Controller time real-time FieldPoint or Ethernet interface

Similar Questions

• Mac Mini - no Ethernet Interface

  Hello

  I have the Mac Mini 2011 model, and I've been using an Ethernet for some time, have not had any problems, connection worked perfectly until now. First of all, there is no internet connection, so I have just connected to wifi for a bit, then I went into System Preferences - network, where more ethernet it indicated "cable disconnected" even if the cable is connected. I checked that the cable is not the issue, work on other devices. So I have that if I just remove the ethernet interface with - button, and then add it again with the + button that would solve the problem. However, now ethernet interface does not even upward in option:

  

  I'm currently under OS X El Capitan 10.11.3.

  Please help resolve this annoying problem, because the ethernet port is the key for the speeds for me.

  Thanks in advance!

  • See:

  If the Ethernet on your Mac has stopped working recently - Apple supports

  Installation often this works instead of handling files.

  Download update of OS X El Capitan 10.11.3 Combo

• TimeMachine and two Ethernet interfaces

  OS version 6.4.2 OS X 10.11.3 (El Cap).

  That ReadyNAS has two ethernet interfaces, which I had connected without adherence to the network.

  All Mac on the network would be fix and update the sparsebundle on the ReadyNAS for some time (two days for example) and then each machine would begin to complain that the destination does not exist. One solution would be to reboot the NAS and things would work for a while.

  How I solved this problem is to simply unplug one of the NAS ethernet ports and run on a single interface.

  I guess that there is a conflict in the NAS with Hello or other discovery services and some confusion about the interface gets introduced to the network. This seems to change with the times.

  I could possibly get a switch that supports the binding, but for now I would like to be able to run both interfaces if possible (I pay for them after all)

  Hi rawb1,

  Concerning the use of multiple network cards or adapters ethernet in your ReadyNAS system, here are some useful articles from NETGEAR that you can watch.

  ReadyNAS OS 6: Set up cards under customs

  ReadyNAS - collage/team and how should I use?

  I hope this helps!

  Kind regards

  BrianL
  NETGEAR community team

• of Ethernet interface input queue size/81/80 (max)

  Hello

  Anyone have the problem that the C1140 - K9W7 (or C1135) Gigabit interface

  sometimes "blockages" due to problems of queue (from what I understood it was the problems of queue)?

  I got this AP, C1140-K9W7 with IOS 12.4 (21a) JA1 and noticed that it did not

  any entry of packets to the interface, Gigabit, County of drop 0 but strangely the entrance queue

  information was that he had size 81 and 80 max... seems to me that the treatment of the queue

  code hanging somewhere...

  The output interface is OK however (the AP sends arp requests..).

  I did some research but could not find any information on this subject, also followed the

  steps to try to resolve what was causing this, without success [1]. The rating of IP traffic

  shows that the interface receives packets, but they are not under treatment and "not".

  droped too (at least the number of drop is 0).

  If I reboot the AP it works OK Yes... I can still access the console (via serial) and it

  in the case where there is no suggestion of procedure, is still in this State.

  Thanks for your time.

  John Mousinho

  [1] http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a0080094791.shtml

  Looks like this might be related:

  CSCtf27580 Ethernet interface queue entry corner of traffic broadcasting/uniGRE

  Y at - it no traffic WILL through this access point?

  The workarounds are:

  Reboot APs to bring APs back up for time being.
  
  OR
  
  go back to 6.0.188.0 code on WLC.
  
  OR
  
  Route GRE traffic away from AP's.
  
  It appears that it definitely exists in your code:
  12.4(21a)JHA          12.4(21a)JA01          006.000(196.000)
  

• Ethernet interface disappeared

  As I rebooted my laptop this morning, I didn't more wired Ethernet network. I have not installed updates yesterday, but yesterday it worked correctly. It is not a problem with the router or the cable, because it works correctly with the other laptop. The router detects when I connect the cable (the port lights) but the router has no ARP entry for the connection (only for wifi that I need to write this question). In addition, it still works the WiFi.

  Restarting the laptop does not help. I opened 'Network Preferences' and I removed the Ethernet network in order to recreate, but surprisingly, the 'Ethernet' interface does not appear in the list more (it is available WiFi, Firewire, Thunderbolt 1, Thunderbolt and Bluetooth PAN bridge). With the Network Diagnostics didn't help either. I also tried to test the equipment with the Apple Diagnostics (by pressing D when starting the laptop), but I did not need to start the diagnostics.

  It seems that the ethernet driver has been uninstalled or misconfigured.

  I have a Mac Book Pro (2011) with OSX El Capitan.

  Any advice on what to do?

  Thanks in advance

  You can take a look at the thread below.  Mac model is different, but could be the same cause as your punishment.

  Missing built-in Ethernet

• Using TCP on the second ethernet interface

  Hello

  I use a PXI 8109 Pharlap module running.

  I try to use the second my PXI ethernet interface to send UDP and TCP packets. The main interface is used to manage channels Veristand.

