A link to a relative path in FLASH CS6
I'm doing a site for a school project. I'm afraid once I pass the next, someone will move my files and screw up my FLV links. How can I go on a link of my videos with a relative path for files FLV actually plays?
This url is incorrect.
But assuming that it should be http://www.sitename.com/MoralityPlay/introVideoWithInfographic.flv
and assuming that your html and swf are int http://www.sitename.com/MoralityPlay
the relative path to your video is introVideoWithInfographic.flv
If your html and swf are in the folder root of http://www.sitename.com
the relative path to your video is MoralityPlay/introVideoWithInfographic.flv
Tags: Adobe Animate
Similar Questions
-
Creating a link to a relative path
I hope someone can help me here.
I use Robohelp 6.0 and output in a CHM (Robohtml) file. I have a file .htm separated with 3 associated files (.flv (flash video), .js and .swf (Controller) or .xml (settings) file). This is our library of training in video format which is embedded in the .htm file. It was made using Camtasia. What I want to do is one of the following:
1. create a relative link in the file .chm for the .htm file that is outside of the project.
2. everything in the baggage files and run it from inside the .chm file.
My results were as follows:
1. no matter what I try, I can't seem to access the .htm since the release of Robohelp file using a relative link. I made sure that all the files are in one directory where the chm file, so I don't know the paths are correct. It's as if Robohelp can only create links to absolute paths? Is this really the case? In addition, I don't have the files to include in the project. I just need to access the .htm file relatively. The coding is in the .htm file to play movies.
2. any investment in the baggage files lets me run the htm file, but the .flv and .swf files are not displayed in the html window. No matter how I cut it, I can't get these video files to load. As a side note, I can integrate files .swf in Robohelp without a hitch, but this training library has several videos and a table of contents and others and is 250 MB as a .swf file. But as a .flv file, it is only 25 MB. So of course, I prefer to use the .flv file.
Thanks in advance for your help.
Rob
Hi, Rob.
> Create a relative link of the file .chm to the .htm file that is outside of the project.
Microsoft's HTML Help documentation includes a script for exactly that. See:
http://msdn.Microsoft.com/en-us/library/ms644690 (vs.85) .aspx
And see also:
http://helpware.NET/far/far_faq.htm#externalfile
Pete
-
link with the relative path includes the root folder
I hope someone can help me. When I convert a Word to PDF file with a path relative to another document, a reason any Acrobat includes the directory root with the path if the link does not work. Even when I try and change the link using Acrobat Pro and save the document, the system adds the default root directory. What is happening with this?
example:
Directory with the file/subdirectory with file/sup under directory with the file / / my document.pfs
site to register:
C: / / my documents /.
Directory with the file/subdirectory with file/sup under directory with the file / / my document.pfs
solved my problem. I removed the links in the word document and then created in Acrobat. It worked.
-
I created a PDF file for presentation to a client.
There are other PDFs to be accessible during the presentation at certain points. I put the 'Link To A File' links to the right places in the main PDF file and stressed these secondary PDF.
I've included with the main PDF file PDF secondary. Everything is in a single folder with no subdirectory.
So when I send my client, the file zipped with all PDF files, why is that when my client is by clicking on the links in the main PDF file it is looking for these secondary PDF on MY hard drive!
I hunted a solution for using relative paths, but Acrobat is emphasizing the ABSOLUTE use, and what he asks me gene huge with my client because I can't make it work for him.
See you soon
The path is not absolute, even if it looks like that. You can easily test and see for yourself. Move the file to another folder, and you will see that the path of the link changes with it.
The problem is probably caused by viewing the file on an iPad. The file system on mobile devices is quite different from 'normal' computers, so I'm not surprised that the links to other files work. In addition, it depends a lot on what app is used, but I think that in this case, it would not matter much.
-
Link to files via the relative path?
