A general system error occurred after the P2V conversion
Hello
I have trouble starting a virtual machine right after P2V with VMWare Converter4.3 conversion.
My infrastructure is ESXi-4,1 to connect using vSphereClient.
The material is: Dell Power Edge T310 - 64-bit; 4 GB of Ram; CPU intel Xeon 2.4 GHz 4 cores per socket.
Already running 2 VMs - MS Server 2 K 8 64-bit, DC and File server.
Just added one more VM workstation XP Pro 32-bit and the cant restart it. Error I get is: a general error occurred: the virtual machine could not be started.
any help with it?
It uses IDE or SCSI controller? If IDE, I'd do the conversion again and move the SCSI controller
See also
http://KB.VMware.com/kb/1033243
Tags: VMware
Similar Questions
-
Many people, I'm a little in the soup this time!
My goal is to improve of vSpere 5.0 to 5.5 has. I have the new device ready to go, but the old device just not show me the upgrade tab. Because I had already taken a snapshot, I thought that I would give to the 'update' a go. Then I changed my mind and tried to go back to the snapshot and received the error in the title:
A general system error occurred: could not remove the file change tracking.
I wonder if there is a difficulty, I can try to get back to a good functioning device 5.0 before I retry upgrade - or if I should just set up my new 5.5 a device from scratch. I use only 3 guests on more Essentials.
Thanks for all the tips!
If he has only 3 guests, I will deploy a 5.5 device costs.
Concerning
Girish
-
Migrate the virtual machine fails - "a general system error occurred.
I have a host in my cluster which I am unable to migrate all the machines. Migration always fails at 13% with the error "a general error has occurred: There is no message after the colon. In tasks and events, I see the following under events:
- "Migration error" warning: a SNMP trap was sent
- Alarm "migration error" [name of the VM] action
- Alarm "migration failure" changed from gray to gray
- Cannot migrate to [NEW HOST], [STORAGE]
The substantive test on the list is the first.
VCenter is version 5.5 and ESXi is 5.1 on the source host and destination.
The lack of information in the error message let me very well what to do next. It is a cluster of production so I'd like some suggestions that don't involve slaughter the hosted VMs. thanks in advance for your help.
Take a look at this KB: KB VMware: VMware ESXi 5.x host stops responding when you try a vMotion migration or a configuration change
-
Updated to the latest Version of Firefox and checked for updates on all the applications but no change and the error occurs whenever I have select a snippet or try to scan down or to the top of the page.
This problem is caused by the vidbar extension
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
Windows 2000 Server VM blue after the P2v conversion screens
Hello
I'm having a problem of blue screen with a virtual machine after a P2V of a box of Windows 2000 Server conversion. The bluesceen error is attached. The P2V was carried out using the latest version of VMware Converter.
Someone at - he encountered this before? Any suggestions?
Thanks in advance,
Pedro
It could also help...
-
SQL database Suspect after the p2v conversion.
When I run my server sql p2v conversion 2000, one of the databases appear as 'suspect' and will not rise? I've been running conversions every day for months without problem, but has added an array with a MSA50 P600 controller and moved databases to the MSA50, and left the logs on the server (placed in a directory). I don't understand why this data appears as a suspect after the change. I can't knock the sql services since this is a production server. I run on VMware server 2.0 p2v conversion.
You should try using the version converter 4.0 beta because we made some improvements to solve these problems (some changes in the way which we snapshot). Also use Converter 4.0 beta, you can choose to stop SQL services before taking snapshots, so ensuring consistency of the database.
-
Same material, cannot vmotion. Stops at 13% with a general system error occurred: invalid argument.
I have four IBM (now Lenovo) x 3550 M4 (7914AC1) hosts that have been purchased by groups of two, several months apart. Those purchased at the same time can vmotion between them but they cannot vmotion with those bought later OR with one of our older infrastructure (Nehalem IBM level - x 3650 M3, M3 x 3550, etc.). The most recent M4 can talk to the fine old hosts. Can I migrate invited powered down.
