A few questions about VMware Flash Read Cache (vFRC)

Similar Questions

• A few questions about vmware products

  Hey all, first of I don't know where to post this question sorry if it's in the wrong place.

  Right away

  I was after some input on what product vmware, I need

  That's what I want to do

  I want my pc "windows" to run a debian in a virtual machine

  I need it to start when my pc's and it is always on such that it will run a few static websites

  Is this possible? If so what would I need to VMware?

  weinstein5 and Gkeerthy

  VMware player is the way to go to be able to be presented.

  Since this is probably a stay far from esxi office

• A few questions about VMware tools and U2 of ESXi 4.0 and 4.1

  In my workplace, there is a cluster of vSphere 4 six nodes containing 5 servers ESXi 4.0 U2 (4.0.0, 261974) and a server ESXi 4.1 (4.1.0, 260247).  Aparently, it was built that way in the environment concept then deployed into production and now I head for VMware deployment.  This environment is up in producgtion now for over 8 months with this configuration, but starting to be more widely used.  Ideally, I know, we should have all the nodes on the same patch level, but here's the question.

  Models used to get the operating system to the virtual machines in this environment were built on the apparently new 4.1 server using this version of VMware tools (Version 8.3.2 build-257859).  All so most of the running virtual machines, use this version of VMware tools.  Using this new version of VMware tools on a virtual machine running on a server ESXi 4.0 U2 ESXi would cause issues?  ESXi 4.0 U2 servers push version 4.0.0 build 261974 of the VMware tools, identical to the ESXi version.  The status of the VMware tools when the new 4.1 version is running on a host of U2 4.0 still shows as OK and we have operated this way for more than 8 months.

  Another problem is that we have still a few other virtual machines with the 4.0 build U2 VMware tools so when these virtual machines will eventually be VMotioned to an ESXi 4.1 host, VMware tools show as outdated.

  Until we can get of planned downtime to upgrade the servers, it should be like that for several weeks if possible.  We have HL7 interfaces on many of these virtual machines that are not too good with VMotion and being in an organization of health care, sometimes difficult to get downtime.  It is perhaps more possible to downgrade the only host to 4.0 U2 until we can plan time to upgrade all hosts.  I would keep the node in the cluster, even if for the moment, assuming that to release 4.1 with other guests at 4.0 U2 should not cause problems, since we can use the resources of that node in this cluster.

  Until then, ensuring that all the virtual machines in the cluster use the ESXi version 4.1 of the VMware tools (Version 8.3.2 build-257859) would be acceptable?  I just wanted to check that this version should be fully backwards compatible with the previous version of ESXi 4.0 U2, and as I mentioned before, its run like that and have noticed yet all the problems and the status of the VMware Tools also records OK when this new version works on ESXi 4.0 U2 host computer.  I just wanted some feedback from those of the community.

  Thank you

  Exactly, do you VMotion, virtual host 4.1 machine and if necessary would upgrade the VMware tools. To install VMware tools, it is necessary to restart the virtual machine.

  And another option that I say is the first upgraded version of all hosts ESXi4.0 U2 to 4.1, after that, you do an upgrade in the tools of all virtual machines vmware.

  Perfect.

  You´re are welcome!

• A few questions about VMWare HA

  Hello everyone,

  I would like to tell you my ideas on VMWare HA.

  I have two ESX servers. Each of them, I have:

  • vSwicth0 (vmnic1 + vmnic 3):

  • The VM network

  • Service console

  • vSwicth1 (vmnic0 + vmnic 2):

  • VMotion VMkernel

  • NetApp VMkernel (iSCSI storage)

  • NetApp Console service

  When I stop one of the two servers, powered on virtual machines migrate to another.

  I read on vmware documentation for VMWare HA, there are two cases:

  • failure (for example, stop the server)

  • response of isolation (Console of Service not responding)

  I tried to follow all the recommendations of VMWare by adding another Console of dedicated Service for HA on a different subnet, but I failed to run the response of isolation procedure.

  I see my virtual machines 'disconnected' and I can't turn them off as I have it configured in HA.

  I would like to virtual machines to migrate when vmnic1 or vmnic0 + vmnic 3, vmnic 2 is declining. Is this possible?

  If so, is there something that I misunderstood on HA or a mistake in my setup?

  Thanks in advance.

  Hello

  Since you have with a SC vSwitch0 and vSwitch1 with a SC, both will be down for things to be isolated. It's not one or the other, but both. You can assign up to have one, but don't not one or the other, one or both.

