Blue screen after with VM stand-alone converter P2V conversion

Similar Questions

• Question: With the new stand-alone converter how do you do a cold P2V? (booting from CD)

  With the new stand-alone converter how do you do a cold P2V? (booting from CD)

  Well, I see that cold Conversions are more supported.

• Help with restarting the laptop HP pavilion g6 auto blue screen after installing VMWare Workstation 7/8

  Hello, I have a HP Pavilion g6-1a52nr Notebook PC (running Windows 7 64 bit) which is in a reboot loop. This happened after I installed VMWare Workstation 7 (in the installation process there is no occurs.but error after installing that I try to reboot the machine, and then the following error has occurred).
  Now whenever the notebook starts up, it seems to be in a reboot loop after the windows logo then get a blue screen.
  When I connect to the system using vmware safemode also working.but in normal mode it displays a blue screen after logiin screen shows.

  By turning on the restart automatic system failure off I was able to read it as the Blue error message that says:
  -

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 1000007e
  BCP1: FFFFFFFFC0000005
  BCP2: FFFFF88006EFF443
  BCP3: FFFFF88003399D68
  BCP4: FFFFF880033995C0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\031212-28672-01.dmp
  C:\Users\user\AppData\Local\Temp\WER-62072-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288 & clcid = 0 x 0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  
  -
  Can someone give me advice on how to solve and prevent this problem?

  
  Thank you

  you have the HP-tools installed?
  They often conflict with VMware.
  Try disabling the startup of the HP-tools

• Qosmio G10-137: blue screen after re-install using Recovery CD

  Hi all

  just got my qosmio G10-137 earlier this week after being under repair since the beginning of the month of January! Guys made the repair found no better then install the Dutch version of the operating system. I don't like this, then I took out my recovery CD and began the recovery. Everything works fine and I am asked to remove the media and reboot my PC.

  This beautiful laptop to start early and... Blue screen of death. Restarts, wonder how to restart... count up to normal reboot... BSOD... restarts, wonder how... I choose "Safe Mode"... BSOD... I choose the mode safe mode with prompt... the system.ini file is missing!

  It seems that the recovery CD is bogus.

  If someone has encountered this? Does anyone have any resolution?

  Kind regards
  Wim

  Post edited by: wvl

  Hello

  It s very strange because the recovery CD was tested and install several times. It should work without any problems.
  I put t know where you come from, but the service partner should install the Windows operating system in the same language. In this case, if you bought the device in Dutch the recovery CD and the OS are in the Dutch language.
  Please note that you must use the same recovery CD that came with the device. Another recovery CD will not work.
  What you can do is to test the unit with an original CD of Microsoft Windows. It would be very interesting to know if the blue screen appears with the original Windows.

• 8530p blue screen after the awakening of the mode standby.

  Hello.

  Windows 7 Enterprise 32-bit. (EDITED)

  A user has a problem as his computer blue screens after he was awakened to "sleep" mode and the other thing is this problem is intermittent.

  The error message I saw said that it was a KERNEL_DATA_INPAGE_ERROR STOP error message is 0x0000007A and the second parameter was 0xC000009D.

  According to http://msdn.microsoft.com/en-us/library/ff559211 (v = vs. 85) .aspx this type of error indicates - "0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective wiring or in bulk, termination or that the controller does not see the hard drive."

  Hard disk, I ran the tests integrated in the BIOS, online tool check the system of HP for laptop PC (http://h20239.www2.hp.com/techcenter/HP_SystemCheck/hp_syscheck.htm) and same Seagates own Seatool because there is a Seagate drive in the machine. All these tests said nothing about a problem with the hard drive.

  The online tool, said there is no update available on the BIOS drivers.

  I even had the user to remove the hard drive and put it back to make sure he wasn't a wire loose, bad connection or something like that.

  I phoned helpdesk of HP where I live and I told him this and he said that it is most likely a software problem.

  So so I need help to find out what software might be behind this error.

  I can't provide shocks either, given the error and blue screen also says "dump of physical memory failed with status 0xC0000010.".

  So is it a known software that could be the cause of these problems?

  EDIT: As pointed out by erico, I forgot the information about this operating system. That's why I added this information at the top of my first post.

