A Mac can be backed up to a Time Capsule via USB?

I know that you can save on a Time Capsule using ethernet and WiFi, but anyone who is interested to buy my 4' 2 TB Time Capsule generation th asked if she can save via a USB port. I do not have a USB 2.0 to USB 2.0 cable, otherwise I will try to understand this.

No, it's for attaching an extra drive.

Tags: Wireless

Similar Questions

  • Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

    Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

    1 n ° put them on a regular external drive and the value of Time Machine to back up as well; the files you want to keep should be at least two disks in case one of them goes down.

    2. they will not be usable until the restoration.

    (140480)

  • Time machine can finish no backup on airport time capsule

    Time machine can finish no backup on airport time capsule.

    explanation: there is no access to the/volumes/data-1/macbook diskcopiefile xxxx.sparsebundle that is used to back-up pro (error (null))

    The network failed to halfway through the backup.

    To resolve this problem, we need to know your complete network type.

    This modem do you have? Brand and model please.

    Who is your ISP? It is important for the IPv6 configuration.

    What model is the TC?

    What the configuration of TC in the network?

    How old is the MBP? If you have an ethernet port that you use it instead of wireless?

    Is this a first backup? Or were you works well for awhile and it's broken now?

  • I can't access the backups on Time Capsule

    A month ago I deleted from my hard drive and more. I have a MacBook Pro 2012 running macOS. I can't access the files on Time Capsule before is erased in the month of August, I can see the story in the timeline panel, but I don't have access to anything before erasure. Is it possible to access to the files before the wipe?

    A month ago I deleted from my hard drive and more.

    What hard drive you are talking about: one internal on your MacBook Pro (MBP), an external drive attached to the MBP for Time Machine backups, or internal hard drive to time Capsule?

  • Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

    Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

    Superior...

    After all, the chip is mainly a modem.

    Wireless is there but not designed as the primary connection.

    Wireless 802.11n 300Mbps AP with 2 x 2 MIMO Wireless bridge, WDS multiple SSID, including isolated invited SSID WiFi QoS (WMM) and PowerSave wireless security: • Wi - Fi Protected Access (WPA, WPA2) • AES, TKIP, WEP encryptio

    It is the Wireless N standard.

    The TC is dual-band simultaneous AC1750... even if in fact apple never leaves anything use 300mbit on the 2.4 GHz is more like AC1450... It is also 3 streams on both bands not 2 x 2.

    The fact that aid.

    The only thing to note is that a router from Apple can join never a router wireless not apple... so, there must always be plugged in by ethernet.

  • Mac Mail will constantly be disconnected with Time Capsule

    It has been ongoing for more than a year: I the time Capsule AC version (bought fall 2014) and uses a Macbook (version slim retina released in March 2015.) 12 "I am constantly the mailbox in offline mode in the Mail from Mac application.  The status bar displays "Error of account" and when I click on the error box, it gives the following message:

    DRAW THE ATTENTION OF

    There may be a problem with the mail server or the network.  Check the "iCloud" account settings or try again.

    The server returned the error: connection to the server "p15 - imap.mail.me.com" on default ports has expired.

    If I temporarily turn off Wifi and turn back on right, the error messages disappear and download new messages.  Everything works fine for a few hours, and then I start to see those! exclamation points! next to my mailbox.

    Initially I thought it was a problem with the Macbook.  They did a replacement under warranty of the wifi module into the Macbook.  Still the same problem.  So yesterday, I noticed that my iMac 27 "retina is sometimes as well.  And also, it is fixed temporarily by activating / disabling wifi on and outside.

    Interestingly, my business partner, who has the same version AC Time Capsule and retina macbook 12 "even I experienced the EXACT SAME SYMPTOMS in his house.  (Mailbox log in Mac app, remedied temporarily by activating / disabling wifi power).

    It's to drive us both crazy.

    Both have tried to remove the email accounts of our Macs and rebuild them.  Still the same problem.

    Is there a problem of connectivity between the time Capsule AC and some Mac computers?  I do NOT notice the problem when I'm connected to all other routers in other locations and mobile.

