A DIALOG BOX IS DISPLAYS IF I DOUBLE CLICK ON ANY OF THE FOLDER

Similar Questions

• How to open the Options dialog box to display the curves on the properties panel

  I can find the dialog box options display of curves when I opened the curves by the image > adjustments > curves but correction I do it is not about when to use the curves in the properties panel.  I prefer using the properties panel, but try as I might I can't find a way to access the curves Display Options there.  I need to go back to the 'light' button so that my shadow is in the lower left corner and highlights are in the upper right corner, and not vice versa, as they are now.

  You will find the Display Options of curves for the curves adjustment layer on the shortcut menu in the properties panel

  

• When I try to install Firefox... a dialog box is displayed (setup Wizard) saying "computer must be restarted to complete uninstallation of previous.» You want to restart? O/N"restarting has no effect! How do we install Firexox?

  I had already installed Firefox, but because of problems I uninstalled it to allow a new installation of the Firefox update... I constantly get the dialog box asking I reboot... and when I do the PC restarts but does not continue with the previous installation

  Follow the suggestions mentioned in the following article:

  • The program should allow close to a previous Setup attempt finish

  Check and tell if its working.

• When I try and download the free trial of CC for the sequels, the installer said 'double click to install', but the red box that I'm supposed to click does not show silent... what I do?

  When I try and download the free trial of CC for the sequels, the installer said 'double click to install', but the red box that I'm supposed to click does not show silent... what I do?

  Hello

  Please try to download the installer from the link below:

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

  Kind regards

  Sheena

• I'm trying to reduce the file size of a jpeg file, but the dialog box under image > image size reflects a much smaller that the file is. I saved the image after resampling and by reducing the size of the image, reduced the pip to 72 and lowered the qua

  I'm trying to reduce the file size of a jpeg file, but the dialog box under image > image size reflects a much smaller that the file is. I saved the image after resampling and simplistic image, the pip size reduced to 72 and lowered the low quality only to see the minimum file size reduction. Why the dialog box in photoshop gives me a different file size than my computer and how do I solve this problem? Thank you!

  The Image Size dialog box dialog box shows the uncompressed size.

  Your operating system (Explorer/Finder) shows the size compressed. (size on the disk)

  If you use save for Web, you can see the compressed size, but also an overview.

• Extremely frustrating mouse double click when you use the docking station?

  I have a mobile workstation 15 zbook and love it.  I have a docking station at work and even from one station to the House.

  When I plug the docking to the mouse House will be double-click whenever I have one click.  Simple click, I have to quickly move out of the object or it clicks double in each time.   I tried a new mouse, to reduce the speed of double click and is NOT the case on my docking station at work or when the laptop computer use with the mouse connected locally.

  It of extremely frustrating and makes working at home a pain rather than productive.

  You ask if anyone has seen elsewhere, or have any suggestions?

  Hello @romatlo,

  I read your post about how how your laptop will be double-click everything you click once when it is attached to your docking station, and I would be happy to guide you to a resolution!

  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do it:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/BD-p/BSC-274

  I hope this helps!

  Concerning

• Outlook Express - How can I keep email to open in the display pane when I click on it in the Inbox?

  How can I keep email to open in the display pane when I click on it in the Inbox?

  Turn off the preview pane. (View |) Page layout).

• By double clicking on any folder in XP, the search results page comes up

  When I double click on any folder, the SEARCH RESULTS page returns every time. How or what I do to solve this annoying problem?

  * original title - HELP!

  Hi BruceMuncy,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. do you have security software installed on the computer?

  See the Microsoft article below and check if it helps.

  If you double-click on a folder to search companion starts

  http://support.Microsoft.com/kb/321186

• to choose the simple click instead of double click for selection using the mouse is no longer seen in Win 7 Pro

  possibility to choose the simple click instead of double click for selection using the mouse is not seen more in Win 7 Pro.

  where you can select the option, please? Thank you

  Hello

  You do not tell us where you are looking for it.

  "Click or double-click to open an item".

  http://www.SevenForums.com/tutorials/10117-single-click-double-click-Open-item.html

  See you soon.

