a problem with the display of window margins and columns

Similar Questions

• Problems with the installation of windows updates and reboot the computer

  When you try to restart the computer it freezes on "installation updates.do not turn off computer.". Currently have 20 updates which will not be installed. computer says CCC.exe prevents the computer from restarting and getting error code 80240016 when you try to install the updates

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/957307

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, are kindly Error Codes and exactly what happens when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems with the display of the 3D graph

  Hello world

  I use a 3-d chart in one of my screws and I have problems with the display. See what it shows by yourself:

  

  So, as you can see, the chart does not correctly display the data. But one thing I know, is that the data are sent correctly, because when I copy the LabVIEW graphic and paste it into paint, what I see, this is the graph displayed correctly:

  

  Anyone know what may cause the problem? I also have a similar problem with a waterfall in 3D.

  You can always download the updates of ni.com so.

  I also went through a documentation on known LV 2011 issues. I was able to find something interesting onthis page:

  3D image controls can display transparently or LabVIEW crash on some graphics cards

  The 3D Picture Control is based on an OpenSceneGraph that uses OpenGL. It was noted several reports of the 3D image control crashing LabVIEW. In almost all cases, it was an Intel graphics integrated into question. This accident is due to a mismatch of the graphic material. Note: most 3-d charts use the 3D picture control

  Some possible workarounds are:

  • Update the video driver
  • Enable/disable hardware acceleration
  • Enable Aero in Windows 7
  • Disable Aero in Windows 7

  I might try these workaround solutions and see if any of them work for you.

• "A problem with the display driver.

  Recently, I get an error message whenever I open Photoshop CS4. It reads as follows.

  "As Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  "GPU improvements can be enabled in the Performance preferences panel."

  I checked the graphics cards in Device Manager, and when I tried to update the software, it told me that I was aware.

  • OS: Vista Edition Home Premium
  • Dell Inspiron 1520
  • Display driver: NVIDIA GeForce 8400 M GS

  Sincerely, Danny

  Hello

  Try to update your display manually driver and do not use the analysis of the drivers on the manufacturer's website either.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Photoshop has encountered a problem with the display driver cs6 - win7 64 bit

  Hello

  I installed collection CS6 Mater, whan I tried to enter in photoshop I got this window «photoshop has encountered a problem with the display and temporarily disabled driver development using graphics hardware...» »

  Whan I get is window, the "parameters of the graphics processor is gray - «photoshop detected a problem in your display driver...»» »

  I have laptop with AMD Radeon R7 M260

  Win7 64 bit

  PC Toshiba laptop satelite l50 - b

  Hi doriv,

  • Update your graphics card driver.
  • You have the graphical configuration Swichable?
  • As Mylenium says you must add this parameter in graphic control panel so that Photoshop can detect your card.
  • Open graphic switchable Configuration and add sniffer.exe and Photoshop.exe (from C:\Program Files\Adobe\Adobe Photoshop Cs6). See graphics switchable troubleshooting questions unde... | Community

  

  Kind regards

  Assani

• Problem with the display of Adobe PDF documents

  Problem with the display of Adobe PDF documents

  I have a Windows 7 Home Premium computer

  I read all the suggestions and I tried to download several versions of Adobe Reader for Windows 7 and Vista http://get.adobe.com/reader/otherversions/.

  Before you download each version, I would delete the current version with uninstalling programs for the control panel.

  After each new installation I shut down the computer and restart the computer.

  I tried to download the versions with and without going through my antivirus (CA Total defense) running.

  After downloading, I thought that the version downloaded successfully.

  I have read the help of Acrobat http://helpx.adobe.com/acrobat/kb/troubleshoot-reader-installation-windows.html and followed the instructions.

  None of the above helped.

  The problem is that any version of Adobe Reader, download, I can't open a PDF file and read it. Or the drive itself will remain open.

  1. If I try to open the drive from the desktop link or real program menu, the Player opens for 5 seconds and then closes spontaneously. If I try to click on the Player menu (File, Edit, View, window, help, tools), then an alarm will sound and the menu does not open. Soon after, the reader is closed.

  2. If I try to open the drive by double clicking on a PDF file then the Player opens but the document is not displayed (only the grey player screen PDF is specified), then the drive closes after 5 seconds on its own.

  The desktop shortcut shows like 'red icon Adobe Reader'. But the real program menu icon shows as empty a folder icon.  All documents in PDF format displayed as Adobe PDF icon.

  I tested several PDF files and none will open on this computer, but they will open on other computers.

  I created a word document and saved as a PDF file. It looked as if it had record properly (a the appropriate icon) but when I try to open it according to point 2 above the document is not displayed and then then the drive closes after 5 seconds on its own.

  Anyone have any ideas on what is happening and how can I fix?

  Could you please respond in this forum and send me an email at [deleted]

  I'm so confused and frustrated.

