A problem on your computer is preventing updates to be downloaded or installed

Similar Questions

• Problem: A problem on your computer is preventing updates to be downloaded or installed

  I spent the last day trying to solve this problem.  I started with critical updates that should be applied.  I tried to run windows update in order to install, but it still fails.  When I'm going to update the story it shows no failure so I can not get the error message.  I visited the Microsoft Update Solution Center and tried on the two recommendations of the article on the updates failed.  http://support.Microsoft.com/kb/943144 none worked.  I tried running the FixIt bound in another post on this forum and it did not fix it http://support.microsoft.com/kb/971058.  Running out of idea of here.  I appreciate any support.

  I am running Windows XP SP3

  Zane,

  Diagnose this WGA test, connection to MS, who work the scripts.

  http://www.Microsoft.com/genuine/diag/

  Reset

  For XP

  Go ahead and download Dial-a-Fix.

  http://wiki.djlizard.NET/dial-a-fix

  Scroll down about 2/3 of the way to download Dial-a-fix

  Click on the green tick Double, then click Go.

  Reset

  Try it

  http://windowsupdate.Microsoft.com/

  and D/L your updates

  See if the system can update now.

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• computer automatically starts in safe mode without prompting, a problem with your computer might be preventing Windows from start normally__

  computer automatically starts in safe mode without prompting, a problem with your computer can prevent Windows to start normally

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• Error: "corrupted error reports are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer. »

  Original title: my computer was "rebuilt" with all the new parts June 2011. Logging on his shot and miss it may stay on or shut down and restart. I have this message when I turned on my pc this afternoon:

  Corrupted error report.

  Unfortunately, the error you report submitted is corrupted and cannot be analyzed. Reports "damaged errors are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer.

  When I turned on pc today is showed a blue screen and can something on a disc because the disc did not work properly?

  I paid for all the new parts for my computer and the computer technician has assured me that all the work was completed and correct. I bought the power supply (1) mother board, cards (2) 1 TB of memory. (2) hard drives 1 TB. (1) card reader and other elements appearing on my Computer Geek Bill.

  My music files are no longer mp3 but .oma. He/the Tech added its own files and records of music of World War II. These game. The drive D drive or slave who held my music, he said he wiped clean.

  I need to know these error reports will completely close my pc and all the information will be lost?

  Hi satindoll11233,
   
  I recommend you to disable the auto reboot system error (this option prevents Windows to reboot automatically if a Windows error to fail) of the startup options safe mode to know the exact error message or error code originally this problem.
   
  For more information, see:

  A description of the options to start in Windows XP Mode

• I get a message on the tool bar saying that "solve problems on your computer.

  I get a message on the tool bar saying that "solve problems on your computer" and then I click on it, among the many solutions I get the msg "Windows Defender has stopped working properly" and I guess the solution is to update windows, what I did, but I still have not the same msg. Can someone please? Thank you

  Hello

  1. are you referring to the toolbar of internet explore?

  2 have you installed a third party toolbar?

  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Otherwise, I suggest you to give us more information about the issue so that we cam help you better.

  It will be useful.

• Oh no! There is a problem with your recent payment. Update the details of payment for uninterrupted service.

  Hello

  I get this message:

  
  Oh no! There is a problem with your recent payment. Update payment details for uninterrupted service.

  But I have no idea what the 'problem' and payment information are correct...

  What should I do? It seems impossible to contact any Adobe
  

  Hi liamg9149512,

  I see that the payment issue is now resolved with your account.

  Please let us know if there is anything else, we can help you.

• Updates will not download and install - NO ERROR CODE - updates remain at 0%

  For Adobe Support.

  I get the popup "update" whenever I connect to my computer and it gives me an error message but no code error. The update starts at 0% and stays there indefinitely.

  It's VERY frustrating because on top of working 10 hours today, I have now lost another hour, trying in vain to find a solution.

  By quitting their stand alone suite (CS5, 6 etc) and later support for it, Adobe has FORCED me to use their Cloud Creative suite subscription. While I HATE not being able to buy a standalone program, I like the CC Suite and I'm PAYING for this subscription that provides the latest updates. Now, all of a sudden the updates will not download and install and Adobe wants me to follow a set RIDICULOUSLY long and complicated steps to solve the problem? It's a complete and absolute nonsense!