It seems that Captivate is only able to connect to external files via absolute links. In other words, when I create a click box that opens a file and select a file that is located on my development machine, the project will always look this file on my hard drive, even once it is posted on the Web. It's extremely frustrating, and I have not found a work around.
Please help me identify a way to bind using a relative path. In other words, the project will solve it is the current residence and search for content in the directory, it lies in or specified directories under this location. It is the only way that you can create a project that can run successfully during the validation. Captivate already done this, when you create a click box that opens another project, so there MUST be a way to do when opening project files!
Help, please!
Thank you
Dan RobertsYou, Mr President, is a scholar and a gentleman!
According to the agreements that you have described, I was able to create workable links. This should be widely published, I'm sure that many other authors is on the same problem.
Note to Adobe: the ability to create relative links should be inside the product option, as in most of the other products I've used.
-
Hello
How can I configure the AI CC document-relative paths? For example, if I have a folder like structure
.../Project
.../Project/Source-images
.../Project/AI-scripts
.../Project/actual-AI-files
you get...
so now if I save the project on an external hard drive folder or anywhere else where I have to update the paths for all my documents in/Project/actual-I-files that are related to the files/Project/Source-images and/Project/HAVE-scripts, although the relative path remain the same. Can I use relative instead paths?
Thank you
Unfortunately you can not do.
Only chance is to have all the files related to the same level as the file HAVE (no subfolders)
-
the frame in the frameset is not the relative path correctly
http://www.autogamma.com/FastSP/catindex.html
Click on 'PUMP LAVACRISTALLI' > "Quick Codice" > "PL100.
images do not work
In IE and Chrome images work fineThe frame with PL100,... link to "pompe\PL100.html",...
Target is the frame named "MAIN".
In this context, the relative address is lost: the frame does not take the correct relative path, with a new subdirectory "pump".
Path of the images remain.These links have the backslashes instead of slahes forward:
<body><center><font size=2>CODICI FAST</font><br> <a href='pompe\PL100.html' target='MAIN'><font size=2>PL 100</font></a><br> <a href='pompe\PL101.html' target='MAIN'><font size=2>PL 101</font></a><br> <a href='pompe\PL102.html' target='MAIN'><font size=2>PL 102</font></a><br> <a href='pompe\PL103.html' target='MAIN'><font size=2>PL 103</font></a><br> <a href='pompe\PL104.html' target='MAIN'><font size=2>PL 104</font></a><br> <a href='pompe\PL105.html' target='MAIN'><font size=2>PL 105</font></a><br>
-
Urgent: how to create a shortcut with a relative path?
I put a set of files and folders nested on a server on a network location. (Use of office machines Vista; I don't know that the server is running. The files are a text file and two Office 2007 files). Users will copy this set-up files on their computer (there is a program of VBA macro in a Word document, they need). They need tomorrow (Friday) and the shortcut path gives me fits!
The hierarchy looks like:
MainDir
File.txt
SubDir1
Shortcut to the Word file
SubDir2
Word file
Excel fileI don't think even the paths associated with the shortcut until I looked a little deeper. Because I put all the files and folders together on my computer, when I did a drag - move in the folder on the server, the target properties and start in the shortcut always pointed at my computer! So now, I'm afraid that a user copy this on their machine will have a shortcut that points to ~ my ~ computer, instead of the file on their computer.
I deleted the shortcut located on the server and creates a new one from the Word file in the directory on the server. Better - I think - but it still points to the location of the server. And it is even more likely that, when the user opens the shortcut, it will try to open the file on the server, vice the file on their computer.
How can I create a shortcut to this Word file that will pick up the relative path from around where to reside? I can just click > properties and change the target and start in paths? Or do I need a VBScript or VBA?
I have to get this done fast! A kick - in the right direction is greatly appreciated.
Ed
Hi Ed,
It is not possible to create a shortcut with a relative path.