  Here is the configuration of my two ethernet interfaces:

  -eth0 (primary):

  IP: 10.0.0.3

  subnet mask: 255.0.0.0

  -eth1:

  IP: 192.168.10.9

  subnet mask: 255.255.255.0

  For UDP, I have no problem, the packets are sent to the second interface as I want to. I think it works because there is an entry "network address" on the "Open UDP" VI so that the system can choose the right interface.

  For TCP, I use the VI "to open a TCP connection" but there is not that kind of entry. And it does not work: I suppose that the system tries to use the main interface, but it can route packets...

  For more information, my two networks is physically independent.

  Can you help me find out what is happening? Is it possible to use the TCP protocol on the second ethernet interface?

  Thank you very much

  Kind regards

  Laurent

  
  

• Difference between the series & ethernet interface.

  Hello world

  I have some doubts in basic foods.

  Q1: What are the differences between the interface series and interfaces ethernet.

  Q2: Can we use ethernet interfaces to put an end to a WAN connectivity like series. Why always we use interfaces series to connect the Wan.

  Please help me by answering these questions.

  !!!! THANKS IN ADVANCE!

  Hello

  Fast Ethernet card is one of the option for a higher speed T1/E1, other TDM options that can be offered are DS-3 and STM1 that can be offered on infra nominal basis as well. For example, you can subscribe for 10 MB BW on 45 MB access.

  The answer to your second question, is that there could be a possibility that you have subscribed for VPN (EVPL or VPLS) L2 or L3 VPN (MPLS).

  Woks of L2 VPN on labels VLAN and L3 VPN termiantes on a device of L3.

  concerning

  Navin Parwal

• How can I put wireless and ethernet interfaces together?

  I have a 877w router, and I'm trying to set up a wireless network.

  I have a bridged RFC1483 ADSL, so I ATM0.1 in a group of bridge, and then, I defined an interface BVI1.

  However, after you have configured the wireless interface, I noticed that my laptop is the IP address of the supplier, as if wireless had precedence on the BVI interface. Put the Dot11 interface in a separate bridge under VLAN1 does not seem to help either. I tried to put everything in the same bridge, but fast ethernet interfaces do not support address (how the British Virgin Islands work then, I wonder).

  What should I do? Use two VLANS separated? I wouldn't do that. Any help appreciated. Thank you

  Hey, thank you, that did it.

  So I followed the article. I guess I don't understand how the British Virgin Islands. Of the article, I thought them then were at the same level, i.e. all the right behind the ATM interface. I also thought that a BVI able to fill several VLANS. Now my next mission is to understand why I was wrong on both counts.

  Guys, thank you very much for the help. Now I'll try to better understand what I :-)

• Virtual Ethernet Interface identification in UCS

  I would appreciate pointers or information that will help me identify the UCS 5108 Blade Server and physical ethernet interfaces based on a value Veth # I get via CLI or SNMP of a UCS FI 6248. For example, by using the command "show table address mac - dynamic" on a CLI 6248, I get the following information:

  * 0025.b500.000e 903 Dynamics F 0, F Veth1892

  * 0025.b500.003f 903 Dynamics F 0, F Veth1676

  * 0025.b500.004f 903 Dynamics F 0, F Veth1668

  * 0025.b500.005e 903 Dynamics F 0, F Veth1884

  * 0025.b500.006e 903 Dynamics F 0, F Veth1876

  * 0025.b500.009f 903 Dynamics 10 F Veth1660

  * 0025.b500.00af 903 Dynamics F 0, F Veth1868

  * 0050.5686.5d0d 200 0 F F Veth1876 Dynamics

  * 0050.5686.5d0e 200 0 F F Veth1852 Dynamics

  * 0050.5686.5d10 200 0 F F Veth1876 Dynamics

  * 0050.5686.5d13 200 0 F F Veth1852 Dynamics

  * 0050.5686.5d17 200 0 F F Veth1916 Dynamics

  * 0050.5686.5d1c 200 0 F F Veth1892 Dynamics

  How can I find out what 5108 chassis, the uplink FEX, the physical ethernet port each of these ports Veth # are?

  TIA,

  Angel

  Hello Angel,

  The following SAM CLI command provides information of full path for server NIC / vHBA

  show circuit of service X Server profile / Y

  There are other commands that do not completely trace the path.

  connect nxos

  See the border-interfaces pinning

  See pinning server interfaces

  HTH

  Padma

• IPSEC VPN on the Ethernet Interface

  Hello

  I have a doubt on a new fundamental concept.

  If IPSEC VPN works on Ethernet Interface of router Cisco? It's IPSEC VPN can be terminated on FastEthernet Interface of the router?

  So far, I worked with Serial Interface only.

  R.B.KUMAR

  Yes it can - see the sample config below: -.

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a0080094525.shtml

• How do the management interface of configuration of an ethernet interface?

  We have an ASA 5540 requiring a LAN port for failover. And the left side of the interface available only the management port. How do the management interface of configuration of an ethernet interface?