  I am a self-controlled, respectable and intelligent individual, but it makes me want to use profanity! I HAVE NO TIME FOR THIS NONSENSE.

  According to the latest information (see: Adobe : Cloud accelerates since 3.4 million paid creative members |) ProDesignTools) there is over 3.4 million people like me PAY for reliable use!

  Frankly, I'm so frustrated that I am very close to spearhead a national campaign to educate these users 3.4 million on the negligence of Adobe supported because it's visitors!

  WE SHOULD NOT HAVE TO SOLVE THE PROBLEM! ADOBE NEEDS TO SOLVE THE PROBLEM! When you get this figured out, I'll certainly appreciate an e-mail from your. In the meantime. Be aware that each passing day, and whenever I see this pop up, it serves as a reminder that Adobe does not respect what they promised!

  Kind regards

  Brian Heckman

  EMAIL: [email protected]

  Hello

  If it you please restart your computer and then try to install updates again.

  If this does not work, follow the steps mentioned in this doc. KB troubleshoot Adobe Creative Cloud download and installation of the questions for help.

  Kind regards

  Nicos

• Windows Update keeps in downloading and installing KB979909, KB982524 KB982168, KB2604829, KB26536352, KB2656369, KB2686828. constantly.

  Windows Update keeps in downloading and installing KB979909, KB982524 KB982168, KB2604829, KB26536352, KB2656369, KB2686828. constantly. I checked the list of installed programs, and they are already installed. How to stop these downloads without stop the automatic updates.

  Regards Terry Hadigate

  Terry,

  See the article after some troubleshooting for your question:

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339/en-us >

  Please let us know if it did or did not help to solve your problem.

  UTC/GMT is 10:59 on Saturday, July 21, 2012

• Windows update fails to download and install updates and cannot start defender and windows firewall.

  Original title: windows update fails problems to download and install the updates and windows firewall and defender will also not start?

  Windows update fails to download and install the updates and defender and windows firewall will not also start? What can I do?

  Hi Speete66,

  ·         You receive an error message or error code in Windows Update?

  ·         What happens when you try to start the windows firewall and windows defender? You receive an error message?

  ·         You have any other antivirus software or protection installed on the computer?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check if it helps.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

   

  Method 2:  If the method above does not help, then you can reset Windows Update components and check.

  Reset Windows Update components.

  http://support.Microsoft.com/kb/971058

  You can also view the article mentioned for more information below:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Let us know the results.

• updates the driver downloaded and installed automatically.

  How can we change windows update settings so that the updated driver are downloaded and installed automatically.

  Hello
   
  Click on the following link to see a demonstration on how to put the driver updates to be downloaded and installed automatically.
   

  Update your drivers automatically

  Hope that helps.

• Event Viewer windows will cause problems with your computer

  Windows Vista Ultimate: Will be the windows event viewer are causing problems, such as freeze ups, slow down, with your computer?

  There is never for me, and I never heard him make.

  I hope this helps.  Good luck.

• Service of Windows 7 SP1 Windows update fails to download or install updates

  I have a fresh Windows 7 SP1 no sysprep build running in VMware Workstation 12.1.1 build-3770994.  When I run windows update to pull down the updates for this operating system, the first thing he does is download the Windows Update 7.6.7600.320 and then client looks like it is pulling down of 357 updates, but they never settle. I found them in the C:\windows| C:\Windows\SoftwareDistribution | Download the directory where to stay.  In programs of updates installed under control panel I have Hotfix for Windows (KB2534111) and (KB976902) installed and wndows udpate has the new top installed client. I installed as part of the construction of framework Microsoft .net 4.5.2

  This did never happen before the release of Windows 10?