You can try the following allows to bypass and check if it helps:
Create a shortcut to cmd.exe running the start command to open the current directory. Then set the MDC in the
The shortcut properties.
a. make a new shortcut to: cmd.exe /c start.
b. now right-click on it and get the properties of the shortcut (shortcut tab).
c. the shortened full path must have been set to this:
%windir%\system32\CMD.exe /c start.
d. set the directory of "start in" (i.e. DLG) to be a relative path:
(Example for a shortcut on the desktop)
...\SendTo
e. click on "change icon...". "and set" look for icons in this file: "to: %SystemRoot%\system32\SHELL32.dll and press ENTER.
Standard folder icon will probably be in the lower right.
f. now you can copy this file and simply change the "start in:" to make new related shortcuts directory.
NOTE: The above steps are just an example, so try this at your own risk. And check if it works.
You can also read the following article and check:
Folder redirection fails when you specify the mapped network drive or the Environment Variable
http://support.Microsoft.com/kb/321805
You can check out the following link and also post your request in the Technet forum for further assistance:
http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads
Hope this information is useful.
-
Relative path of Windows shortcut file
Hello
I have the complete file of PDFs (hundreds of them) and I need them zip. I need also make a shortcut of one of these pdf files in this zip and rename it, so it is recognizable among others. But when I do a shortcut, zip of PDFs with the shortcut and delete the original files - inside the zip link stops working.
I have a question if I can have this shortcut in the relative path, so it is not dependent on the original data, and if it can work inside this zip (as well as inside the folder) any absolute path is.
Can someone help me? Is it still possible?
Thank you very much
Nobody has never reported a method to create shortcuts on Windows. A lot of people seems to have attempted; If you are looking for relative shortcut in this forum you will see other threads on the subject.
-
Relative path does not work in Captivate 9
Hello
I use the relative path (docs/document.pdf) to open documents of reference such as the PDF files in a new window in my captivate projects and they always worked until I upgraded to 9 Captivate. The path doesn't work anymore and opens a web browser window by default instead. Not sure if I'm missing something. The "docs" folder to call the PDF document found in the published folders (see image below). I appreciate all the advice.
Well, it's been 4 days and I did not receive a response. I contacted support and they gave me the following instructions, in the case if you are interested:
In order to link the document, select the action "Open url or file" and in the path, just put the name of the document [0.pdf]. Make sure that the document is in the published folder. So the lesson learned, keep documents directly in the published folder, all the subfolders [docs/document.pdf].
-
Changes of relative path to absolute path when creating a child of the model
Hello
I found very useful model Dreamweaver features and was doing well until I created a child by selecting the Site template and the template file in the new Document dialog box to discover the following problem:
In the template file, a path appears as follows:
"" < link rel = "stylesheet" type = "text/css" href = ".. /.. / common/css/all.css">
However, in the case of the child, the same path has changed to the following:
"< link rel ="stylesheet"type =" text/css" href="file:///D|/xampp/htdocs/xyz.com/common/css/all.css ">
I want to retain the same relative path in the child's file. Please advise me how it can be maintained.
Thanks as always,
EAD
In the template file, a path appears as follows:
" href =".. /.. / common/css/all.css '> '.
It is not possible for a link appears like this in your model. This is because the template MUST be in the templates folder, which is at the root of the site. A single deep folder level, it is only possible to go UP one level to look for any other file/folder in the site. But your link says to go up TWO levels! Something wrong here. Is your template in the Templates folder? Is - this folder at the root of the site?
Furthermore, Ben's response is quite accurate. Given that DW does not know when your page of the child should be registered, it cannot create the link until it is saved.
-
Relative paths for assets with several users of Muse
I have created a shared folder in Dropbox that allows different people with responsibility for editing my site, each with a licensed copy of Muse, to access the files of Muse. All the assets required for the sitting next site or in a subdirectory under the main file of the Muse.
But because the literal path for the dropbox folder (or any other shared folder, I guess) contains his username, and because the link point to the shared folder can be arranged differently on their machine (some people mount dropbox in 'Documents', others also), the literal path to the file to Muse is distinguished by the user. I guess this is true even on the same computer with different users.
