A Dell Inspiron 531 computer will be compatible with Windows 7? Conflicting information between sources.

Similar Questions

• What to do if the computer is not compatible with windows 7

  I have a computer that has lost the ability to use Windows XP by notice on my screen.  When I ran to the compatibiliy Windows 7 audit, the computer is not being upgraded to be compatible with windows 7.  What are my options?  I can't get a new computer.  How can I make my Windows XP operating system works?

  To repeat one of my previous questions, what was the view of your receipt of no longer being able to use Windows XP?

  And what if you can recall, happened to the computer just before you started to have this opinion?

  Normally, except in the case of substantial changes to the hardware, once Windows XP has been activated - as it was to the company - she should stay enabled.

  If the computer is connected to the company network, there may be questions to use as a stand-alone computer (which can be fixed).  In addition, there is a body of thought that holds that any used computer should have re-installed Windows.  A computer company, however, is much less likely to have "bad things" about it as previously used by an individual.

  The reason that many new computers is coming with OS CD is that Microsoft gives the leading manufacturers (the so-called "Direct OEMS") the opportunity to provide a built-in method to restore the computer to its State 'cost-of-the-factory' rather than provide the CD of the OS.  See How to restore or reinstall Microsoft Windows on a Dell computer.

  It is possible, however, that the it Department of the company that has purchased the computer completely erased from the hard drive and loaded a company custom 'image' right under Windows XP and applications that the company wanted to have on its computers.  If this is the case, you can be out of luck unless you can go back to the COMPUTER service company and ask for their help.

  Finally, it is possible that you may be able to get a set of backup from Dell disks: http://support.dell.com/support/topics/global.aspx/support/dellcare/en/backupcd_form?c=us&l=en&s=gen&redirect=1

• When my HP 3070 will be compatible with Windows 8?

  When will my networkprinter of all-in-one HP 3070 be compatible with Windows 8?

  Hello scanwing,

  I recommend that you check out this document, bookmark it and check back often for updates on your device drivers.

  Printers supported for Windows 8

• A product that needs Windows XP SP3 + will be compatible with Windows 7 Home Premium

  I have Windows 7 Home Premium and I want to buy a product of heart Math that says Windows XP XP3 +.
  What I need to be upgraded or it would be compatible?

  Windows 7 has a feature of executing programs that are compatible with a previous version of Windows. If you have Windows 7, then you can run programs that are compatible with the following versions of Windows: -.

  1. Windows 95
  2. Windows 98/Windows Me
  3. Windows NT 4.0 (Service Pack 5)
  4. Windows 2000
  5. Windows XP (Service Pack 2)
  6. Windows XP (Service Pack 3)
  7. Windows Server 2003 (Service Pack 1)
  8. Windows Server 2008 (Service Pack 1)
  9. Windows Vista
  10. Windows Vista (Service Pack 1)
  11. Windows Vista (Service Pack 2)
  12. Windows 7 (obviously)

  In your case, you want to run a program that is compatible with Windows XP (Service Pack 3) , then I don't think there should be a problem to do so. Is there a programs on Windows 7 Compatibility Wizard, which helps you run programs that are compatible with a previous version of Windows. You can follow the following steps to run the program compatibility Wizard.

  1. Open the program compatibility Wizard by clicking the start , clicking Control Panel, clicking programs and then click on use an older program with this version of Windows.

  2. Follow the instructions in the wizard.

  If you are unable to install a program, insert the installation for the program and, using the wizard disk, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. The wizard is not designed to work on programs that have an .msi file name extension.

  To change compatibility settings manually for a program, right-click the program icon, click Properties, and then click the Compatibility tab.

• I just want to know if laptop HP Pavillion DV6 of my son will be compatible with Windows 7

  Had to replace the hard drive in the laptop for my son. It has a HP Pavillion DV6. We need to install a new operating system and want to go with Windows 7. It will be compatible?

  Run the Windows Upgrade Advisor
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Download and run the Windows 7 Upgrade Advisor to see if your PC is ready for Windows 7. It scans your hardware, devices, programs for known compatibility issues installed, you gives advice on how to fix any problems found and recommends what to do before upgrade you.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• WordPerfect 10, which works with Windows XP will be compatible with Windows 7?

  WordPerfect 10

  Hi Orionsnana,

  Welcome to Microsoft Vista answers Forum!

  Perfect10 Word is compatible with Win7.

  You can check the link for more information: http://www.corel.com/servlet/Satellite/us/en/Content/1254516325013

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a dell inspiron 531 which primer not or with the operating drive.

  The hard drive is good and I also replaced the motherboard.

  Started to reinstall windows vista with the disc and got right to the final step and got a message that says cannot complete the installation of windows. Windows was arrested at unepectedly.

