2 active-Stanby ASA 5585 with first CX Manager module each, they can reproduce without an external PRSM?

Similar Questions

• a pc with a stand-alone module, real-time can display of its own data

  Hi all

  It is sort of a basic question, and it's probably why I can't find the answer explicitly in textbooks or the forum posts.

  If I want to use a PC as a unit in real time, and I install the LabView time real OS on it and make an Application of real-time on another machine and compile it in the PC target in time real LabView, can I attach a monitor or a kind of screen directly to the PC unit in real time to display some data I need?  Or do I still need a Labview PC to act as a host for display data and interface with a user?

  Thanks for the info!  I have some experience of labview, making some other applications but I have never used the RealTime module yet so I don't know much. So if there is a good place for more information in time real LabView for use a PC as a device target, which may also be of interest and would be appreciated!

  Thanks again.

  Steve

  Hi Steve,.

  Our objectives in real time are designed to work in headlessly, which means that they are independent and have no user interfaces.  It comes to screens.  For a display of information, you must use a host VI, on a host computer. There are several ways to move data between a target RT and a host PC including, but without limitation, TCP, UDP, network flow, published static Variables of network and Web Services.  These are all covered in documents on best practices.

  Here is a page real-time best practices:

  http://zone.NI.com/reference/en-XX/help/370622J-01/lvrtbestpractices/rt_portal/

  Here's a page on the conversion of a desktop computer to a target RT:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/2733

  Good luck with your project.

• Cisco asa 5585 syslog options for ips?

  We have CISCO ASA 5585 with a separate module for the IPS, I want to know what are the options for configuring syslog? Its almost impossible to find; and there are some forums on the internet that says cisco ips store the logs in native format / owner and cannot be exported.

  Please provide details

  Thank you.

  Click on the following link

  https://supportforums.Cisco.com/document/47881/SDEE-and-IPS

• CUVC in first Collaboration Manager

  I am trying to record a CUVC 3515 MCU 12 (version 5.7.0.0.21 of the software) on a Cisco Collaboration first, Manager 1.1.0.10719 but I am faced with an http error.

  Could you help me on this topic?

  Please find attached print of the CUVC configuration screens in the first Manager of Collaboration and of the CUVC test failed.

  Kind regards

  Laurent

  Hi Laurent,.

  As of today, CUVC does not appear on the list of the devices supported by Cisco first Collaboration Manager.

  You can find a detailed list of what devices are supported on your specific version of the first Manager of collaboration on the following link.

  http://www.Cisco.com/en/us/products/ps11480/products_device_support_tables_list.html

  Best regards.

• ASA 5585 X SSP 10 with installation of fire power module

  Hello

  I have 2 ASA 5585 SSP10 in the work of setting up active / standby. We bought 2 Swiss francs SFR ASA5585-SSP-10 modules must be installed.

  My question is whether the software system and boot images are already factory pre-installed on the cards. Or do we need to download the images of Cisco and re image install maps for?

  Thank you.

  The image of fire power system must be installed.

  However, they are probably on the old version 5.3.x.

  You want to bring them up to the last 6.0.1.1 via your management center of firepower once you've started them and registered.

• License problem of security context for Cisco ASA 5585

  Hello

  Can someone help me in license number for the ASA 5585 security environment,

  We recently purchased a box ASA (5585) which has 2 default security context and we had like to have context for this ASA 25 permit and we got two codes PAK of Cisco for 20 licenses and 5 respectively.

  When we generate the license key by combining the two codes Portal Cisco PAK and apply the same on ASA, do not see the 25; Instead, it shows only 20.

  Is it really possible to stack context like 20 + 5 licenses or to buy a PAK code for any license 25 context?

  Please advise me on this.

  Thanks in advance!

  Kind regards

  Kam

  Hello

  This should probably not be handled with Cisco directly or through the company that got you the license.

  To my knowledge, there is a possibility that the you have everything first to install a license key and the other licence could be upgraded from the previous license until the following limit of function under license.

  I had several occasions where I was provided with the wrong license and had to communicate with Cisco/provider to get licenses appropriate for my device.