VMware support was not able to give any help on this matter and have lost instead of my time (including do not contact me for weeks and also current exit without changing to another engineer; manager failed in this regard, too).
I pulled the material apart - I can say it's all the same material (looks the same, has the same numbers and RUF). The machines were configured the same.
Firmware isn't exactly the same thing on the material but is VERY close. I have one of each generation updated with the same Xpresspacks of IBM, and so except for the image diagnosis of pre-start, I think that they are the same. I'll check this again once then.
VMware drivers are the same. They were not. They are now. I got 5.5 latest drivers for everything that I can find a driver for (including cards CF - using the driver Qlogic native VMware NICS (igb); approx 10 GB (not being use IGB but fact still); the provider CIM, MegaRAID controller. I used VUM update their last 5.5 (standard license) with all the patches. vCenter is a 5.5 vCSA was last updated. I went into the BIOS settings side-by-side and ensured that everything is the same. I did the same thing with everything I could think of in vSphere (found about 5 differences, but nothing fixed).
Management is the network of vMotion. It's on the same VLAN as one of those guests are on (the clients are spread over 5 different VLAN). VMware support put in place a different vSwitch for vMotion with no luck.
The symptoms are the same regardless of their orientation (old to the new, new to the former) and don't care about the type of virtual machine (Windows 2008R2, CentOS 5.5, RHEL 6.7) or at the level of the material (VM 10 or 7 VM). It also fails if it is standard or high priority or if it is with the web client or the Windows client.
The place with the most characteristic symptom that doesn't show anywhere in googleland except to the pastebin is in the file /scratch/log/hostd.log of the host. The host that sends the guest throws a vmsvc.vm error VMotionCmdCb [1461010590046389] 'a': error - 6: invalid argument.
If anyone else has seen this (obviously someone because it is on pastebin) and understood, please enlighten me.
Thank you!
Jeff
These are the two hostd.log files (most recent, from the host first, then older receiver host).
-----------------------
From Server hostd.log:
-----------------------
2016 04-18 T 20: 16:29.927Z [37501 B 70 verbose "Default" opID = user F2241F42 - 000018 D 1-64-1 b = vpxuser] AdapterServer: target ='vim. VirtualMachine:2', method = "refreshStorageInfo".
2016 04-18 T 20: 16:29.956Z [37501 B 70 'Hbrsvc' verbose opID = F2241F42 - 000018 D 1-64-1 b user = vpxuser] Replicator: VmFileProviderCallback VM (id = 2).
2016 04-18 T 20: 16:29.972Z [37501 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"
2016 04-18 T 20: 16:29.978Z [37280 B 70 'Local' verbose opID = cb7f34c4 user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."
2016 04-18 T 20: 16:29.992Z [37280 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"
2016 04-18 T 20: 16:29.993Z [37280 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"
2016 04-18 T 20: 16:30.002Z [37280 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] AdapterServer: target ='vim. LicenseManager: ha-license-manager ", method = 'GetLicenses'"
2016 04-18 T 20: 16:30.002Z [37280 B 70 verbose 'Vimsvc.ha - License-Manager' opID = cb7f34c4 user = vpxuser] load: existing file loading: /etc/vmware/license.cfg
2016 04-18 T 20: 16:30.014Z [37280 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] ha-license-manager: validate-> valid license found for "VMware ESX Server 5.0" (lastError = 0, desc.) IsValid:Yes)
2016 04-18 T 20: 16:30.172Z [35981 B 70 verbose opID "Default" = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] AdapterServer: target ='vim.host.VMotionManager:ha - vmotionmgr ", method ="prepareSourceEx"
2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vcsvc.VMotion' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] PrepareSourceEx [1461010590046389], VM = '2'
2016 04-18 T 20: 16:30.172Z [37280 B 70 info "Vcsvc.VMotionSrc (1461010590046389)" opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionEntry: migrateType = 1
2016 04-18 T 20: 16:30.172Z [37280 B 70 verbose opID ' Vcsvc.VMotionSrc (1461010590046389) "F2241F42 - 000018 D 1-64-a2-71 = user = vpxuser] JrnlCreate: created 1461010590.14
2016 04-18 T 20: 16:30.172Z [37280 B 70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] Transition State (VM_STATE_ON-> VM_STATE_EMIGRATING)
2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.eduvmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare (1461010590046389): sending "to" srcIp = 10.10.6.108 supporting = 10.10.6.73, type = 1, encrypted = false, remoteThumbprint = 28, 5 C: C3:9 C: 3E:BA:79:EA:B5:19:CC:A9:36:34:C1:10:48:46:F0:0E
2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = srcLoggingIp
2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = dstLoggingIp
2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: srcMgmtIp = 10.10.6.108
2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: dstMgmtIp = 2620:91:0:96:73
2016 04-18 T 20: 16:30.172Z [37280 B 70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = dstVmDirPath / vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7 /guestvm.mydomain.edu/.