  Now he does not even the startup disk.

  I tried to start in safe mode.

  Is it possible that I can erase everything on the computer and then reinstall every thing with the original diskettes?

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  Above is how recovery of Dell process is supposed to work.

  If you have changed the motherboard of Dell, you have problems.

  Dell recovery disks are related to their motherboards.

  Contact Dell.

  See you soon.

  Mick Murphy - Microsoft partner

• Dell AIO 810 printer will still work with Windows 8?

  Hello, I know that Dell said that do not have a driver for Dell AIO 810 printer? The question is if there is no work around to make it work or do I have to wait for a driver, or just buy a new?

  concerning

  Rizvolo,

  If you have installed Windows 8 and it is a Dell computer, have you installed the drivers in the correct order, Dell System Software (if applicable) and the first chipset drivers? How to download and install drivers in the correct order If it is not first a Dell computer, chipset drivers?

  If I'm not mistaken, it is an older printer and was made before Vista. Usually using the Vista drivers, if applicable can work. I also use the drivers XP 64-bit on some models.

  Download the drivers XP 64 - bit for the Dell 810 printer and follow the steps and install them on the drivers in XP SP3 compatibility mode.

  Run print jobs remove, restart your computer, disconnect the printer, run the patch (cleaning of printer utility), restart your computer. Make sure that the printer has been removed, install the drivers for XP 64 bit in XP SP3 compatibility mode. You should get invited to connect to the printer.

  Have you you get prompt enough to allow the printer after your anti-virus program? Enable the printer after Microsoft Essentials/Windows Defender

  Rick

• Computer will not start with Windows. I get a black screen and a blinking cursor.

  Windows XP Home Edition startup problem

  I have Windows XP Home Edition, but the computer does not start at the top.  I get a black screen and a blinking cursor.  I have an XP installation disc.  I was in the Recovery Console to recover all of the standard tasks, but nothing helped.

  Brand, model and model number of your PC?

  Are you able to get into the BIOS?
  What took place prior to this problem?
  For now, you can read this to get some ideas:
  http://tips4pc.com/computer-problems/my-computer-boots-up-to-a-black-screen-with-a-flashing-cursor.htm

• Will be my HP 6500 has more 710n be compatible with windows 8?

  I'm looking to see if this printer will be compatible with Windows 8, 64-bit professional.  Can someone help me?

  I hate that I have to buy a new printer.

  Thanking you in advance,

  Leila 1939

  Hello

  Yes, the printer will be fully compatible with Windows 8.

  Currently, there are basic drivers in the operating system that give to print and scan features.

  Full features software should be available no later than the release date of OS which is October 26.

  You can find this information below:

  http://support.HP.com/us-en/document/c03168175

  Best regards

  Shlomi

• My Photosmart of HP5510 printer is compatible with Windows 8.1

  Need to buy a new computer with the disappearance of Win XP... need to know if my Photosmart of HP 5510 printer will be compatible with Windows 8.1

  Hello Hafygirl

  I saw your question and want you to know that Yes, the Photosmart 5510 is compatible with Windows 8.1.

  Here is the link to download the driver for Win 8.1: HP Photosmart full feature and drivers software

  I hope that answers your question!

  Have a great Monday

• Microsoft Works is compatible with Windows 7?

  Microsoft Works word processor is my favorite word-processing program. It is not installed on the new computer with Windows 7 as its OS, I bought. If I buy Microsoft Works separately, it will be compatible with Windows 7?

  I'm using MS Works 2000 worms. 5.0 on my Win7 machine.  I also like works.

  Good luck.        AnnE in MN

• 5530 envy: Envy 5530 - Compatible with Windows 10?

  5530 - desire that it will be compatible with Windows 10?

  gw24 wrote:

  Thus, the existing W8.1 pilots, make it compatible with Windows 10?

  Hello

  On the track, HP may change a bit and publish as a pilot Windows 10. I do not have Windows 10 diver, I had to use the Windows 8.1 driver to test and it is COMPATIBLE.

  Kind regards.

• Photosmart D7560: photosmart D7560 compatible with windows 10: 00

  The Photosmart D7560 will be compatible with Windows 10?

  When the final version of Windows 10 is available, visit the HP web site for updated drivers.

  Remember, do not upgrade for Windows 10 for at least 6 months after the final version.

• quilt of old models compatible with windows 7

  We have the old software of couture, boss and duvet. Cannot find any info as to whether it will be compatible with Windows 7 or 8. Get a new laptop and have plenty of models. Help, please.

  Thank you

  Kathie

  For most cases, it will continue to operate perfectly.  However the best way to know is to contact the company that makes it.  Or if you have the name and the version number, you can search online.