  Sorry I have not responded earlier.

  It seems that the problem is solved since the user had no blue screens for over a week now.

  The solution was quite simple: reinstall on a new hard drive, even if each test drive, I ran on the subject, said the old drive was ok. This includes BIOS integrated HP and test online, chkdsk in Windows 7 and Seagate tool own Seatool.

  Best regards

  Ljungan.

• Get windows error blue screen after installation Service

  I'm getting error " PAGE_FAULT_IN_NONPAGED_AREA_ (nischifk.sys)" blue screen after installing the VISION acquisition software in my OS Windows 10.

  I tried to install GO twice and got the same error.

  Awating for your valuable review

  Hi piZviZ,

  Sorry to hear about installation problems going TO that appeal to you. I guess you use going TO February 2014 or slightly earlier - can you confirm? There was a problem with one of the components, NEITHER FlexRIO going to understand which caused this exact problem on systems with a UEFI BIOS. We have since fixed the problem. If that were the problem, here are a few options:

  (1) install GO without Support IMAQ i/o for all cards of the R series (1473R, 8237R, etc.). This means that the affected FlexRIO component will not be installed.

  (2) update to a newer version of GO - I think that going TO August 2014 f1 shoots in the FlexRIO patched component that could solve the problem. If you choose to upgrade, I would recommend just upgrading to the last GO, if you are capable of: going TO August 2015 f1

  (3) keep the version of going TO you and patch the component FlexRIO: How can I get a blue screen after installation OR FlexRIO 13.1?, NI FlexRIO 13.2.0 Patch détails

  I recommend just update to the latest going TO if possible.

  Kind regards

  Joseph

• Blue screen after the recent updates of security for Windows XP SP3.

  I got following error messages "Blue screen" after the latest updates from Microsoft:

  0X0000007E (0X8053355E, 0XBA4CB50C, 0 X 80000003, $0XBA CB208). I tired to run in all modes of SECURITY but still had the same problem. I ran Dell diagnostics and it came with no error in memory or hard drive. I have a Dell Inspiron B130 w/2 MB of RAM. Does anyone have a solution? The laptop came with no CD boot.

  @Jazzman1962 and flowie,

  I suggest you follow the steps mentioned by 'LThibx' in the http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1thread.

  -------------------------------------------------------------------
  Naveen
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue screen after installation KB2393802 / KB890830

  Windows 7 Ultimate

  I received today a handful of updates. He finished in a blue screen after reboot. Only with the restoration of the point system that I was able to start in the normal way of restoration. I installed every update one by one and was able to isolate the problem. Each of these two updates (KB2393802/KB890830) which brings back me to the blue screen. I also tried to download and install these updates manually, but had no success.

  My impression is also that other side to this problem if you for example search KB2393802 on google.

  Is it a known Microsoft issue and if there is a fix available for this?

  Any hint is appreciated.

  Cheers, mikeych

  Hello. Has been able to solve the problem. Update some hardware (e.g. video) drivers and the system once again stable. No more appeart to blue screen after installing the MS updates again.

• Get blue screen after Windows KB968389 updates

  I got the blue screen after that almost each update of Windows, but later is the following:

  Internet Explorer 8 for Windows Vista for x 64-based systems (25/08/09)
  Update for Windows Vista for x 64-based systems (KB968389) (11/08/09)

  I have a new Dell laptop Studio 15.  Do the system restore still does not work, or do not put the machine in Mode without failure.  I'm tired of spending hours trying to get my machine up and running

  Hello

  Certainly Support Dell help you change things anymore they can claim it was something
  you did it.

  Dell support
  http://support.Dell.com/

  Dell forums
  http://en.community.Dell.com/forums/

  My thoughts are that it is a driver problem. Try to update your drivers, and then stop the updated driver in Windows Updates.

  -----------------------------------------

  This is my generic how updates of appropriate driver:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ----------------------------------------------------------

  My generic blue screen troubleshooting if necessary:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -----------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------------------
  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  ------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday.

  Hello
  I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday. To do this, that every time I try to start the system.