  Here's what's in the WindowsUpdate.log file:

  2016-06-02 17:40:17:350 816 Agent 3 b 0 WARNING: has no rule Installed, updateId = {818701AF-1182-45C2-BD1E-17068AD171D6}.104, hr = 80242013

  2016-06-02 17:44:52:976 816 Agent 3B 0 * WARNING: impossible to filter the results of the search, error = 0x8024000B

  2016-06-02 17:44:52:976 816 3 0 b agent *.
  2016-06-02 17:44:52:976 816 Agent 3B 0 * END * Agent: finding updates [CallerId = AutomaticUpdates]
  2016-06-02 17:44:52:976 816 3 0 b agent *.
  2016-06-02 17:44:53:070 816 3 b 0 report REPORT EVENT: {6BB53B62-4F6C-4DB1-8281-C347E39A0B2E} 2016-06-02 17:39:58:421 - 0700 1 202 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates success content install Reboot completed.
  2016-06-02 17:44:53:070 816 3 b 0 CWERReporter finish event management report. (00000000)
  2016-06-02 17:44:53:070 816 7f0 report CWERReporter finish event management. (00000000)
  2016-06-02 17:44:53:241 816 7f0 Service *.
  2016-06-02 17:44:53:241 816 7f0 Service * END * Service: out of Service [exit code = 0 x 240001]
  2016-06-02 17:44:53:241 816 7f0 Service *.

  2016 06-02 808 9f0 Misc 17:47:45:933 = logging initialized (build: 7.6.7600.320, tz:-0700) =.
  2016-06-02 17:47:45:949 808 9f0 Misc = process: C:\Windows\system32\svchost.exe
  2016-06-02 17:47:45:949 808 9f0 Misc = Module: c:\windows\system32\wuaueng.dll
  2016-06-02 17:47:45:933 808 9f0 Service *.
  2016-06-02 17:47:45:949 808 9f0 Service * START * Service: Service startup
  2016-06-02 17:47:45:949 808 9f0 Service *.
  2016-06-02 17:47:46:121 808 9f0 Agent * WU client version 7.6.7600.320
  2016-06-02 17:47:46:121 808 9f0 Agent * Base Directory: C:\Windows\SoftwareDistribution
  2016-06-02 17:47:46:121 808 9f0 Agent * access type: no proxy
  2016-06-02 17:47:46:121 808 9f0 Agent * network state: connected
  2016-06-02 17:48:32:999 808 CWERReporter::Init successful 9f0 report
  2016-06-02 17:48:32:999 808 9f0 Agent * Agent: initialization of Windows Update Agent *.
  2016-06-02 17:48:32:999 808 9f0 Agent * prerequisite roots succeeded.
  2016-06-02 17:48:32:999 808 9f0 Agent * Agent: initialization of the global parameters cache *.
  2016-06-02 17:48:32:999 808 9f0 Agent * WSUS server:
  2016-06-02 17:48:32:999 808 9f0 Agent * state WSUS server:
  2016-06-02 17:48:32:999 808 9f0 Agent * target group: (Unassigned Computers)
  2016-06-02 17:48:32:999 808 9f0 Agent * Windows Update access disabled: No.
  2016-06-02 17:48:33:045 808 9f0 DnldMgr Download manager restoring 0 downloads
  2016-06-02 17:48:33:045 808 9f0 to THE # to THE: initialization of automatic updates.
  type of approval # to THE 2016-06-02 17:48:33:045 808 9f0: on demand (user preference)
  2016-06-02 17:48:33:045 808 9f0 to THE # scheduled install date and time: every day at 06:00
  2016-06-02 17:48:33:045 808 9f0 to THE # automatically install minor updates: Yes (user preference)
  2016-06-02 17:48:33:045 808 9f0 to THE # will interact with non-admins (Non-admins are high (user preference))
  2016-06-02 17:48:33:061 808 9f0 the installation phase to THE adjustment to THE planned for 2016-06-03 13:00
  2016-06-02 17:48:33:545 808 9f0 report * report: initialization of static data to report *.
  2016 06-02 808 9f0 report 17:48:33:545 * OS Version = 6.1.7601.1.0.65792
  2016 06-02 808 9f0 report 17:48:33:545 * OS Product Type = 0 x 00000004
  2016-06-02 17:48:33:576 808 9f0 report * computer brand = VMware, Inc.
  2016-06-02 17:48:33:576 808 9f0 report * computer model = VMware virtual platform
  2016-06-02 17:48:33:576 808 9f0 report * Bios revision = 6.00
  2016 06-02 808 9f0 report 17:48:33:576 * name of Bios = PhoenixBIOS 4.0 Release 6.0
  2016-06-02 17:48:33:576 808 9f0 report * the Bios Release Date = 2015-07 - 02 T 00: 00:00
  2016-06-02 17:48:33:576 808 9f0 report * locale 1033 = ID
  2016-06-02 17:48:33:623 808 to THE 9f0 successfully wrote event to THE health state: 0
  2016-06-02 17:48:33:623 808 9f0 updates to THE initializing featured
  2016-06-02 17:48:33:623 808 9f0 to THE Found set 0 cached updates featured
  2016-06-02 17:48:33:623 808 to THE 9f0 successfully wrote event to THE health state: 0
  2016-06-02 17:48:33:623 808 to THE 9f0 successfully wrote event to THE health state: 0
  2016-06-02 17:48:33:623 808 9f0 to THE delayed finish to initialize
  2016-06-02 17:48:33:623 808 9f0 to THE #.
  2016-06-02 17:48:33:623 808 9f0 to THE # START # to THE: research updates
  2016-06-02 17:48:33:623 808 9f0 to THE #.
  2016 06-02 808 9f0 17:48:33:685 to THE<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
  2016-06-02 17:48:33:872 808 a8c Agent *.
  2016-06-02 17:48:33:872 808 a8c Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
  2016-06-02 17:48:33:872 808 a8c Agent *.
  2016-06-02 17:48:33:872 808 a8c Agent * Online = No; Ignore download priority = No
  2016 06-02 808 17:48:33:872 a8c Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction or IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
  2016-06-02 17:48:33:872 808 a8c Agent * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
  2016-06-02 17:48:33:872 808 a8c Agent * Search Scope = {Machine}
  2016-06-02 17:49:12:950 808 a8c Agent WARNING: has no rule Installed, updateId = {818701AF-1182-45C2-BD1E-17068AD171D6}.104, hr = 80242013