2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: dstVmFileName =guestvm.mydomain.edu.vmx
2016 04-18 T 20: 16:30.173Z [37280 B 70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] SetVmdbVirtualDeviceChange: deviceChange # 0
SIOC: SIOC is not notified to start the injector
2016 04-18 T 20: 16:30.173Z [37280 B 70 verbose opID ' Vcsvc.VMotionSrc (1461010590046389) "F2241F42 - 000018 D 1-64-a2-71 = user = vpxuser] Migration changed state from NONE to BEGIN
2016 04-18 T 20: 16:30.173Z [37280 B 70 info 'Vcsvc.VMotion' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] finished scheduling PrepareSourceEx [1461010590046389].
2016 04-18 T 20: 16:30.173Z [' info 36591 B 70 ' vm: / vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7 /guestvm.mydomain.edu/guestvm.mydomain.edu.vmx "] disconnect the current control.
2016 04-18 T 20: 16:30.173Z [FFA4FB70 verbose opID "Default" = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] AdapterServer: target ='vmodl.query.PropertyCollector:ha - property-collector ", method = 'createFilter'"
2016 04-18 T 20: 16:30.174Z [info 372C1B70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx '] VMotionCmdCb [1461010590046389] 'a': error - 6: invalid argument
2016 04-18 T 20: 16:30.174Z [info 372C1B70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx '] VMotionCmdCb [1461010590046389]: prepare the job completed with error vmodl.fault.SystemError
2016 04-18 T 20: 16:30.174Z [372C1B70 verbose 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx"] VMotionCmdCb: shooting ResolveCb
2016 04-18 T 20: 16:30.174Z [372C1B70 info ' Vcsvc.VMotionSrc (1461010590046389) "] ResolveCb: VMX reports needsUnregister = false for migrateType MIGRATE_TYPE_VMOTION
2016 04-18 T 20: 16:30.174Z [372C1B70 info ' Vcsvc.VMotionSrc (1461010590046389) "] ResolveCb: failed with error: {(vmodl.fault.SystemError)
-> dynamicType = < unset >
-> faultCause = (vmodl. NULL in MethodFault),
-> reason = "Invalid Argument."
-> msg = ""
->}
2016 04-18 T 20: 16:30.174Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] Migration changed State to BEGIN done
2016 04-18 T 20: 16:30.174Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] called finished
2016 04-18 T 20: 16:30.174Z [372C1B70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info] State of Transition (VM_STATE_EMIGRATING-> VM_STATE_ON)
2016 04-18 T 20: 16:30.174Z [37280 B 70 'Hostsvc' verbose] change of State received for VM ' 2'
2016 04-18 T 20: 16:30.174Z [37280 B 70 'Guestsvc.GuestFileTransferImpl' info] entered VmPowerStateListener
2016 04-18 T 20: 16:30.174Z [37280 B 70 'Guestsvc.GuestFileTransferImpl' info] successful VmPowerStateListener
2016 04-18 T 20: 16:30.174Z [37280 B 70 'Hbrsvc' info] Replicator: powerstate change VM: 2 old: 1 new: 1
2016 04-18 T 20: 16:30.174Z ['Hostsvc' 372C1B70 info] decremented SIOC injector Flag2
2016 04-18 T 20: 16:30.174Z [372C1B70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info] VMotion finished cleaning
2016 04-18 T 20: 16:30.174Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] JrnlEnd: writes active = 0
2016 04-18 T 20: 16:30.174Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] JrnlEnd: finished journal
2016 04-18 T 20: 16:30.175Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] /var/lib/vmware/hostd/journal/1461010590.14 [JrnlFilePersistenceProvider::DeleteJournal] removal.