  You can disable the mode of management only on this interface to make as regualr routable port and use for other purposes, including the purposes of failover LAN database.

  On the management interface - 5510 but applies generally to the management0/0, itself including 5540

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/intParam.html#wp1057800

  Basic LAN failover configuration

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/intParam.html#wp1057800

  Rgds

  -Jorge

• Two IP addresses on Ethernet interfaces

  Is it possible to assign IP addresses double to 1 Ethernet Interface on a PIX (6.2)

  Thank you

  Evelyn

  N° !!

  You need a router to do this.

• Output signals controllable DAQmx (real-time)

  Hello:

  I have a question here.

  It is quite difficult for me, and I can't find any bad example and discussion.

  Hope that some people give me some information for me to look it up.

  --

  I am trying to generate an analogue signal into a DAQmx device (I have an and uses it well) to control another device.

  The output signal must be the sum of a background signal (which is decided, let's say a sine wave) and another control signal.

  The control signal depends on the entrance of real-time control, for example by using the horizontal location of the mouse to the value of the signal.

  The background signal is designed in advance and it will run continuously (should not be stopped once the system starts to ensure that synchronization between each devices).

  At the same time, the control signal should be continuous. (if there is no new entry, it uses the default value or the last entry).

  --

  I have almost no idea on how to do it.

  As far as I know, needs only one daq task to write the signal, and then she runs after.

  The control signal is a thing in real time, so the task needs to be updated very quickly.

  But regeneration tasks cost 50ms ~ on my computer (and I used the low levels rather than the DAQ assistant Renault).

  Also, in this case, my background/control signal will be be stopped every time that when the task is regenerated (and this makes my synchronization failure.)

  I checked DAQmx in real time, but couldn't find a few examples of tris and seems it isn't for my application actually (?).

  A possible solution, I came is cascading my two signals once they are generated by my DAQ hardware. And then I can use an a/o to be the background signal and use an another a/o to be the control signal.

  However, my control signal is always interrupted between each loop, and the method of external cascade seems not smart.

  Or data acquisition is not perhaps suitable for this application?

  --

  Hope that some people give me some information and then I can check their.

  Thank you very much

  Hi Jhensi,

  How the example provided was for you?

  With respect to the delay that you experience, there is always a slight delay incurred as a result of underlying driver DAQmx running in the background.

  In addition, your USB 6611 will have inherent delay due to being used as the communication protocol USB bus. There may be up to 100ms latency in some cases with USB 2.0.

  This driver requires a certain amount of time to change the type of output signal, that is production.

  A user will never really feel a 'Real-time' experience when you use an application that uses DAQmx. Deterministic control applications almost always use an FPGA with a real-time embedded controller.

  It is possible that other delays are due to timing considerations in your code but if you checked these it may be a hardware limitation.

  If you could let me know how you do that would be great.

  Kind regards

• Said airport Time Capsule LAN Ethernet cables disconnected, but they are all connected

  We have a Time Capsule airport 2nd generation connected to a Comcast Modem for Internet service. Our network is suddenly saying that the LAN Ethernet does not work because a cable is unplugged. However, I checked all the cables and connections. I disconnected all devices and then only plugged my Mac a to. A continuous Wi - Fi connection to work but not the Ethernet LAN. I tried to use another LAN cable. He also said that a cable is unplugged. We need the Ethernet LAN to access high-speed Internet and I tried everything and can not operate. The Ethernet LAN has been upward and years of work. If the Capsule or the Comcast Modem was defective, we would not have Wi - Fi access to the Internet, but we do. Material preferences network has always been implemented are configured automatically. However, the speed is now empty display instead of speed. If I change the settings to manually set up the material, I am still unable to set the speed manually, because when I try to select the up-down arrows next to the speed, nothing happens. It's as if the speed setting has been disabled. It's so frustrating. And I have no idea how to fix this.

  If you have not already completed a power cycle full of your network, now would be a good time to do this.

  Turning off all network devices in any order you want

  Wait a minute

  Turn on the modem first and leave 2-3 minutes, he managed by itself

  Switch on the device connected to the modem and leaves turn a good minute

  Keep power devices one at a time about a minute out until the entire network is back

  Check the network

• USB 8451: Is the controllable time-out when you make an I2CWRITE I2CREAD?

  Sorry if this isn't in the right advice.

  I use the NI USB-8451 box make communication I2C to talk to multiple devices.  I would like to put some features in my program to set up a list of devices that are connected to the bus.  It will attempt to communicate all 112 available addresses.  I tried testing this point by connecting the USB-8451 housing to any device and providing the address 10. It took about 5 seconds for the USB-8451 timeout box.  It would take a long time to proceed to any address 112.  So my questions are:

  Is it possible to shorten the duration of the timeout?

  Is there a better way to do this?

  Hello

  Although the value of timeout is not adjustable, I was able to interview everyone address 112 using the API script fairly quickly.  Here is the VI I've used.  Let me know if it helps.

  Have a great day!