  I don't know where the above rule is or how to fix.  Microsoft has changed in the update of windows server that is causing the problem?

  Disconnect your computer from a network or network drive:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disconnect-your-computer-from-a-network-or-network-drive

• Windows update is not download and install Service Pack 1, 2 3

  Did a fresh install of Vista 32 bit Home Premium on Acer Extensa 4420. After repeatedly run Win Update and installation of more than 60 update updates said that I was aware. HOWEVER, SP - 1 was not detected as missing but was necessary for the other software work. I found SP-1 and installed manually. Now Win Update refuses to download Service Pack 2, so of course it also doesn't download Service Pack 3.

  Why is Win defective Update and do not install it no matter what Service Packs?

  Do I have to manually install SP2 & SP-3 or should I wait until I discovered problems or get a virus or another bad thing because Win Update did not bother to run properly?

  Did a fresh install of Vista 32 bit Home Premium on Acer Extensa 4420. After repeatedly run Win Update and installation of more than 60 update updates said that I was aware. HOWEVER, SP - 1 was not detected as missing but was necessary for the other software work. I found SP-1 and installed manually. Now Win Update refuses to download Service Pack 2, so of course it also doesn't download Service Pack 3.

  Why is Win defective Update and do not install it no matter what Service Packs?

  Do I have to manually install SP2 & SP-3 or should I wait until I discovered problems or get a virus or another bad thing because Win Update did not bother to run properly?

  ===========================================
  I think it may be better if you download full
  files on your desktop and then install from there. And... BTW...
  There is no Vista SP3.

  Once you have the file on your desktop, it can be a useful
  try to unplug the net and turn off your anti-virus
  before installing.

  The following links may provide something useful... the links are
  intended for 32-bit and 64-bit versions.

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1
  (expand the section: "manually install SP1 using the ')
  Microsoft Download Center")

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://Windows.Microsoft.com/en-GB/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2
  (expand the section: "manually install SP2 using the ')
  Microsoft Download Center")

• Windows 8 auotmatic updates do not download or install

  I recently bought a new PC with Windows 8 and discovered that patches will not download and install via Windows Update.  I can see there are patches and patches to install but when I click on the button install updates, downloads to hang and I finally shut down my system.  I tried several of the recommended solution, I found online without success.  Is there a problem with Windows 8, application of automatic updates?

  Thank you for your help.

  If you haven't done so already... Try the windows update troubleshooting 8 more aggressive than you can download from this page.

  http://support.Microsoft.com/kb/971058

  Yet once if you haven't tried the DISM scans, they will set some problems updating too... Since the prompt command (admin)

  DISM / Online/Cleanup-image /Scanhealth
  DISM / Online/Cleanup-Image /RestoreHealth

      they take about 15 minutes each