  While I was announcing this response I checked the document of licensing for ASA models. It seems to me that there is no security content license 25 for the SAA. The deadline is 20 and license of SC 50 SC

  Check this document:

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/intro_license.html#wp1230400

  -Jouni

• ASA VPN with Fortgate

  Hello people!

  I still have the problem with VPN... Laughing out loud

  I have to create a new VPN site to site between ASA 5510 (8.42 IOS) and Fortgate, but something is very strange, Don t VPN came and I see in the debug crypto 10 ikev1 the newspaper to follow:

  [IKEv1] phase 1 default: incompatibility of types of attributes of class Gr OUP Description: RRs would be: Cfg 1 group would be: Group 2

  But if I ask the other peer to change in Group 2, the msg in the SAA is:

  [IKEv1] phase 1 default: incompatibility of types of attributes of class Gr OUP Description: RRs would be: Group 2 GCF: Group 1

  Fortgate is possible to activate the two specific groups of VPN 1 and 2, and I would ask the other peer left this way and the ASA show:

  [IKEv1] phase 1 default: incompatibility of types of attributes of class Gr OUP Description: RRs would be: Group 2 GCF: Group 1
  [IKEv1] phase 1 default: incompatibility of types of attributes of class Gr OUP Description: RRs would be: Cfg 1 group would be: Group 2

  The show isakmp his:

  9 counterpart IKE: 179.124.32.181
  Type: user role: answering machine
  Generate a new key: no State: MM_WAIT_MSG3

  I have delete and creat VPN 3 x and the same error occurs.

  Everyone has seen this kind of problem?

  Is it using Fortigate version 5 by chance?

  I saw Cisco ASA VPN problems repeatedly with this code Fortigate, but above all it has been a problem of Phase 2 and defining KB life maximally on the side of the ASA has solved it... However this seems not to be your problem here.

  The first thing in your config I see you have PFS enabled - have you insured it is located on the side of Fortinet or tried to turn it off on the side of Cisco to see if it happens?

  Be stuck at MM_WAIT_MSG3 means that you sent your return policy, but then you have not received the third package in the ISAKMP riding so either the Fortigate is unhappy with something or there's a routing problem (however unlikely given that you have already had communication)

  Try on the side of the ASA:

  debug crypto isakmp 7

  You can also confrm your external interface is 'outside1 '? You can see this "see intellectual property."

• Update software remotely active / standby ASA 5520

  Hello

  We have a pair of 5510 s and a pair of 5520 s, each active mode / standby.  I would like to upgrade the ASDM and ASA software on these, but can't find any documentation that advise on how this can be done without physical access to devices.  There I am on the site, but we will deploy these all throughout our network and I would like to be able to perform this type of maintenance without having to travel to each site.

  We use CSM and ASDM to manage these most of the time, but are certainly capable of configuration via the CLI.

  The question may be my understanding lack the foundations of the ASA, but I really don't understand how the software can be copied to the ASAs individual of the pair so that they can be reloaded and updated continuously.  My lack of understanding also makes a difficult word question, so please forgive me that.  With a remote SSH connection to the pair, I only copy the correct software to the ASA Active?  Or y at - it a way to get the software on each disk individually in the only SSH connection?  I'm not sure how to handle the ASA ensures no comfort in it... If I can get to remote software at each ASA (copy on different disks? i.e. disk0: and disk1:?), while I will also meet a problem to update startup for each statement individually, but to solve that I guess I could just remove the old software, but cela seems bad practice before confirming the new software is ok.

  If there is an easier way to deploy the new code via ASDM or CSM, I am certainly open to that.

  Any advice or resources that anyone could offer would be extremely useful and appreciated.

  Thank you

  Justin

  Justin,

  This is exactly why. If you are using version prior to version 8.4.1, routing table information is not replicated between the devices.

  Information that is not transmitted to the rescue unit when the rollover is enabled includes these:

  • The HTTP connection table (except if the HTTP replication is enabled)

  • The user authentication (uauth) table

  • The routing tables

  • Status information for the security service modules

  http://Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml

  If your gateway of default route is learned via EIRGP and you are trying to access from the internet, you won't be able to get to the secondary unit.

