A curious "anomaly" with the NATURAL JOIN compared to join HER for HELP

Similar Questions

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• With the updated 31.4.0 version - demand for return confirmation and email send priority disappeared. How can I access them now? Thank you!

  With the updated 31.4.0 version - demand for return confirmation and email send priority disappeared.
  How can I access them now?

  Thank you!

  Did? I find in the title bar of the alternatives

• Is the old puzzle slide with the Rainbow Apple logo always around here?

  Is the old puzzle slide with the Rainbow Apple logo always around here?

  For people who still have the old Mac OS 9, it is, but you must before mid-2006 PowerPC Mac to run it in classic, or to get a such a Mac ROM to install with a program called Sheepshaver.  Depending on your country, get a such ROM cannot be legal.

• Can we synchronize permission selected with the settings of operating system Notifications BB10 for our Application.

  Steps to follow:
  BB10 device--> settings--> Notifications--> Applications--> [name of your application]--> all alerts [Toggle button]

  I have an obligation to check whether or not 'All alerts' is allowed through settings when the application is running. To check if we can synchronize permission selected with the settings of operating system Notifications BB10 for my application. How to get javascript code if alerts permission is on / off, while the application is running.

  I tried adding the blackberry.system function and tried to hasPermission (blackberry.push) also, I can't determine if permission is allow / prohibit... Please suggest how to get that.

  I don't see a WebWorks API for this. If I expected to be anywhere, it's here:
  https://developer.BlackBerry.com/HTML5/APIs/beta/BlackBerry.notification.html#jbo1385148829097

  But it seems that this API has not been fully implemented; It may be useful to connect a developer Issue Tracker JIRA to get this feature added.

  At the same time, there is this API of Cascades that looks like what you're looking for:
  https://developer.BlackBerry.com/native/reference/Cascades/bb__platform__notificationapplicationsett...

  Write an extension for this feature should allow you to access this feature:
  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/template

  At the same time, a colleague is currently working on an extension that should open many features of Qt, and I think that the API above should be accessible through this extension. He must be released over the next week or two, so you can wait for that as well.

  EDIT: On this last point, see this extension which provides a mechanism for attaching in the majority of the Qt APIs.

  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/QtBridge

• I am using windows 7 and my computer laptop wifi does not connect to the modem. It worked correctly with the other modems. I had the prob with the new modem provided by optus. can someone help me please?

  my computer laptop wifi works with other modems. and my modem works with other laptops. they have one problem with each other.

  I don't know why, please help me...

  Hello Omar.

  Thank you for keeping us posted.

  It seems that you did not try the method 2 and 3 after running the troubleshooter from network. Please, try it both ways and see if that solves the problem.

  Reply with the results. We will be happy to help you.

• What can a left-handed user with the natural ergonomic desktop 7000?

  Hello

  I am convinced that the keyboard in the 7000 natural ergonomic office would be the best for me. However, I am left-handed, so the mouse that does not work.

  So I was wondering what Microsoft wireless solution is recommended. I don't see the keyboard available separately. So I need to get an ambidextrous mouse separated and use two USB receivers on two USB ports? Or the USB receiver that comes in this set can be programmed to operate with another mouse?

  Thanks a bunch,

  Alan

  As near as I know it, MS does not the keyboard of the "Desktop 7000' available separately.  The "natural ergonomic Keyboard 4000" MS looks like - from the site, in any case - being identical to the keyboard of the updated 7000 except that she is wired rather than wireless.

  It depends on what is important to you.  If you want the keyboard with a WiFi feature, then you will need to buy the 7000 set, take the mouse and buy a different mouse.  You can buy a standard mouse (wired or wireless), a mouse "Ambidextrous" MS (wired or wireless), or there is an ergonomic mouse for left-handers available by other sellers, for example, http://www.thehumansolution.com/left-hand-ergonomic-mice.html and Google.

  Otherwise, buy 4000 wired keyboard and mouse of your choice.

  The only downside I see to have a separate keyboard and mouse is that you need to use the two USB ports - but most people already do.  I had two (the pointer of the mouse and presentation) wireless devices connected to a laptop without any problem of interference at all.

  To answer your last question, I don't have the final answer (because I have no MS info inside), but I'm sure that you can not do anything with the transmitter/receiver that comes with a mouse without a wire and/or keyboard 99.99999%.

