A registry XP file at startup failure error

Similar Questions

• The system at startup failure: error 0xc0000098

  When I start my computer. I get an error message tiltled WINDOWS STARTUP MANAGER. Windows could not start. A recent hardware or software change might be the cause. To solve the problem, it says to insert the file installation disc: \windows\system32\drivers\NIS\1008000.029\SYMEFA. SYS status: 0xc0000098 original title: System failure

  Hello

  SYMEFA. SYS says Norton (Symantec). So, I would like to confirm if Norton (Symantec) is running on the system. The problem may be caused by the incompatible Norton (Symantec) with the hardware or software you installed recently.
   
  In this case, because the system is unable to start up normally, I suggest that we first of all a Safe Mode to uninstall Norton (Symantec) to check the issue.
   
  Uninstall Norton (Symantec) in Mode safe
  ==========================================
  1. reboot the computer and start pressing the F8 on the keyboard key. On a computer that is configured to start to multiple operating systems, please press the F8 key when you see the boot menu.
  2. when the Windows Advanced Options menu appears, select Safe Mode, and then press ENTER.
  3 log on to Windows by using the administrator account or any user account with administrator privileges.
   
  Note: In Safe Mode, the display system and the Bureau will look and perform differently than in Normal Mode. This is only temporary. To return to Normal Mode from the system, we can simply restart the computer.
   
  To uninstall Norton Internet Security, please run Norton Removal Tool.
   
  Note: If the following tool cannot be downloaded via Safe Mode, I suggest we first download it on a different computer and then copy it to the problematic original computer to install it.
   
  4. Please visit the following Web site to download the tool:
   
  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  5. save the tool for Windows Vista desktop.
  6. run the tool according to the instructions on the Web site.
  7 restart the computer to check again the issue.
   
  However, if you still have any concerns to uninstall Norton Internet Security, please visit the following link to turn it off.
   
  http://Service1.Symantec.com/support/NIP.nsf/docid/2003071515220236

  If this post can help solve your problem, please click the 'Mark as answer"or if you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows XP does not start error message "Windows Boot failure. Press 'OK' to repair the startup failure.

  I have a PC running windows XP and it seems to be a virus when the computer starts and arrives at the log on screen. Once I log in, the background appears saying 'safe mode' in each corner of the black screen and an error box appears saying "failed to start Windows. Press 'OK' to repair the startup failure. Then, a diagnosis of FAKE windows disk rises and scan the computer. I really need help and all the fixes involve downloading something and I can not even access my desktop please help im not a computer genius! Also I do not know the specs of my PC because I can't go to windows to get them! :'(

  I think that the difficulty with myantispyware site is to know what type of malicious software that you have?

  I have this same problem on a friends laptop - I started out in a PE environment and run a couple of different recovery CD of AV companies but the problem remains. I also tried to go back to using System Restore, but it did not work either.

  On a work computer download SuperAntiSpyware Portable version from the link below save it on a USB key. Take the USB to the infected computer. Start the computer in safe mode with command prompt. Press Ctrl + SHIFT + ESC. The Task Manager opens. Click file > new task > type explorer.exe > press Ok. Navigate to the flash drive > right click > Explorer. Locate the SuperAntiSpyware file > right click and choose Run as administrator.

  I met recently a few new malwares of thugs that are loaded in safe mode effectively preventing you to download or install anything. For reasons unknown to me from the computer in safe mode with command prompt and then run taskmgr explorer.exe prevents malware to load. This method has worked several times for me this week only. Worth.

  Superantispy-portable    < this="" is="" a="" portable="" scanner="" that="" does="" not="" install.="" it="" can="" be="" run="" directly="" from="" the="" thumb="">

• While the research on how to correct an error in the observer of events, W32 tried merging a .reg file and got an error message saying could not access the registry, why?

  http://www.techexams.NET/blogs/jdmurray/synchronizing-the-time-on-Windows-XP-and-Vista-with-the-Internet/

  Hello, I'm under win xp pro svc pk 3, ie 8, x32bit.

  I received an error in the Event Viewer system for time synchronization W32. Help box said not to worry if it's a computer for the home user, but I'm tired of doing all the time, every day, so I tried to find a way to get rid of it. On bing, I found the above Web site and tried to merge the nist servers in my registry but I kept getting msg. :

  Impossible to import c:\doc and set\adm\dsktop\timeservers.reg: the specified file is not a registry script. You can only import binary registry files in the registry editor.

  the first msg not acceding, and I guess it was because I had the registry open at the same time. Anyway after that I couldn't import, just add the items in the registry manually.

  My question is, really, was performed correctly by the copy of the list of servers of time in the text, paste it into a file and you try to merge?

  Appreciate any assistance with this issue.

  Just for info:

  If you see a message similar to the following:

  Impossible to import c:\Documents and Settings\Jose\Desktop\enableit.reg: the specified file is not a registry script.
  You can only import binary registry files in the registry editor.

  That means either that your registry import file is missing the top line (or it's the wrong syntax):

  Windows Registry Editor Version 5.00

  or the file you are trying to import is not a valid registry import file.

• The Instance of product registration error message: "system failure: Error retrieving database xml file.