2016 04-18 T 20: 16:30.175Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] JrnlDelete: deleted journal
2016 04-18 T 20: 16:30.175Z [37280 B 70 'Hbrsvc' verbose] Replicator: Remove only group no entry for VM (id = 2)
2016 04-18 T 20: 16:30.180Z [37501 B 70 verbose opID "Default" = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] AdapterServer: target='vmodl.query.PropertyCollector.Filter:session[574b3c38-6a6b-214e-4bf3-428b10abded9]52760c3e-4722-159c-5c3a-df6eb23ddbbc ", method = 'destroy'
2016 04-18 T 20: 16:30.201Z [372C1B70 verbose opID "Default" = 44d5f9ee user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"
2016 04-18 T 20: 16:30.207Z [372C1B70 verbose 'Local' opID = 44d5f9ee user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."
2016 04-18 T 20: 16:30.223Z [37501 B 70 verbose opID "Default" = 44d5f9ee user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"
2016 04-18 T 20: 16:30.224Z [372C1B70 verbose opID "Default" = 44d5f9ee user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"
2016 04-18 T 20: 16:31.162Z [35981 B 70 verbose 'SoapAdapter"] responded to the request of the State of service
2016 04-18 T 20: 16:31.314Z [35981 B 70 verbose opID 'Default' F2241F42 - 000018 D 1-64-a2-b7 = user = vpxuser] AdapterServer: target ='vim.host.VMotionManager:ha - vmotionmgr ", method ="completeSource"
2016 04-18 T 20: 16:31.314Z [37501 B 70 info 'Vcsvc.VMotion' opID = F2241F42 - 000018 D 1-64-a2-b7 user = vpxuser] CompleteSource [1461010590046389]
2016 04-18 T 20: 16:31.320Z [35981 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"
2016 04-18 T 20: 16:31.326Z [35981 B 70 'Local' verbose opID = 8590ebdf user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."
2016 04-18 T 20: 16:31.340Z [35981 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"
2016 04-18 T 20: 16:31.342Z [37501 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"
2016 04-18 T 20: 16:31.356Z [35981 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] AdapterServer: target ='vim. LicenseManager: ha-license-manager ", method = 'GetLicenses'"
2016 04-18 T 20: 16:31.356Z [35981 B 70 verbose 'Vimsvc.ha - License-Manager' opID = 8590ebdf user = vpxuser] load: existing file loading: /etc/vmware/license.cfg
2016 04-18 T 20: 16:31.371Z [35981 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] ha-license-manager: validate-> valid license found for "VMware ESX Server 5.0" (lastError = 0, desc.) IsValid:Yes)
-----------------------
Hostd.log of the reception host:
-----------------------
2016 04-18 T 20: 16:29.798Z [FFD35B70 'Hostsvc.DvsManager' verbose] called PersistAllDvsInfo
2016 04-18 T 20: 16:30.245Z [29940 B 70 verbose opID "Default" = ac976ee5 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"
2016 04-18 T 20: 16:30.251Z [29940 B 70 'Local' verbose opID = ac976ee5 user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."
