A physical server with 2 NETWORK interface card using a virtual machine as IPS (transparent VM) and everything should work normally?

Similar Questions

• TCP on PC server with the network interface has 2

  If I need to create a TCP on PC server with the network interface has 2 with a different IP address, for example 192... and 172... and the IP address of the client side is 192..., is there something I need to take care.

  Any suggestion, thank you.

  No, by default the server listens on all interfaces.

• Network configuration / routing / two network interface cards / NAT - leased / dedicated Dell R210 running VMware ESXi 5.1.0 build-799733

  Network configuration / routing / two network interface cards / NAT - leased / dedicated Dell R210 running VMware ESXi 5.1.0 build-799733

  Hello

  I'm trying to understand how to configure a dedicated server of Dell R210 rented running VMware ESXi 5.1.0 build-799733

  This dedicated server is rented www.online.net and sits somewhere in France. One of its network adapters have an IP public 62.210.177.20x. The other NIC is here, but I do not understand how it is configured. According to the www.online.net portal, the other NETWORK card has or should have an IP 10.90.116.20x. And I am obviously set up is to have some virtual machines running and be able to access the Internet. I have access to the console of the server Dell through iDRAC and since I could see, one of the network adapters in the IP is 62.210.177.20x defined, and the other has been shown out of service. I managed to make it appear the other interface but I cannot find anywhere how to assign the IP address 10.90.116.20x to this 2^nd network adapter. But then again I don't even know if I should or if I need to assing a IP address to this 2^nd network adapter. What is the cable connected even for this 2^nd NIC? I do not know. Should it be - I'm not either. I don't know French and manuals/instructions on www.online.net are in French. I can try an online translator, but I don't think that what I'm looking for is explained. How do I get this set up? I have to do something about the ESXi on the server console? This interface 2^nd should be in place, or it must be down as if it was originally? Yesterday after watching someone videos on YouTube, I added the second virtual switch and moved the virtual hosts of this switch 2 and he entrusted the 2^nd NIC. But that 2^nd NIC had a red X next to it probably indicating that it was disconnected the 2^nd form virtual switch. Today and now I have managed to access the ESXi console server through iDRAC, I bring the 2^nd NIC, and now both network adapters are assigned to the virtual switch 1^st . But I think that a NIC should be attributed to a single switch and the other card NETWORK on the 2^nd switch. I'm just a desktop guy with enough knowledge to be dangerous J if you / someone put in steps how and where to set them up it... PLEASE

  Thanks in advance

  cweks

  ~ # vmware - v

  VMware ESXi 5.1.0 build-799733

  ~ # esxcfg - road

  VMkernel default gateway is 62.210.177.1

  ~ # esxcfg-vmknic-list

  Interface Port Group/DVPort IP IP family address Netmask Broadcast MAC address MTU TSO MSS active Type

  vmk0 management network IPv4 62.210.177.20x 255.255.255.0 62.210.177.255 d4:ae:52:cb:bb:84 1500 65535 true STATIC

  vmk0 networking fe80::d6ae:52ff:xxxx:bb84 64 d4:ae:52:cb:bb:84 1500 65535 true IPv6 STATIC, PREFERRED

  Portal www.online.NET--information

  NORMAL 1 ready 62.210.177.20x xxx.domain.eu.       D4:AE:52:AB:BB:84

  2 PRIVATE loan 10.90.116.20x d4:ae:52:ab:bb:85

  http://wiki.hetzner.de/index.php/VMware_ESXi/en#Network_configuration

  Network configuration

  • VMware vSphere Hypervisor is an "operating system" for pure virtualization and support NAT or routing. Therefore, only a real bridge configuration can be used.
  • To use a subnet additional IP must be configured as a router VM.

  If I understand the above, I need to show some VM and set up as a router? If the virtual machine that will act as a router must have two network interfaces, where it is connected to a switch and the other to the other switch network card. Am I do? The YouTube video that suggested, but I thought that maybe / somehow ESXi can route packets between the two network cards, but from what I read, ESXi can route packets. Do I need to order an additional / extra / 2nd IPv4 address so that it can be assigned to the interface of the router?

• HP Pavilion a6330f desktop PC: is it possible to update my Network Interface Card?

  Is it possible to replace and modernize the Network Interface Card that I have (10/100 Base-T Network Interface)?  If Yes, do you have a recommendation indicating what replacement card should I buy?  The network interface that I have now I cannot take advantage of very high speed that my internet provider (150mmps).  Thanks for your help with this... Mike

  You are welcome.  Thank you for the additional information.