• Need help with the condition join in SQL

  Hi all -
  
  I need to ask for help with this query:
  
  Create table user_tab_col_test (varchar2 (30) from table_name, column_name varchar2 (30), data_type varchar2 (30));
  
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('table1', 'column1', 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('Column2', 'table1', 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ("Column3", 'table1', 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('column4', 'table1', 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ("column1", "table2", 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('table2', 'column2', 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('table2', "Column3", 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('table2', 'column4', 'varchar2')
  Commit;
  
  Create table all_cons_columns_test (varchar2 (30) from table_name, column_name varchar2 (30), constraint_name varchar2 (30))
  
  Insert into all_cons_columns_test (table_name, column_name, constraint_name) values ("table1", "column1", "primary")
  Insert into all_cons_columns_test (table_name, column_name, constraint_name) values ("table1", "column1", "secondary")
  Commit;
  
  This is my query and the current result:
  
  Select u.table_name, u.column_name, c.constraint_name
  Of user_tab_col_test u
  Outer join all_cons_columns_test c left
  On (u.table_name = c.table_name
  AND U.COLUMN_NAME = C.COLUMN_NAME
  AND C.CONSTRAINT_NAME IN ('main'))
  order of U.table_name, U.COLUMN_NAME;
  
  TABLE_NAME COLUMN_NAME, CONSTRAINT_NAME
  ------------------ --------------------- ----------------------------
  Table1 primary Column1
  Table1 Column2
  Table 1 Column3
  Table2 Column1
  Table2 Column2
  
  
  Three questions:
  (1) I don't want to return results where table_name = "table1". I can't get this to work.
  (2) is my proper request and this is the best way to return my desired results? For example, I want all of the columns of user_tab_col_test and I want to only display the constraint_name from all_cons_columns_test argument if the argument constraint_name = 'primary '.
  (3) will be the synatx be the same if I need to join a third table to all_cons_columns_test?
  
  Any advice/suggestions are appreciated-
  John
  
  Published by: user703358 on January 11, 2013 20:57
  
  Published by: user703358 on January 11, 2013 21:48

  Hi, John,.

  user703358 wrote:
  Hi all -

  I need to ask for help with this query:

  Create table user_tab_col_test (varchar2 (30) from table_name, column_name varchar2 (30), data_type varchar2 (30));

  Insert into user_tab_col_test (table_name, column_name, data_type) values ('table1', 'column1', 'varchar2')
  Insert into user_tab_col_test (table_name, column_name, data_type) values ('Column2', 'table1', 'varchar2')...

  Thanks for posting the CREATE TABLE and INSERT.
  It is more useful if you post the code that can be run without modification. You did not semicolons after INSERTION instructions.

  Three questions:
  (1) I don't want to return results where table_name = "table1". I can't get this to work.

  What have you tried? Post your best attempt.
  Here's one way:

  SELECT    u.table_name
  ,        u.column_name
  ,        c.constraint_name
  FROM             user_tab_col_test      u
  LEFT OUTER JOIN  all_cons_columns_test  c
                          ON    u.table_name     = c.table_name
                 AND   u.column_name     = c.column_name
                 AND   c.constraint_name IN ('primary')
  WHERE       u.table_name     = 'table1'          --  *****  NEW  *****
  ORDER BY  u.table_name
  ,            u.column_name
  ;
  

  You would not put this condition in the clause; who controls what is considered as a match between the tables, and "u LEFT OUTER JOIN c" means show all lines of u, even if they do not have a match in the c.

  (2) is my proper request and this is the best way to return my desired results? For example, I want all of the columns of user_tab_col_test and I want to only display the constraint_name from all_cons_columns_test argument if the argument constraint_name = 'primary '.

  Basically, this application is very well.
  It displays all the columns of user_tab_col_test; missing data_type. Just add u.data_type to the SELECT clause, or change the SELECT clause

  SELECT    u.*
  ,         c.constraint_name
  

  (3) will be the synatx be the same if I need to join a third table to all_cons_columns_test?

  Do you mean "" * add * one-third * column * to all_cons_columns_test '? "
  It depends on what results you want. Post new CREATE TABLE and INSERT and instructions the results you want new data.
  Most likely, the basic structure of what you've written will remain exactly the same.

• Problem with the natural language search

  I have a document with the words "retirement payment options. When I type the question ' what are my pension options?, "I get the message"Sorry, we don't have find a good answer to your question." I tried to use synonym and synonym of directional groups pertaining to 'options of retirement', 'options of payment of retirement,' 'options' and 'payment options' together, without success. Even when I type the exact title of the document in the search box and start search, I come back with no results found.
  
  I want to know is how the natural language search determines what are the topics to display.

  Discovered that the problem was the updating of the .nls file. The file should be renamed and a new one created.

