A hard time with the new synchronization

Similar Questions

• Installed new HARD drive with the new installation of XP, old HDD ShowAs saw as the active partition, how to change this?

  I installed a new HARD drive with a new installation of Windows XP Edition family. I want to keep the old HDD and reformat the drive, but I can't because the second HDD is listed as active in the management of the computer. Why? It's not the drive that contains the operating system (Windows XP) that is initialized from.  I put the BIOS such that the new HARD drive is the boot drive. The old HDD has Windows XP on it, but isn't the startup disk. I just don't understand.
  If only the new HARD drive is installed, the computer management doesn't show that it or any other of its partitions are the active partition (C drive is listed as the system partition, of course).

  How can I get an active partition and no active partition when the new HARD drive is installed on a HARD drive that is not the boot drive, when I have two hard drives installed?

  In case it is necessary, the new HARD drive is a SATA and the old HARD drive is IDE with the cavaliers as a slave.

  The system partition is the Active partition. The system volume contains the system files needed to start Windows, Windows XP, these system files are:

  NTLDR
  Boot.ini
  NTDETECT.COM
  Ntbootdd.sys (present/used only with older SCSI controllers)

  Windows files are not necessarily on the system volume, they can reside on another volume, when on a different volume this volume holding Windows files is called the boot volume.

  When you install Windows on a computer, playing a mixture of IDE and SATA setup discs tends to favor with IDE drives on SATA drives and tends to use the IDE drive to house the system partition, (even if Windows is installed on a different drive).

  Running the command SYSTEM SET at a command prompt may shed some light on the problem...

  John

• Pavilion dv6t-2000: replacing old HARD disk with the new SDS and loading the OS with 1 & 2 recovery discs fails

  I just successfully replace the SSD, exchanging an old 250 GB HDD with a new 250 GB HARD drive.

  I started with success, inserted the disc of recovery by the instructions on the screen. Disc 1 and rendered, it succeeded.  When you are prompted, load disc 2, which was also successful.  When asked, in charge of the "application and driver recovery CD" and continued.

  At this point the computer restarted several times, as he said it would be completion of installation of all elements.  Then he came with a message that says: the recovery attempt failed. Select one of the following buttons.

  "Save Log"; 'Details '; 'Retry '.

  Details says:

  ChkErrBB.CMD: Detects an error in the PININST_BBV.

  ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log

  Any suggestions here?

  I update my BIOS before proceeding with the Exchange.

  I found the solution to this problem was already answered here:

  http://h30434.www3.HP.com/T5/notebook-recovery/quot-detect-some-error-during-PININST-BBV-quot/TD-p/2593075

  Thank you!

• proplems with the new synchronization

  Hello
  I have been using the synchronization of the former and I have my key but all of a sudden, I have to format my pc before upgrading to the new sync
  now, I installed the new version and made a new account but I need to restore my settings from my old sync

  How to make

  Concerning

  You need to access your old account for synchronization.

  Enter all the details like the name of the account (email address) and password and the key to timing of 26 characters manually to connect to an account existing synchronization.

  1. Open "Firefox > Set Up Sync...". «or "tools > Options > synchronization > configure Firefox sync»
  2. Click on "I have an account".

  This brings you to the window 'pair device '.

  • Click on 'I don't have the camera with me' down to manually enter account settings (email, password, key synchronization).

• new hard drive with the new computer

  I'm going on a trip and bought a macbook air which I think I installed LR on.  Now, I want to bring a new hard drive on the trip and I would like to first of all a new catalog on a new hard drive.  How to create a new catalog on a mac formatted hard drive?

  Connect your new drive hard (if external) for the Macbook Air

  Launch Lightroom and go to the menu bar and choose:

  File > new catalog

  Navigate to the new hard drive and choose a new catalog name for example MyCatalog2 or what you prefer.

  Then click 'create '.

  When the empty catalog launches, you are ready to import pictures.

• Installation of Win XP on a new hard drive with the new motherboard

  I have currently baught a new motherboard and hard drive.  I tried to load XP on a new 250 GB Western Digital SATA 2.0.  When you run the Windows Setup program formats the hard disk to NTFS and then said the system will restart and launch the installation.  Upon reboot, new XP starts the Setup program and wants to format the drive again.  It shows her format partition and when I go to format again once it is said that in doing so, I would be deleting files from windows that have already been installed on the system.  Why does this happen?

  Set the BIOS for SATA "Native IDE" then I deleted the partition.  RELOADED windows and the problem has been resolved.  Thanks for the help.

