a programe name abnormal conhost and make the cpu overload

Similar Questions

• Satellite A500-025 - optical drive runs very fast and makes the laptop

  Just bought PC toshiba A500-025.

  When I put in some disc in the optical drive, it runs very fast and makes the phone vibrates.

  I was told that there is a toshiba utility that detects an imbalance in the disc and slows down the speed of the drive, but I don't know where to find this software utility.

  Thank you.

  Hello

  I think you mean the acoustic silencer
  As I remember, such tool was available for some laptops with pre-installed Win XP or Vista.
  For example; the acoustic silencer was available for some of the Satellite A200 and you could download this on the European driver Toshiba page.

  To be honest, there s nothing unusual that the CD/DVD drive runs very fast for a few moments, this happens in my portable two different.
  The STRANGE turns very quickly for a few seconds after the CD has been inserted.
  This happens because as the research of windows OS for the content placed on the disc

• How to upgrade the operating system on the new ssd and make the old disk to a data drive system

  Hello

  I have a hp envy m7j010dx with windows 8.1.  It came pre-installed (windows 8) on a 1 TB hard drive.  I recently bought a samsung 840 pro 250 GB ssd that I wouold like to make the drive system and make the original drive my data disc.  confused on how to do it.  hey this is cool not clone. all I can find is stuff of backup or restore.  I just want to put the original on the new disk computer.

  Thanks for any info... soundears

  Start by creating a recovery kit. See the following link for the procedure:

  HP computers - create a recovery Disk Image or save an Image recovery on a USB (Windows 8)

  Learn how to create recovery DVDs or to save a recovery image on a USB flash drive to restore all the original software, in the case of a computer problem major.

  Remove the 1 TB of HARD drive pre-installation and install 250 GB SSD. Use the recovery kit and perform the recovery of the system. See the following link for the procedure:

  HP computers - running a HP System Recovery (Windows 8)

  HP System Recovery allows to reinstall or restore a HP with Windows 8 computer to the way it was at a previous time.

  Then you can connect the 1 TB HARD drive as a data disc and use it.

• How can I move my XP OS to a new drive and make the boot drive

  My PC is a desktop PC DELL which is about 6 - 7 years.  It runs XP Pro SP3, Windows 2010 and contains 4 GB of RAM.  I recently bought a SLC of X 25 - E Intel 32 GB SSD drive and the new drive installed in my PC.  My PC recognizes it as drive "F:".  My "C:" drive is SATA 2 75 GB HDD usng RAID 0. My goal is to move the operating system and other relevant files for the SSD drive and make the startup disk so that I can enjoy the pick-up speed to have an SSD intalled.  I tried looking on the internet but couldn't find information about cloning a whole disk.

  Can anyone provide assistance?  Or is my PC so old that it is more feasible for a novice?

  Norton Ghost version 15 - has a 30 day trial available
  http://www.Symantec.com/Norton/Ghost
  Media: CDR/RW, DVD + R/RW, Blu - Ray, USB and FireWire® devices (IEEE 1394), Iomega Zip® and Jaz® drives
  (Trial does not allow you to create a restore CD)
  http://www.Symantec.com/Norton/downloads/trialsoftware/register.jsp?PVID=ghost15
  User's guide: FTP://FTP.Symantec.com/public/english_us_canada/products/ghost/15/manuals/ngh_15_user_guide.PDF

  Acronis True Image 2011 - has a 30 day trial version available.
  (Install Acronis and then create a bootable media restoration/rescue CD before you begin creating an image backup)
  http://www.Acronis.com/homecomputing/products/TrueImage/
  The version comparison: http://www.acronis.com/homecomputing/products/trueimage/comparison.html
  True Image User Guides and documentation:
  http://www.Acronis.com/homecomputing/download/docs/

  Read guides for the use of these two products, but RAID can be a problem.

  Norton Forum: http://community.norton.com/t5/Other-Norton-Products/bd-p/other

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• When I start most of the programs that is lock and on the taskbar it says program does not. How can I stop this from happening?

  When I start most of the programs that is lock and on the taskbar it says program does not.  How can I stop this from happening?

  Original title: Windows Explorer

  It is a good number with a boot drive (C:\ drive) that is cruelly of free space.

  A healthy walk NEEDS 20% free space at least to work properly and prevent your suspension system.

  Several causes are possible, but check your free space. Upgrade your hard drive if necessary.

  More RAM might help too.

  Check these before you attempt to update or install anything more.

• Put the new upgrade of Windows 10 on my 500 gig SSD and make the main drive (C :)

  Original title: Windows 10

  You want to install (upgrade) new Windows 7 Pro 64) Windows 10.  No problem.

  Here's my question and need help.  I want to put the upgrade of Windows new 10 on my 500 gig SSD and make the main drive (C :)  Just got new PC and the SSD is not yet installed in the new machine.