• Need help with the ANSI Join syntax

  Version: 11.1.0.7
  
  I have my select statement that returns 3000 lines and looks like
  

  select ..
  from tab1 a,tab2 b,tab3 c
  where a.c1=b.c1 and
  b.c2 = c.c2(+)
  and ...
  group by
  ..

  I want to convert it to ANSI SQL, because it must be able to Hibernate, and the developer says that Hibernate include only ANSI SQL. I tried something like
  

  select ..
  from tab1 a INNER JOIN tab2 b
  ON a.c1=b.c1 
  LEFT OUTER JOIN tab3 c
  ON b.c2=c.c2
  where ...
  group by
  ..

  I felt bad and it turned out to be the same. It returns no rows. Please help with the correct syntax.

  I'm not sure, sorry, because it's certainly the ANSI equivalent to the non-ANSI.

  Would you have examples of queries and data that you can reproduce the problem with, and that we could analyze?

  Published by: Seanmacgc on July 15, 2009 12:48

  If there is no Clause WHERE conditions in the original that are included in the ANSI version of the query in the WHERE Clause for the EXTERNAL table itself joined, then that could transform the JOIN JOIN internally, that is, all the filters on the EXTERNAL joined table should be included in the JOIN predicate - IT (b.c2 = c.2 AND c.c3 = 'X').

• How to organize a table like 'move with the text' and 'around and underneath "? For now, my only option in the menu drop-down is "in line with text.

  Hello. I am trying to format a table, so that when I hit it, it moves to the bottom of the page and the bumps any text underneath down as well (that is if you can see the whole table and all text at any time)

  .

  However, the only options I seem to have are moving with the text > inline with the text. The first part is what I want, but having the means of inline with the text of table than all text below it floats UNDER the table, and you can't read it.

  PIC 1 - My only option when "move with the text" is selected. As you can see all the other features are also grayed out.

  

  Photo 2 - I want now, select above and below, but when I select something other that in line with the text...

  

  PIC 3... it jumps to stay on the Page option is not what I want.

  

  Any ideas?

  You can have a floating table in v4.3 Pages ' 09 that moves before the text typed before it, but this feature has not been added to any release of v5 Pages. Simply set the table in the Wrap Pages ' 09 Inline with the text Inspector, and object causes the film if you wish.

• Firefox tells me to upgrade to 10.0.1, but also tells me that my AVG security does not work with the update. What should I do for security? I would jump up to date, but I already blocking problems, which always seems to happen if I don't update to the c

  I want to update, but does not lose the security I have and like you.

  A catch-22 here: updated to avoid blocking-time problems and lose my security, I'm uncomfortable with OR keep my AVG security and put up with the frustration of time hang "Mozilla does not.

  You're welcome, BamaGirl.

• Problem with the drive of Blue Ray on TouchSmart IQ810uk, HELP!

  Can someone out there help, my new touchsmart, which is compatible with the DvD Blue Ray is unable to read or play bule ray DvD, but has no problem when it comes to CD or DvD, it plays perfectly with no hickups, I tried up to from my firmware programs and BD ROM software for playback of the blue ray DVD , but no solutions. its been suggested that I do a oil change of power, upgrade to Windows 7 as windows media supports Blue Ray DVD, I did a complete restore of the system and the only thing I can think is to exchange the BD - Rom drive, but very puzzeled since I was able to read all other formats, I don't think it's a hard drive problems.

  MAY A CLUE THERE!

  Got my BD ROM drivechange and immediately resolve my blue ray player problem, so I suggest get Hp to replace your BD - Rom drive.

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• DNS problem with the fake IP on computer file discovered. Help

  installed a new Virus program (Kaspery switched to Norton) and impossible DNS verified or recognized.  When the IP address has finally found (ARIN) it was not related to my machine, but to another in another city, somewhere else.  How is that possible? -is that my spyprogramming is not able to clear a hijacking, a bot or a virus, or is there another explanation maybe the FBI cyber crime unit should enlighten us on? have you ever heard such a thing, a product of MS?

  Your message is in the forum for people needing help with the anti-malware program from Microsoft Security Essentials (MSE).

  Since your "glitch" appeared after having uninstalled Kaspersky and installed Norton, suggest that your question should be considered by the Norton Support.

  You could try: http://community.norton.com/

  You may also find useful information by reading the Kosh Vorlon response in the following thread: http://answers.microsoft.com/en-us/protect/forum/protect_scanning/identifying-computer-ip-addresses/0b3d14f6-979c-4053-a74b-845f2e8b0d15