A network cable is not plugged in correctly or may be broken?

Similar Questions

• A network cable is not plugged in correctly or may be broken - Y560

  Good morning guys!

  The issue now is to get my control.

  OS: Win 7 64 bit

  I see my network with red evil icon mark in the system tray... It is said no connection is available. But it's everywhere that I go, that he is saying the same thing.

  I guess the problem is with the network card does not.

  in devmgmt, I don't see any problems. Here, everything seems perfect. Get shot of evil he says:

  a network cable is not plugged in correctly or may be broken

  But the thing is I only connect through wireless... I connect like that.

  I have to update the latest version of the driver but no use.

  Could you help me!

  

  It is resolved.

  It has been disabled in the BIOS

  I spoke with 4 guys in here n Lenovo call center one of them might crack!

• A network cable is not plugged in correctly or may be broken - error message

  I bought a MSI laptop on there is a month and a half, and since I got it I had problems with the connection internet fall. It is Windows 8, and after troubleshooting the message said "a network cable is not plugged in correctly or maybe be broken"-the question being cable, any other device in the House has this question, just my laptop. It seems that it is a common problem with Windows, but no one can give me a solution Windows 8!

  Help, please!

  Hi all

  In the end, I found a disk in the box that my laptop came with drivers of wireless internet and after that download it seems to work very well - my bad.
  It is certainly a driver problem, but if anyone of you has a chance of MSI laptops, this site is easy to navigate and I had no idea what driver to install, it's a list of numbers and letters.
  Thank you very much for this forum, you are on the form! I got a response very quickly.
  I hope everyone finds their solutions!

• problem with access point or wireless adapter, a network cable is not plugged in correctly or may be broken

  I recently purchased the 8 Envy Touchsmart PC Notbook HP windows. Immediately I put in place, and everything worked well - even on the Internet, unfortunately has an hour or so I started to have problems with Internet... I go through the process of diagnosis to do repair, but that did not help much, so I updated my laptop. For a few minutes, it worked, and then the problem once more. Frustrated, I checked my other laptop (which I use to write this), and the network was very good. In fact, all my other WIFI device did not appear to have problems. Anyway, thinking it would help, I connected to my router, changed my mac address, it did not work so I had to go back to the default Mac setting. I ran troubleshooting 300 times or more, but who has not fixed my problem at all.

  I checked my network card, it is updated... I see no problems with it at all. I checked every setting in there, but there seems to be no problem. sometimes windows network diagnostics say found problems, he's talking about wireless /wifi ip is not configured or something, I don't remember the exact words. He would say that it is connected, but I see the yellow sign that appears on the wireless icon. He would also say «identifying...» "A minute im connected and then the next day it does not.
  I do of course when it comes to setting basic stuff, but it's just beyond my comprehension. I can't point the question of the pint. I just did a complete reset, in the hope that he would go back to its default setting if I have deleted or destroyed something by accident, but I still have questions. Can someone help me please. I am frustrated and fed up frankly at this stage.
  Please get back to me as soon as possible, because I have important files on this laptop that I need to download on my drive of google.
  Thank you.

  Hi Fergiey,

  When you run the network troubleshooting tool and which indicates that the wireless IP address is not configured correctly, I suggest that you reset the stack TCP/IP and check if that helps.

  One of the components of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.

  TCP/IP is a main component of Windows, you cannot delete it. However, you can reset TCP/IP to its original state by using the NetShell (netsh) utility.

  The reset command is available in the context of the NetShell utility IP. Follow these steps to use the reset command to reset TCP/IP manually:

  Steps: what please refer:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  a. open an command prompt, press the Windows key + X select prompt as an administrator.

  b. When the user account control box pops up, click on Yes.
  c. at the command prompt, copy and paste (or type) that follows the command, and then press ENTER:

  netsh int ip reset c:\resetlog.txt

  
  d. Note: If you do not specify a path of the directory for the log file, use the following command:

  netsh int ip reset resetlog.txt

  c. restart the computer.

  d. When you run the reset command, it rewrites two registry keys that are used by TCP/IP. This has the same result as the removal and the reinstallation of the Protocol. The reset command rewrites the following two registry keys:

  SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\
  SYSTEM\CurrentControlSet\Services\DHCP\Parameters.

  e. to run the manual command, you must specify a file name for the log, in which the action takes netsh is recorded. When you run the manual command, TCP/IP is reset and the actions that have been taken are recorded in the log file, called resetlog.txt

  Please post with the State of the question.

