A problem occurred while resetting your PC

Hi all!

I'm sure you are familiar with by now Windows 8/8.1 is full of problems, large and small. My own worst prolems has to do with the mandatory update: all three days or if the computer is forced to restart and try to update only to fail. It takes always everytime.

So now, after having lived with the problem for a long time, I finally decided to resett the PC to factory settings and lost all my files (no backup). My NEW favorite, it's that this isn't posible.
Windows is preinstaled so I did not drive: I'm leaving the trial reset of systems, but after a few minutes, I get the message.
""A problem occurred while resetting your PC ","
and the process stops. There is an option to solve the problem, but the troubleshootingbox appears and disappears in a few seconds without doing anything at all.
The same thing happens when I try to refresh the computer in order to save my files. In short, nothing works.

Help, please. And if possible, do not post links to long manuals. Try to explain the problem/fix in your own words.

Thank you!

Hi Djuvik,

Thank you for your valuable response.

To answer your question, HP recovery partition is completely different from the real windows partition so I can explain this HP recovery partition must be intact.

http://support.HP.com/us-en/contact-HP

I hope this helps. Write to us for assistance.

Tags: Windows

Similar Questions

  • How can I fix tis (sorry, an error has occurred while processing your request.)

    When I try to go to traegergrills.com I get this message (sorry, an error has occurred while processing your request.) I can go on my other computer?

    This can be caused by corrupted cookies or cookies are blocked (check the permissions on the subject: permissions page).

    Clear the cache and cookies only from Web sites that are causing problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > Cookies: "show the Cookies".
  • In Windows Live Mail, I can't send emails. Get the notice "a problem occurred while trying to open this message. There was a problem. Please try again.

    In Windows Live Mail, I can't send emails. Get the notice "a problem occurred while trying to open this message. There was a problem. Please try again.

    The title says it all, except that it is a new development.

    Hi StanFortenberry,

    You can check out the following link and check if it helps:

    http://windowslivehelp.com/searchresults.aspx?query=A%20problem%20Has%20occured%20While%20trying%20To%20open%20this%20message.&ProductID=15

    You can also post your request in the Windows Live forum for assistance.

    Check out the link:

    http://windowslivehelp.com/product.aspx?ProductID=15

    Hope this information is useful.

  • BlackBerry Smartphones A fatal error occurred while updating your device software. Please try again.

    When the installation process is complete... reboot comes nxt and my BB device works now, after a few minutes, it was that appear "a fatal error has occurred while updating your device software. Please try again" and I unplugged my camera... my question is... is this error affect the stability or my DEVICE work?

    I need your answer

    Hi pasakaw

    Have you intrepted the update process anyway... maybe something went wrong shot, while this software update. Currently, what is the status of your BlackBerry is working correctly?

    If you feel any problem, then you should try a refill of OS using desktop software that will fix it any software glitches.

  • Windows Live Mail could not open the e-mail: "a problem occurred while trying to open this message. Please try again "."

    original title: cannot send an email

    Hello

    I use Windows Live Mail, with windows 7, but trying to produce a new email and clicking new mail I get an error report "a problem occurred while trying to open this message. Please try again "." This occurred following my mailbox is full. Since then I've erased my box and receives emails ok.  Ideas to fix this please because I am unable to answer the mail.

    Hello

    The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

    Windows Live Mail

    Windows Live Hotmail

    Windows Live Messenger

    Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.

  • Activating game FSX error "Unable to Activate Online, a technical problem occurred while accessing the server"

    Original title: FSX Activation game

    Gentlemen: after years of use in FSX (Microsoft Flight Simulator X).  Now, I ran into a problem of Activation. His version of "Unable to Activate Online, a technical problem occurred while accessing the server, license authorization was not successful, we apologize for any inconvenience"...  Support for the game ended last year. Is this in any way about this? Or is it temporary problem? "My first post" thank you... P.S. When MS comes out with a new Flight Simulator thanks...

    Gentlemen: Problem 'Resolved' I went in FSX.exe properties and on the Compatibility tab, Switched setting the compatibility to Win XP SP3 for Windows 7. And it worked the active game. Thank you

    for the info and try to help. Simple, I hope someone else can learn from this. Thank you!

  • Errors of blackBerry Smartphones My World ' year error occurred while updating your application list.

    Whenever I select my world of the web page, I'm prompted for my blackberry id username and password, if I get the right user name and the password that it continues to ask me for my credentials, everywhere else looks that I am enrolled in fine with my code. On my Blackberry, I get the error "year error occurred while updating your application list" when I opened my world. I contacted Rogers for support and they told me that I have to contact Blackberry

    Edit: I already tried ALT RST. And I tried different phones as well. Using a different ID for Blackberry works fine.

