Mac Mail will constantly be disconnected with Time Capsule

Similar Questions

• How can implement you not with Tim Capsule and AirPort their simulation on the iMac?

  Hello

  How can implement you not with Time Capsule and AirPort their simulation on the iMac?

  I don't know what you're asking.

  AirPort Extreme is a wireless router.

  A Time Capsule airport is an AirPort Extreme with a built-in hard drive for data storage.

  An iMac is a Mac computer.

  An iMac is not a wireless router, so he is unable to perform the functions of a wireless router.

• process step by step new airport express from apple with time capsule base of connection (cable cat 5 150 Ft) with late 2008 macbook

  I would like a step by step process apple a new airport express with time capsule base of connection (cable cat 5 150 Ft) with late 2008 macbook.

  Connect one end of the long Ethernet cable (we assume that you have already tested the cable to make sure it works correctly) one of the three ports LAN <>- on the Time Capsule to the WAN port on the AirPort Express "O".

  

  We assume that the AirPort Express is new, is powered OFF... and has not been previously configured.

  Turning off the Time Capsule

  Wait a few seconds

  Put in the Time Capsule market and let it run a full minute

  Power of the AirPort Express and run a full minute. Currently, the indicator light of the Express slowly flashing orange

  On the MacBook, click the WiFi status menu icon and search for a list of the new AirPort access point

  Just below this list, click on AirPort Express

  

  Who will get the "Assistant" operational configuration. It will take a few seconds for the wizard to analyze the network and offer the correct setting in a display that will look like the example below, except that you can see your cameras and the name of your wireless network.

  

  In short simple name you want to call the AirPort Expressof type... .as OfficeExpress, for example

  Click Next

  Watch the next screen carefully to confirm that the AirPort Express is in place to extend using Ethernet, which confirms that the installation wizard recovers the wired between the Time Capsule and AirPort ExpressEthernet cable connection, so the settings correct configuration will apply.

  

  When you see the message Setup is complete, click done. Close the installation window, and you're done.

• Problems with Time Capsule

  I have problems with our time Capsule. My husband and I have Macbook Pro (from 2012). We use a Time Capsule as our backup disk but not our wireless router (we use the router provided by our internet service provider). We have configured like this for over a year and it is usually worked fine. In the last month, we had problems with backups does not happen. Currently, computer of my husband has saved in about 2 weeks, and mine has not backed up in 2 days.

  It seems that our computers lose their link with time capsule. If I go to the finder, the shared drive appears under "shared", but if I click on it to connect I get a message that says "connection failed." Airport utility shows the time Capsule but has a yellow triangle next to it that says "device not found."

  If I unplug the Time Capsule and plug it in again, it reconnects. I did this earlier this evening and was able to access the shared drive and make a return to the top. But a few hours later, this subject has disappeared again. I tried to do this same thing - unplug, get the rear connection, only to lose it again a little later. Any thoughts on what could be the problem? The Capsule was bought the same time than computers.

  I guess what surprises me is that you had no problems up to this point.

  Your computer must connect directly to the Treasury Board. Ethernet or wireless... It will break things especially in the BONES later if you do not.

  Do you have recently move you to el capo... ?? That could have triggered the problem.

  I lost the link but in apple of one document stated finally that you connect directly the computer now... because of the bad DNS in the operating system.

  If I unplug the Time Capsule and plug it in again, it reconnects. I did this earlier this evening and was able to access the shared drive and make a return to the top.

  That's why you get this nonsense. He is able to find the backup if DNS is renewed due to reset... After a few hours it is lost again.

  What operating system do you use?

  My recommendation is to put on wireless and a link to the direct of TC...

  A TC Gen4 purchased in 2012 is now at least 3 years and let me tell also your reliable stage... you are now at the stage of growing decrepitude of old people. It might work correctly for a year or two... It can suddenly die tomorrow... but more likely will fade into the sunset.