• G50 network cable is not properly plugged in

  I'm desperately need guidance. I have a 10 g50 of Windows running. I don't know much about computers and have traveled for two days forums and can not solve my problem. My computer does not connect to my wireless network. He has worked for the last week and then one day stopped working. I ran to help and he says two things:

  None of the networks you are connected before are in the range

  A network cable is not plugged in correctly or may be broken.

  Now my iPhone and Kindle work perfectly well with the wifi and the router is filled with operation. All my network connections are enabled and I rebooted, removed the battery and left unplugged or thirty minutes (it worked for about 5-10 minutes of glorious Internet before a failure even once).

  I have a knowledge of computers and need for education, please help!

  Hello

  Your Realtek driver is good, but try to upgrade the driver for your connection Wi - Fi, get the driver from here:http://support.lenovo.com/gb/en/downloads/ds103686

  This is the version 18.11.0.8 dated 22/06/2015.

  After you download the driver, go to the Device Manager, right-click on the AC3160, go to properties, uninstall the current driver, don't restart, install the driver downloaded. HTH.

• Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

  Wireless connections

  I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?

  Hello

  I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/how-do-i-put-WiFi-back-on-my-PC-after-upgrading-to/c9b90ec1-8393-4B57-b4af-2fbeb802af58

  You can also try the following methods and check if it helps.

  Method 1:

  Update a network adapter driver.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Troubleshoot network adapter problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• Problems connecting to internet - says network cable disconnected, not sure I have the correct driver installed.

  Had a big storm - got the new modem.  but they said that my drivers where missing or damaged.  Downloaded Marvell Yukon of gateway - to the GT5432 model. Always says cable unplugged network. However, Bishop says peripheral device works correctly. Don't save: no update-unable to connect to the internet.  I uninstalled and reinstalled; rebboted, etc. - still nothing. It has a problem with the PCI connection - no driver, but I don't see anywhere to down load or know what to download. Oh and another adapter on - think 1394 - when I turn that on and off the wonder; It shows the signal for the 1394---400 and does not say his unplugged, but still can not connect to internet.
  The "old" computer to try to find information; noticed that said, unplugged network cable but it allowed me to connect to the internet. When I disabled the 'extra' adapter message there went, speed signal only at 100 than at the 'old' calculation is not any other PCI devices connection listed.

  I'm not sure of what continues.

  The 1st computer was working fine - then picked it up to move it to where it belonged to my office and that's when he went out-made no sense to me!

  Because you seem comfortable opening your computer, have you tried re - a corner of the map (with power off, remove the card and reinsert it into the slot, be sure to exercise static precautions if you are in an environment of low-hu7midity).  If there is an empty slot, you can also move the map Marvell to another location.  See the comments below.

  It's a long shot, because even if you did not provide the complete ipconfig output, the data that you have provided appeared to be normal, but...

  Open network connections (start > run > ncpa.cpl > OK)
  Right-click on the icon for your network adapter, and then select Properties
  You should see a screen like this--> http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Connections/Local_Area_Connection/Properties/General/Index.shtml
  Issues related to the:
  In the upper area, under 'Connect using' said 'Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller?  If this is not the case, what does say?

  In the second box, what are the items are listed under "this connection uses the following items"?

  The only other thing I can think is that the Marvell Ethernet card was damaged in the same storm that got your original modem/router.

  *******************************************

  According to Gateway, the GT5432 has 4 card slots:
  A PCI Express x 16 (GUI)
  A PCI Express x 1
  Two PCI Conventional

  Your motherboard should look like this:
  

  Orange, top, connector is the PCI Express x 16.  You probably have a video card in this slot.

  The short white connector is the PCI Express x 1 connector.

  Two more long white connectors are the standard PCI slots.

  If I understand your installation, you should have the Marvell Yukon map into the slots of two down and your Agere modem on the other.  As long as you have the SMC1244TX PCI card, why don't just remove you the Agere modem or the card Marvell and insert the card CMS in one of the two PCI slots?  You are not using the modem and the working hypothesis is that the Marvell card does not work, so there is not much to gain by leaving a card in your computer.

  Download the user guide and drivers for the SMC here--> http://www.smc.com/index.cfm?event=viewProduct&localeCode=EN_TUR&cid=9&scid=51&pid=238 map

  Moreover, assuming that your open slot is the short PCI Express x 1 slot, you can buy another Ethernet card that will work in this niche: see--> http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100010064%20600016290&IsNodeId=1&bop=And&Order=PRICE&PageSize=100

  If I were you, I blow up the cheaper models and get the Intel EXPI9301CT $ 36 10 / 100 / 1000 Mbps PCI Express Desktop Adapter Gigabit CT.  Note that this is the same card with a similar name (with close to 400 customers) which sells for $29,94.  The price difference is because the cheaper "BLK" letters in the description, which means that it is "sold in bulk" and has no drivers, user guide CD or anything else in the box.  There are several negative comments from people who do not understand this difference and then had trouble finding the driver for the card on the Internet.

