Questions of workflow with the AVCHD video

Similar Questions

• No audio with the AVCHD Clips imported in EP 11

  I have the Premiere Elements v11.0 running on a computer, Windows 8. I've updated MOUS and no more updates are available.

  The AVCHD video, I'm importing is full HD, PAL at 25 fps. The audio is 384 Kbps 6 channels with a sampling frequency of 48 kHz. I can import and edit these clips in the first elements V7.0 running on a Windows 7 PC with no problems. The project used settings are HDV 720.

  With elements V11.0, audio is not imported that I ever try the project settings. There is no error message.

  I have the latest version of Quick Time (7.7.4) installed, although QuickTime does not include the file. Windows Media Player it plays OK - video and audio. VLC media player it plays OK.

  Is this a missing codec, a bug, or another problem?

  Suggestions please?

  Robsodav

  Despite the issues to follow, I saw that you wrote

  With elements V11.0, the audio is not imported that I ever try the project settings. There is no error message.

  And no problems with audio in the first elements 7 Windows 7 64 bit.

  I just want to go over your details so as not to take anything for granted.

  What are the properties of your source media? What is the file extension? You say AVCHD Full HD, PAL at 25 fps. and you add the project used settings are HDV 720. Why?

  The project preset is supposed to match the properties of your source media. From what you wrote, my read on this is that you

  AVCHD video compression 1920 x 1080 16:9 @ 25 (probably interlaced) frames per second.

  If so, the project preset should be 1080i25 PAL AVCHD Full HD 5.1 channels.

  If it is 1920 x 1080 16:9 @ 25 fps progressive

  then the the project preset should be PAL DSLR DLSR 1080p25 1080 p.

  So what is the reason for defining the project preset for what you describe to the HDV 720 which I in 1280 x 720 @ 25 progressive frames per second?

  What is your audio compression... Dolby Digital 5.1 channel or AAC 5.1 channel or other?

  What camera brand model is this video with audio from a?

  How do you get the audio video from the camera for first Elements11 timeline?

  Is it only the images of this particular camera that is at issue?

  Let us start here and see where your response.

  Thank you.

  RTA

• A few questions of workflow of the Warp stabilizer

  I'm looking for the best workflow with the stabilizar chain, because it consists 90% of my editing work.

  This is my workflow for the moment:

  1. Start adding my clips cut into the chronology of the first
  2. Click with the right button on the fragile clip and select "replace by AE composition".
  3. In AE I right click on the clip and select 'Stabilize the movement', during the analysis, I do step 2 with the other clips
  4. Once all the analisys/stabilization of all the clips I select "make the entire work area" first and check if the results are ok
  5. If ok, I add the transition between plans and proceed to the color correction
  6. I select "Make the effects in the work area" to get a glimpse of the final work.
  7. Get the sequence to the file.

  Usually the #6 of my workflow operation makes it much faster, but this on stabilized clips it takes much more time.

  Is my correct workflow or do any other changes before you replace the clip with the composition of EI?

  Is there a faster way to manage clips stabilized? (export a new file of the once stabilized AE..?)

  If I need to re - cut the stabilized clip should I just do it in public relations, again, and the analysis will be done automatically?

  Thank you!!

  Quick Watch. It takes only a moment. I give you two workflows. The first is to separate the clip you want to stabilize the chronology. Just drag it to another video track. The second is to select the clip and transitions. Not all transitions are supported. Again, look fast. It only takes a minute.

  You're not thinking through the process. It is very easy to add handles if you know how to change the settings of composition. It is very easy to replace images. A little math is all that is needed to be precise. You need not make the full clip. You can include the transitions easily, you can change the points and output in your AE project. It is quite easy once you think correctly.

• Workflow with the wizard

  I have a question about workflow, with a wizard to help me select the images to be used for a show.  Here's my current workflow.

  (1) mounting base and adjustment of images.  Reform of the obvious losers.

  (2) export images so that my assistant can rate/slaughter them.

  (3) import on sides of my assistant and use it to help determine what are the images to use.

  (4) show to create images.

  I am strugling with the best way to manage 2-3.  My assistant does not use the same computer that I do so using the same LR catalog and note using the LR library module does not work.  I would like to be able to publish in a shared directory, my assistant a tool allows to note the images here and then import it those transparent rear side in LR.  I think the API to publish has a facility to import * of * data - it can download the comments of photo sharing sites.  Can he do this?  This feature is already implemented?  Y at - it a plugin that does this?

  Does anyone have an idea of how improve this workflow?

  Thank you!

  David

  I have a LR catalog and 1000's of photos, but I have two computers that I want to work with them, so my workflow is to host the catalog and photos on a USB key drive permanently, I save on my drive internal, so I always have a copy backup of all that in the case where I drop the USB.  There is no export and import several times, just open the catalog on two different computers.  I have the USB key mapped as the same drive letter on both computers, so I don't have to mess with the remapping of the records.

  USB 3.0 portable drives are fast enough.  If it is a Mac environment I believe that there is a FireWire interface reasonably fast, too.