  I would try Windows Explorer, navigate to C:\Program Files (x 86) \Adobe\Reader 11.0\Reader, and then double-click Eula.exe and accept the license agreement

• Problem with the installation of Windows XP on the Satellite A200-1RK

  Hello!
  I ve you have a problem with my laptop.
  I would like to install Windows XP SP2 instead of Vista, but I had a problem with the hard drive,
  Windows XP Installer cannot find the hard drive. It is problem with drivers disk, but the site of tohsiba I can´t find my laptop and the disk for XP drivers.
  Why?
  Can someone help me?

  Maybe I can use drivers from another laptop A200 series, but which?

  Hello
  a good explanation how to install XP on a SATA machine can be found here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=29342

  Welcome and good luck

• I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Photoshop has been giving me the warning:

  Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

  No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

  Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).

• Photoshop has encountered a problem with the display driver

  I've updated photoshop on my mac last night as it kept prompting me to do, and I have an exam tomorrow, which requires the use of photoshop. When I open photoshop this morning the following message appears:

  "Photoshop has encountered a problem with the display driver and has temporarily disabled the improvements using graphics hardware. Visit the Web site of the manufacturer for the latest version of the software. For more information, visit: http://www.adobe.com/go/photoshop_gpu_cc_en'. '.

  Can someone help me with this? IT IS URGENT!

  The problem is the driver for your video card, no Photoshop.

  Update the video card driver from the website of the manufacturer of the GPU (NOT Microsoft or a system integrator).

• I have a problem with the drag (cursor snap) video and audio stuttering!

  I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering.  my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine.  Are there updates or the settings that I can apply to correct this problem?

  http://www.eMachines.com/support/drivers.html

  The latest drivers/software for your machine come directly from eMachines.

  Click the link above for them.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems with the display after the update of Windows

  Hi guys,.

  I have not installed or updated all programs on my computer for at least a few weeks, with the exception of Windows Update, so part of MS updates, nothing has changed in recent weeks.

  A few days ago, my computer (HP dm1 laptop computer) screen acted funny - I took a screenshot of what happens and posted here:

  http://DL.dropbox.com/u/1076277/desktop_problem.jpg - basically, the display is all messed up with repetition of lines, etc.

  At first I thought it could be a driver problem, but the drivers are ok and were not being updated - in fact, in addition to the usual updates, the only new was the new update now live.

  I did a system restore (restore a week) and everything seemed normal again - this problem is intermittent, but very frequent, but within a few hours of use, there is no problems - until I run Windows Update, and it all started again...

  Any suggestions as to what might be the cause of the problem and a solution? I don't really have the time now to keep stable each item in the update...

  Thanks for the help.

  Hello

  If you want to study, it will take time but you can find the offending update.

  First update all updates (redundant, uh?).

  Make a note of all of the updates (KB numbers, etc.).

  Restore and install the updates one by one and not simultaneously.

  This way you can find the update 'wrong' and later come to conclusions based on what it is supposed to fix.

  Carlos

• I have a problem when using Google Maps, at a certain point my custards computer window and says there is a problem with the display drivers and he recovered, but it is not. Problem does not occur with Int Explorrer, so I don't think it's the computer

  When using google maps via Firefox, after asking a place which is not the General section of North America who comes up regularly, the firefox screen becomes white with a narrow banner at the top. A message appears in the lower right corner that says something on display drivers having had a problem, but now have been recovered. However, the display is not recover and the message of the banner is that Firefox is not responding. When I go to restart Firefox if I'm about to restore, the page is still frozen.
  I don't think there is a problem with my computer because it doesn't happen if I used to go to google maps, then G-cards works normally.
  This phenomenon didn't happen before the last update Google or Firefox. I used Fiefox for some years and also Google Maps on previous computers and on this one and not had it before.
  It is a relatively young computer (Asus EeSlate 121) less than a year. I have used Firefox since I bought it and until recently had no problem with Google Maps.

  I solved it myself, after the 'note' that was FF/Mozilla, just as I finished my message, commenting on what it was that my system was, I wnnt back to check my plug-ins, etc. I downloaded the latest Java, the TWO 32-bit AND 64-bit versions and latest Firefox.
  Now everything works.
  Thank you
  B.

• Problems with the display settings in Windows XP on my acer aspire netbook

  Lack of custody of my office and the bottom was always blue. When for example I opened the menu options for DIVX it's all close together and the window is way to big for the screen I can't see all of the screen. Also problems with the connection to my netbook to the TV. It should never be on the screen and I can't understand how difficulty. Any suggestions

  Hi CharlesHefty,

  1. do you get an error message or error code?

  Check the event viewer for the newspapers of the related events that could help us solve the problems:

  Procedure to view and manage event logs in Event Viewer in Windows XP

  I suggest you try the steps from the following links in the article and see if it helps:

  How to solve problems of hardware and software drivers Windows XP

  How to configure and use multiple monitors in Windows XP

  Overview of multiple monitors

  I hope this helps.

• Problem with the display of a video frame in Windows Media Player 11 on Vista

  Hello

  I am having some problems with the Windows Media Player 11 on Vista. On my XP machine, when I discovered a video frame by frame, it works perfectly back and forth. However when I try to play the same video on my Vista machine, the button to the front of the image works perfectly fine but the previous image button takes video from 5 to 10 frames. Since I use my machine Vista more and need this feature often enough, it gets boring very quickly. It is a drive problem (since the same player works great under XP with the same video) and can be solved with a patch or some sort?

