A few questions of workflow of the Warp stabilizer

Similar Questions

• A few questions before you buy the Toshiba Qosmio G40 - 12J

  Hello

  I would buy a Toshiba Qosmio G40 - 12J and I have a few questions:

  -There's a Bios / disk HARD Tatoo that block the other installation of the system?
  -Is an original supplied Vista DVD Installation or reinstallation is made with a hidden partition on the hard drive?
  -If a Master Installation of the Vista DVD is provided, is an additional driver / software cd also delivered?
  -I can delete partitions and recreate them as I want, or is there a problem (because of a Bios / HARD tato or hidden partition HDD disk)?

  Thanks for your answers,

  Good day!

  lightchpa

  My dear, I had a G40-108 and now I work very well with G45-AV690.
  You can install XP... Linux and so forth, but don't forget to find the right driver (Nvidia and so on...)
  The recovery DVD is not only the Vista operating system, but there is the operating system with all software and tool too.
  You can create and delete any partition you want to

• Where the Warp stabilizer?

  I reviewed the after effects forum and found references to "stabilizing Warp.  The video that I found said it is an effect in the warp group - but I can't.  I updated my 10.0.2.4 æ

  Any ideas?

  CJ

  Stabilizer chain isn't available in CS5.5, cs5. You must purchase the upgrade.

  Mylenium

• Questions of workflow with the AVCHD video

  I copied the entire contents of an SDHC card which was shot with an AVCHD camera to a folder on my desktop. I just use the media browser in CS6 to double-click files to view. I just Final Cut Pro where I had to convert all these Pro Res 422 files before you can edit them.

  1. simply leave the contents of this file, as it is? I have to do something for the files before changing them? So if I start to edit clips from this map after their opening in the media browser and assemble clips in my calendar and then export it, is that all I have to do?

  2. If Yes, number 1, then after every shoot I would simply copy the entire contents of a card in a folder on my hard drive and just leave it there until I'm readt to change it, and after that I changed the folder structure and the content of the map remain the same?

  Thank you.

  This may cause problems with the rest of the contents of the card to work?

  If you do not erase?  No, this is why not to delete is recommended.  Keep the complete folder structure intact, with all content intact.

• Try to get the value of the Warp stabilizer

  Hi all!

  I want to write a script that can get the value "Auto scale" of all stabilized footages and, depending on the number, won't change the color of the film (layer).

  "Auto scale" isn't keyframable effect, so I'm stuck on how to get its value.

  

  Thank you in advance!

  If you are after the percentage number, this will help you. It assumes that your layer of stabilized is 1 of the model activates:

  {

  var app.project.activeItem = myComp;

  myLayer = myComp.layer var (1);

  var myEffect = myLayer.property("Effects").property ("stabilizer Warp");

  var MyName = myEffect.property("ADBE_SubspaceStabilizer-0017").name;

  var numIdx = myName.indexOf ("("); ")

  If (numIdx >-1) {}

  var myPct = parseFloat (myName.substr (numIdx + 1));

  Alert (myPct);

  } else {}

  Alert ("no percentage found.");

  }

  }

  Dan

• A few questions on Qosmio G30-175

  I am very satisfied of this laptop who purchased at a reduced price when upgraded all hard drives (2 x 80 GB is plenty for me).

  A few questions.

  1. the antenna (not the SCART) seems to be a little loose at the back. I had not noticed this before, has it become loose or is it some slack to allow easy access?

  2 with the system restore. Something I used to do often on my old satellite. It's easy with the G30 i.e ghosts in quite complete set?

  3. what tips are there for this particular model on Vista? Ive read on the problems of raid and so on for other people, I was wondering if someone had done and shares their experience

  Sorry for the many questions, but I have lurked long enough! ;)

  AHS

  (1) has not noticed any loose on the antenna to the computer plug phone back.
  But in my opinion if it has no negative influence on the quality of TV or picture then you can life with that. If this is not the case, make a call to the technician. He should take a look at this Jack.

  (2) the Windows XP System Restore tool is a useful application if you want to restore the starting point of you OS. I use it several times

  (3) Please check this forum category. You will find a few discussions on Vista and RAID on the Qosmio laptop

• Question about vMAC on the DLR LIF

  Hello

  Based on the design of NSX Guide: "every LIF has assigned an IP address, which represents the default IP for the logical segment L2 bridge, it connects to a vMAC address. The IP address is obviously unique by LIF, then that same VMAC is attributed to all LIF defined"

  This test in the HOL laboratories, I started a ping from 172.16.10.11-> 172.16.20.11.  I configured a mirror port with source such as app-sr-01 a (172.16.20.11) (not available on servers web/app HOL tcpdump!). Looking at the MAC addresses on the package 'in' GRE encapsulated packet (see below cliché) I have a few questions:

  1. whence the source MAC on the 00:50:56:f1:f7:a2 of ICMP request packets? What cli command would show this MAC address?

