Why vista Media Center does not recognize my card tuner Hauppauge 1850
I just install WinTV-HVR-1850, Manager of device States work properly, yet Media Center does not recognize the tuner... Keep received message "no tuner found" not could someone explain what I need to do.
Hello
I suggest that you install the latest driver and software from the Web site below and check if it works:
http://www.Hauppauge.com/site/support/support_hvr1800.html
Try to contact the hardware manufacturer for assistance.
Hope this helps,
Tags: Windows
Similar Questions
-
XP Media Center does not recognize the atsc tuner
Comes with a mistake to try to at least one device with ntsc tuner. I have an atsc/qam tuner.
Operating system System model Windows XP Media Center Edition Service Pack 3 (build 2600)
Install language: English (United States)
Local system: English (United States)Dell Dimension E521 Inc.
System Service tag: 1K6C6C1 (support for this PC)
Chassis serial number: 1K6C6C1
Case type: DesktopProcessor Main circuit 2.00 GHz Dual Core AMD Athlon 64 X 2
hides the central memory of 128 kilobytes
1024 kilobyte secondary memory cache
64-bit ready
Multi-core (2 total)
Not hyper-threadBoard: Dell Inc. 0CT A03 103
Serial number:... CN708216AQF10C.
The bus clock: 1000 MHz
BIOS: Dell Inc. 1.1.4 12/09/2006Readers Memory modules 349.53 GB drive hard usable capacity
292,35 gigabytes of free disk spaceHL-DT-ST DVD-ROM GDRH10N SCSI CdRom Device [scanner]
TSSTcorp DVD +-RW TS - H553A SCSI CdRom Device [scanner]WDC WD5000AAKS-00UU3A0 [hard drive] (500,11 GB) - drive 0, s/n WD-WCAYU6672846, rev 01.03B01, SMART location: healthy
3072 MB usable memory installed Slot machine 'DIMM_4' has 1024 MB (serial number E82397F1)
Slot machine 'DIMM_3' has 1024 MB (serial number E823981D)
Slot machine 'DIMM_2' has 512 MB (serial number F802488F)
Slot 'DIMM_1' has 512 MB (serial number F802485E)Hello
1. What is the brand and the model number of your TV tuner card?
2. is it compatible with Windows XP Media Center? She never worked properly on your computer?Method 1.
First of all I ask you to install the latest drivers for your manufacturer's Web site TV tuner card and check out them.Method 2.
Also, check out the methods listed in the articles below and check.
You receive an error message "No. Tuner available" when you try to watch TV Online after connecting a USB TV tuner to your computer Windows XP Media Center Edition 2005
http://support.Microsoft.com/kb/891108Update 1 for Windows XP Media Center Edition 2005
http://support.Microsoft.com/kb/873369I hope this helps.
-
Windows vista media center does not I can uninstall and reinstall?
Windows vista Media Center has been installed, but will not respond. How can I fix this problem?
Hello
You cannot uninstall or reinstall
Try this:
Run the sfc/scannow command.
http://support.Microsoft.com/kb/929833
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
- Type the following command and press ENTER:sfc/scannow
The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions
How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
http://support.Microsoft.com/kb/928228#appliesTo
If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation
read the below tutorial on how to perform a repair installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
-
Windows Media Center does not detect my TV tuner card
Hi a few years back, I built a Media center PC Windows Vista worked great! incredible experience recently (2 months ago) I formatted the PC and reinstalled Windows Vista now Media center options have changed and my Tuner card is not be detected BUT if I use the software the camer card it works fine I ca watching TV and recording with no problems
I've uninstalled and reinstalled the drivers twice and today I removed the card and inserted into a PCI slot new nope still does not (sigh)
PC is a core 2 duo with 2 GB ram Intel MOBO ATI 3600 seris of graphic card tuner Kworld is
I'm suspect that Microsoft updated Media center to stop my card work! or is it because I'm at the Canada and rules are different here and that's why multimedia does not work?
Hmmmmmm
appericate any help or advice thanks in advance
-Derrick
It seems that the tuner is no longer supported by MS, but thanks for the answer Vijay
-
Why Windows Media Center does not display tile of Internet TV?
Does not accept downloads
Hello, Packard37
You are in the US, UK or elsewhere?
Internet TV is available only in the United States and the United Kingdom - assuming that you are located in the United States / UK:
Check your region settings in Windows. Go to start > Control Panel > clock, language and region > region and language. On the location tab, make sure that the country is selected in the administration tab, make sure that the language is also correct as well, otherwise click the settings change system locale.
