time sharing the content in two parallel running loops. You will need to implement an additional charge using data value references to manage the buffer or lose a lot of memory using mechanics as variables. Lose the memory, you will probably encounter racing conditions so don't think not even on this subject.

  This led to four '+' for the queue and only a single point where 'buffer' is equal to the queue.

  Hopefully, this clears things up a bit.

  Norbert

• How to let sfc.exe replace damaged dll cache files when presario v3000 does not see xp pro cd?

  Hello

  SFC. EXE/scannow ask me to put my xp pro disk, so it can copy files into the dll cache.  When I put the disc in the cd drive, he said something to the effect of "you must have used the wrong disc or the disc is damaged" and just stop there.

  My cd/dvd drive is not presented in win Explorer or the Manager of devices for about 2 months now.  I did each every every thing, including the removal of the upper and lower filters 2 weeks ago (I deleted the wrong key registrey and just now in my office!).  I do not think that caused sp3 cd player to disappear, as I've been running for a very long time now and the cd player that disappears is fairly recent.

  My question is: How can I get the dll files in my cache dll if my cd player does not work?  Maybe corrupt dll files are what initially is the cd player to disappear.  I tried to copy files to a flashdrive system32 but sfc will seek only a cd player.

  Thank you very much...

  Liliane

  Hello

  SFC. EXE/scannow ask me to put my xp pro disk, so it can copy files into the dll cache.  When I put the disc in the cd drive, he said something to the effect of "you must have used the wrong disc or the disc is damaged" and just stop there.

  My cd/dvd drive is not presented in win Explorer or the Manager of devices for about 2 months now.  I did each every every thing, including the removal of the upper and lower filters 2 weeks ago (I deleted the wrong key registrey and just now in my office!).  I do not think that caused sp3 cd player to disappear, as I've been running for a very long time now and the cd player that disappears is fairly recent.

  My question is: How can I get the dll files in my cache dll if my cd player does not work?  Maybe corrupt dll files are what initially is the cd player to disappear.  I tried to copy files to a flashdrive system32 but sfc will seek only a cd player.

  Thank you very much...

  Liliane

  First, run fix cd carpet first to see if it will solve your problem with your devive rom.

  http://support.Microsoft.com/kb/982116

  A description of sfc / scannow from MS.

  "System File Checker allows an administrator to analyze the files all protected to check their versions." If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker. »

  http://support.Microsoft.com/kb/310747

  When you receive the error message you have inserted the wrong disk, it could be the drive has bad service pack, or it could be that the system searches for the wrong drive.

  Click Start > run > type regedit > click ok.

  Navigate to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup . Click the "setup" folder to expand the content in the right pane. Scroll through the list in the right pane and look for "SourcePath". Make sure that the source path is set to the drive letter of the rom of the device.

  If the source path is set correctly, I suspect that the disc contains a pack of different service that is installed on the computer. There is a solution to this as well.

  Click on the link below and download the Service Pack 3 for IT Tech. Save the file. Once the download download and install the trial version of Winrar from the second link below. After Winrar is installed, right click on the Service pack 3 file and choose "Extract here" with Winrar. When the extract window opens type C:\ in the location of file for the files to be extracted. This will place the file i386 in the root of the C drive. Then, return to the instructions above for the source path and replace the source C:\ path. Now, run sfc/scannow again.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en

  http://download.CNET.com/WinRAR-32-bit/3000-2250_4-10007677.html

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Replaced drive now in lieu of a State, does that mean?

  I had a drive fail in a PV hanging off a PERC 6, and it rebuilt to the hot spare fine.  Now I'm put a new drive in the slot where the failed drive was, went into the RAID BIOS where I assumed it would be in a Ready state and waiting for me to mark it as the new hot spare, but it is in a Replacing state, not Ready, so I cant mark it as the new hot spare. Does this mean its rebuilding from the hot spare to that new drive and then the former hot spare now live drive will go back to being the hot spare again?
  

  Hello rjo80,

  Yes the hot spare is to copy the data on the replacement drive & once it's over then it will go back to being a spare disk.  On the PERC card, there is a feature that recalled the copy that has been activated & with that enabled that is why u who sees in the PERC bios.

  Please let us know if you have any other questions.

• Windows 8 Pro update replaces Conextant sound installed with a sound THAT DOES NOT WORK Microsoft! How do you get the Conextant reinstall

  Installed Win 8 Pro on a Lenovo ThinkPad (SL500) #2746BKU with Vista.    Everything seems to work, but no sound except unplug the power Pak.  I downloaded all driver Conextant kits & Microsofts drivers without result.  When you check the Device Manager it shows a Microsoft sound in the SOUND VIDEO AND GAME CONTROLLERS properties.  The two see the Lenovo & Microsoft Research unanswered who worked.  Under speaker system it shows no driver installed BUT THAT WORKS WITH a BEEP when you start the machine.

  HAS ANYONE FIGURED THIS OUT?  I downloaded & installed large files that don't work.  8 win changed the name of the sound chip Conextant to a manufacturer of Microsoft.  So when you try to install the drivers conextant he can't find it.  If you uninstall it still can't find it because that win 8 it changed a Microsoft legacy.

  Help I sold it but not without noise.

  Hello

  Try to uninstall the Microsoft drivers and resettlement the Conextant...

  While you are in Device Manager try to disable the device, restart, then try Conextant drivers...

  I don't know that win 8 has actually changed your device. First of all, it is not physically possible to

  'replace it with one made by Microsoft', but he might have changed its identifier...

  I think that what you see is a VIRTUAL Microsoft device... My machine has one of these...

  A normal RealTek audio chip and an imaginary Microsoft chip. lack of a better description.

  Probably your Conextant is simply not appear, what makes things appear weird...

  Try to install your Conextant in Compatibility Mode drivers\software, or right click on the installer and select troubleshoot compatibility...