  2. If each LIF must have the same vMAC, "arp - a" output on the corresponding servers shows different MACs for 10.1 and 20.1 LIF.  Is this expected or a Nested lab thing or did I miss something?

  

  1 MAC SRC in the query is almost certainly a pMAC for the ESXi server where the web-sv-01 has. You should be able to see in "net-vdr - C-l" running on this host.

  2. "arp - a" output for your web-sv-01 a don't look right, you should see VMAC (02:50:56:56:44:52) for all DLR LIF. What version of NSX do you use?

• Warp stabilizer function

  1. I use the Warp stabilizer that works well for the small movement.  When I visited the effect, the red line in the time line turns green. However, after I save the project, and then reopen, the red line reappears again only when I use the stabilizer to deform.  Is it normal for the Warp stabilizer?

  2. the stabilizer Warp allows you to copy a clip and then paste attributes of other clips?

  (1) I have seen that in the past, a red line on the clip but the effect was still applied.

  Make sure that you are on the latest version of 2015.2. A lot of improvements.

  (2) Yes you can, but there is no point in doing this you always press the button analyze each and each of the clips.

  And having curves too analyze even is likely to choke.

• Hi me Mamadou Moustapha I bought apple that i phone 6s a few days find out who the best phone of the world, because the day I bought it, I had questions on screen and when I went to the service center, they said they're going to update they have updated o

  Hi me yedess apple that i 6 s phone few days back knowing have the best phone in the world since the day I bought that I have questions on screen and when I went to the service centre they said they're going to update, I bought they updated after that I have the same problem now they say they're going to fix very terrible situation for apple this new product which has manufacturing defect they will repair, I asked to change device they deny because they want to fix m single i face the problem of the first day of the customer are powerless and that they only make just crazy.

  It's what warranties are for. If you bought the phone from Apple or an Apple authorized reseller, iPhone, you have 14 days to return it for a refund. After that the Bank should replace the phone. If you did not buy from Apple or a shop authorized, you must respect the terms of this store. However, Apple will always replace the phone, if you contact them directly.

• Re: a few questions about the recovery of product on my laptop Satellite L450D-113

  Hey there, fellow buyers of Toshiba.

  I have a few questions on prod. recovery on my laptop.

  * Is _First, safe? _ *
  Because my sister it on his Vista laptop (a Toshiba) and finished with a BSOD and a trip to the PC world for a replacement HARD drive.
  -----
  * _First, he will restore C: and D:, or just C:? _ *
  Inadvertently, I deleted the D: partition on my hard drive and he would like to return.
  -----
  * _Third, I am formatting due to incompatibility with some applications, namely 32 bit ones._*
  I can somehow incompatible lance 32-bit on my 64-bit?
  -----
  * _Finally, it erase Ubuntu as well? _ *
  I have Ubuntu (10.04 LTS incase you're wondering) and want to keep the data that it is intact.

  -----

  YES, I backed UP MY DATA (here, that goes with the words "I have no sti - oh, wait, what's that noise clicking / grinding?")? I just do not feel comfortable with the formatting yet until I know answers to these questions, but there again, I have only 200 MB left of C: (go, 250 GB in 8 months?) and need the return performance (GHIII and GTA: San Andreas used at 40 fps, but now play them is wading through treacle (LAG)!) Please respond quickly, and I look forward to answers!
  -----
  Toby

  Hello

  > First of all, is it safe?

  recovery process is completely safe.

  > Second, he will restore C: and D:, or just C:?

  He will restore the os with the settings on drive C;. Local d it will create image file from hard drive which I know.

  > Can I run 32-bit incompatible somehow on my 64-bit?

  It depends on the application. I mean, do a right-click on the application and choose properties where you can Compatible mode.

  > Finally, it clears so Ubuntu?

  If it is installed on local d: I guess that will erase. To be honest, is not sure

• A few questions about the Satellite Satellite C55 - B

  I have a Toshiba Satellite C55 - B, the card network LAN adapter, appear and disappear and the USB port on this side too, the airphone near these ports port also have problem too.
  When I use airphone and close and open the screen I can hear a sound and the volume is up and down.

  A few days ago, I opened the laptop and check all components inside, and then when I close and restart the network LAN adapter and the USB port is displayed, and now that they disappear.

  Please if someone could help me

  > Yesterday I open the laptop and check all components inside
  You disassemble the laptop?
  O man this affects and the guarantee of s notebook :(

  However, I would also recommend to load the image of Toshiba and to perform the recovery.
  I hope that this would solve the annoying problems.

  I can't imagine that this could be a hardware problem, but as you probably know: everything is possible.