  Best regards, Edward L. Haletky VMware communities user moderator, VMware vExpert 2009
  "Now available on Rough Cuts: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• Questions about vmware high availability

  Dear all,

  I am new in this area, we intend to deploy vmware 5 in our environment by using the HA, I am a student in this regard. I have a few questions about this, I need assistance by experts in this field:

  -J' read the vmware network redundancy is strongly recommended for the configuration of vmware HA, but I haven't fully?

  -When vmware HA is configured and there are two hosts in the cluster, now when creating a new machine virtual, I need to specify under which host this new virtual machine must reside OR the HA feature will automatically decide on that?

  -When vmware HA is set up and I have two hosts in cluster, a host processors 4physical and 8 GB of RAM, the other host is also even have 4 physical processors and 8 GB of RAM, so for me which are the sets of resources will be presented? I will be display individually for each host resources when you create a new virtual machine, OR I will be presented with a SUM of resources 1 + 2 host resources to play?

  -Is it possible that I assigned 4 vCPU virtual machine and 4 GB Mem and it uses little resources from host 1 and few resources to host 2, as 2 vCPU to host 1 and 2 GB and still host 2vCPU 2 and remains 2GB (given that I am presented with the SUM of the cluster as mentioned in my second question resources)

  -J' read operating system failure when in vmHA particular VM will be restarted on the same host it resides, that means? If the BONE broke down, then when new virtual machine starts, it will be also having fallen copy of OS? I mean how this new machine will be launched, it's a copy identical secondary virtual machine crashed?

  Waiting for your help.

  Kind regards
  Jocelyn

  OK, consider cases that I am only using HA and no DRS, in this case I need to specify under what host to run VM?

  I read the first question again, then please, let me make this clear. When you create a new virtual machine, you must always specify a host and storage.

  Initial investment (when you are powering on a virtual machine) is a feature of the Drs without DRS a virtual machine can only be migrated to another host manually or with the virtual machine shut down (cold migration) or using vMotion (if allowed).

  But because of an event leading to the crash of the OS reboot also not solve the problem, correct me if I understood? This is also true for FT?

  You're right, HA can restart only a virtual machine. If there is a serious issue that causes the BONE invited to plant that regularly, this is not enough and you have to solve the problem manually. FT cannot resolve as she makes it "mirrors" the guest to another host, so it will also reflect a BSOD.

  Yes, FT has still some limitations. However, there are use cases where availability is important and FT is designed to ensure continuous availability in the event of a crash the host.

  André

• Hello Mr President! I have a few questions about the Word report generation please.1.How can I add a border to a page in word? 2. How can I add gridlines to a table generated related word?. Can 3. how I add a border to a picture of the Word report?. Thank

  Hello!

  Sir, I have a few questions about generating word reports using (C language in labwindows) please.

  1. How can I add a border to a page in word?

  2. How do I add border lines and grid to a table generated in Word report (not "cvi control table"inserted from gui, I wonder about the table generated in Word report)?

  3. How can I fill a table cell of report word with the data type other than 'character '.

  And sir a question on the use of the timer in labwindows cvi please.

  Sir, I'm trying to set a time minimum interval timer to 1millisecond (0.001 s), that I have set, timer cares about the interval set by me he only meets the minimum default time interval which is, I think as 10milliseconds (I'm using windows xp service Pack 3 version 2002).

  Concerning

  Imran

  Pakistan

  Have you read this statement ? It explains how to set the registry value:

  If the REG_SZ useDefaultTimer does not already exist, you must create it under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\CVI Run-Time Engine\cvirte. "" This can be done navigate to the appropriate folder, and then click Edit "New" string value. Then, click on means the name of the new value created, select Rename, and then specify useDefaultTimer as the name. Finally, double click on the name and specify the value True or False.

• Flash Read Cache

  Hi, we move to ESXi v5.5 and currently have for most blades IBM HS22/23 servers.

  I would like to understand what is Flash reading comes back and use. During the review of the current literature, I do not understand what it is and what materials it applies. Can someone just explain frowhat type of material, she applies and benefits (without URL to docs)

  Thank you

  The long and short of it is Vmware puts another piece on the hypervisor requesting your VM I/O buffers SSDS Rapids or flash cards for faster reads/writes of your San.  An easy way to think of this is that if you have already configured a disk to disk-to-tape configuration.  Dump you everything on the drive first for speed (several jobs at the same time, writing more Rapids, ect, ect), then send it to tape.  Its kind of the same idea with Flash Read Cache.  e/s of the VMDK is buffered or sent to the flash cache and sent to the San to increase performance.