  Is there a way to do this?  I can install the SSD drive in the pc without problems.  But the pc is set up with the C: drive in the primary.  As I understand it, the update will work, but it will not be for the SSD.

  Suggestions?  Is this possible?

  Windows 7 installation will have to be eliminated if its currently on a separate disk. Which means you have to start over.

  I would first disconnect the hard drive with your Windows 7 installation.

  Install the SSD drive, then install Windows Pro 10 on this subject.

  Download and create a bootable copy of Windows 10 Pro:

  How to download official Windows 10 ISO files

  Demarrer start from the installation media, and then select the SSD during installation:

  How to: perform a clean installation of Windows 10

  Reconnect the hard drive, then format the installation hard disk.

  Option to consider:

  Create an image of the installation of Windows 7 system restore it on SSD, and then upgrade to Windows 10.

  How to pass Windows 7 to a bigger hard drive - books...

  Disconnect the hard drive, connect the SSD drive, then restore image and then upgrade to Windows Pro 10

  How to: upgrade previous versions of Windows using the file ISO for Windows 10

  Check out the YouTube video below:

  How to properly set up the SSD as boot drive and the HARD drive...

• Xps420 - how to install a 2nd HD and make the new drive the boot drive?

  I bought a new and more large hard drive for my system XPS420 almost nine.  I want to install the new disk, create two partitions as the original (C & D (reprise)) drive, copy all of the original drive to the new drive and make the new drive the boot drive, with the original drive becomes a secondary additional storage drive.  I understand how to use the Vista disk management feature to create the partitions and format the new drive. After that, what is the best way to proceed?

  
  

• How to incorporate the timestamp and file name automatically select and save the file dialog?

  Hello

  I try to incorporate the name of the file that is the registration of the end user with the timestamp in the selected and save file dialog box. Can you help me?

  Thank you

  

  Hi Mike227,

  I couldn't find a way to immediately make the bat. I guess you need to mess with ActiveX to do. I found an msdn page that could help with this.

  Have you considered simply concatenating the name of the file and the time stamp with a path of the file and save the file when you create it, without inviting the user?

• The Print Spooler Service has stopped. Restart the print spooler and try to print and make the same mistake.

  Recharging according to the printing software and get always the same error.

  Hello

  You must ask in the answers – Windows Forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ==================================

  Here is a troubleshooting guide for Windows 7 - Vista would be very similar.

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ==================================

  Follow these steps in the kind of prerequisites:

  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ------------------------------------------------------

  References to Vista also apply to Windows 7.

  Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
  to install - make a right-click on the pilot - run as administrator.

  Also check with the manufacturer of your printer and forums support.

  --------------------------------------

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service (see the following link BlackViper for Windows 7 default dependencies)
  http://wiki.blackviper.com/wiki/Print_Spooler

  BlackViper Windows 7 Service - default settings
  http://www.blackviper.com/Windows_7/servicecfg.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• program for own laptop and make it faster

  I have a aspire one notebook, which is very slow. is there a free/no expensive program that I can download to speed up my netbook?

  http://Windows.Microsoft.com/en-AU/Windows7/open-the-performance-Troubleshooter

  Resolution of performance problems

  https://support.Microsoft.com/en-AU/mats/slow_windows_performance

  Automatically troubleshoot and fix problems of Windows performance. Enhance, optimize and speed up Windows computers and make slow PC faster.

• The file of the bar - descriptor.xml (and make the application of command line)

  I made a game with air and it is online for sale on Android and iOS. It is somewhat popular and I thought to put up on Blackberry for quite awhile now and with the Port of soon-to-start-A-Thon, this seems to be a great time to finally make it.

  BlackBerry is not very common that here where I live in Sweden, however it still looks like an interesting with a potential platform if I want to get the trip. Unfortunately I don't own a camera myself so I'll use the Simulator. With some graphic problems with the simulator when running in mode BB10DevAlpha (icons does not appear right) and the Simulator is very slow when running in mode BB10DevAlphaSafe (chart appears on the right, but it seems that updating them requires more CPU my computer are available).

  The game is built using nothing other than Adobe Flash Professional CS6 and a bunch of command line tools to build the package and sign. I've only got an old computer with Windows XP now since the death of my main PC, all at the time and since the Port-A-Thon is just a few days I do with what I got.

  Firstly I understand that only AIR 3.1 is supported by Blackberry 10, so I use the old AIR SDK 3.1 to create a SWF (flash) file.

  What I really need to do should be used in the exported SWF file of the game, then use the command line tools provided by RIM to build the package, right?

  Except that I did not count on bar - descriptor.xml to be so difficult to understand.