As a result of these literal paths differ, at the opening of the Muse site, even when all assets required by the site are in the same folder or subfolder as master of muse, each user is asked to re-edit the link active whenever they open it after someone else has and can of the moment of their side.
There is no way to have Muse look relative paths instead of the railways literal to avoid this?
Unfortunately, it is not possible to watch right now the relative paths instead of literal. It's a good request well and I'll take it to the top with the development team!
Muse auto-liens all assets after the first warning of dialogue, however, correct? And out of curiosity, how this multi-user workflow going for you?
-
Using relative path to file/ftp adapter
Hi all
How to have a relative path for the file / ftp adapter operation in/out?
Example: Consider $ORA_HOME = / home/oracle-> this environment variable can be different on different machines
I want to drop a file in $ORA_HOME/Folder1/Folder2 (or query to a file).
< partnerLinkBinding name = "FTP" >
< property name = "wsdlLocation" > FTP.wsdl < / property >
< property name = 'out_dir' type = "LogicalDirectory" >what I write here? < / property >
< property name = "retryInterval" > 60 < / property >
< / partnerLinkBinding >
If I can't configure this in the section "links" partner or agent link activation, otherwise, how to achieve this?
I use version 10.1.3. *.
Thanks in advance.
Roshan.You can achieve by using the deployment scripts if the directory evolves based on the environment
If you want to change running you can use the properties of jca to set using the variables during execution.Kind regards
Ajay -
I have built several simulations, Captivate 2 and only just discovered that my links to external files are not related.
I created links with buttons. I fixed them to open a URL or file on success. I then went through to the files I want to link to. The files are PDF files and html files that launch the other captivate published files.
I saw that an absolute path has been inserted, but I hoped (in vain) that it could be converted into a relative when published path as long as I kept the same folder structure for my source and published files.
Is it possible to implement a relative path in Captivate 2?
Thank you.
Grace D
Hi Grace
In General, the best way to create and ensure a relative path is to simply type the name of the file that you are linking. Never use a browse button to navigate to a file. By manually typing the name of the file, there is no way for Captivate know the way. Thus, it creates and maintains a relative path.
See you soon... Rick
Useful and practical links
Captivate wish form/Bug report form
-
Open the other project - relative path
I hate to keep asking this question... but someone came up with a viable solution for the opening of another project in Captivate 4 using a relative path? I see this discussion start and stop at various locations... but it never seems to be an answer that works. I don't quite understand why Adobe has taken this feature of this version... like he did the almost useless product for me. I need to be able to relate a project to another somehow, and I don't know the absolute path is going to be when I create the training.
I don't know where else to turn for help on this. Anyone?
Thank you.
Margin
Hello
There are many factors at play here.
Are you sure that Flash security is not hinder you?
Click here for help with security setting
See you soon... Rick
Maybe you are looking for
-
My x 360 spectrum stops to get into sleep after a few hours of normal behavior. In other words, when the computer is started first, he put on standby and Hibernate mode then normally after the specified idle period. It can then be woken up and work
-
Prohibit the 'paste' to an input string
Hello How can I disable the function 'paste' in an input string? I'm using Labview 8.5.1. Thank you.
-
Network cannot find the printer
I have a laptop under Windows XP/Pro/SP3 and access the internet via a wireless (Linksys WRT54G Router). I connected a printer multifunction all-in-one of HP6310 to the router, using an ethernet cable and then installed HP6310 software on the laptop.
-
(Redirected) Laptop for programming
I want to change my Studio 1749 with a more portable. I want something with i5 (preferable ULV), good battery, flat screen (or something that would work well anywhere) and preferable resolution 1600 x 900. What would you recommend? I'm looking at Del
-
I searched and no one has really explained why the 104 error occurs when sideloading an app. Just to be clear. I have an app on the App World (published 2 years ago) and I'm trying to update and first I want to test it on my Playbook. Again, it is my