    Rogers took a week to move to the Blackberry on that. It was a bug in version 3 of App world that they felt was set at 4, I am now the 2nd person to report in the last two weeks.

    Basically, I've had too many blackberries and too many applications in my App World and the list is time when pulled.

    So his way for BB to developers to get fixed.

  • Failed to save the system or create the image of the system, error: the problem occurred while trying to connect with the VSS writers (0 x 80042318).

    Original title: cannot backup Windows 7 system.

    When I try to back up the system or create the image of the system I get the following message, the error was detected in the Volumn Service VSS (Shadow Copy) the problem occurred while trying to connect with the VSS writers.  Verify that the event system Service and the VSS service are running and look for errors related to event logs. (0 x 80042318).

    Hi bernardolahoustino,

    Please keep us informed. Please let us know the State of the question, so that we can help you further.

  • BlackBerry Smartphones A fatal error occurred while updating your device software

    I have a problem I hope you guys can help me.

    Blackberry model: 8820
    Device software version: 4.5.0.55
    Desktop software version: 4.7.0.37

    Carrier: Singapore Telecom Mobile Pte Ltd (https://www.blackberry.com/Downloads/browseSoftware.do)

    Whenever I start my desktop software, he would invite me there are newer versions for some applications in my blackberry as my browser, brickbreaker etc. So I followed through their instructions to install these updates. When he reached step 3/11, an error occurs while he says he tried to turn on my radio

    Here is the screenshot of the error:

    [URL =http://img199.imageshack.us/i/errortac.jpg/] [IMG] http://img199.imageshack.us/img199/761/errortac.th.jpg [LINE] [URL]

    But I observe that @ task 1/11, it turned off my radio. @ Task 3/11, he tried to turn it back on. This is then the error has occurred.

    When I disconnected my device after the error, I saw that my mobile connection was turned off my blackberry had to re - login again. I have to admit that my area has pretty bad reception, but that can't be the problem right?

    In addition to this, perhaps I also enjoy bursting another 2 questions:

    (1) why can't I set up my email? I followed the instructions here:

    http://NA.BlackBerry.com/eng/support/blackberry101/Setup.jsp#tab_tab_email

    but my Setup Wizard do not have the option to select "I want to create or add an email address.

    I give myself the opportunity to the company mail

    (2) I tried access the blackberry site you using my blackberry, but it says my device is not supported. Any way to solve this problem?

    Does that help?

    http://www.BlackBerry.com/BTSC/KB02696
    Cannot complete the load operation. Unrecoverable error occurred during the update of Pocket

  • Windows 8, an error has occurred while entering your pin code

    I have installed windows 8 pro on my laptop but I'm unable to create the password for PIN or password photo. creating password pin he gives the error message that occurred then that capture your PIN, please try again later and creating picture password it gives error message enlisted fail. The problem persists even after creating another account/local account. Help, please. I've already paid Rs.2000 this windows 8, please solve my problem

    Well, finally found the solution after 3 days of searching.

    Credential Manager Service has been disabled.

    1. Go to RUN (Win + R key)
    2. Type services.msc
    3. Scroll to Credential Mnager Service
    4. Right click and go to properties and change the Startup to automatic type
    5. Start the service

    Now you should be able to edit/create the PIN. Answer if the problem persists.

  • Computer Smartphone blackBerry sees 9530 but to get "a problem occurred while trying to connect to the Blackberry device" invites


    http://vzw.SmithMicro.com/BlackBerry/ is the place where led (download your software for your mobile operator device). It does not help it only gives Office Update for the desktop software. I'm dead set how to solve this problem so still working on it.

    Problem

    The BlackBerry smartphone has not detected as a USB mass storage device when connected to my computer, even if it was lit.

    Solution

    And this only solved it was this link: Blackberry Knowledge Base
    I had to download under the Article KB19717 the link to the fix below in the calfix.exe page

    He got the phone working properly now I get music, files and photos!

  • Problem occurred while loading file Java in the database XE

    Hello

    When I use loadjava-user system/pwd@XE E:\SendMailpdf.java, it gives me following error

    Error creating source OARSMailSend/OARSSendMailpdf
    ORA-06550: line 1, column 74:
    PLS-00905: object SYSTEM. DBMS_JAVA is not valid
    ORA-06550: line 1, column 74:
    PL/SQL: Statement ignored
    ORA-06550: line 1, column 230:
    PLS-00201: identifier 'NameFromLastDDL' must be declared.
    ORA-06550: line 1, column 224:
    PL/SQL: Statement ignored

    The following is not
    OARSMailSend/OARSSendMailpdf source: creation (failure)
    output: failure occurred during treatment

    Could someone tell me the right way to insert the java class file in to the XE database

    Thank you

    Hi again!