  I was brought to the documentation here: https://developer.blackberry.com/air/documentation/bb10/bar-descriptor_config_file.html

  It says Adobe AIR at the top, the platform selected is Blackberry 10 and the title says "bar-descriptor configuration file", so it must be in the right place!

  I start by trying the 'bar-descriptor configuration example file"on this page:

  ===========================================================

  
  
    
        None
        fake
    
   
    
     Name of the author
   
    
     gXXXxXXx ##XxXxXxxxXxXX #xxx
   
    
     Core.Games
   
    
     Icon.PNG
   
    
     HelloWorld - splash.png
   
    
     read_geolocation
     use_camera
   
    
     1
  

  ===========================================================

  Of course during the test I replaced a few things in the example above with the correct filenames for images etc, I just copied the example of right - off this time to you guys show what I mean.

  Firstly, I extract "blackberry-tablets-sdk - 3.0.0" in a folder on the disc, then I make sure as a full path to the "bin" in the SDK folder inside the path on the OS environment variable.

  Then I read on "Applications of Test using the command line": https://developer.blackberry.com/air/documentation/bb10/testing_your_application_cmd_ms_2010851_11.h...

  Now I run:

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf myappnameicon86.png bg splashscreen1024.png - device 192.168.8.128

  Note that "bg" is a folder with 500 images that must be accessible from the app. I hope that I can just add the folder like this and not type a path to each image file...

  What I get (in lib\adt.jar via the bat file):

  error 101: Namespace is missing
  Error: Validation of the AIR is not

  Okay, so the example did not straight on the box.

  Now, I've read all paragraphs in the first URL I linked above ("the bar-descriptor configuration file"). I start my own XML file and make sure to include everything that is marked as "necessary". That's what I'm left with:

  ===========================================================

  
  
      MyCompany
      
          
          com.mydomain.myappname
          My App name
          3.0.0
          
              splashscreen1024.PNG
          
          1.5.0
      
      run_native
      
          application
          
              bb.action.VIEW
              application/octet-stream
          
      
  

  ===========================================================

  I have no idea of what concerns the block whole call target, but it took, so he must be there.

  Now I launch (notice that myappnameicon86.png is gone since no icon is mentioned in the above XML code, it is not mandatory):

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf bg splashscreen1024.png - device 192.168.8.128

  Yet once, I get:

  error 101: Namespace is missing
  Error: Validation of the AIR is not

  Frustrated I get autour on the forums for answers, because the official documentation is nowhere getting me.

  I'm left with this:

  ===========================================================

  
  http://ns.Adobe.com/air/application/3.1">
      com.mydomain.myappname
      1.5.0
      
      My App name
      
      My App name
      
      
          myappname.swf
          standard
          fake
          true
          true
          landscape
          GPU
          fake
      
      
          myappnameicon36.PNG
          myappnameicon48.PNG
          myappnameicon72.PNG
      
      fake
      fake
      
          qnx.fuse.ui.skins.QNXDevice
          qnx.fuse.ui.skins.QNXNetwork
          qnx.fuse.ui.skins.QNXSensors
          qnx.fuse.ui.skins.QNXSkins
      
  

  ===========================================================

  Looks like the XML code that I use when I build for Android.

  First of all it doesn't have the tag root of qnx, but also nothing of the icons are of the required size (86 x 86). The tag required splashscreens and invoke target is also absent, to name a few. No idea of what the entire block of 'extensions' really do.

  Surely, this does not work:

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf QNXDevice.ane QNXNetwork.ane QNXSensors.ane QNXSkins.ane myappnameicon36.png myappnameicon48.png myappnameicon72.png bg-device 192.168.8.128

  Success in building the package BAR to my infinite surprise!

  He even managed to install on the Simulator. An icon for the game. However when it auto-couru the app went into landscape, thought for a second and then crashed (or you leave?) without a message.

  Perhaps because the required qnx tag was missing in the XML?
  Perhaps because images in the bg file could not be loaded?
  Perhaps because he had no permission to keep screen from dimming?

  I have no idea. I tried to add XML to qnx at the address previous to the bar - descriptor.xml, I thought that maybe he needed both the qnx block for when you run the application and the application block for when packaging. But now, he has complained of something like XML is not not clean ("' fatal error: markup in the document following the root element must be well-formed." ").

  So he came to it, I have to ask for help if I ever make the deadline of the Port-A-Thon.

  (1) how am I supposed to write the bar - descriptor.xml?
  (2) what command line starting by "blackberry - airpackager.bat" is OK to use?
  (3) all I have to do is build the SWF using Adobe Flash Professional CS6 and then pack it using the Blackberry SDK, right?

  First of all, there are two xml files that you need.