• A hard time with the drivers for Vista Home Premium computer laptop computer network with Windows 7

  OK, I've read tons of information on that and I'm stumped.  I have an Epson Stylus CX6600 all-in-one printer.  I have my Windows vista Home premium networking with my 64-bit Windows 7 computer.  I go to the step where the machine Vista attempts to connect to the printer on the network, then it asks a driver.  The driver file is already on the vista machine.  I installed the latest drivers from Microsoft and epson on the Windows 7 machine and he always asks a driver.  Can someone point me to the exact file name and the location of the driver in the vista vista machine so I can simply copy and point to it my windows machine 7.  I did the updates from Microsoft to get all the latest drivers.  Thank you.

  You do not install the Vista drivers on Windows 7 computer.

  Repost nicely in the Forums of Networling, as it is a matter of networking:

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  Vista Networking forum at the link above.

  http://social.answers.Microsoft.com/forums/en-us/w7network/threads?filter=answered

  Windows 7 networking forum.

  See you soon.

  Mick Murphy - Microsoft partner

• In the new synchronization is the option "overwrite local/remote data" driveway?

  I noticed that I can't decide if the synchronization must be connected server to the client, the client to the server or two-way. And I know it was an option (a must) with the previous version of synchronization (if I remember correctly 3 choices were available: download, upload and bidirectional). He is really gone? Maybe I just can't find it...

  If it is gone I guess this means that with the new synchronization, both sets of data are merged with no other option. If this is the case it is terrible news, as in the case of data 'settings' and even ' subject: config changes ", there is no way to merge this type of often contradictory data. And I certainly don't want to make a mess on my favorites that are mostly the same but a lot differently arranged, etc. renamed the 2 computers. A merger will duplicate more and replant those I had thrown and do not want. 'Data passwords' will also be a mess, "modules data" will be easy to fix manually.

  My setup is on computer A, I did a new install of Firefox with new settings, modules, bookmarks, passwords, etc... What I want is to synchronize computer B to this same account without it downloading THE data on the server synchronization. As I used to be able to do with the previous synchronization.

  If there is no way to do that I will have more than just delete my entire firefox profile on computer B (rmdir home/user/.mozilla), so I contaminate with stale data synchronization server. I want to avoid that, as it's a pain. There are a large number of settings, that I'll have to manually reconfigure as they are not synchronized among other reasons.

  If it is indeed gone, may I ask why the choice of any feature? Was it too bug?

  The user interface is not here now.

  The simplest thing to do: open the new profile, delete bookmarks stocks, clear the history you want to get rid of and remove saved passwords. If you want to also sync prefs and want to be completely sure that they are clear, remove the directory of the profile prefs.js.

  Voila: a wiping profile.

  Delete the contents of the directory of profile may or may not work; I do not recommend try you it.

• Im trying to sinc my email contacts from my iphone to my new computerhow I can do I pluged my phone in my computer and he asked to do it but sinc everthing contacts im having a hard time with windows 10 is for the younger generation

  I am trying to sync my contacts from my iPhone to my new computer email how I do I plugged my phone into my computer and he asked to do everything but synchronize the contacts that I have a hard time with 10 windows, that's for the younger generation

  If you synchronize contacts using iCloud, you cannot synchronize them in iTunes. More information would be useful.

• I have a hard time with my card the sound blaster z to synchronize with cs6. If someone can share with me

  I'm having a difficult time with Adobe CS6 synchronization upward with my sound card. Other applications and latency settings are difficult right now. I had 3.0, but my Windows 7 computer is now "deceased". Help, please.

  I agree with everything that comes to say Steve but to try to get you while you're shopping for an audio interface more suited for his work as a doorstop, try the following:

  Go to the windows of his control panel and make sure the SB card is enabled by default on the tabs of the recording and playback.  In the advanced for both menu, affect the bitrate of depth and sample 16/44 100 (CD) or 16/48 000 (video) depending on what suits you best.  Note that your SB card only works in native mode to 16/48 000 so anything else implies a conversion that hides the card on your part.

  Go to the control panel Windows and, under the audio section, cut all the system sounds (because they can hijack your sound card).  Close all other applications that may want to use the card (internet for example).

  In hearing, go to Edition/Preferences/Audio Hardware.  Set the class of device to Mrs on the drop down menus, set the default input and default output to your Soundblaster.  On the master clock set for SB output (it will probably default).  Set about 200ms latency (you need to maybe increase it later if your playback stutters - or you can try to decrease until you get stuttering, then take up a little bit.  Set the sample rate to what you have selected on the sound control panel.