  However, I keep fingers crossed that your questions would not appear after you set the notebook to factory condition.

• A few questions on the Satellite U920t-100

  Hello

  I bought the Toshiba Satellite U920t-100. for this tablet, I have a few questions. simple install windows 8 Professional on the current installation?
  what driver, software installed and other toshiba? are the problems with it?
  There is something about a pro installation win8?

  What of the screen when I run the u920t with an external monitor?

  I want to buy the Toshiba PA3927E - 1PRP Dynadock U3
  is it a good idea for it?

  Best regards

  All these questions different so let's start with first.

  > simple I can install windows 8 Professional on the current installation?

  Read this FAQ from Toshiba document. It provides all the answers and a detailed instruction.
  [How to change Windows 8 for Windows 8 Pro | http://aps2.toshiba-tro.de/kb0/HTD2B03F20002R01.htm]

  > what driver, software installed and other toshiba?
  Windows 8 uses the same drivers as Pro

  > What about the view when I run the u920t with an external monitor?
  What do you mean exactly? You can use internal display, external display or both at the same time

  > I want to buy the Toshiba PA3927E - 1PRP Dynadock U3
  > which is a good idea for that?

  Why not. Dynadock U3 supports own GPU so you can use 3 monitors at the same time

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• Re: A few questions about the Satellite L300 - 145 (PSLB0E)

  Hello

  I have a few questions that make me go nuts.

  1 - this laptop what chipset is actually uses? GL960 and GM965? Since it has 2 GB max ram I would say GL960, but that one is capped at 533 mhz and 667 mhz are the Rams came with the laptop. Also the name of drivers chipset gm965, said, I don't know if it's the name for the entire group of chipsets or if it's really a GM965. And also GL960 has no integrated graphics, but this laptop only, and GM965 has an integrated graphics card.
  to prove that I do things to the top you go here:
  [https://ark.intel.com/products/29830 | https://ark.intel.com/products/29830] GL960
  [https://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller | https://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller] GM965

  2 - if it's a GM965 why the computer only suports laptop 2 GB ram max, while officially the suports 4 GB chipset?

  3 - Why is there not a page on the website of toshiba (al less in the Web site code) which tells me the full specifications for this laptop, as if there is a page for others more recommended laptops?

  Post edited by: Kailido

  Your phone has Mobile Intel GL960 Express Chipset inside and can handle with 2 GB of RAM only and you can use the monitoring modules:
  1 GB-DDR2-667-PA3512U-1M1G
  2 GB DDR2-667-PA3513U-1M2G

  Unfortunately I can't answer your last question. This question is for Toshiba directly.

• A few questions about the feature Satellite A300D - 14 p

  I have the model Satellite A300D - 14 p a month. 2-year warranty. I have a few questions and ask for help and suggestions I have to do?

  * My quality of the camera * is VERY poor, with a lot of light on, I can get image quality generally ok. Inside, next to turned on the two options, night mode, or backlight compensation, I can hardly see my face, very dark and very bad quality. Second problem, it is a blue led light, it is annoying because half of the picture is always blue, somehow made light photo half which is always blue:(((j'ai utilisé modèle portable L300 série (moins cher que le mien) with the same device and that blue light, it works perfectly :()

  * Autonomy and start up Vista OS *? In little 1.5 hour energy saving mode? Surf train and nothing else... I asked Toshiba support here in Serbia in this respect and they told me that it is normal and measure the battery life (2,... h) by specifications, this is when my screen is off and computer do nothing? They also said that starting normal time for Vista OS is maybe more around 1.45 min?

  If I install win XP is it possible to get longer battery life?

  I have to go in service Toshiba or what?

  Thank you very much and sorry if I'm boring :)))

  Nikola

  Hay Nikola

  You are not boring at all and welcome to this forum.

  I don't know where to start. ;).

  I have Satellite A300-1LI in front of me and I use it about a month now. Startup time is very interesting theme and with a good configuration, you can optimize and make much shorter as with factory setting. Please read a very interesting thread about it under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947
  Do the same with your Satellite and I hope that you will be satisfied.

  Battery operating time? I have to say that information about two hours are realistic and I can confirm that. The same thing on my Satellite. But to be honest for mobile computing, it's OK. I've changed several notebooks and just business laptop Tecra had to linger battery operation. What you can do is check the Toshiba support site and look for info on the more powerful battery. I don't know, but you can use the battery (Li-ion, 9 cell, 6000mAh).

  On cam, I can't say much. It works on my Satellite on OK and I am satisfied. OK quality is not the same as for integrated cam but good external webcams it's OK.
  If you are not satisfied with trying to speak with the nearest service or try to compare it with some other Satellite by your local dealer.

  If Nikola, if you have more questions please post again.