  One is called the manifesto, is to AIR and is called yourappname- app.xml. It is identical to the ones you use for Android and IOS, though some elements will be ignored. It's one you need to switch on the command line, and is probably causing the 'Namespace' missing error message. A file manifest a minimum is:

  
  http://ns.adobe.com/air/application/3.1">
  
      com.example.appname
      My Fabulous Game
      1.0.0
  
      FileNameOfYourSwfWithoutExtension
      YourCompanyName
      
          [This value will be overwritten by Flash Builder in the output app.xml]
          true
          false
          none
          cpu
          false
      
  
  

  Replace the text in red with your own stuff.

  The second xml file is called to the bar of descriptor. It is for App World and the installation process and is called bar - descriptor.xml. It contains information about signing code, icon, permissions etc. A simple bar - descriptor.xml is:

  
  
     
        none
        true
        landscape
        false
        cpu
     
  
     
     your-name-on-certificate
     your-id-on-certificate
  
     core.games
  
     
     1
  
     
     
        icon86x86.png
     
     splash-landscape.png
  
     
     2.1.0.1314
  
     
     access_shared
     access_internet
     play_audio
     set_audio_volume
  
  

  Make sure that you at least change the red dots.

• Help with Acrobat 7 Pro (make savable PDF files reader and make the columns to do the math)

  Forgive me, I do not normally an interactive PDF file, but I need to know a few things.

  I am using Acrobat Professional 7 at home, but have access to Pro 8.  7, show do you the PDF save information as well as the PDF file in Adobe Reader?  I've seen how Pro 8, which allows 500 visits to the file, which is good enough to use in forms that I do.  But in 7 Pro, I can't find this feature to let the player save filled in the fields in the form.

  The attachment to my message now is the question of the second (but not as important).

  I need to try to make the fields in this form to add, subtract and multiply.  How do I do that?  I don't have experipence of java programming.  This is how I want to have the columns to work:

  Texts, 29, 34, 39 and 44 should match the text 46.  Texts, 30, 35, 40 and 45 should match the text 47.

  Text 48 should subtract text 46 and 49 text should subtract text 47 if used.  The results should then indicate in texts 52 and 53 respectively.

  Now here's the tricky.  Texts, 50 and 51 are optional.  If the main discount is applied, then texts 52 & 53 should have a discount of 5% applied to the totals.

  Is it feasible by a non-programmer?  Any help is greatly appreciated.

  Bill Rudloff

  The rights of the reader extended registration form fields not available in 7 Pro. To use javascript, learn javascript programming. It's not rocket science, but it's the programming.

• HELP Please: compare timestamps with excel and make the corresponding value in the next column

  Hello

  I have attached the program I did up to now and the txt file required by the program.

  I want to compare the timestamp given by me at the beginning of the program, and when it is true, I want to take the corresponding value of nearby and use for the calculation.

  I am able to compare the time but I do not know how to take the corresponding '0' or '1' value of the file.

  I'm a beginner to labview. It can be simple, but I couldn't understand it

  Kindly help.

  Thanks in advance

  Arun

  This?  If you get a match, find a true Boolean 1 d array and use the index of the element to get the data of the next column.

  

• On the Windows start page, photos of key shortcut icon keep Disappearing, failed to peak of the icon of Firefox. How can I stop this and make the pictures remain, as before. This just started last week.

  On my screen shortcut keys don't contain their individual icon pictures, until I have sign, back in market, or Clear My Temporary Files, etc. Then they all go to the Firefox default image. I also noticed that when I navigate using firefox, immediate shows NO icons next to some of the web addresses Web site, Instead showing a drop-message that the website offers no identity Info, which I know is wrong!
  This has only been happening for a week or So.
  Please, please, please help me!
  Thanks in advance for your kindness and help. I am a Novice at this stuff!
  See you soon!
  ;-)

  Hello

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you fix the issue; However, I will need to ask you a few questions.

  1. what version of IE are you using?

  2 do you have of them pack installed?

  3. do you have an antivirus installed on the computer?

  4. do you also deal with any show related to problems with the computer?

  5. are you aware of any changes made to the computer before the show?

  First of all, you can run a full scan using the Microsoft Safety Scanner.

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  You can then try to launch the FIXIT of the article and see if it helps. Also go through the steps in this article as well and check it out.

  If you try the manual steps, do not forget to back up the registry.

  Registry warning

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/

  Hope this has been helpful and let us know if you need more assistance. We will be happy to help you.

• Is there a way to sample a color and make the text of the same color of the sampled color?

  I make a business card for a person and the text must be of a certain color of a logo in the map. Is it possible to sample the color with a pipette tool and they have to make the text of this color? Also, should what size I make the paper to the size of the business card?

  Thank you and Merry Christmas everyone

  Rchjr

  When you start a text layer, you can click on the color box of text at the top that will launch the color picker (text) and from there you can select your desired color.  -See the attachments-

  I hope this helps.