Go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. At the command prompt, run the following command and press ENTER: start/wait %windir%\ehome\mcupdate - uf-nogc
After you run this command, open Media Center and check if it is available, otherwise, you may need to reset the Media Center, note that this operation removes all custom settings and you will need to re-run the installation again:
Open the command prompt, as described above once again and then type the following command and press ENTER: MediaCenterRecoveryTask - %SystemRoot%\ehome\mcupdate.exe
One time only complete, open Media Center and run through the configuration. If you do not immediately see the Internet TV, let Media Center open for about 5-10 minutes, then restart and check if it is available or not.
David
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Vista Media Center does not display the subtitles TV
I just started to use Media Center to Vista Home Premium and I need help.
I googled but have not found my solution.Fortunately, my HDTV (Samsung) shows the legends on the captioned.
When I go the same path of VMC, I don't have captions.
Where is the 'button' to turn on / off?
It is a function of the tuner (digital tuner Hauppauge HVR-2200)?Thanks for your help, but I finally got the legends of work.
It seems that the solution is in the Windows Media Center TV Pack 2008 (x 86).
I was provided by my HTPC seller and applied the 2 patches that came with it.
The old system was WMC version: 6.0.6001.18000 (longhorn_rtm080118-1840).
After installation, the version is 6.1.1000.18273 (longhorn_mc_dev (wmbla). 080702-2208).Now my menus show the items people asked me access but was not when indicated.
It works with the same material: HTPC HDMI - HDMI-> receiver--> TV
In fact, the legend of WMC are much more clean and elegant than those of Samsung TV.
Is there a way of positioning, as their name suggests, under - titles?
They appear in the middle and slightly below the center of the screen, rather than the bottom of the screen.Kind regards
N
-
Why my Media Center does not connect to my digital TV?
I tried to connect my computer to various help television stations and cable S video but nothing happens. My last TV series is a digital and has the ability to receive video and input S for PC. What I am doing wrong?
Hi MarjorieLuhrs,
You can follow this article to configure the TV signal in Windows Media Center. (Also applies to Windows XP)
-
Why windows Media Center does not detect all channels digital antenna television
Detects only 2.1, 11.1, 13.1 ect willnot detect 2.3, 13.2, 14.4 etc..
HelloI suggest to add the missing digital TV station, to do this, follow these steps:In windows media Centera. on the start screen, access tasks, click settings, click TV, click Guide, and then strings missing Add.b. click Add a digital TV channel.c. type the name of the missing channel, and then click Next.d. Enter the number of the missing channel, and then click Next.e. If you are prompted, type the physical number of the missing channel, and then click Add.f. click done.See the link below for more informationSet up the Guide listings for use in Windows Media Center
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-Guide-listings-for-use-in-Windows-Media-CenterInformation with dubbing
TV signals that are supported by Windows Media Center: http://windows.microsoft.com/en-us/windows-vista/TV-signals-that-are-supported-by-Windows-Media-Center
Set up a TV signal in Windows Media Center: http://windows.microsoft.com/en-us/windows-vista/Set-up-a-TV-signal-in-Windows-Media-Center
TV on your computer: understanding and TV tuners TV signals: http://windows.microsoft.com/en-us/windows-vista/TV-on-your-computer-Understanding-TV-signals-and-TV-tunersAziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Vista Media center does not start
From the start, I get the warning box that Media center has stopped working. It says Windows will close the program and notify me if a solution is available. When I close the program - banner in the blue windows media center remains here and begins to the microsoft update page. I go through the update page, and it says that my system is up to date and working correctly.
I received a rundll error message and did a fact a reg clean. It always does the same thing: what I can try next?
Hello rspenyvr,
If you create a new user, you have the same problem with the newly created user account? I found in other posts that somehow the user account is corrupted and will help create a new account to correct the problem.
Answer please come back and let us know.
Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Media center does not recognize the unencrypted HD channels
I'm trying to record live TV of TV that gets its strings by simply using the power (without decoder) coaxial cable. When I set up WMC, choosing the selection of regular (analog) cable packages it offers, I get all my channels except 5 or 6 unencrypted HD channels that offers my firmware. What are the channels that appear on my TV as fractional as channels 116.2, 117.2, etc.. I really want to record these HD channels. Is it possible to add them manually to the WMC?