  The Soundblaster will be probably installed its own menu of control.  Go to it and select Mic or Line according to the entry and all that you need for the output.  I can't be more precise than SB continue to change what they call things.

  I hope that'll get you even if this isn't the best compromise for quality and latency.

• Windows 8 - recovery disks do not work with the new hard drive

  My HDD had major errors of io only 1 month laptop warranty. I can't clone the original disc, its dead. I'm relatively new to Win8 but I bought the factory HP recovery disks for my model and have tried repeatedly to restore the OS win8 without success even after support technical advice ofHP and several friends with more experience than me (and I got an A + cert for more than a decade)-I have no idea why he keeps fails. I ordered another set of discs and tried another new hard drive. The log shows all the hardware in the way and a sysprep not found error at the end. What Miss me?

  Problem solved! After another half-dozen recovery more attempts and lose more money on a new HP certified hard drive with the correct part number, I decided to give up Windows 8 and turn this laptop in a Hackintosh, I now on Mac OS X!  Microsoft has gone too far now, only not with the security of windows, instead of trying to make sure they get every penny they can from each PC running windows. His self defeat really. Those who cannot or do not want to pay the cost will simply find an alternative. I'm just tired of the headaches and of constantly having to spend my precious time proving that I have a valid OS license for every computer that I've updated or repair. Forcing people to buy the same item several times is aggravating and false. Sorry, just fan frustration.

• Satellite L655-149: recovery does not work with the new HARD drive

  Satellite L655-149

  PSK1JE

  Windows 7 Home Premium 64-bit (factory installed)

  Recovery of HARD drive on drive D (factory installed)

  My old toshiba (MK5065GSX) 500 GB hard drive became too noisy and slow so I plan to replace it with the new drive hard toshiba (MK5059GSXP) 500 GB.

  I created USB Flash HARD drive recovery.
  When the installation is complete and Setup installs devices an error "Windows Setup couldn't configure windows to run on a hardware on this computer.

  I've updated the bios
  I loaded by default in the bios
  I changed the SATA AHCI mode to compatibility IDLE

  assistance in this regard will be highly appreciated

  Set the BIOS to the default settings and try again.

  With the installation of recovery, there is a problem: either it works or not. If this isn't the case, bad luck and the only solution for you is to order original Toshiba recovery DVD on https://backupmedia.toshiba.eu/landing.aspx

  By the way: do you use that stick of recovery for the first time?

• Recovery disks do not work with the new hard drive?

  Hello, everyone.

  I have a laptop HP (pavilion dv7-1245dx) and the hard drive is dead. I had never gotten to burn my recovery disks, so I ordered new ones from HP. When I installed the new hard drive and popped in the disk to reinstall the operating system, it gave me the error message:

  "This PC is not supported by the system recovery discs. You can continue to recover this system with these discs. »

  Error code: 0100-30 FC-3602-3603

  The original hard drive was a Hitachi, 320 GB SATA

  The new hard drive is a WD 500 GB SATA

  Any assistance anyone can give would be great. :]

  Thank you for your time,

  C

  EDIT: Trying to recover a Vista operating system

  For anyone who has the same problem, I found a solution. I cloned the original hard drive using the Clonezilla fallback option. After using Clonezilla to image on the new hard disk, the partition which held that most of the data of the laptop is not mountable, however the partition containing the restore partition was a perfect copy. I turned on the computer, hit escape to access the menu (for a list of options such as boot order, etc, which included an option for recovery), and then choose recovery option. While the recovery discs, I received from HP refused to work with the new hard drive, the Vista restored cloned recovery partition without flaw.

• How to copy a folder to an external hard drive with the same file on it and have it just add new files instead of replace all old already on there, as well as to add new?

  I want to copy a folder to an external hard drive with the file already on it and not having to replace all the files each time. I just want to click and drag the folder to the external hard drive and have it add new files I've added in the folder on my pc over time on the external hard drive. It's annoying to have to replace alllll the files each time.

  Thank you!

  A simple way is to use the second copy of Centered.com software. It is reasonably priced and will do exactly what you want. MS - MVP - Elephant Boy computers - don't panic!

• Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

  Question
  Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

  Firefox 9 is Compatible with Norton 2011, 2012, 360 v5. See:

  • http://community.Norton.com/T5/Norton-Internet-security-Norton/Firefox-9-support-for-Norton-toolbar/TD-p/615563