2016 04-18 T 20: 16:30.265Z [29940 B 70 verbose opID "Default" = ac976ee5 user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"
2016 04-18 T 20: 16:30.267Z [29940 B 70 verbose opID "Default" = ac976ee5 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"
2016 04-18 T 20: 16:31.412Z [2BAC2B70 verbose opID "Default" = F2241F42 - 000018 D 1-64-a2-e5 user = vpxuser] AdapterServer: target ='vim.host.VMotionManager:ha - vmotionmgr ", method ="completeDestination"
2016 04-18 T 20: 16:31.412Z [2BAC2B70 info 'Vcsvc.VMotion' opID = F2241F42 - 000018 D 1-64-a2-e5 user = vpxuser] CompleteDestination [1461010590046389]
2016 04-18 T 20: 16:31.412Z [2BAC2B70 WARNING opID "Vcsvc.VMotion" = F2241F42 - 000018 D 1-64-a2-e5 user = vpxuser] CompleteDestination: card not found
2016 04-18 T 20: 16:31.417Z [29940 B 70 verbose opID "Default" = fa72f2f7 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"
2016 04-18 T 20: 16:31.424Z [29940 B 70 'Local' verbose opID = fa72f2f7 user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."
2016 04-18 T 20: 16:31.439Z [FFD35B70 verbose opID "Default" = fa72f2f7 user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"
2016 04-18 T 20: 16:31.441Z [29940 B 70 verbose opID "Default" = fa72f2f7 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"
Using IPv6 on new hosts? If so, try disabling:
2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.eduvmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare (1461010590046389): sending "to" srcIp = 10.10.6.108 supporting = 10.10.6.73, type = 1, encrypted = false, remoteThumbprint = 28, 5 C: C3:9 C: 3E:BA:79:EA:B5:19:CC:A9:36:34:C1:10:48:46:F0:0E
2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = srcLoggingIp
2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = dstLoggingIp
2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: srcMgmtIp = 10.10.6.108
2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: dstMgmtIp = 2620:91:0:96:73
-
VM Converter 5.5 general system error has occurred
Hello
I have a problem using vm 5.5 converter to convert a physical Windows 2003 SP2 machine in virtual machine. The vm converter is installed on the computer that I want to convert. When I run the conversion I'll get an error a general system error occurred: unknown internal error.
I tried restarting the server and restart the conversion, but it did not work.
The log file is attached.
Hello
I think the upgrade to R2 is a drastic measure and you should consider the impact before making the decision to do so. I don't recommend it at this point.
You have multiple system drives that you want to convert? (C:\, D:\, etc.) ? If so, try to convert the C:\ just to see if the converter process works. I don't know what role the server has, but if other drives are just you might plan to the image of the disc or copy of the separate data later (if it works).
I might suggest if the above does not work, we can clean all the VM converter from your source machine files manually, restart the server and try the process 5.1 new converter itself. (Something could be let go 5.5 installation or now stuck).
Good luck trying that!
Ryan
-
VM does not start: general system error
Hello
I have run 4 VM via vmware server 2 on a Windows Server 2008 R2 host.
Yesterday for no reason like my 50 GB of free space on the partition where the virtual machine is stored suddenly disappeared. Several of the files in the directories VM had balooned to new heights. My virtual machines have been crushed this morning.
Nevertheless, I moved 1 VM to a fallback server, clear up a lot of space.
Now, all but 1 of my VM will start. I get an error:
Power on Virtual Machine did not finish: a general system error occurred: unable to connect to the virtual machine
Windows Journal says: unable to connect to VMX: E:\Virtual_Machines\servername\servername.vmx
I'm a little uncertain as to where are my logs from VMware, and cannot can't find a deinitive answer to this.
I have a suspicion that I am maybe more space disk on the Windows Partition in the virtual machine itself, is it possible? That would force the latter to start anymore?
Any help is appreciated. I scoured the net to find answers, but found little, and what I had to do with Linux issues, that I don't have.
'Remove' will leave your VM to the point that it is now by the merger of the snapshot file and the disk basic together, which is the intensive part of the disc. After the end, you will have some snapshots (Server 2.x allows only a single shot) and therefore no possibility to return to when the snapshot was taken originally.
It seems that the disk subsystem should be at the height.