• A cable is not plugged into the network adapter 'connection to the Local network.

  Hi, I am using a Dell Inspiron E1505... OS: Vista... 32 bit... IE 9... I still use dial-up "Conexant HDA D110 MDC V.92 Modem" connection connected to the internet without any problem... the problem is when I asked someone to download a program "MS Office Home Student & 2010"(acheté le logiciel àle staples)... the person downloading the program via an Ethernet connection on my laptop... "." I never use the Ethernet connection to connect to the internet... Open to the top of my "Network connections" window and noticed my 'connection to the local network' has a red X and says "network cable unplugged"....." "" Broadcom 440 x 10/100 integrated controller. My toolbar in the bottom right of the screen displays an icon of two monitors with a red x as... I have made several attempts to fix using the "Microsoft fix - it Center... didn't help me..." also "diagnose and repair" on my laptop... no positive results... In the window "Network & sharing" "also shows a red X... Please advise... Best regards, John

  Hello

  Reading between the lines a bit here, it is my understanding...

  1. Never use Ethernet, probably because you don't have broadband for some reason any?
  2. Due to the size of the download, you asked someone else to do it with no broadband?
  3. As a result, which is two screens with a red X icon, but never used to be there?

  This icon with the red X is only informative. If you do not use Ethernet then you won't have connected cable, which means that the information you see on "network cable is unplugged" is correct. If you don't like this icon, you can hide...

  • Right-click on an empty part of the taskbar, and then click Properties
  • Click the Notification area
  • You will see a check box for the network, there uncheck and then click OK to hide the icon
  • Reverse this process, if you want to display the icon

  Or is your problem you can connect is no longer with dial upward? If this is the case...

  • Click Start, type inetcpl.cpl and press enter
  • Click the Connections tab
  • 'Never make a connection' values? If this is the case, always select "default connection" (or "Number using whenever a network connection is not present")
  • Click OK

  Tricky

• Laserjetpro m252dw: printer says network cable unplugged when plugged into a wall outlet

  My printer worked fine and all of a sudden, he is no longer prints and the display shows: "network cable unplugged".

  I turned off the printer, it is plugged. Does the same thing for the modem and the router. The problem is not resolved. Help, please

  Hi @Kajosil,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print because of this "unplugged network cable" error message on your HP LaserJet Pro M252dw Color printer. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  It seems that the printer does not have enough power to work properly, or there is a problem with the cable/port.

  • Please click here to update the firmware of the printer.

  Make sure that the ethernet cable is connected to the appropriate port on the back of the printer.
  See the section: 'Return product view' in the user manual for more information.

  • Have you tried another port on the router?
  • Have you tried another ethernet cable?
  • Check if the cable is damaged or deformed.

  If the problem persists, I would like to do a hard reset and electric drain to see if this will solve the problem.

  • To eliminate other causes, unplug the USB cable or telephone (fax) for the test so attached.
  1. Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  2. Press and hold the power button for about 15 seconds to drain any residual electric load and then release the power button.
  3. Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  4. Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector).
  5. Try another outlet to power/room.
  6. Try a different compatible power cable.

  If the problem persists, I would try resetting the NVRAM. This will outline the printer back to the default settings. The network must be configured again. I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  I hope this information is useful. Please reply to this message with the results. Good luck!

• Wrong message "Network cable unplugged"

  I bought a LAN cable to return to a cable after a while using wifi network. Windows argues that cable is not plugged in when it is.

  Windows 7 Ultimate 64 bit
  nForce 630 a/7025

  Things that did not work I tried:

  * The relocation of all necessary cables.
  * Deactivation/activation of the adapter of "network connections."
  * ipconfig/release and / renew.
  * Power cycling the PC.
  * Power cycling PC, get out the power cable for a minute.
  * Power cycling the router.
  * Turn off all sleep on the adapter and power saving options.
  * Check the BIOS settings.
  * Check for IRQ conflicts.
  * Uninstall and then reinstall the drivers from the motherboard to the latest version of the seller (15.49)
  * Disable DHCP and asking a fixed IP address.
  * Setting the speed to 10/100 half/full duplex instead of auto-negotiation.
  * Safe mode with network.

  Things that work:
  * Same cable, same router, different PC port.
  * Same cable, even router port, same PC, but running Ubuntu.

  I can ping localhost, but not the router. The property page says "this device is functioning correctly. All this suggests it's a problem of driver somewhere, but I'm at a loss on what remains to be seen.

