A file corrupt vmdk - VD: error VERR_VD_VMDK_INVALID_HEADER

Similar Questions

• Cannot open .mov file corrupt - error 2048 format not supported

  Hi all

  I have an important file corrupt and I tried every way I can think to open, but to no avail...

  When I open it with Quicktime, a ' 2048 unsupported format ' error, even if the other videos I made are very good.
  I can't open this video with software like VLC and friends (believe me, I tried LOADS of them)...

  After doing a LOT of research I understand that neither the part header and closing of the file is messed up.
  Is anyone able to teach me how to fix these pieces?
  I am really at my wits end and I am a beginner just to hex-editing @. @ better still, if you are able to take a look at this video for me...

  I'll be very happy if someone can help me on what I really want to get the video, it's for an important friend, thanks in advance!

  PS the video is about 120 MB

  Hello

  I m using the tool called SUPER.
  It of free and you can convert any file format to any other format file
  It may be possible to convert its defective file in another format and ten you can try to open it again using VLC player or other application.

• Download XPsp3 error 'file corrupted '.

  I ran "SP3: <> http://www.microsoft.com/en-us/download/details.aspx?id=24 ' Microsoft Download site and saved on PC & tried to run. In both attempts, I got an error 'file corrupted '. Is there a suggestions on how to get the update of XP?

  It is reported that security software can inhibit successful installation of SP3. See...

  http://support.microsoft.com/kb/949377?

  Rather that to disable security software, uninstall may be a better choice because some 'disables' is not fully turns off. You already have the SP3 download then try this...

  • Make sure that you have the ability to re - install the security software (re - download or find installers, find a CD etc - also, to study the procedures for this with your provider support pages)
  • Disconnect from the internet
  • Uninstall your security software
  • Install SP3
  • Re-install security software
  • To connect to the internet and do Windows updates and software updates for security

  If you can't count on the possibility of re - install a security software for a reason any then just go with the neutralization of him while applying a SP3.

  You can also read this...

  http://support.Microsoft.com/kb/950717

  Tricky

• The requested flight file corrupt error flight simulator program could not start or cannot be found.

  When I go to start the flight sim (Fs9) program I get this error Message requested flight file corrupted or cannot be found.

  OT: File corrupted

  Hello

  I suggest you try the steps from the following link:

  Game hangs or quits unexpectedly
  http://support.Microsoft.com/kb/303032

  Note: Make sure that you reset the computer in normal mode once you perform the clean boot.

  If the problem persists, then I suggest you to the post office.
  http://www.Microsoft.com/games/flightsimulatorx/
  http://www.Microsoft.com/products/games/FSInsider/community/pages/default.aspx
  http://support.Microsoft.com/GP/games-for-Windows

• Get a 'file corrupted' error while trying to copy files to the flash drive mp3

  * Original title: corruption of copy error

  I am trying to copy mp3 files to my music on a flash drive folder and I get an error "damaged file".  Only files is not corrupt, he plays very well on my system so WHY not copy?  I had dealing with "disc is dirty" and "file is corrupt" questions for THREE DAYS and, if that is what is happening with Windows 7 (the upgrade of Windows 7 is relatively new) so I'm going back to Vista!  Someone please help me with this.

  Hello

  I suggest you to go from the following link and check if that helps.

  Convert a hard disk or partition to NTFS format

  http://Windows.Microsoft.com/en-us/Windows7/convert-a-hard-disk-or-partition-to-NTFS-format

  I hope that helps!

• Error: none known VMs. (check file corrupted jvm.cfg)

  I installed my Coldfusion 9 (multiserver edition on 64-bit, Linux) server to version 9.0.1. Now, when I try to start, I get the error:

  Error: none known VMs. (check file corrupted jvm.cfg)

  I looked the next file and java.home is pointing to the correct location (checked based on the problems of others with this error)

  It was on my dev server. On my QA and production servers, I have installed version 9.0.1 from the outset. So I tried to copy my next one of these machines, but I still get the same error.

  Is there anything else I can do to diagnose this error?

  Strange. The jrun executable was a 32-bit program. I copied one of my QA servers jrun and I'm back in business.

• "The missing config file corrupt" error message appears

  When I start my laptop, I get the "Missing config file corrupt" message and I can't start windows, it falls needs the original installation cd-rom!

  It seems that I do not have this cd? That I should?

  I don't want to just do a restore from the hard drive that I'll lose everything.

  Any ideas?