  Thank you

  Hello Helloaamir,

  Thank you for posting.  I understand the problem you are having, but I do not understand why in the need for these features.  Depending on what you're trying to do, may be able to use Movie Maker instead of it you also has characteristics of the image by image.  If you could include that you are using this feature, because I can give you a good alternative or possible difficulty of deliverance.

  Looking forward to help you any further. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• A problem with the display in a form with a ScatterGraph

  Hi all!
   
  Now, I want to do an image that can be expanded outside and inside with the viewport in a form with a ScatterGraph window. I tried previously to do this picture as a backdrop, but the backgroundpicture cannot be zoomed with the display window. How can I solve this problem?

  Here is the picture:

  

  Or I have to calculate a large amout of points to sign on the coordination of xy without the image, and how can I register quickly because it takes a long time to calculate.

  Hello

  You can zoom/dΘplacer an image as well as the plot in charts. Here is a snippet of code showing how you can do it.

  Normal
  0

  fake
  fake
  fake

  EN-US
  X NONE
  X NONE

  MicrosoftInternetExplorer4

  / * Style definitions * /.
  table. MsoNormalTable
  {mso-style-name: "Table Normal";}
  MSO-knew-rowband-size: 0;
  MSO-knew-colband-size: 0;
  MSO-style - noshow:yes;
  MSO-style-priority: 99;
  MSO-style - qformat:yes;
  "mso-style-parent:" ";" "
  MSO-padding-alt: 0 to 5.4pt 0 to 5.4pt;
  MSO-para-margin-top: 0;
  MSO-para-margin-right: 0;
  MSO-para-margin-bottom: 10.0pt;
  MSO-para-margin-left: 0;
  line-height: 115%;
  MSO-pagination: widow-orphan;
  font-size: 11.0pt;
  font family: 'Calibri', 'sans-serif ';
  MSO-ascii-font-family: Calibri;
  MSO-ascii-theme-make: minor-latin;
  mso-fareast-font-family: "Times New Roman";
  mso-fareast-theme-make: minor-fareast.
  MSO-hansi-font-family: Calibri;
  MSO-hansi-theme-make: minor-latin ;}
  table. MsoTableGrid
  {mso-style-name: "Table Grid";}
  MSO-knew-rowband-size: 0;
  MSO-knew-colband-size: 0;
  MSO-style-priority: 59;
  MSO-style-unhide: no;
  black border: solid 1.0pt;
  MSO - border - themecolor:text1;
  MSO-border-alt: solid black .5pt;
  MSO - border - themecolor:text1;
  MSO-padding-alt: 0 to 5.4pt 0 to 5.4pt;
  MSO - border - black insideh:.5pt United.
  MSO-border-insideh - themecolor:text1;
  MSO - border - black insidev:.5pt United.
  MSO-border-information - themecolor:text1;
  MSO-para-margin: 0;
  MSO-para-margin-bottom: .0001pt;
  MSO-pagination: widow-orphan;
  font-size: 11.0pt;
  font family: 'Calibri', 'sans-serif ';
  MSO-ascii-font-family: Calibri;
  MSO-ascii-theme-make: minor-latin;
  MSO-hansi-font-family: Calibri;
  MSO-hansi-theme-make: minor-latin ;}

  Image img = Bitmap.FromFile ("myImage.jpg"); in pixels, this is the place where the image will be drawn RectangleF initialRectangle = Rectangle.Empty; in the data, to map coordinates the image XRange range; Range yRange; Private Sub PlotMyData() { plot your data here xData double [] = new double [] {3, 5, 7, 5, 8, 3, 7, 8, 2, 6}; Double] yData = new double [] {9, 1, 2, 6, 8, 3, 3, 6, 2, 2}; scatterGraph1.PlotXY (xData, yData); xRange and yRange define the plot area limits left-top to bottom-right xRange = new range (xAxis1.Range.Minimum, xAxis1.Range.Maximum); yRange = new range (yAxis1.Range.Minimum, yAxis1.Range.Maximum); RecalculateImageBounds(); } Simply map the data coordinates values in pixels posts from the top left and lower right must be mapped. Private Sub RecalculateImageBounds() { PointF size = scatterPlot1.MapDataPoint (scatterGraph1.PlotAreaBounds, (xRange.Maximum, yRange.Minimum); initialRectangle.Location = scatterPlot1.MapDataPoint (scatterGraph1.PlotAreaBounds, xRange.Minimum, yRange.Maximum); initialRectangle.Width = size. X - initialRectangle.Location.X; initialRectangle.Height = size. Y - initialRectangle.Location.Y; } Just draw the image. Private Sub scatterGraph1_BeforeDrawPlot (sender As object, BeforeDrawXYPlotEventArgs (e) { RecalculateImageBounds(); e.Graphics.DrawImage (img, initialRectangle.X, initialRectangle.Y, (initialRectangle.Width, initialRectangle.Height); }

  Make sure that the image is of good quality so that you can zoom in pretty close.

  I hope this helps.