Hello MtnGoat,
Thank you for visiting the Microsoft Answers site.
You can check that the card TV tuner and model is a compatible TV tuner of QAM.
In addition, you can check if you are able to view the unencrypted channels when the cable is connected directly to the TV.
Here is a useful link which includes information on taken TV signals supported by Windows Media Center:
http://Windows.Microsoft.com/en-us/Windows7/TV-signals-that-are-supported-by-Windows-Media-Center
For further assistance, you can also post the question to the following Microsoft Web http://thegreenbutton.com/ Windows Media Center Community site.
I hope this information is useful.
Thank you
Mary
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows Media Center does not recognize an Entone Hydra box/remote control cable
I'm putting in place the WMC to work with my cable box Entone. It's not satellite, this is the area used by CCC Southslope in Eastern Iowa. There is no section Entone for activation of the box, automatic remote recognition does not take into account. When I try to teach my cable remote codes manually it will "key to continue" but never moves from the teaching of the 1 button for button 2. I am sure that the IR receiver works and is properly plugged in, and that the batteries in the remote are fresh.
Make sure the distance between the IR receiver and the remote control is quite close, there are no obstacles between the two and the whole set up is not under the direct fluorescent light.
I'm going to suggest you go through the following article: -.
How to use the functionality of Microsoft MCE Remote control learning
-
Why Lightroom 3.3 does not recognize SD card?
I use LR3.3 with Vista 64 bit. Again S95 camera, new Lexar 16 GB SDHC card. LR do not. I can't import pix. (I have not had a problem of import with another camera or card SD or CF.) Ideas?
I would try first with a different card reader/cable/port. In addition, do not use a USB hub. Have you tried to connect your camera directly instead of using a card reader (even if we generally recommend the opposite...)?
Beat
-
Windows media player does not recognize my hard drive
Windows media player
Why Windows media player does not recognize my hard drive
Hello
1 are there any changes or updates made on the computer?
2. do you get an error message? If Yes, what is the full and exact error message?
I suggest to see the links and check if it helps:
The problems of the CDs or DVDs
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-CDs-or-DVDs
-
Problem with wireless - Vista Network and Sharing Center does not recognize my connection!
I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.
Hello
Method 1:
Windows wireless and wired network connection problems
Method 2:
You can also view the related items for more information.
The problems of Internet connectionhttp://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Solve problems, find wireless networks
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
Method 3:
Setting up a wireless network
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network
Wireless network card: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions
See also:
Connect to a network with Windows Vista wireless
-
Windows Media Center does not work on both my XP and Vista computer. The two events lastnight
Windows Media Center does not work on both my XP and Vista computer. The two events lastnight
Hello
For someone to really help him, it is important to give as much information as possible.
You say "my computer XP and Vista" are this one computer dual boot with XP and Vista, or is - the two computers 'single '?
If it happened "yesterday" did you updated anything or whatever installed?
Having only happened yesterday have you tried a "System Restore" to see if this corrects the problem?
What TV card are you using and have you verified that this works correctly?
If you get not a photo is the antenna in place properly?
Do you get any error messages? More information, you can provide more someone will be able to help John Barnett MVP: Associate Expert Windows XP: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ;
Maybe you are looking for
-
Satellite Pro U300: the cursor of the touchpad does not respond
Cursor does not respond
-
Re: Satellite C660-115 very strange problems Wifi!
I've been busy with a problem on a C660-115 wireless, always without success. Satellite C660-115Windows 7 - 64 bit The case:-Laptop is connected to the power supply: Wifi works fine, no problem-Laptop power supply disconnected: Wifi does not work, al
-
close the reference on "read text file" - Ref num vs prefer class conflicts
Dear users, Vi Analyzer asks me to close the refernce created by VI "read text file". So, I would close a refnum created by primitive VI "read text file". I used a direct wire, wiring by top and bottom of the casting, but each of them attend class co
-
Try to install age of empires II, freezes at "control panel update" box.
I tried everything to fix this. The whole installation is going well until it gets to 100% and then says: "updating system settings" indefinitely. I tried it in compatibility mode for XP and windows 98. I tried as admin, Ive done the clean boot upwar
-
I have problem with the network... drivers my OS Win XP Pro - SP3 n one have "sign of hardware problem" in my device manager (with big yellow sign "?") -Broadcom 2070 Bluetooth -Network controller I use the driver from: http://h10025.www1.hp.com/ewfr