    If you want to send an E-Mail from an APEX application, you can use the APEX_MAIL package. Another package for sending mails is UTL_SMTP.

    Yours sincerely

    Florian W.

  • Problem occurred while in vcard parsing

    Hello

    ("I'll have a vcard (.vcf file) and when I try to analyze this vcard using the method contactFromVCard("asset:///newfile.vcf ") , the returned contact object is always empty.

    So I checked the Contact: isValid() method to check whether the contact is valid or not. It shows that the contact is incorrect and not able to get the coordinates of this object.

    I tried to analyze vcard with different versions (2.1 and 3.0), but I still get the contact as an invalid.

    Even if I tried to generate vcard using the method contactToVCard (c.id ()) and parse generated using vcard above method, I am making contact as an invalid.

    Vcard format is as follows, which I use for analysis:

    BEGIN:VCARD
    VERSION:3.0
    PRODID:-//Research In Motion//RIM App//EN
    UID:6
    FN:Test Trst
    N:Trst;Test;;;
    TEL;TYPE=CELL:9999999999
    END:VCARD
    

    What should be the problem?

    Thank you

    Hi sanshah90,

    contactFromVCard method takes a vCardData as an argument not the path of the vcf files. QFile use to read data from file switch argument of the method.

    QFile file("filepath");
    file.open(QIODevice::ReadWrite);
    Contact c = ContactService().contactFromVCard(file.readAll());
    file.close();
    
  • Error: A problem occurred while uninstalling (- 1).

    Separated from this thread.

    I have a Windows 7 laptop, how do I register with a Windows 7 and I follow the same steps you showed TrevereTaylor or is it different?

    Hello

    You can try the fixit from here.

  • Password reset disk error - "year error occurred while the wizard attempted to set the password for this user account.

    Hello!

    -A bit of background: the desktop PC that I use is Windows Vista Ultimate Edition, with active user accounts total five. I have my own account, and I can access the computer through (or through account from my brother, because I know its password).--

    I had this problem recently came where the administrator password (that I know for a long time and never changed) no longer works. So, after some research, I created a reset password on a USB disk, that I found in my house. I managed to create the disc, but when I tried to put the new password, I got the message error "an error occurred while the wizard attempted to set the password for this user account', which I must say is not very clear. I found a few methods of force - reset the password for the account of the admin, as using a sort of Windows Vista DVD or go to Safe Mode to find the hidden administrator account... but I have no idea what this DVD is or where to find, and in Safe Mode, there is no account user administrator to be seen. I believe that my machine is corrupted, but I don't want to buy a new. I want just to reset a password...

    Any help is appreciated. If I was not specific enough, I can specify in comments.

    Thank you!

    Hello

    You must make a password reset disk before that there are problems with a password, not afterwards.

    ________________________________________________________________

    Read this for your problem:

    http://support.Microsoft.com/kb/940765

    If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

    You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

    • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
    • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
    • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
    • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    _____________________________________________________________

    Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

    Here's information from Microsoft, explaining that the policy:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

    See you soon.

Maybe you are looking for

  • Reverse calendar alarms

    After the recent update 9.3.2,and I am unable to set up the first and the second alarm in sequential order.  Seems reversed, as I put the first alarm for 2 hours, then the second alarm 30 minutes. When I will review prior to registration, they become

  • How can I remove advertising blocker more?

    Anyone know how I can remove the app Ad Blocker Plus?

  • Indicators of compensation each running program

    I know there are a lot of suggestions offered on this forum about how clear the flags whenever a program runs. I tried everything I found on this forum site. I really need help here. I thought go on Preferences VI, then running, then clear indicators

  • Reinstalling XP Home on Compaq Mini 110 c-1100SO PC

    I'm currently trying to reinstall windows XP Home on my old Compaq Mini 110 c. However, the installation can not find the drivers for the HARD disk The drive is a SATA HDD and I can't find the disks in the standard list of selections of pilots. Windo

  • EasyEject does not

    Hello. I have a problem with the EasyEject utility on my T500 (2082 - 53G with Windows Vista Ultimate SP2 x 64). After pressing Fn + F9, my DVD - RW drive is not listed. Also, when you click on configure some Actions EasyEject the windows that appear