  Please, I beg you!

  Hello

  Have you tried booting in safe mode?
  If it is possible, then you can try to use the System Restore tool under Programs Accessories System Tools, you should find.

  Try to roll back the OS to the beginning. Well, if this procedure doesn't help then as said jmatthews you save files on the other computer and reinstall the operating system.

• Error file corrupted or incompatible, cannot import files MP3 to Windows Movie Maker.

  Original title: Amazon MP3 in Windows Movie Maker import problems.

  Still have Windows XP.  Bought and download MP3s on Amazon, but is unable to import into Windows Movie Maker.  Says file corrupt (all of them) or is not compatible (MP3 should be).  I tried to convert it to WAV and WMA - still will not work.  Get desperate.  I would be very happy any help you could provide.  Thanks in advance.

  Experienced same problem with Amazon MP3 downloads.  Could not bring to import into Movie Maker.  Read somewhere to convert WMA of the song, but couldn't find out how to do this.  I wanted to download 3rd party software.  Had already created the CD with the songs that I wanted to use mm.   Ripped from this CD for PC with Windows Media Player, which gives you option to change the format.  Changed the format to WMA format and then imported into Movie Maker.  After all, hope this time it helps you, too.

• When I click on all the files I get an error message says "without this user supported interface.

  When I click on all the files I get an error message says "without this user interface supported 'n I can't open any files or folders.

  A moderator is spent it to search in the Forum, the folders and files Windows of Feedback Forum.

  HI, Luvnmidlife,

  Windows operating system?

  It is the unique user on the system account?

  Create a new account to use for testing purposes.  See if the problem persists using the new account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• message "file corrupted Windows.

  When I record music, photos or back up files, I use a 48 GB external drive I have atttach to my laptop via a USB port.  This player comes back on my computer such as external reader1 (G) recently, I copied directly from my digital camera on the external drive a lot of pictures. I've done it before.  I checked to see if the switch were made and I got a message on the extern1 drive (G) "file corrupted Windows, the file / or directory is corrupted and unreadable."  Please run the chkdsk utility. Now, I can't get anything on my drive (G) Ext lecteur1.  The properties of this drive reads 421 GB of free space on 465 GB total so I have not the information is there.  How to retrieve it?  Thank you

  Did you you try to run the utility "chkdsk" on your G: drive with the "/ f" option?

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• I can't extract the zip files; I get an error message that says: "Application not found".

  I can't extract the zip files; I get an error message that says: "Application not found".  When I check help & press the Start button, it tells how to do it.  I thought a program to automatically extract compressed files came with Vista.

  Hello

  1. you use the functionality of Windows Vista to unzip file or third party software?

  2. have you done any software or hardware changes on your computer before this problem?

  To work with this problem, see the following methods.

  Method 1:

  Scan of the SFC

  Refer to this article for more information on how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.

  http://support.Microsoft.com/kb/929833

  View the results of the analysis.

  Method 2:

  Run the fixit from following link.

  Difficulty of broken desktop shortcuts and common system maintenance tasks
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  In addition, I suggest you to check if the .zip file has been associated with a particular program in the section default programs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  Check if it helps.

• Why can't I delete a file corrupted in my program files?

  I could not update my iTunes application in Vista 32 bit.  I tried the uninstall/reinstall, now it won't install because I have a file corrupted in my program files.  When I try to delete the file, I said that I don't have permission to delete, but I am the administrator of my machine.  WTF?  C:\Program Files\Fichiers Apple Mobile Device Support\SyncServices\Schemas\Notes.syncschema\Contents\Resources\Spanish.lproj\Localizable.strings
  "Make sure you have access to this directory?  someone please help
  -I now have ownership of the files, according to the guests. However, I now get error 0 x 80070091: the directory is not empty and forced either retry or cancel.  Thanks for the links.  Unfortunately, I still can't convince my machine to remove old files 8-(.)

  I FOUND the solution, thanks to Suzukibiker, Chaddington Boomhauer on SecondLife and Pyrografix on Microsoft TechNet.  Long story short, I activated the REAL administrator of my machine through http://www.autoshutdown.org/how-to-enable-administrator-in-vista.html and was able to take in hand the folder and files.  I then renamed the something VERY vulgar folder, only the iTunes Installer ignored later, allowing me to finally completely reinstall iTunes.

  Thank you once again for the excellent advice.