  Whenever I try to start it gives options to start in safe mode, safe mode with network, safe mode with prompt etc., but all these options find you on the same blue screen with the error mentioned above, then it tries to restart with the same behavior over and over again.

  Any guidance will be appreciated. Thnx Nick

  Hello

  If you meet this new,
  http://mikemstech.blogspot.com/2011/12/troubleshooting-0x50.html

• game problem: blue screen after 10 min

  Hi all

  my system is the 3000 N200 0769 - BDG (T5250, Intel X 3100) with 4 GB of RAM and Windows XP Professional. I know that this laptop is not designed for games, but it should not crash, if I want to play something.
  So far, I tried HL2 and Trackmania Nations Forever. Both games run under low or good enough way of details, but I get a blue screen after a few minutes.
  I installed the latest graphics drivers from Intel and all my other drivers are up to date. BIOS version: 68ET26WW
  I have not yet met problems with other programs.

  Thanks for help

  
  

• H - HARVEST with 1142N - stand-alone or models LWAPP

  Have a remote site with several stand-alone 1142N APs. Have to replace some old AP and wishes to standardize on the 1142N. Consider using the WPS 4400 control with REAP H rather than have them hang out there alone, but want the backup in case they lose the connection to the office. Wondering if I am better or to buy the LWAPP models continue with the stand alone?

  Wait, they can be CONVERTED to work with the controller. You just 'upgrade' the IOS to an image lwapp and boom, he joined a controller. But what I've said, is that you can have the IOS AP as is, work with a controller. You need to make lwapp first, which is just another IOS image that runs on it. (if you check in the download section of cisco.com, you will see '"IOS Software' and"IOS lwapp upgrade image").

  So to answer your question in leolahoo, simply upgrade you the IOS in the 'ios to lwapp upgrade image".

  command is "archive download-sw/f/o tftp: / /"like when you put a new IOS on it. "

  Nicolas

• blue screen after computer mode alarm watch

  Hello, I get a blue screen after waking up from my computer Windows 7 sleep mode.  The message isblue problem signature: problem event name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 locale ID: 1033 additional information about the problem: BCCode: 116 BCP1: FFFFFA80068823E0 BCP2: FFFFF880057E7394 BCP3: 0000000000000000 BCP4: 0000000000000002 OS Version: 6_1_7601 Service Pack: 1_0 product: 256_1.  Can anyone help?

  Hi Jaycee,

  Blue screen errors can occur if a problem causes Windows 7 to stop or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."

  These errors can be caused by hardware and software issues, and it can be difficult to solve the problem. The following methods and tools can often help get Windows running again.

  I suggest you remove all external devices except the keyboard and mouse and check if it helps.

   

   

  Please follow the methods and the update below us on the State of the question.

   

  Resolve stop (blue screen) error in Windows 7:

  http://Windows.Microsoft.com/en-GB/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Warning: Before performing a reinstallation of Windows 7, should be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before you reinstall the operating system.

  You can also download the last dump file so that we are able to help you. C:\windows\Minidump

   

  You can use Windows Explorer and copy the dump files to your desktop or your personal documents folder. Then download them to your Sky Drive folder.

   

  If you are not able to find the dump file, and then check if it has been activated. To so proceed as follows:

   

  a. click Start, point to settingsand then click on Panel.

  b. double-click on System.

  c. click on the Advanced tab and then click settings under start-up and recovery.

  d. in the Write debugging information list, click on image partial memory (64 KB).

   

  For reference:

   

  Send a copy of your dump file in a shared file on your disc of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  To change the folder location for memory dump files, type a new path in the dump file box (or in the directory of small box discharge, depending on your version of Windows). You can go through the link for more information

  http://support.Microsoft.com/kb/254649

   

   

  I hope that the information above helps you.

• (blue screen) BUGCODE_USB_DRIVER with * STOP: 0X000000FE

  (blue screen) BUGCODE_USB_DRIVER with * STOP: 0X000000FE

  Hello
  I have Hp pavilion dm4 laptop computer with windows 7.
  Since last one I get a blue screen with error message over and over again. I've updated the BIOS and test HDD
  and tests of memory but not able to draw any conclusions.
  Please help me...

  Here is the error description...

  A problem has been detected and windows has been shut down to avoid damage
  on your computer.