  Workaround solution, put the default gateway static with a metric higher while it appears on the running configuration and sent to the secondary unit.

  Of the questions let me know.

  Mike

• Export is mind bogglingly slow with first was last updated

  I'm on a mid 2011 27 "iMac 3.4 GHz i7 with 32 GB of RAM

  10.9.5 OSX

  OpenCL GPU acceleration

  Work external SSD disk

  I've just updated to the latest version of premiere which was released in June (10.3.0) and I am now incredibly slow export time. Currently about 3 hours for a 3 minute video. The images are all 1080 p h.264 to Canon. I use a color combination of Lumetri, FilmConvert, neat video stabilizer and warp, everything I'm aware slow down sometimes make... but I worked with first on this computer for almost 4 years, so I have a pretty good idea what to expect and I have never known export times this slow for such a short video. I've done much heavier video effects in the past which was not long away from export with previous versions of first.

  One thing I noticed, is that my computer does not use a lot of RAM for export now. In memory preferences that I put it to use up to 26 GB of my 32 GB of RAM and it is only using 5.6 GB. I've included screenshots of the memory and the processor activity monitor. My computer certainly does not seem to work as hard as he usually does to export the video as soon as possible.

  Any ideas would be greatly appreciated.

  

  

  Thanks Kevin!

  I got OpenCL enabled in display options. I know I'm pushing the limits of the compatibility with my old material and suspected that might be the problem. However, I did a few tests exporting a second 1 clip with different effects enabled and disabled and actually found out that neat video is the culprit. The video took about 1 1/2 minutes to render with video active Neat and less than 5 seconds to render with this option disabled. I use an old version of neat video and they haven't released an update for the new version of first came out, so I'll probably wait for them to get out an update and see if that fixes things.

  Thanks for the quick response!

• CS-mars does support ASA 5500 with version 8.4?

  Dear all,

  My mars is not able to discover devices Cisco ASA cisco ASA 5550 with last fact IOS is compatible with the CS March...

  Thanks in advance...

  Selva

  After some googleing I found that it is not supported...

  For more information, see link below

  http://www.Cisco.com/en/us/docs/security/security_management/CS-Mars/6.1/compatibility/local_controller/dtlc6x.html#wp85319

  HTH,

  GKP

• ASA EzVPN with several remote subnets

  Hello world

  I'll have the challenge of EasyVPN installation based on ASA 5520, and ASA 5505 (with the ASA5505 as the vpnclient) with several networks behind the ASA 5505.

  Access by the network directly connected on the 5505 to the central site works very well.

  But the second network segment (which is behind a router on the directly connected network) cannot connect to the central site.

  I guess I need to specify that some sort of acl's to be able to do that.

  BTW we do not use tunneling split, because all traffic moves through the tunnel (no local internet access).

  The layout looks like this

  (--LAN--)-5520---5505-(--LAN1--)-ROUTER-(--LAN2--)-(WAN)-

  LAN1 and LAN connection works great through the EZVPN Tunnel.

  LAN2 connection to the LAN does not work through the Tunnel of EZVPN.

  Here is the configuration used so far (outside the normal SHEEP, groups of objects and stuff ISAKMP crypto):

  Client:

  vpnclient Server 10.x.x.x

  extension-mode network mode vpnclient

  EzVPN vpngroup vpnclient password *.

  vpnclient username user1 password *.

  vpnclient enable

  Crypto ipsec df - bit clear-df outdoors

  Server:

  internal EzVPN group strategy

  Group Policy attributes EzVPN

  allow to NEM

  allow password-storage

  tunnel-group EzVPN type ipsec-ra

  General characteristics of tunnel-group EzVPN

  Group Policy - by default-EzVPN

  IPSec-attributes tunnel-group EzVPN

  pre-shared key *.

  user user1 password *.