• HP B209a printer will not connect to my time capsule router

  Hey guys, I have a HP B209a printer which I got with my macbook pro, I just bought and when I go through the installation process and that you try to set my WiFi on the printer it will find my router from time capsule, but he will say that the router is "not at hand" which is impossible. works fine with the usb port and with my old router simply was not working my new time capsule.

  Any suggestions?

  Thanks rory.

  His way up on the top of your screen in the menu bar.

• Have problems and questions with Time Capsule were addressed in any significant way. Reluctant to buy according to your comments.

  Have problems and questions with Time Capsule was dealt with in a meaningful way? Reluctant to buy according to your comments.

  Apple did not have any material changes to the time Capsule to nearly 3 years. The only change that has occurred in the last 18 months or so is a firmware update to address security issues.

• Cannot view or connect to the Wifi network of 5 GHz with Time Capsule from Apple 5th generation

  I have a new Apple Time Capsule 2 TB with 802.11ac network support. I have setup my base station in order to disseminate the 2.4 GHz and 5 GHz network SSID. I have 2 apple (iPad Mini and Macbook Pro) time devices can see and connect to Terminal 5 GHz network however I have also a Lenovo Vibe P1 phone (dual band wifi supported) and Samsung Galaxy Tab S compressed (dual band wifi supported) and these devices cannot see or connect to the network of 5 GHz of Base Station. I also have a Cisco router that has a dual-band support and all my devices can see and connect to the network of 5 GHz of this router.  So I wonder why I have this problem with time capsule?

  I have reset my base twice station and it is a new device purchased last month.

  Any help or suggestion is appreciated.

  Did you use the SMB compatible names for everything...?

  That is to say the alphanumeric short, without spaces and Pure...

  for example base station name... TCgen5

  name TCwifi wireless

  Have you also used the password corresponding to these requirements... but can be between 8 and 20 characters.

  If so, then you must give a different name to 5 GHz and delete the password and test... If it's not yet connect the test manually on channels 36, 44, and 149 for example if you are in the USA...

• Problems of compatibility with Time Capsule

  I have a Time Capsule, which seems to be only compatible with Snow Leopard.  My software is OS X 10.9.5 (13F1603). Live in glue, I would back up my MacBook Pro to the Time Capsule as the internet is slow, but it seems that if they are not compatible with each other.  Any ideas as to what I can do?

  A time Capsule will work with any Mac operating system.

  You are right that the BONES later has more good problems.

  Here's my standard set of instructions to work things out.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually.

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

• Can I start again with time capsule 2 TB existing using an existing iMac and a new iMac.

  Trying to understand several iMacs and Time Capsule.  Can I save a 2 iMacs on my Time Capsule?  I am running AutoCAD LT 1015 on my new iMac, so far, I've not put back up on my Time Capsule.  I'm worried it might be a problem with the existing backup tutorial AutoCAD on the Time Capsule, interfering with the new version purchased.  Therefore, I wonder if I can remove the Time Capsule saved since the original iMac info and start back up both machines it again?

  I wonder if I can remove the Time Capsule saved since the original iMac info and start back up both machines it again?

  Yes you can. The way simplest and quickest way to accomplish what you want is clear the Time Capsule disk and then start over again with a new backup of a Mac. Then, once it's over, make a new backup of the other Mac.

  When the two Macs have saved for the first time, then both will continue back up automatically and gradually.

• Impossible to extend the existing wi - fi with time capsule airport

  Hello

  I have one Capsule of airport TB 2 hung on an Ethernet in my study (lower level).

  I already have an existing wi - fi network to ISP modem/router to my media box provided at the top level.

  In addition, I have an Extender provided by the ISP of lower level.

  I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.

  I tried several times to do so, but either it freezes up or creates its own network despite the

  mode bridge as stated in Airport utility.

  Guide gently with the method or Protocol correct to put that in place.

  Thank you

  Jay

  I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.