Could you temporarily attach a (slow) external network or USB device and copy all the vmdk files just in case something bad happens? Don't mean to scare you - it will almost certainly ok, but only in the case (in function of the importance of the data in the virtual disk are, of course).
-
After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning
Hello
If you use Norton, which could interfere with the restoration of the system.
Disable Norton while doing your system restore.
See you soon.
-
After download, ' an error occurred during the preparation of the installation.
Ok. I'm not very good with computers, so I'm going to do my best here:
I downloaded El Capitan last night, did the installation and rebooted. The questions endless gray on the screen. Relaunched in LANDAU several times; Install still 'stuck' 31 minutes downloading - every time. Restarted in safe mode; install 'stuck' 24 minutes - every time. I did the safe mode--> reinstalling OS X, which then made me download 'additional components' and then restarted automatically. That put me right back to get 'stuck' to 24 minutes Setup.
I could then go back to my previous OS X 10.7.5 then in safe mode (I don't remember how). I have so found the OS X 10.11 El Capitan install file in my applications folder, tried running the installer again and got "an error occurred during the preparation of the installation. Try to run the installation again. "I tried several times over with no different results. I checked the date in the terminal; It is correct. So I deleted the application (ten hours later!). Re-uploaded El Capitan on the App Store on the day the next day and just tried to run the installation program and still get "an error occurred during the preparation of the installation. Try to run the installation again. »
I do not have a "clean"... installation I didn't really know what it was before all these questions. All my stuff is backed up via Time Machine on an external hard drive that...
Any advice would be so appreciated. I am at a loss at this point.
Thank you!
So, everything was OK, two days ago? On Lion OS?
Of course, there was a hiccup during the installation. you said "makes installation and restarted."
During the installation (Setup in the applications folder), it restarts after installation, it installs effectively while restarting. So I guess the installation never finished, maybe because you the restarted.
This means that your operating system 'old' is always on it, but not completely healthy because of the "accidents" caused by ElCapitan failure install.
So I propose:
Connect your Time Machine disk (when not connected), start in the RecoveryPartition Time Machine restore, choose a date before that you tried to install ElCapitan, let him finish completely, it restarts automatically (I think). Then you are back where you started.
-
I have a Dell XPS-8700 running Windows 7. I bought the Dell Backup and Recovery Premium Edition.
I was able to create a backup bootable (hot spare), and I can create a backup of data on my external hard drive. However, whenever I try to create a backup on my external hard drive system, after about three seconds in the process, he returned: "an error occurred during the creation of the backup of the system.
How can I create a backup of the system? Why I get this error?
Thanks for all the info. My situation sounds very similar to yours.
I removed using Add/REMOVE programs in the control panel DBR and he removed cleanly.
V1.7.1.2 downloaded and executed new facility.
When I ran, it was my premium license key so he had yet to register and was not removed by uninstall.
As before, Rescue Disk ran and installed the new partition (DBR_BOOT) on WD Passport.
However, backup system immediately stopped with disconnected, missing target location or full. Tried several times...
In any case, sounds like you have solved your problem, so you like OP should this brand this post/thread as answered. I will continue to post on my other thread.
-
Hi all
I use version 2.1 of WINPE. It works with ipv4 network services.
I have a "Windows2008R2" machine in my network. In this server I am running a DHCPv6 server in my network. This server is the allocation of IPv6 addresses to all computers that have the OS Vista and Win7, etc (for vista and above).
But I'm not able to receive the ipv6 address for winpe2.1 pc which is my test pc.
What are the basic things I should do to receive the IPv6 ip address.
If you please suggest me that how I can solve this problem.
I tried to have run the command as "ipconfig /renew6" but he throwed an error
An error occurred during the renewal of the Loopback Pseudo-Interface 1: the system cannot find the specified file.
It is very urgent for me. I ask if anyone knows the steps so that the WINPE2.1 system get IPV6 will be appreciated.
Thank you very much.