  BUGCODE_USB_DRIVER

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow these steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is the new installation, ask your hardware manufacturer or software for windows updates you might need.

  If the following problem, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select advance startup options,
  then select Safe mode.

  Technical information:

  STOP: 0X000000FE (0 X 0000000000000008, 0 X 0000000000000006, 0 X 0000000000000005, 0
  XFFFFA800760A7A0)

  Thank you
  Mansi

  Hello

  Check with HP Support, their drivers and documentation online and ask in their forums
  about known issues with this model.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =====================================================================

  Do not forget to check with the manufacturer of system support (or motherboard for custom systems manufacturer)
  and their forums (if any) for known issues.

  Check these KB Articles that "pourraient" apply.

  Stop 0xFE peripheral sleep or Hibernate with USB streaming output
  http://support.Microsoft.com/kb/974303

  "Stop 0x9F" error or "Stop 0xFE" on a Windows 7 or Windows Vista-based computer that
  use some USB AMD EHCI host controllers
  http://support.Microsoft.com/kb/982091

  Error "STOP 0x000000FE" in Windows 7 or in Windows Server 2008 R2 when the computer enters
  or recovery mode sleep (S3) or from hibernation (S4)
  http://support.Microsoft.com/kb/974410

  Those 4 other KB Articles are available (from the date of this reply)
  http://support.Microsoft.com/search/default.aspx?mode=a&query=0x000000FE&SPID=14019&catalog=LCID%3D1033&RES=10

  ============================================================

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  You can solve these yourself using BlueScreenView, MyEventViewer and other methods
  in this thread. Don't forget to use MyEventViewer to check at the time of the BSOD or less than a second
  in front of them to see if something is useful in the event viewer. Top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Although the control of bug 0xFE: BUGCODE_USB_DRIVER indicates generally material it could easily
  be a connected USB device and not a system USB device. And you can never really exclude drivers.

  BCCode: FE 0x000000FE<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/BUGCODE-USB-driver-0x000000FE-* 1251.html? = date order

  --------------------------------------------------------------------------------------

  Is it a Windows 7 upgrade installation or Windows 7 comes on the factory system?

  A possible cause can be updated to Windows, including pilots. Even the drivers are generally not considered as the
  USB-related, such as video/display, network (NIC & WiFI) and others, may be the cause.

  Especially Norton, Kaspersky, McAfee, SpyBot, Adaware and others may cause or have a role
  in this issue. Try to uninstall it to see if that helps. Use the removal of their creator tools and/or
  Special instructions. (Antivirus/antispyware/security programs)

  ----------------------

  Remove all THE USB devices on the computer. Don't forget to search the drivers updated for all USB
  devices.

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for all hidden devices / people with disabilities
  (can have zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  =======================================

  After the above, attach a USB device at a time to see if any cause the issue.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows 8 HP laptop blocked on clear blue screen after auto repair.

  My younger brother, who has a laptop HP in Windows 8, told me recently that her computer was broken. I turned it on and it works normally with loading points and logo of HP that move in a circle. Then after a few minutes, a brief blue screen appears with a frowny face and a message that says: "your PC has encountered a problem and needs to restart." We are only collecting the error information, and then we'll restart for you. "After that it shows that for about two seconds it goes back to the HP screen where it says now auto repair. Then it goes to a black screen blank, followed by a white light blue screen with which I can see get around and see the mouse. I tried pressing all the buttons I could think of, all the 'F', control + alt + delete, etc, but I can't really start up where it can connect. Any help would be appreciated, thanks in advance.

  Hello

  Check with HP support or a real computer store (that makes its own service in the workshop).

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ====================================================

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  You can start safe mode?

  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  Error: Windows could not start. A recent hardware or software change might have
  problem after installing Windows updates
  https://support.Microsoft.com/kb/2674065

  Try to run the auto repair: (can be run from a Windows disk if necessary)

  How to run a repair 'automatic' to solve the problems of Windows 8 start
  http://www.eightforums.com/tutorials/2843-automatic-repair-run-Windows-8-a.html

  ======================================================

  If necessary:

  How to start on the "System Recovery Options" in Windows 8
  http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">