  Page 6 of this pdf wmare has a good diagram of it:

  http://www.VMware.com/files/PDF/vSphere_55_Flash_Read_Cache_Whats_New_WP.PDF

  Hope this helps

• a few questions about the migration of content/web content

  Hi all
  
  
  I have a few questions about the migration of the website and content (from development to test) which are not specified after reading the oracle documentation.
  
  -> When we make the site replication will be migrated content (data files).
  
  -> when we move will contained all the ED and RD etc (any object type web site migrated).
  
  --> are the two the necessary step for migration when we migrate web site.
  
  
  Thank you
  
  -Yves

  --> When we make the site replication of the content will be migrated (data files).

  It depends on how you do it. The tool 'Site Studio Replicator' won't move any content, only the structure of the site. The 'Manage replication Site' page can be used to migrate content with the structure of the site but I do not recommend for large sites, I use separate tasks to archive to move the content. "Backup and restore" page stores the entire site in a ZIP file, not advisable for large sites.

  --> When migrate us content will be all ED and RD etc (any object type web site migrated).

  Yes. It uses the metadata xWebsites field to identify the elements that belong to the site.

  --> are the two the necessary step for migration when we migrate web site.

  Depends on how you do it, but yes, all bits are needed.

• A few Questions about the advanced Actions window

  Hello

  I have a few questions about the progress of the Actions (using the version of track CP7)

  1. What is the function of the action to "continue?"   Out of the peak action and advance the playback cursor?

  2. What does mean this comment "Nested calls to action advanced is a nice improvement."? Is the advanced decision at the top of a page of action tabs?

  3. What is the function of the option "custom" in the IF statement - "preform action if - custom", it doesn't seem to do anything for me?

  4. where can I get information about the timeline / playhead interaction with advanced actions, i.e. where the playhead is going again at the beginning of the slide. slide custom question - display button, e.g. verification of responses, comments - when all the objects are at the beginning of the timeline. I'm looking more for the read head of infromation functionality rather than how to implement this type of question.

  Thank you

  Donal.

  Continue: If an advanced standard action is triggered by a button, this will not trigger the playback head. If you want out, you can use continues. Continue can also be a choice in a conditional action, when one orders branching has nothing to special, but in advance. Continuous is also the "dummy" statement/command (this is the official name of a line in the dialog box advanced actions) If a statement has become unusable due to some reasons, it will be replaced by continue

  There is no nested call stocks advanced possible right now, one of my many feature requests. It would be sort of a subroutine that you can use over and over again, instead of having to create each time when necessary.

  A decision is one of the conditions to be an advanced conditional action. They allow to create more complex actions, as a loop or arrays are not possible. All decisions are executed in sequence and always.

  Custom: is a combination of or but it is rather limited, because you cannot use parentheses.

  I guess you'd better visit my blog if you want to learn more about the advanced actions.

  http://blog.lilybiri.com/

  I also did several Webinars on stocks advanced, last this afternoon (on the sharing of the actions) for Adobe. They are all available on request.

  Lilybiri

• A few questions about integration between POET and EBS

  Hi you
  I am a new bie BIEE. In those days, have a look at the POET architecture and BIEE components. In the next project, there is some work on the development of POET based on request of the EBS. I have a few questions about integration:
  
  (1) generally, the POET application and database server is decentralized with application and database EBS? Both BIEE 10g and 11g version can be integrated with EBS R12?
  
  (2) in the POET administration tool, the first step is to create arrays of physics. If the source application is EBS, is it still necessary to create the physical tables?
  
  (3) if the physical creation of tables is needed, how to transfer data from the source of BSE BIEE physical tables tables? What ETL tool is preferred for most of developers? generator for warehouse or Oracle data integration?
  
  (4) during the data transfer phase, there are many many large data to transfer, how to keep the entire? for example, it must transfer 1 million lines of source to physical tables BIEE database, when 50% is completed, users try to open the POET report, they can see the new data of 50% on the reports? is there some transaction in phase control ETL?
  
  could someone give some pointers for me? I am very appreciated if you can also provide any other information.
  
  Thanks in advance.

  (1) generally, the POET application and database server is decentralized with application and database EBS? Both BIEE 10g and 11g version can be integrated with EBS R12?

