Wireless Setup...

Similar Questions

• HP Photosmart premium printer that disconnects constantly with my wireless setup.

  My Photosmart printer disconnects constantly.  I have to go to the Wireless Setup Wizard to bring him back.  I use a laptop HP pavilion dv6-321.  I also have 2 dell desktop computers that are connected is the same too.  I'm using Comcast as my ISP and have a Cisco's Linksys wireless router.  Can anyone help?
  Thank you.

  Hello

  1 did you change on your computer before this problem?

  2. what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Follow the suggestions and see if it helps.

  "Method 1".

  Follow the steps in the article.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2

  Check to see if the problem exists in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  (For Windows 7)

  Previous post your answer for you help in this matter.

• Wireless Setup problems

  I have been using my p1102w with the usb connection, but due to the reorganization of the House I would like to configure the wireless. I went to start and programs and click Wireless Setup. When it asks me to choose my SSID, I select it. It gives me an error "the printer could not communicate with any router or with the given SSID access point" or something of that nature. I made sure that the wireless button has been pushed on the printer, so it was blinking. IM at a loss to know what to do now. Thank you.  My model is CE651.

  For the readers of the forum of the future, I solved my problem by changing the name of my network to something without spaces. For example, instead of "fluffy dog" is now "fluffydog". After that the installation program immediately recognized my SSID.

• Photosmart B110a - Wireless Setup Assistant starts whenever it is turned on

  Hi all

  I just spent half a day to set up my new printer wireless HP Photosmart B110a. (CN245B)

  He luckily easy, but ultimately all the software is installed on two computers and printer is wireless connected to the router on my home network. Printing, ePrint, scanning everything works fine.

  With the exception of this problem: I turned off the printer using the power and she handed over after 10 minutes. I've done several times, and when turned on, every time the printer wonder if I want to configure the wireless connection. If I click on Yes, then he begins the wizzard - wireless and the password must be entered again etc. If I click on no, then the printer just starts and runs very well. It seems that he does not lose the connection settings.

  Whenever I turn on the printer with the button, it is from the wireless configuration wizard. Is this a bug?

  How can it be solved?

  Thank you

  Smartyx.

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you don't know it, enter the current IP address.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP address of the router to the bridge and the first DNS entry.  Let the second white.

  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• C8180 and having problem Wireless Setup.

  I have a C8180 that I use wired to my router for over a year, but had to move the router (WRT54G v2 w/fw ver 4.30.5) to reflect the location of the modem sat (new).  I really want to connect a cable through floors and walls if not absolutely necessary, then try to configure the wireless printer.

  Problem is that I can't find the correctly entered WPA key via the front panel.

  Suggestions? Is there a utility that I can use to configure that temporarily wired while? or via USB cable (still tentative)?

  I tried to ask the question about the live chat support, but the session has been altered somehow.

  Thanks in advance for any help or suggestion.

  With the ethernet cable is still connected, type the printer's IP address in a web browser, and press ENTER. Now click on the network at the top option, select Wireless 802.11 g from left to right, and then start the Setup from there wireless Wizard. Now, you can type the password on the keyboard, and it should work fine. Unplug the ethernet cable before turnin on the wireless radio to check if it is connected.

• in 2920 MG Canon printer Wireless Setup

  Can someone tell me hot to set up wireless in the cannon MG 2920 printer? Thank you

  Hello Guimata!

  So that the community can help you better, we will need to know the operating system you are using (Windows XP/Vista/7/8 or Mac 10.x) and any error messages you see.

  Any other details you want to give help only the community better understand your question!

  If there is an urgent need of support, please CLICK HERE to join our team of technical support by phone or e-mail friendly.

  Thank you and have a great day!

• 4620 Wireless Setup problems

  Having problems connecting to the router HP 4620.  Using a new Apple Airport Extreme.  Move the flashing blue light on the printer.  Anyone?

  You should have a really easy option here to connect the printer to your network. If you are installing the printer via the USB port, there should be a way to activate the wireless configuration wizard which should convert the machine during a wired to a wireless USB connection. Let me know if it works for you and I'll be back just for you!