  ==

  However, if you want to work with pictures on the local disk, what is the problem with giving the wizard a copy of all of the LR catalog (which is relatively low compared to the size of the photos, in any case) and the range of photos via a share on their computer, allowing them to rate the photos, then simply copying the catalog back share?  Make sure the path to the pictures (and to avoid confusion, the catalog) are the same on both computers and it should work ok.  The two computers could access photos via a local drive letter, not a network share.  Just copy is made through the share.  You probably do not want to overwrite your catalog with their copy immediately in case they changed something inadvertently, but eventually you can serve additional copies on your side as serve you the backups that accumulate over time.

  If there's no privacy with what you have in your large catalog, they would not have previews or photos so would not be able to see things, just read the key words.  If it is not quite private, just segment your catalog in addition to one and put the photos that the wizard is allowed to see in a catalog that do you the above process with and let your photos more private in another catalog.

• Email with attached video will not leave the Outbox... Cannot delete Email with the attached video.

  Email with attached video will not leave the Outbox... Cannot delete Email with the attached video.

  Check to work offline , and then it should delete.

• How Zoom in with the app "Video"? Windows RT

  I have some videos that are of lower resolution and they occupy only a small part of the screen on the app "video". Is it possible to zoom in? Or y at - it another app that I can use that plays wmv that will allow me to zoom.

  Thank you.

  Hey Maher,

  The zoom feature is not available with the video application, but you can access the windows store and download a program that supports the zoom feature.

  Discover apps in the Windows store

  http://Windows.Microsoft.com/en-in/Windows-8/Windows-store

  See these articles for more information on the video playback using the video application:

  Watch TV shows, movies and videos

  http://www.Microsoft.com/surface/en-us/support/music-photos-and-video/watch-TV-shows-movies-and-videos

  Video

  http://Windows.Microsoft.com/en-in/Windows-8/videos

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

• Cannot publish projects with the inserted video - video The Flash error message cannot be loaded

  I created a Captivate 6 project with two blades which have inserted videos in their

  The two videos were created in Captivate 6 by publishing these projects as the mp4 videos

  They play very well in previews, but when I get the error saying Flash video can not be charged for two of these slides and in the output files, the video field is empty.

  I checked that videos are not open everywhere else that I saw on a previous post, that was the question, but the only place where they are in use is part of the project, I am trying to publish.

  Here are my settings and the error message

  

  Any suggestions would be greatly appreciated.

  Your screenshot shows that you publish in a folder on a network drive.

  You have:

  • Check if the movie file exists in the location of the published folder? (It should ideally be sitting in the same folder as the SWF file calling it.)
  • Check that the location of the folder is defined as a location approved in your Flash Global security settings?

• Computer does not start with the new video card

  Hello

  I have hp pavilion 500-277cb and I love it, but it won't work with my new video card

  The video card is
  Sapphire ATI over-pants 2460

  I heard 6 beeps and I turned off safe and active start legacy. It does not beep, but it is not start either, just black screen.

  It seems to me to have the latest version of the bios and windows 8

  What can I do else?

  Thank you very much

  Best,

  Korhan

  Hi JM,

  Did you remove the Intel HD graphics drivers prior to installing the ATI graphics card?

  Your PC comes with one of the following built-in Intel graphics drivers:

  • Graphics Intel HD 4400 (GT2)

• H8 1241: problems with the new video card on h8 1241

  OK, I've seen a lot of posts on this topic, but I couldn't find anything yet. I bought this computer as a windows 7, but have just upgraded to windows 10. The stock video card HDMI port came out, so I ordered an ASUS Geforce gtx 750ti to replace.

  http://www.Amazon.com/GP/product/B00IB9P1KG?PSC=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

  When I try to boot with the new card I get the blue screen that tells me to Press esc to get into the BIOS, but it is freezing it (I am not able to get into the bios).

  Currently, the only way to make changes are re - insert my old card. I can not even start without secondary card by using the on-Board (which could as a result of the changes that I made in the BIOS). Most of the solutions I've seen involved changes in version 8 of the BIOS but I can't get that. I tried to update my BIOS to the latest version for windows 7, but I don't think it worked b/c I am on windows 10 now.

  Help, please!

  Hello

  The level of your PC motherboard BIOS is not compatible with the cards NVIDIA GXT 7xx series.

  Contact ASUS to obtain redress. ASUS has maybe a video BIOS update or a different graphics card that will work in your PC.

  A NVIDIA GTX 660 new or used may be your best bet.

  Thanks for posting on the forum.

• Xlib & quot; sequence lost & quot; with the matrox video card

  I am trying to run labivew (8.2) tools (for example, nispy) on a system running redhat Linux 4 (2.6.9 kernel) with a video card Matrox P690 installed.

  Initially, I had a problem with libvlrt not being able to run because the _glapi_get_context symbol is not found. By loading a different combination of Mesa and openGL libraries I can get it to not complain about the coast, but the app crashes then go out with...

  Xlib: sequence lost (0x10000 > 0x6b) in its response of type 0 x 8!
  (null) X error of requests that have failed: 0
  Major opcode of requests that have failed: 0)
  Serial number of requests that have failed: 0
  Current serial number in output stream: 107

  If I use a NVidia video card or start a VNC session, so I don't have the problem, so it seems that there is a compatibility issue with the Matrox driver. I have the latest driver from Matrox.