Andy
http://www.Microsoft.com/windowsserver2008/en/us/community.aspx
They will help you in the community of Windows Server above with your questions.
See you soon.
Mick Murphy - Microsoft partner
-
P2V fails with "error: an error occurred during the reconfiguration.
Hi, we're starting everything just to P2V of our servers and start easy (I thought) qith our WSUS server. Every time I start the job fails on 98% with the error "error: an error occurred during the reconfiguration. I tried to re-boot, I tried to tell the wizard not to include a disk which is compressed. and I tried making minimal changes to the settings all with the same error...
I don't know what to try next...
I have attached the diagnostic logs in the hope that some kind soul can point me in the right direction...
Thank you very much
Matt
Have you tried to remove the/3 GB switch to the boot.ini file?
-
I've been a fight 2 days now trying to improve my iMac 21.5 2009 end of Mavericks in El Capitan, but as the installation is about to be launched I get this message "an error occurred during the preparation of the installation. Try running the application again".
Here is a list of all the things I've tried:
Running the application again;
Move the installation to another folder application;
Control date & time and it was already correct;
Do the installation in safe mode;
Installation of the upgrade of another user I created only for that purpose;
The computer restarts and I tried install the upgrade several times;
And, to be sure that the installation application was not corrupted I made a copy of it on an external HD and tried to install it on my 2011 MacBook Air and it worked (I didn't install because I have El Capitan installed on my MacBook).
Well, I don't know what else can be done, and I'd rather not have to completely restore my iMac.
Please try installing again after taking each of these steps you have already taken it.
Step 1
Reset the PRAM from your computer.
Step 2
If possible, set the clock system as indicated here. If you can only boot into recovery mode, see below.
In the OS X Utilities screen, select get online help. Safari will launch. While in recovery, you will have no access to your bookmarks or history. Load this web page.
Triple-click anywhere in the line below to select:
date 0801000014
Copy the selected text in the Clipboard by pressing Control-C key combination.
Quit Safari. You go back to the OS X Utilities screen.
Select
Utilities ▹ Terminal
in the menu bar. It will open a Terminal window. Paste in the window by pressing the command-V key combination.
Wait for a new line ending with a dollar sign ($) below what you entered. If it does not appear, press return.
Quit the Terminal to return to the main screen.
Step 3
If your model has replaceable memory by the user and you have upgraded modules of memory, reinstall the original memory and see if there is any improvement. Make sure not to touch the Gold contacts. Clean them with a mild solvent such as rubbing alcohol. Spare memory must exactly match the technical specifications of the machine. Do not install more memory to the maximum value specified, even if a seller of RAM, or someone else, said you that it will work.
Step 4
Back up the data at least two different storage devices, if you haven't done so already. A backup is not enough to be sure. Backups are possible with Time Machine or disk utility. Preferably both.
Erase and install OS X. This operation will destroy all the data on the boot volume, if you be better be sure backups.
Maybe you are looking for
-
Button "Home" is on the wrong side of the toolbar in Firefox 4.0
In the latest version of Firefox, the 'Home' button has been moved to the right end of the toolbar. It is very incinvenient and boring at best. Is there a way to get him back to the side left where he was before?
-
Satellite Pro A200 (PSAF4A) - update CPU and chipset
Hello I have a Satellite Pro A200 (PSAF4A) with a processor Intel Celeron M 540 (1.86 GHz) and a Mobile Intel (r) 965 Express Chipset Family.I upgraded the RAM, but it's just not enough performance for me as its limited to 2 GB.I know that Toshiba wi
-
Someone is using my email to send unexpected messages
Someone is using my computer as a slave and is emails anywhere in the world. What are my options to remove this invader. I ran several different scans, but it is still there. * original title - computer being used as a slave *.
-
How can I change my password I am the system administrator?
I am the administrator and if I want to change my password how to do that. He says that I have to put in a disc? I don't know what that means? to connect, I have to type a password and the need to change
-
After the upgrade to Windows 7, I lost access to all components of the installation of HP programs. How can I get back them?