    If anyone has a thought on this, I would appreciate it a lot.  I am about to replace my Time Capsule with another brand of router in order to solve the problem, but all other routers are so ugly and I don't want some Darth Vader looking black thing with 8 antennas in my living room.

    I assume that you are running the latest OS to el capitan?

    The iMac is also updated for later?

    El Capo had e-mail problems... so I assume also that you have updated to the latest patch.

    Your experience with the laptop when you suggest that mobile are still correct... It is the TC at fault.

    There are known problems happening... not universal, which is a shame because then it would be imposed on Apple to fix... but it is not uncommon.

    I would recommend a reconfiguring of the TC... See the list below.

    I understand your network a little better.

    1. what modem do you have? Brand and model please.

    2. your ISP using IPv6 or spend now?

    3. is the work of TC as main router or bridge? (The answer might be inherent in the 1st quarter, but if it is a modem router I need the exact details).

    4. is the modem, also located in your living room... If you run ethernet instead of modem, a router could be installed right next to the modem... and the TC has changed to the bridge? It can work perfectly as a WAP right and for the TM backup when you remove its role in the delivery.

    Darth (breath in) Vader (exhale) Asus or Netgear router... which I suppose you don't not aesthetically... get to work extremely well.

    Start from a factory reset. No files are lost on the drive hard in doing so.

    Universal factory reset

    Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

    NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

    The installer the TC.

    And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

    1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

    for example TCgen5 for the base station and the name of the TCwifi wireless.

    If the problem is using wireless TC24ghz and TC5ghz with fixed channels like this also seems to help stop school dropouts. (I recommend you do cela.. 2.4 ghz 11, 9, 5 GHz use 36 or 149)

    2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

    3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

    If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

    4. check that your share on the computer name does not change... (It was mostly from the Mavericks)

    Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

    5 attach the TC disc into the computer manually. (Expired for El Capo... just use Finder...) Connect the box below search)

    In Finder, go, connect to the server in the main menu,

    Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

    You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

    However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

    6. ensure that IPv6 is set to link-local only in the computer. (Depends on your ISP and if they moved to IPv6.. e.g. comcast).

    For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

    In the TC configured only IPv6 local link... assuming you're on IPv4 yet.

    It is very important with some ISPS like cox cable at this time.

    It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

    You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

    These changes could amount to little more... practical household good network... but I salute them as a starting point.

    It's going to ruin your Time Machine configuration... So if you change the TC its location in the network name must be passed to TM... so open TM preferences and put the backup to the new location. TM will then say that he will make a new backup... once he starts, he will find the TC and original backups... check it out... and then do another differential... so no problem. If you are prompted to you want to use the old and new locations of backup just say a new.

  • How can I configure my modem wireless time capsule?

    I changed my internet business today.  I used to use a cable modem, but now I have a map of the internet outside of my home.  There was a box installed in my basement laundry room, but this is no the case near my computer. (iMac)  Is there anyway that I can configure my time capsule just directly plugging into my computer?  Part of my problem not either not very tech savvy, so read all items here, just got me confused.  Any help would be appreciated.

    Hi Nancy,.

    You should be able to set up on the wifi. This PDF explains how to do this more in detail.

    https://manuals.info.Apple.com/manuals/0/MA428/en_US/TimeCapsule_SetupGuide.PDF

    I hope this helps!

    Jonty

  • Can range of printers HP 6830 - I connect via USB and ethernet?

    I just bought a printer HP 6830.  I have a Windows Vista computer that I don't want to be connected to the internet and a PC of Windows 8.1, but also a laptop Windows 2000 who are both connected to the internet via ethernet (and can also be connected via a wireless connection).  I was hoping to connect the printer to the PC via the port USB Vista and for Windows 8.1 PC and laptop computer via an ethernet cable.  Can I connect via usb or ethernet connection at the same time?

    Hello

    You can install the software via a USB port on your Windows Vista PC, do not connect USB until the installation guide to make.

    So you can connect the printer to your network and install it on Windows 8.1 PC, USB and a network connection can be used for concurrency and would not interfere between them...