  All the known world it or something similar and found a solution?

  Hi rpoffen,

  Looks like it's a different flavor of this post on the forum. Let's get some versioning of the road information. What version of openGL and libraries Mesa, Matrox drivers do you use? I doubt that we have a video here Matrox card to try, but I'll look...

• problem with the latest video games and hardware acceleration card driver is enabled

  When I try to pay games (spieder solitare and othere games who settled on the computer}, I get the message hardwareaccleration is not supported by your video card driver, which could slow down the performance of the game, make sure you have the latest driver for video card installed and that hardware acceleration is turned on.)  What should I do?

  Hello

  1 you get the error message while playing games or only with the games installed in the operating system?

  2. What is the number of brand and model of the computer manufacturer?

  Method 1 : update the drivers

  Click on the following link to get an idea on how to update the drivers

  http://support.Microsoft.com/kb/942462

  Method 2 : Disable Hardware acceleration

  Hardware acceleration

  Let us know if the problem is solved or not.

• I have a problem with the choppy video playback.

  I recently bought a surface of windows. When I play the movies from my hard drive, playback is choppy, although there is no problem with the sound. Is this a setting problem or software? The files are AvI, which should be compatible. Any help would be greatly appreciated.

  Hi, Bertie,.

  1. what video player do you use? Have you tried another?

  2. do you have all the updates of Windows and Windows Store on the device?

  This problem can be caused if the video driver is outdated.

  You can check the link and follow the steps in the Microsoft KB article and check if it solves the problem.

  Troubleshoot video card

  http://Windows.Microsoft.com/en-CA/Windows-8/find-install-display-drivers

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Curl call to start the workflow with the Type of table / Composite

  Hello I'm trying to start a workflow with an array type / Composite.

  I'm using curl to make the call and post fields look like this when you send just a string:

  {

  "settings":

  [

  {

  'value ':

  {

  "chain": {"value": "test"}

  },

  "type": "string",.

  "name':"vm. "

  "scope": "local".

  }

  ]

  }

  How would he format if I had a type of table / Composite?

  The composite type has the format of the Type / size and String / number

  Well, I don't know like what your workflow, but here is what looks like my quick test workflow:

  

  MESSAGE: https://YOUR-VCO-SERVER;8281/vco/api/workflows/475a3967-2c29-4140-a63f-ec1822ec330b/executions/

  Headers:

  Content-Type: application/json

  Accept: application/json

  And here is the json work to get into the body:

  {
      "parameters": [
          {
              "value": {
                  "array": {
                      "elements": [
                          {
                              "composite": {
                                  "type": "CompositeType(Type:string,size:number):drives",
                                  "property": [
                                      {
                                          "id": "Type",
                                          "value": {
                                              "string": {
                                                  "value": "NTFS"
                                              }
                                          }
                                      },
                                      {
                                          "id": "size",
                                          "value": {
                                              "number": {
                                                  "value": 20
                                              }
                                          }
                                      }
                                  ]
                              }
                          },
                          {
                              "composite": {
                                  "type": "CompositeType(Type:string,size:number):drives",
                                  "property": [
                                      {
                                          "id": "Type",
                                          "value": {
                                              "string": {
                                                  "value": "ext3"
                                              }
                                          }
                                      },
                                      {
                                          "id": "size",
                                          "value": {
                                              "number": {
                                                  "value": 25
                                              }
                                          }
                                      }
                                  ]
                              }
                          }
                      ]
                  }
              },
              "type": "Array/CompositeType(Type:string,size:number):drives",
              "name": "drives",
              "scope": "local"
          }
      ]
  }
  

  I've included the workflow here as well.

  Just a simple script:

  System.debug("Drives:");
  for each (drive in drives){
    System.debug("================");
    System.debug("Type: "+drive.Type);
    System.debug("Size: "+drive.size);
  }
  

  My results:

  

• A problem with the composite video display mode

  Hello!

  Since this morning, the composite video display mode of my sequences is black with a blue stripes dotted line.

  Each sequence is displayed with the same problem.

  Can you help me please?

  Lily.
  

  Hi Lily,

  Go to the file/project settings/general and change the rendering on "Mercury Playback Engine software only" engine.

  Press OK, you will get a dialog box in which you must select 'Remove Previews'.

  Try these steps and see if it works.

  Kind regards

  Navdeep Pandey

• Questions about synchronize with the database.

  Hi experts,
  
  With the help of Jdev11.1.1.5.0 - adfbc-oracledb10g
  
  I got quite stupid question.
  
  but I need to ask this question here.
  
  while I give make a right-click to eo synchronize with the database. EO get the newly created field.
  
  I had a vo is dependent on the OS. the vo not update how can get the field. ?
  
  Someone can help me.
  
  Published by: ADF7 on March 12, 2012 21:02

  ADF7,

  You don't the you in your VO up to you to add attributes manually. VO is supposed to be some specific use cases and so in general do not need all of the underlying fields of the EO. You can add them by going to the VO and the shuttle of new fields in the attributes list.

  John