  You shud look at OBI request here that uses OBIEE as a tool for reporting with pre-built modules. 10g & 11g comes with different versions of the applications of BI that supports sources such as Siebel CRM, EBS, Peoplesoft, JD Edwards, etc...

  (2) in the POET administration tool, the first step is to create arrays of physics. If the source application is EBS, is it still necessary to create the physical tables?

  His independent of any source. It comes to OBIEE modeling to create the RPD with all the layers. If you build from scratch, then you will need to create all layers else if BI Apps is used so you can get pre-built RPD and other pre-designed components.

  (3) if the physical creation of tables is needed, how to transfer data from the source of BSE BIEE physical tables tables? What ETL tool is preferred for most of developers? generator for warehouse or Oracle data integration?

  BI apps comes with ETL pre-built mapping to use with the tools majorly with Informatica. Only applications BI 7.9.5.2 comes with ODI, but oracle has the intention of having only ODI for any other versions.

  (4) during the data transfer phase, there are many many large data to transfer, how to keep the entire? for example, it must transfer 1 million lines of source to physical tables BIEE database, when 50% is completed, users try to open the POET report, they can see the new data of 50% on the reports? is there some transaction in phase control ETL?

  User will see still old data because its good enable Cache and serving it after each load.

  See http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html...
  and a lot more docs on google

  Hope this helps

• A few Questions about the creative cloud

  I read that the Creator Cloud connection will be released in the coming weeks, which is great. I have a few questions about the download file and the creative connection program of cloud.

  I have a file which I will download. The contents of this file will be updated periodically locally. I want to do the files in this folder to stay updated between my desktop and laptop. The Creative Cloud connection program will be able to do?

  If a file is changed, which is already in the cloud program will recognize the change and stay the cloud?

  I guess just a little more information on exactly what will be the program Creative Connection cloud would be nice.

  On the topic of storage I will be able to upgrade the standard 20 GB of storage that is available when / if needed? And how much will that be?

  Another question:

  When Lightroom 4 will be available via CC and why is it not available when it was released?

  Creative Cloud connection will keep files between your desktop and the Web site synchronized. You will be able to add, edit and delete files from each end and that the changes are reflected in both.

  To see the connection creative cloud in action, you can watch this video of evangelist Paul Trani Adobe http://tv.adobe.com/watch/adobe-creative-suite-6-creative-cloud-launch-week/adobe-creative - cloud - tour-/.

  There will be a way to get more than 20 GB of storage. Adobe Creative Cloud http://www.adobe.com/products/creativecloud/faq.html FAQ has a question and an answer about it down:

  Buy extra creative Cloud storage?

  Additional storage will be available for purchase later in 2012. If you have reached your storage limit, contact Adobe Customer Service.

  Lightroom 4 will be available in a few weeks. Jeff Veen also tweeted this https://twitter.com/#! / veen/status/200810541550288896. Other Articles of Jeff on what comes to the Adobe Creative cloud here in his blog of Adobe http://blogs.adobe.com/creativecloud/coming-soon-to-creative-cloud/.

• A few questions about the making of the animated for a site Web Nav buttons

  Hello, I have a few questions about creating some animated for a NAV buttons.

  There are 2 actions I want to trigger on pouting above.

  If I want to use a static (PNG) image I created in Photoshop for the real button, can I use that? I want well drag the button down on the passage of the mouse and drag upward on the mouse. If I push the part of the "Web" button (sorry, that it comes from a Photoshop guy) it will disappear in the final animation? Another way to say this, if I put something lively off the coast of the white area, it no longer appears in the movie (.swf) when it is published?

  For the second part. You can see a bit of what I want to do if you look high Nav of the page of the website: http://www.photoshopsupport.com/index.html

  I need the 'light' above the button and it's going to be on another < div > color so I can't put a solid color of BG for my flash document. But I want to get the effect of the 'bar' lighting up above the button and the real key slide downwards to pouting on.

  You can provide any help would be greatly appreciated.

  We target the dynamicaly graph. Since the MouseEvent is now on the invisible sprite and not the graph itself, the one-for-all function has no reference to this graph. You can access the invisible sprite with event.target (or event.currentTarget), you can also target the chart because we declared "mygraphic" custom property to serve as a reference for the graphic. Thus, event.target.mygraphic is the benchmark for graphics.

  Of course, this is just an example. There are other variations of this trick.

  ____________________

  Design Cyboide

  Web site creation

• Satellite L650-11R - a few questions about this

  Hello there :-)

  I have a few questions about my new L650.