  I hope you can help

  Best regards

  Jarle

  Unfortunately, it is not supported on the platform of the SAA. With EasyVPN on the SAA, only the connected networks can be advertised. To accomplish what you want to do, you need to configure a static IPSec tunnel and announce local networks via ACL interesting traffic. You can also use an IOS device that does not have the capabilities of "multiple subnet" with EasyVPN.

  http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/sec_easy_vpn_rem.html#wp1098057

• ASA 5510 with AIP SSM-10

  I'm new to network administration and our company has an ASA 5510 with and map AIP SSM-10. On the interface ASA when I try to load Intrusion detection, he said the following:

  "For IPS 5.1 (1) S205.0, use the link below to access the IPS Device Manager." (If the SSM management IP address or the port is translated, replace them accordingly in the below URL). IPS 6.0.1 or above will be fully interated ASDM. »

  Unfortunately, no URL is displayed below this message and there is no documentation in the company that owns this configuration. Is there a way to reset the AIP without resetting the ASA? How can I find the IP address to be able to configure it?

  The ASA CLI, you will be able to check the IP address of the AIP module:

  view the details of the module

  It will show you the ip address of mgmt of the module, and you can https to the IP address of your PC.

• ASA vpn with a public ip address different addresses

  Hello world. I can not find someone who can give me an answer 'for sure' of this thing. I want to connect via vpn ASA5505, called 2A and b. inside one we have net 10.0.0.0/24 and 10.0.1.0/24 net b. now, we can have 2 outside for one ip addresses (e.g. 215.18.18.10 and 222.26.12.12) because we have 2 providers to connect to the internet. the asa can follow 2 VPN - with the same cryptomap for the destination inside) so that if a grave he will switch to the other vpn by itself?

  This thing can be done with other cisco devices (for example, a 2800 series router?)

  Thank you very much

  Who are you looking to

  1. If the failure of the connection to B then A will use secondary WAN connection to try to raise the tunnel.

  I would use the backup ISP for this function.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml

  2. If the connection to A failed then B will try to set up the tunnel with secondary address peer.

  You can set several counterparts by using cryptographic cards to provide redundancy

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_guide_chapter09186a0080450b73.html#wp1042941

• did not get the activation key with my Windows 7 Home records. How do without pay $49 for technical support?

  did not get the activation key with my Windows 7 Home records. How do without pay $49 for technical support?

  You can connect to the Microsoft Store and retrieve your product keys:

  Find your key product if your purchase of Microsoft Store:
  http://store.Microsoft.com/Help/FAQ?Err=T2#AT2

• How to fix win 10 timeline stutter with first

  I have an Alienware GB 12 (bought in 2010) and it's always worked great with first.  I also have a Raid g I put all my images on.  The machine has lasted years with Win 7.  And earlier MS installed Win 10 without me giving him permission.

  The biggest problem I have now is to scrub the timeline.  Front with 7, I could scrub the timeline and just rubbed fast, slow as it should.  Now with 10, when I rub it stutters, which means that if I hit the arrow to try to speed through the timeline, it freezes up, then 3 seconds later the first image appears in the monitor of Prem, so I have to wait a few seconds to see the next image and so on.

  This problem has pretty much extra edition for me impossible to do.  When I hit the space bar, the timeline plays for a few seconds, then stutters, stops and then restarts.

  I am really at end on what to do.

  Thanks for your reply.  I don't have to worry about the drivers since I installed PP CS4 on my machine in 2016 and it worked great since then.

  All test files that I put in PP CC for this test work perfectly in PP CS4 - one PSD file, a file MOV of my camera and a clip video Shutterstock stock.  But they have all shown as white PP cc.  Here's a video I did with PP CS4 using the same files now appear as white in PP CC several years ago:

  https://www.YouTube.com/watch?v=E6sjXGyh3GM

  -UPDATE I forgot to restart my computer after installing I did earlier.  I got this screen:

  

  Then open PP CC.  Then, all clips and videos and graphics seem to work now:

  

  One thing I have not done yet even if it seems to work, is that I have not tried to export a movie still with encoder CC.

  My question is and I know it's a stupid thing - but don't you think I'm OK now?  It seems that PP CC works perfectly, and contrary to the PP CS4 where I could rub is more the chronology, I can easily rub now properly rub.  Thoughts?