  -Spencer

  PS I hope you have a wonderful week!

• Network with DSL and wireless setup problem

  I use two number of script and lan proxy... NW its Internet connects only via script... no more connection with lan numbaer, I checked dsl. the amount of the fine... Help, please... also

  Give me some advice on, dsl, wireless configuraion in switches

  Kind regards

  Mohammed

  Used Google...

  http://www.Google.com/#hl=en&&SA=X&EI=gbX-TJTwBsWclgfevL29CA&SQI=2&ved=0CBMQvwUoAQ&q=DSL+, + wireless + configuration + in + switches & spell = 1 & fp = e18ec2db23988f7d

  --
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• HP pavilion dv4000 (dv4223ea) Wireless Setup problems

  After you have reinstalled windows xp on my hp pavilion dv4223ea I can't find a software for its wireless card. I already tried all drivers wireless hp for this product site. I thank very you much for your time in advance.

  Hello:

  Go to Device Manager and click on the drivers who need network controller.

  Then click on the Details tab.

  After the string of characters you see that start with PCI\VEN.

• Wireless SETUP problem

  Good day everyone,

  Yesterday, I received the DELL INSPIRON 15 (INSPIRON 3543) - serial number ADMIN NOTE: maintain the label removed by privacy policy >

  Core i5, 4 GB ram.

  I have a hard drive SSD to accelerate the machine, and I didn't use windows 8, so I installed my copy of Windows 7 ultimate x 64.

  Since there is no drivers, I downloaded the keyboard and driver of the mouse as well as the wifi & Bluetooth driver on my Samsung laptop then I transferred the files on the Dell and install - everything was going well until I started to download the other drivers (directly from the Dell site). After you install the rest of the drivers I continued to receive (and I don't always) an error message on the configuration without wire - Notification dll has not been registered, program will not work correctly.

  I can't find anything that will help my situation - I tried on the advice that I found on Internet to run CMD as administrator and typing a line that would register this dll<-- that="" didn't="" work.="" apart="" from="" that="" i="" couldn't="" find="" any="" other="" solid="">

  I am not very happy I haven't had this laptop for 24 hours and already I have two questions. The other problem I have is a critical update windows - I don't have the number of KB on me, but whenever I try to install it, it would give me a screen blues and it would be empty physical memory.

  Never forget the memory dump - I need to address the problem of wireless configuration as the Dell's for my father and he will be 1 million questions that I can't answer.

  Any help will be greatly appreciated.

  Thank you.

  Well, the reason why I don't want to Win10 on my pc is because I heard a lot of bad things about it - I don't want bugs on my pc. So I installed the single OS, currently approved, Win7.

  All the drivers have been downloaded from the dell site, according to the service number and the operating system selected.

  In the meantime, it would seem that I managed to solve our problem by following these steps:

  START > all PROGRAMS > ACCESSORIES > right click on command prompt, select RUN AS ADMINISTRATOR--> now follow the steps below:

  After the C:\\WINDOWS\sytem32 > (some thing on the screen of the COMMAND PROMPT... basically whatever you would have, just start with step below).

  type: space

  then type in: regsvr32

  then type: space

  then type: wltrynt.dll

  Press: enter

  It worked for me - I restarted several times and have not yet had the error back to the top.

• Wireless Setup Notification DLL has not been registered

  Get this pop-up. Follow all the info of the previous posts... and nothing.

  Blue display of the screen but no way to hit any kind of menu a fortiori start button.

  Tried resetting through F8 etc.

  Hello

  Thanks for posting on Microsoft Communities.

  There are several cases where this problem my forces occur. For better assistance, I need more information like, when you see this notification message?

  If you experience this problem when the wireless network configuration, you can do the steps mentioned in the link below:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  If the problem persists, please send us a screenshot of the error message. You can follow the steps mentioned below link to take the screen shot of the error message.

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476A-85A6-b021181be7e4

  Please answer us on the State, we would be happy to help you further.

  Thank you.