  I've never had Toshiba notebook before so I apologize if some of these "quirks" are actually quite normal on this laptop. I really want to hear the views of other users L650.

  1)
  First of all, by the time I turned it on I saw gradient thin (1-2 mm) along the right edge of the screen that goes from the bottom up. Maybe "degraded" isn't the right word, but it seems that since two or three pixels are kind of discoloration or lose brightness/sharpness to the edge along the straight bezel. It is not really that visible, looks like the colors are desaturated a bit here or brightness is a bit lacking. He can be seen everywhere (bios or no color in Windows, but better in the lighter background).
  The left side (or other) seems ok, all this along the right edge is somewhat suspicious. If one can compare? I don't know if it's something to worry about or is just supposed to be like that.

  2)
  The other thing I noticed heating of the processor (Intel i3 330M) and GPU (ATi Mobility Radeon 5650). It's pretty hot here right now (I would say that the temperature is around 28 degrees Celsius when using cell phones). He is sitting on the hard surface (table) and nothing is blocking the vents.
  However, at "rest" (surf the web & regular light stuff), average CPU temp hovers around 58 ° C. It usually goes from 45 to 62 in just a few minutes after starting, and then I can hear and see (Toshiba PC Health Monitor) evacuate the kicks in. Temp goes back to 50 +, event stops and then the temp rises to 60 + until the vent is used again.
  During load full (Prime95 or some games), CPU is going all the way up to 75 degrees (the highest being 77). Fan runs at 75 to 77% during this time, never go faster.

  GPU idling is usually around 5 degrees above temp CPU (62-65). During full load (for example. Benchmark of Far Cry 2), I see a lot of stuttering with the latest drivers Catalyst and DX10 (not sure if the stuttering has something to do with heat), otherwise it is ok (no artifacts or anything like that). Temp of GPU during the loading goes up to 74-75, fan speed is locked at 30%, the frequency of the heart 5650 is 450 MHz. left side of the laptop (vent and below) is pretty hot, while the keyboard is warm (or slightly warmer who who).

  These time seems correct and safe in the long term? I'd rather events works all the time (they aren't really very strong) and keeping time less than 50, but there are just wishful pious bios control events and I can't control not the bios. :-)

  3)
  This is just General related products. :-)
  Official specifications of Toshiba L650 say ATi 5650 (between other low range GPU), but I saw a few specifications calling for there 5730 (same model 11R). Is there really a Satellite L650 with ATi 5730 GPU models?

  Sorry for the long post, I tried to include the best possible description that I could do. :-)

  Thank you in advance.

  Thanks for the additional info!

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• A few questions about Toshiab reocvery disk for Satellite P300-133

  Hello guys,.
  I had a few questions about unpleasant surprises of recovery:

  (* 1) * I just make recovery DVD using Toshiba Recovery Disk Creator and he asked initially for 2 DVDs - but when one has been done it does not require a second blank DVD. Is it possible all the Windows Vista system files to write on 1 DVD?

  (* 2) * if I could reinstall Windows Vista using recovery of HARD drive option (by pressing F8) without using the recovery DVD?

  (* 3) * HARD drive partitions that will be formatted (just system C: or C: and E :) using HARD drive recovery?

  (* 4) * what is DVD - Image of the hard drives or the installation of Vista recovery files?

  Its pretty bad idea to not include BONES on DVD when I paid for it.
  Thanks for all the Toshiba problems :(

  1. I think the recovery disk creator means 2 CDs. I also have a Portege M700 with Windows Vista and a DVD. I got it and after that, I have a clean install of Vista with all the drivers and tools of Toshiba. Nothing is missing.

  2. Yes, you can reinstall Vista using recovery of HARD drive option when you press F8 at startup. You don't need the recovery DVDs, but you should create a when your HARD drive get some errors or something else. If you need a new recovery DVDs, you paid for one.

  3 HARD drive and complete partitions will be formatted, so backup your data first on a DVD disk external DRIVE, USB stick or something else.
  After the reinstallation, you have factory settings.

  4. the recovery DVDs is an image of the HARD disk on the factory settings. If you perform a recovery, there are all the drivers and tools are already installed. Of course, on the disk are files of installations of Vista, but you can use this DVD on your Satellite P300. The disc cannot be used on another Satellite or on a PC.

  If you have any other questions, take a look in the user manual. There are a number in the formations of the recovery. It s in Chapter 3.