• I have and try to reinstall Photoshop CS5.1 on a Macbook Pro running El Capitan (OS10.11.2). I downloaded DesignStandard_CS5_LS1.dmg but when I double-click installation I get the message 'Install' is corrupted and cannot be opened. You must eject the dis

  I have and try to reinstall Photoshop CS5.1 on a Macbook Pro running El Capitan (OS10.11.2). I downloaded DesignStandard_CS5_LS1.dmg but when I double-click installation I get the message "'Install' is corrupted and cannot be opened. You must eject the disk image. "Someone knows what's going on? I tried to download with Safari and Firefox, but the same thing happens.

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but these two links will help with older programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303

• How script a dialog box to display information?

  Hello.

  I have a dialog box that contains 7 lines and 2 columns to display information as such script:

  

  How do I do that?

  Any help would be appreciated.

  ScriptUI has tables, plus you can get is to use a listbox control. Depending on the version of your application, the lines will be written or not but I don't think that you can control.

  var w = new Window("dialog", "test");
  var lb = w.add("listbox{properties: {multiselect: false, numberOfColumns: 2, columnWidths: [60,60], columnTitles: ['A', 'B'], showHeaders: false}}");
  for (var k=1; k<8; k++){
      lb.add("item", (5*k).toString()).subItems[0].text = (11*(k+1)).toString();
      };
  
  w.show();
  

  You can play with the properties of creation.

  For me, if showHeaders is set to true, the columnTitles are displayed and the columnWidths property are respected.

  But if it is false, the columnTitles are not (as one would expect), but the columnWidths property are not respected...

  Xavier

• PES 10 - print dialog box - preview displays incorrect file

  PES 10 - print dialog box - preview shows wrong file.  Preview displays an open file, but reduced, however, it does not show the file active, open I want to print.  Rather than having to go through the Organizer to choose the right file and delete the wrong file, how can I make sure that the target file that I want to print is displayed in the print preview dialog window and prints in fact?

  Click the file you want to print in the project bin to select before entering the print window.

• Could not open the dialog box of .msi files saying find a program to open the file type

  In time, I used msi files to install many programs. But I know longer really since then, msi files could not open. Now, I can't open the msi installer, which I had used to install programs. When I click on the msi file, it displays a dialog box saying find a program to open the file type.

  Hello

  1. Were there some recent changes to the computer before the show?

  Method 1: I suggest you unregister and re - register the windows setup program and check if that helps you. To do this, please follow the steps below:

  Unregister and register the Windows Setup program again

  (a) click Start, click run and then type cmd in the dialog box, and then click command prompt.

  (b) at the command prompt, type the following and press ENTER after each line:

  MSIExec /Unregister

  MSIExec/regserver

  Method 2: When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program.

  http://support.Microsoft.com/kb/950505/

  Method 3: Change default programs using Set Program Access and computer defaults:
  http://Windows.Microsoft.com/en-us/Windows7/change-default-programs-using-set-program-access-and-computer-defaults

  Changing the programs Windows uses by default: http://windows.microsoft.com/en-US/windows7/Change-which-programs-Windows-uses-by-default

  Hope this information is useful.

• Why do I get a blue box with double arrows when I open the folder photo and music of mu, it also appears with my documents.

  Nothing happens when I click on the box. It just the regular menu that opens

  Good news, there is nothing dangerous.  I looked online and Norton shows these icons.  To learn more about what the blue box by means of White arrows (>), and how to disable the option of Norton, you can visit this page:

  http://www.Winhelponline.com/blog/green-tick-or-blue-arrows-icon-overlay-displayed-for-files-in-Windows-Explorer/

• Adding a dialog box pop-up warning when you click the reset button

  Hello

  I would add a warning dialog to the "reset" button that appears when the user clicks on the button with a text saying something like "are you sure you want to reset the form?" before the form actually gets reset. The goal will be to help users avoid to reset the form on the accident. Any ideas would be appreciated, I'm a little in the age of darkness using LiveCycle Designer 7.0.7.

  Thank you

  S.

  Hello

  It should work in v7. Put it in the click event of the button reset.

  var nButton = app.alert({)
  CMSG: "WARNING: you are about to reset the form.» \n\nDo you want to continue? «,
  CTitre: "your title here"
  nIcon: 1, nType: 2
  });

  If (nButton is 4)
  {

  xfa.host.resetData ();

  }

  The script puts an app.alert before resetting. If the user, click Yes, and then the form is reset. If not, the form is not reset.

  Good luck

  Niall