  Here is a card that should work for you:

  http://www.Amazon.com/TP-link-TG-3468-1000Mbps-Gigabit-express/DP/B003CFATNI/ref=sr_1_1?ie=UTF8 & qid = 1420761130 & SR = 8-1 & Keywords = PCIe-x 1 + Network + Card

  Read the reviews to see what users say about it.  You should disable the network adapter before you install it.  There is a PCI slot and the PCI Express x 1 slot is faster.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Unity and double network interface cards

  The unit works well with 2 network cards? Tips or tricks if you use 2 network cards? They are one of the subnets differnet 2. My voicemail ports are registered in CallManager, but on a different subnet from the CallManager is on. And this isn't the MAC for the NETWORK card that my license file is for.

  Two NETWORK adapters is supported only in a configuration Active / Passive with the unit. Both NICs must share the same IP address. 2 cards using NETWORK in an active scenario can cause audio one-way and MWI problems. Please see the links below for confirmation.

  Configuration and troubleshooting of network interface cards double for Cisco Unity

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/products_tech_note09186a00801d1c56.shtml

  Troubleshooting Cisco Unity

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/prod_troubleshooting_guide_chapter09186a008015082b.html

  I hope this helps. If so, please indicate the position.

  Brandon

• How many switches must be configured and min no network interface cards?

  Hello

  We will implement the ESXi5.0.

  We would like to know if we use different ports for network management and vMotion groups?  It seems that two of them use the same (different from ESX 4) IP address.

  In addition, my supervisor would like to know what is the minimum number of network interface cards to use (because the server has no slot PCIe)?

  Your opinion is requested.

  Thank you

  TonyJK wrote:

  Since we implement VLANS on our site and based on the documentation, ESXi 5 gets only 1 battery IP, wonder what is the best way to cope.

  It is true that ESXi has that one battery IP, which is very good compared to the other two in ESX (Linux in the Service Console and the Vmkernel). However, we have only an IP stack means that it is the same driver tcp/ip, but does not mean that we cannot have multiple IP addresses.

  For example, you can create a Vmkernel how many interfaces you want and assign different IP addresses, which could be on the same network or on different.

  Even if you don't have a VLAN in your environment I would still recommend using another IP network for vMotion for your management. This will make the two a little more 'best practice', easier to different and you would be good too preperred if you implement VLANs in the future.

• Clone a physical server with converter

  When the cloning of a physical server with converter and selecting Configure the VM when completed does change on the physical server?

  My original physical server becomes inoperative?  I would rename the virtual server and give it a new IP address, but also want to continue to use the original physical server.

  Welcome to the community - but be aware that if you do not want to run two machines on the same network, your willingness to care about the host name and IP address to avoid confllicts.

• Create a simple internal network between two or more virtual machines

  Hello guys,.
  I just wanted to ask how to create an internal network between several virtual machines without the host must be a part of.

  I don't want that your network has a NAT, but I want to HOST a part of another network.

  
  I tried the changes on network cards, but does not work...
  Obviously with VMware Workstation 8

  Yes, your "Virtual Machine settings" - screenshot #1 - Select VMnet2 (for example).  Do this for each customer that you want on this private network, "Guest-only.  Note that you need to configure the network settings on each client within each guest OS; or have a guest to be a server with a dhcp server running that other clients can obtain an IP address configuration of.

• Private network between two or more virtual machines?

  I've been running an educational network configuration kind of base on esxi to work to teach their colleagues how running things. To do this I create a separate switch, connect the virtual machines to (only) the switch and run Ethereal on a machine with network in promiscous mode.

  Now, I would do it on my laptop. Can I do this with the merger? Can I network machines without connecting to the host (to ensure that there is no additional noise)? Can I configure a NIC in promiscous mode?

  sflanders wrote:

  I think the important part of the question is in regards to the networking VMs as they see, but not the host (btw merger networking of information: http://communities.vmware.com/docs/DOC-2527). Basically, it boils down to the host option only and the answer is no.

  In fact, the answer is yes because after that Virtual Machines are started can be simply down the vmnet1 network card and thus isolate the virtual machines between them.

  In other words on the network of Machines target virtual host-only and then start them up to the point where they receive their IP address DHCP host-only server, then in a Terminal on Mac (/ Applications/Utilities /) use the following command in low only Ethernet adapter of the host host.

  sudo ifconfig vmnet1 down
  

  Now the target of the Virtual Machines will be able to communicate only with each other and not the host.