    For the PC under Windows 2000, the printer is not compatible with the operating system and there is no drivers for such a, you can find the system requirements below:

    http://support.HP.com/us-en/document/c04268294

    Kind regards

    Shlomi

  • Can I back up files with time machine iCloud. Seems not so, are there alternatives?

    I want files on mac, in the clouds and on local separate media seems quite difficult to achieve for a sensible backup plan.

    I looked for solutions and there are various tips on if time machine backup of documents Mobile ~/Library but I can access in time machine.

    Presumably, someone has solved this problem - hopes!

    If you have active disk iCloud it written copies of the files in the cloud on your local disk, these in turn are backed up by Time Machine, you don't need to do anything else to make it work.

    If you need to access your documents using Time Machine backup do you via the Finder > iCloud drive and not in the hidden mobile documents folder.

  • How can I back up all my data on a usb key mozilla Firefox?

    I now have a sync account. But in addition to being able to sync to other computers I want to safe me data on a usb key. How can I do this? Thank you Tj

    The profile is a folder where your firefox to save your data securely

    read the bottom of the article to know how to backup and recover your personal data

  • Computer can not detect the printer so that connected via USB

    My computer runs on Windows 7 Professional and my printer is model # D110a.

    My printer has worked fine since I got it, but a few weeks ago, my computer has been infected by a virus that forced me to reformat and reinstall everything. I installed the necessary software from the installation CD supplied with the printer, but when I try to connect my printer through the 'Add Device' option in the Configuration menu, my computer does not detect even if the printer is on and physically connected by a USB cable.

    Help please, I don't have the money to buy a new printer.

    No problem. Just glad that you solved. Can you go ahead and mark this as resolved to close issue? Thank you.

  • I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

    I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

    If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.

    As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.

    At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it.  We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.

  • Clicked forget time capsule, now I can't get it to appear in AirPort Utility.  How can I get it back?

    Accidentally clicked forget Time Capsule, now I can't get it to appear in AirPort Utility.  How can I get it back?

    Turn off all devices on the network... in any order you want

    Wait a minute

    Turn on the modem and let it run for a few minutes by itself

    Switch on the device connected to the modem and let it turn a good minute

    Keep the devices one at a time, about a minute apart from starting until the entire network is back

    Check if Time Capsule has resurfaced

  • My verse ATT modem (non apple devices to use this modem} is connected to the ATT line, Time Capsule (iPhones, Macs Time Capsule use) via ethernet Uverse.) Non apple devices can collect data from iPhones or Mac using the time Capsule?

    My verse ATT modem ({use of devices not apple wifi of this modem} is connected to the ATT line, Time Capsule (iPhones, Macs use the wifi of the time Capsule) and connect to the Uverse modem via ethernet.)

    Both devices are set to the highest security and each uses separate passwords.

    Non apple devices can collect data from iPhones or Mac using the time Capsule?

    With a bit of work by someone who knows how to do such things, not Apple computers could read some files on the Mac if file sharing is configured on the network... devices non-Apple and... He knew the device passwords or administrator for Macs.

    Mac could also play the files on other Macs if file sharing has been implemented and the device password or admin was known.

    If you ask if a PC can read the files on the Time Capsule, the answer is Yes, without doubt, assuming that the PC knew the password of device for the time Capsule.

  • How can I report a bug to Adobe? (Illustrator crashing Mac when recording to Apple's Time Capsule)

    Hello. I know it's a bug because it affects a large number of users. Basically when you save an Illustrator file (and occasionally a psd) back to an Apple Time Capsule the program freezes. Trying to force out Finder crash too then a hard reboot is required.

    There is a thread on the forum from Apple here: https://discussions.Apple.com/message/17761304?ac_cid=142432#17761304

    However, person or Apple, or Adobe does nothing to solve the problem, so I just want to know how to report this kind of thing to Adobe? I don't have a service plan (and don't think that I should a need either to report this kind of thing).

    Any suggestion is appreciated. Thank you very much.

    https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

    Mylenium

Maybe you are looking for