  An update - uninstalling the driver, removing the nVidia driver and using the default driver provided by Microsoft seem to work. It is really a work-around, however, as there may be problems further down the line with the help of a former pilot. I just hope the that Windows Update does not automatically install new version behind my back at one point.

• Satellite A100: Crossover Cable does not work

  I have a laptop TOSIHBA SATELLITE A100
  I tried to connect my laptop to another computer by Cable Crossover
  and he wasn't wotking, the sign (X) appeared to me as if the cable was not plugged.

  Note that (when I put my cable DSL ' it works well on the net)
  to know that I tried this cable with the other compuers, and it worked fine.

  Hello

  Strange?  :|
  I think that it s certainly not a physical LAN port problem because as you have already said the ADSL cable works fine.

  You have the right settings TCP/IP to connect to the other computer?
  Both computers must be in the same workgroup. In addition, you must set the IP fix, the subnet mask and the gateway!

  Also, try to remove the map LAN device manager and restart the laptop.
  After the new reboot the OS must load the required drivers and should recognize the card even once.

  Good luck

• network cable

  My network cable is not monitoring the router, the system is OK or no problem since I changed cable but the problem persists. My WIFI is OK

  a developed description sometimes helps us to understand the problem in a better way.

  Anyway, check if there is no light is glosing on the laptop ethernet port, there should be platform lights, a solid, one blink.

  It could also be a problem with the port of the laptop or the router...

  First check this thing

• Network cable unplugged, but I promise you that's not!

  I connect my computer to my Linksys router (this computer will not connect wirelessly).  Unfortunately, my computer thinks that the network cable is unplugged.  Let me give a few details before you continue!

  Router: Linksys WRT54GL v1.1, with the firmware update

  Ethernet card: Realtek PCIe GBE Family Controller (with up-to-date drivers)

  Computer OS: Windows 7 64-bit

  And now for the fun part.  First of all, I thought it was a bad ethernet cable, so I tried another and another still.  The cable doesn't seem to be the problem.

  Secondly, I thought it might well be my ethernet card.  I plugged the ethernet cable from my modem cable directly on my ethernet card and was instantly rewarded with a connection.  With this, I noticed that my ethernet card is not the problem.

  Third, I thought, well, it must be the router.  I tried all four ports on the back of the router to see if it was bad.  None of them worked.  The router shows not all lights for ports 1, 2, 3 or 4, regardless of where I plug. Progress!  Of course, it is the router, no?  In order to ensure, I ran a cable ethernet to the router to a laptop and has been awarded once more with a connection.  If the router is not the problem.

  After doing some reading here and abroad, I have reduced my 'speed and Duplex"to 10 Mbps half Duplex.  Who has not solved the problem.

  Any help would be immensely appreciated, because I'm quite frustrated.  Please let me know if I can provide more information for you.  Thank you in advance for your help!

  My friend is a very nice person and so is his first wife. I get along with two of them very well, but they have been quarreling all the time while they were married. They are now divorced and married to new partners and the two relations are developing.

  What this has to do with your problem? Well, your systematic troubleshooting effort eliminated all the simple causes of failure but it has not examined the issues of compatibility. I suspect that NETWORK card in your PC is just out of tolerance or is your router. Other devices can be a little more tolerant (as new friends partners), but together they won't work. How to test this? Here are a few options:

  (a) borrow a switch/router of different brand of a friend.

  (b) connect the two PCs on a switch that is not the same brand as your router, and then plug the switch on the router.

  Please post the result here!

• You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable.

  Unplugged network cable?

  Recently I get this message then on the line. You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable. It is very aggravating. Can someone tell me how to solve this problem? It might have something to do with my firewall? I recently downloaded mozzilla firefox if I could play words with friends, because IE would not work on the game.

  Hi LouisteanGriffin,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

• Updated IE7 to IE8 and lost my network connection, get the error "network cable is unplugged" which is not

  After upgrade, network display icon with a red X through it indicating "network cable is unplugged" - which is not.  System Restore gave me back IE7, but without two of the toolbars (I've since found the fix for this - but too late).  Tried a system restore and now completely lost internet connection - IE will not launch.  Always get the message "network cable is unplugged".   I have reset the modem, but nothing works... should I ask Microsoft, HP, or my service provider (Rogers)?

  Thank you

  Christine

  Hello MsC_99

  Check the modem on the back of the system where the cable ether net branch. Think you that shed light on this subject? If this is not the case then you may have a problem with the NIC or ether net cable may have problems. If you do this then try uninstalling and reinstaling the NIC in Device Manager. If you don't see the network adapter in Device Manager then try booing the system BIOS and make sure that he is seen here. Let me know what you find. Thank you.