  Note: You must down only Ethernet adapter of the host host after the virtual machines have acquired their IP addresses, because if you down the adapter before the Virtual Machines will not receive their IP addresses.

  The host only allows virtual machines to see the host, but it really shouldn't be any other "noise". Why do you have to be concerned about this?

  On the question of the noise, I think that VMware Fusion actually uses virtual hubs, no virtual switches (even if by mistake, VMware calls virtual switches), there is a risk of bleeding, and this has been discussed ad nauseam and various forums.

• trying to emulate another video card in my virtual machine

  Hi all

  I was wondering if anyone out there has a substitution method of the video card on the virtual machine - vmware svga2 currently it emulates.  I would like to install a software that is not compatible with the vmware curret svga2.  any thoughts?

  Thank you

  Forget it
  your options are VMware SVGA2 without the 3d support and VMware SVGA2 with 3d support - that's all

  If your software does not you can try only other machines virtual software such as VirtualBox or Parallels

  Parallels has a version that can use a videocard uptodate more on some machines, but all in all machines virtual video is old stuff compared to any recent real hardware

• While trying to see Planner installation and operation, the test in local mode, the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  While trying to see installation and operation Planner, the test in local mode with only 1 VM the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  There may be a lot of problems in the desktop VM. Agent service see Planner is not running in VM Office. You can check in the event viewer to see what kind of error occurs. The most usual error missing file IP.txt c; drive or harness IP in the IP.txt produce if there is.

• Best Design with 8 (4 x1GB + 4 10GB) physical network interface cards

  I'm about to deploy a new vSphere 5.1 (Enterprise license) environment and would appreciate a lot a little comments to some best practices and real-world experiences. For our cluster HA, we will use Dell R720 with Broadcom 5720 girls cards four ports 1 and 2 Intel X 520 DA connection to a Dell EqualLogic SAN PS6110XV (using the Extension Module from Dell for MPIO Multipathing).

  (Note: the iSCSI network will use two switches Dell PC8024F and the 'public' network will have two switches Juniper EX3300).

  I need to design best perf for HA, iSCSI, vMotion, and I would like to know tips for this design. Pls help me!

  Nice piece of Kendrick on this same track.

  Really a lot of ways to skin the cat

  http://www.kendrickcoleman.com/index.php/tech-blog/VMware-vSphere-5-host-NIC-network-design-layout-and-vswitch-configuration-major-update.htm

• Best design for the use of 8 physical network interface cards on a 5.1 ESXi host

  I have 8 physical network cards to work with on and 5.1 ESXi host using Enterprise Plus license.  I need to repair the following traffic:

  Management traffic

  vMotion traffic

  Virtual machine traffic (probably 2 natachasery will suffice for this)

  NFS traffic

  Won't fault tolerance.  Natachasery-how much should I dedicate to NFS, vMotion, and traffic management?  What failover policy I should use (active / active) (active / standby) for each?

  It is business more licensing and vSphere distributed switches are used.

  Thank you

  Yes, I would put the backup in the switch as well as management traffic and vMotion is they use vSS or vDS. The other option would be to reduce your vDS for NFS traffic of 4 natachasery 2 natachasery and then or to add to the existing vDS that contains management and vMotion VM traffic to add it extra bandwidth or create a new vDS with these 2 natachasery. But at the point of my original thought around creating a vDS is based on all of my bandwidth throwing together and then cut it but I want it and do not have to trade around natachasery after the fact. But there are so many different ways to achieve that is the fun part.

• MAC addresses of our network interface cards physical on the ESX host

  I asked a very interesting question.   What is the MAC address for each physical network cards within our ESX host.   Our host ESX3.5Update4 has 6 of them.

  I am able to ESXCfg allows to identify the vNIC but assimilates to the physical network adapters?   or, how can I find the MAC address of the physical network adapters?

  No, I mean there are additional MAC addresses that the switch can 'see '.  The service console interface have a MAC, and address that will be displayed if you run 'ifconfig', but vmkernel will not be displayed in this way, use "esxcfg-vmknic - l" to display this MAC address.  The virtual machine each have their own of the MAC you can get that from their configuration files, or the vi client.

  -KjB

  VMware vExpert

• Server with multiple network cards

  Hello

  I have a server with multi-port NETWORK adapter running ESXi 5.5.0

  Can anyone remind me how to allocate a VM to port a network?

  or point me to the URL of the full help?

  Thank you all

  The c# Client is that you need to install on your windows computer. The alternative would be the Web Client vSphere. Both are essentially 'vSphere customers. "

  Anyway, you don't need to restart. You can change the network as you want without having to reboot.