• Files corrupt in the command prompt

  original title: FILES CORRUPTED IN THE COMMAND PROMPT

  SIR IN THE COMMAND PROMPT, WHEN I PUT THE COMMAND SFC/SCANNOW AFTER 100%. I FOUND THE ERROR THAT THE FILE IS CORRUPTED AND COULD NOT FIX IT PLZ HELP

  Hello

  Please do not type in capital letters as it is difficult to read and considered to be shouting.

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  in Windows Vista
  http://support.Microsoft.com/kb/928228

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
  You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
  (You may need to search sfcdetails.txt if it is not created in the default folders.)

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• End of file on the software error

  I sought a solution to this for weeks now. And I'll just start by saying that it is not a FILE or a specific PSD which becomes and end of file error, but photoshop altogether.

  A few months ago I don't know exactly how long, I worked on a project in photoshop. I finished it, everything was fine. But when I went to open the PSD about a week later, to change the dimensions for the mounting, I got this error at the end of strange file. I have just moved and accessible of photoshop on one of the computers in the school. Now, I have to do another project and I NEED to use the software on my laptop but I STILL get the error at the end of file.

  I tried to uninstall and reinstall photoshop so much creative cloud.

  I tried to completely restart my machine to factory presets and the current computer relocation updates creative cloud AND Adobe.

  I tried following all the interactive tutorials to go to your C: drive, or don't enter your personal system files and program files - there are no "Photoshop" files or information in there.

  Help.

  UPDATE: the version is Adobe Photoshop CC 2015

  HI Margaret,.

  Even if you have suggested, is not a specific problem of files, could you please try the following steps for all a file that gives the error.

  • Right-click on the damaged document and open it in Illustrator.
  • Save the file as a .pdf file
  • Right click on the PDF and open it in Photoshop.

  This would flatten all the layers, so you can first make a copy of the file.

  Also could you share your workflow? You save files on the local disk or a network drive?

  That the savings of the files on the network could probably corrupted files.

  Kind regards

  Gerard

• Format disk VSANS for 3.0 is not / / failure realign suite virtual items SAN / / due to the confinement or the absence of file descriptor vmdk, requiring a manual correction.

  Hi all

  After the upgrade of "6.0 Update 2" and try to update the disc format to version 3.0, I received the error message below.

  Impossible to change the route following the virtual items SAN:

  be4db256-0ab4-9801-c523-0cc47a3a34ca, c2bcb056-5d5f-0f02-f096-0cc47a3a3320, c0bcb056-70a6-180c-c583-0cc47a3a3320, e413b256-90b5-dd1a-cce6-0cc47a3a34ca, c2bcb056-64aa-ee1e-0bb3-0cc47a3a3320, c0bcb056-4b47-5529-b59d-0cc47a3a3320, 6644b256-e0f8-3338-737d-0cc47a3a34ca, d411b256-08ea-f83b-9774-0cc47a3a34ca, c0bcb056-a489-9541-efbe-0cc47a3a3320, 3f6abc56-28fd-4a48-4f8a-0cc47a3a34ce, d411b256-784F-a45a-714d-0cc47a3a34ca, c1bcb056-6671-c45c-2254-0cc47a3a3320, 3f6abc56-1061-ab60-e4c8-0cc47a3a34ce, f17bb356-fcdf-3469-502-a-0cc47a3a3320, cfe8b156-606f-ee6a-4356-0cc47a3a34ce, d411b256-4450-3777-e3bf-0cc47a3a34ca, c1bcb056-b24e-cb7a-7b1a-0cc47a3a3320, f17bb356-f008-9581-2468-0cc47a3a3320, 31bdb056-0a02-4882-9094-0cc47a3a34ca, c1bcb056-2a83-a596-ed2c-0cc47a3a3320, f17bb356-08a1-529f-c375-0cc47a3a3320, c1bcb056-4edc-FFAF-bf04-0cc47a3a3320, c1bcb056-c9e2-fec8-1930-0cc47a3a3320, c1bcb056-4e92-e4e4-9b92-0cc47a3a3320-e413b256-dcd0-f6fd-8ae2-0cc47a3a34ca,

  due to the confinement or the absence of file descriptor vmdk, requiring a manual correction.

  Does anyone has an idea to solve this problem?

  The articles and the script are now available to resolve this problem. A more permanent solution is in preparation.

  Details of the issue, including links to the scripts and KBs are here - http://cormachogan.com/2016/03/31/vsan-6-2-upgrade-failed-realign-objects/

  Thank you for your patience.