• C6180 Wireless Setup Assistant does not work

  I have a Toshiba Satellite and a HP Pavilion PC, both running Vista.  I replaced the wireless router with a new Cisco Valet M10 - all computers run wireless successfully with the new router.  My printer says "offline" in the control panel.  I restarted the router, the printer and the PC several times.

  I have reset the default settings of the printer and tried to run the wizard from the HP C6180 wireless configuration but it cannot find wireless networks and just keeps searching until I have Cancel.

  I printed the HP network configuration page and lists the IP 0.0.0.0.

  How can I run the installation wizard and get the printer connected to the network or router?  Is it possible to manually enter the network name and the key/password to get the printer to connect to the router/network?  Is there another way?

  Hmm, your wireless radio may be dead.  Print a network Test Wireless in the network menu.

• Passphrase WPA Wireless Setup

  I have a new network which has numbers like the WPA code. How can I enter numbers instead of letters on the keypad of the printer in the wireless

  Assistant

  Please specify your printer model.

  You can usually type numbers by pressing the button several times until the number appears (similar to SMS)

  A touchscreen will more probably a touch button with number on the button to switch to a digital keyboard.

• I CAN'T CLICK/PRESS TO ACTIVATE MY BLUETOOTH FOR WIRELESS SETUP

  IT SEEMS THAT EVERY TIME I WANT TO TURN ON OR TURN ON, IM NOT ABLE TO. SINCE THEN WHENEVER I CLICK ON IT, IT STAYS DISABLED.

  THIS IS WHAT I WANT TO SAY...

  UNDER SETTINGS FOR LAPTOP--> WIRELESS--> WIRELESS DEVICES

  --> WIFI (NO PROBLEM, I CAN NOT EASILY ENABLE AND DISABLE)

  --> BLUETOOTH (I CAN NOT CLICK AT ALL, IT STAYS OFF)

  IM A USER OF ACER.

  WINDOWS 8.

  I'VE ALREADY PUT THE BLUETOOTH SUPPORT SERVICE TO AUTOMATIC.

  I ALSO RUN THE CMD FSQUIRT. EXE

  AND MY BLUETOOTH IS CURRENTLY UP-TO-DATE.

  MY PHONE CANNOT DETECT MY BLUETOOTH CELL PHONE FOR THIS REASON. AND OF COURSE, I AM NOT ABLE TO USE THS PORTABLE TO ALL BLUETOOTH!

  PLEASE HELP ME >.

  Hello Sara,.

  Thank you for your response.

  I appreciate your time.

  I suggest you to update the drivers Bluetooth and chipset from the links of information in Windows 7 compatibility mode and check.

  Bluetooth
  http://global-download.acer.com/GDFiles/Driver/Bluetooth/Bluetooth_Atheros_7.01.000.18_W7x64_A.zip?acerid=634230534078024024&Step1=NOTEBOOK&Step2=ASPIRE&Step3=ASPIRE4741ZG&OS=ALL&LC=en&BC=ACER&SC=PA_6

  http://global-download.acer.com/GDFiles/Driver/Bluetooth/Bluetooth_Broadcom_6.3.0.6000_W7x64_A.zip?acerid=634230535750065444&Step1=NOTEBOOK&Step2=ASPIRE&Step3=ASPIRE4741ZG&OS=ALL&LC=en&BC=ACER&SC=PA_6

  Chipset
  http://global-download.Acer.com/GDFiles/driver/chipset/Chipset_Intel_9.1.1.1025_W7x86W7x64_A.zip?acerid=634127050526736418&STEP1=notebook&Step2=aspire&step3=ASPIRE4741ZG&OS=all&LC=en&BC=Acer&SC=PA_6

  See also:
  Make the programs more compatible with this version of Windows
  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Please keep us updated.

  Thank you

• J4680 Wireless Setup problems

  Help!  I just bought a J4680 all-in-one.   I tried to configure the wireless.   He failed on filtering.   The print sheet, suggested that I turn off MAC filtering in my wireless router.   I have connected to my wireless router & found that this option was already disabled.    What is my next step?   (I can get the printer works correctly using a wired connection).    Can I configure a static IP address instead of using a DHCP address?   Who will work in its place?

  Try to change the channel from router to 11 and then to restart the printer.