  It sounds like you may try to extend the network of your "main" router wireless

  The time Capsule will not be able to extend wireless network if your 'main' router is also an Apple AirPort base station.  Or... in other words if your 'main' router is not an Apple product, then the time Capsule will not be able to extend wireless network.

  So, the first question to ask here would be... What is the number of brand and model of your router "main"?

  If you intend to leave the time Capsule connected to your main router with an Ethernet connection, the Capsule must have the maximum value of "create a wireless network.  If you use the same wireless network name and password using your 'main' router, Time Capsule will provide additional wireless coverage in the area where it is located.

• Adding redundancy backup with time Capsules

  Are there problems associated with adding a second time Capsule to my system in order to add additional redundancy and safety of my backup options? I have a MacBook Pro and a single Capsule of 3 TB. I am looking for a non-Cloud option add extra security while maintaining the automation of the OSX TimeMachine.

  Adding a second Time Capsule works perfectly.  After that Time Machine performs a full backup of your Mac (s) on the new Time Capsule, it automatically alternates between two time Capsules backups.

  If you have the possibility of adding a USB or FireWire drive directly to your Mac, which would be a bit better set up in terms of reliability of time Machine, but probably not very convenient if you have a laptop that is moving all the time.

• A Mac can be backed up to a Time Capsule via USB?

  I know that you can save on a Time Capsule using ethernet and WiFi, but anyone who is interested to buy my 4' 2 TB Time Capsule generation th asked if she can save via a USB port. I do not have a USB 2.0 to USB 2.0 cable, otherwise I will try to understand this.

  No, it's for attaching an extra drive.

• Time Machine does not work with Time Capsule, after update of Yosemite to iMac 2011

  My Time Capsule features all work except when trying to access files with Time Machine. It is new and can be linked to an update in Yosemite. Tried rebooting both without success.

  You can mount the drive of TC in the finder?

  The old backup Time Machine may be usable via a direct opening so the sparsebundle to give it a try.

  If not, do you want to achieve... you want to migrate your files? Have you tried the migration assistant?

• changing disk ex hard time machine with time capsule

  Hello

  I apologize for a such a basic question, but I would just check.

  Ive recently bought a Capsule 3 TB to replace external HARD drive that I used for Time Machine on my rmbp.

  What is the process of "disengage" the existing Time Machine drive?

  I am not embarrassed to transfer my old back ups to my new time capsule, unless it is a good idea, but I would like to be able to access it on the existing drive should I need to.

  I mean do 1). I turn off time machine under preferences, (2). Remove the disc previous time machine, then editing (3) Time Capsule or I missed something?

  I can't find much information about it

  Thank you!

  When you install the new TC for TM a dialog box will appear asking if you want to use the old and the new objectives. Just say no, and the old target is not used then deleted the plist.

  It is very difficult and often fruitless old copy backup TM for the TC, so I think your plan is the right one... Start a new backup on the TC.

  We recommend you make by ethernet because this backup TM base is essential to recovery then. Wireless is slow and much less reliable.

  The older TM backups are always accessible by clicking on the TM icon in the dock, then select

  Browse other discs of TM.

• Unstable WiFi with Time Capsule + Booster Express

  Hello.  Every night my wi - fi breaks down.  I called Comcast and they swear the internet connection works and routers are the problem. (Internet works with a wired connection).

  I have 2 routers: Airport Time Capsule 802.11ac with a Terminal Airport Express 802.11n (2nd generation) in the range extender.  Both are about 1.5 years old.

  In the evening, the lights flash yellow and they go in and out.  AirPort Utility often shows messages yellow triangle error.  I can unplug and restart them and often the wi - fi goes back only to go down again later.  In this case all evening.  Increases the frequency and duration of the outage.

  If it is in fact a router problem, suggestions on how to solve the problems?

  Thank you very much!

  What is the make & model of the Comcast Internet modem brings you your Time Capsule (TC) connected to via Ethernet? Where is the Terminal AirPort situated Express regarding the TC? Same room, another room or different floor? Are they connected by wire or wireless?