  Hi intend installation gurus,
  
  do you have hopefully solve this problem and I am also facing the same problem "Error creating instance" during the installation of Planning 9.3.1. I tried the reconfiguration of 30 to 50 times each time problem...
  
  
  OS: Vista Premium
  SQL Server 2005
  Essbase:9.3.1
  
  
  Error message: "system failure: Error retrieving database xml file.
  
  
  Details of error:
  at com.hyperion.planning.event.HspSysExtChangeHandler.run (unknown Source
  )
  He can't get the JDBC connection for external change SYS actions.
  He can't get JDBC connection.
  java.lang.NullPointerException
  at com.hyperion.planning.sql.HspSQLImpl.getConnection (unknown Source)
  at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller (exercise
  WN Source)
  at com.hyperion.planning.event.HspSysExtChangeHandler.run (unknown Source
  )
  He can't get the JDBC connection for external change SYS actions.
  He can't get JDBC connection.
  java.lang.NullPointerException
  at com.hyperion.planning.sql.HspSQLImpl.getConnection (unknown Source)
  at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller (exercise
  WN Source)
  at com.hyperion.planning.event.HspSysExtChangeHandler.run (unknown Source
  )
  He can't get the JDBC connection for external change SYS actions.
  He can't get JDBC connection.
  
  
  Please give Solution

  Hello

  I don't understand why this is the case, it may be up to Vista, the details in the file properties appear to be correct
  except the encrypted password too short
  SYSTEM_DB_PASSWORD = GGAKFJ
  have you changed it before posting?

  Also you can try to change
  SYSTEM_DB_URL = jdbc:hyperion:sqlserver://neeraj-PC:1433
  to use your ip address just to test, if you change it after you have saved you will need to make sure that you have closed the configuration utility and then restarted, it.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Start of the missing OS file of repair failure

  I ran Startup Repair to see if it would fix the many problems I asked for help in other instances of answers and got nothing.
  My OS is Windows Vista SP 2 w / recovery Partition. I made a set of recovery disks, but one of the disks is unusable and that they are not available at HP.
  Relocation of service paks would help or do I have to start Recovery (I really don't want to do witch) hope it works?

  Here is the result:

  PEN 01 unknown
  PS 02 6.6000.16386.0.0.0.0
  PS 03 0
  PS 04 65537
  PS 05 unknown
  PS 06 No. OS installed
  PS 07 0
  PS 08 1
  PS 09 difficulty Patition Table
  PS 10 1168
  OS V 6.0.6000.2.0.0.256.1
  Local ID 1033

  Root cause found

  No OS files found on disk
  Repair action: Partition Table repair
  Result: Failure, error Code 0 x 490
  Time taken = MS 3947

  One thing I forgot to mention, the last 2 times I tried to run Chkdsk it failed, it just stopped running.

  The second time was after I ran the ISO recovery disk.
  I run Disk Clean up, I run fairly often anyway, as well as the Defrag.
  Since I was the recovery Partition, I'm not sure to play with it.
  I have a portable hard drive for back up. at the end of the day, no matter who walks through your life, it is important that remains. J. R.

• laptop hard drive failure error 301 on my device

  a few descryption

  . device name - hp pavilion g61200 do you

  . the problem in the hard disk it displays SMART drive failure error (301)

  HP PAVILION DO YOU G61200 & O/S WINDOWS 7 ULTIMATE

  I want to know, what is the ERROR DISK HARD SMART 301

  with in a few days I am facing this problem in my device

  so, what can I do for this problem...

  Please tell me

  Hello

  Do a hard reset first.
  http://support.HP.com/us-en/document/c01684768

  The SMART drive test produces a prediction on the risk of hard drive failure, not a real failure.

  A warning to SMART disk error can appear for various reasons such as having been jarred abruptly computer or hard drive, be subject to the higher than usual temperature.

  Perform HP hard drive - wide test of the system BIOS Diagnostics shortly after switching on, tapping F10/F2

  If there are any Smart player or hard failure error you see, Hard Drive is a failure and the solution is to replace the drive.

  It would also be very wise to make sure that you back up all your files etc as soon as possible.

  Thank you

• Keyboard Predator G3-710 at startup failure

  Hello world

  I had my G3-710 4 months and so far love it until today.

  Today I got keyboard at startup failures upward on my predator keyboard and the keyboard does not light.  I tried all usb slots and it makes no difference.  If I kept Windows, he did the light upwards, but now does not only.  I plugged in a spare room and works on all ports.

  Is there a way I can definitely confirm that this is a failure of the keyboard before going through the trouble to send it back to Acer?

  See you soon

  James

  Connect your predator keyboard to another PC and check if it gives you error too (the BIOS must be set to stop on error of keyboard)

• ... has been registered. There was an unexpected failure (error code 771)

  Upward until about a week ago Windows Media Center records very well. Suddenly, none of our TV shows will record. He gives us the same error message:... .to was not recorded. There was an unexpected failure (error code 771). I checked our storage and we have plenty of space for recordings since we generally remove them after watching. The computer will not be because of sleep mode that I was on the computer when the bubble of error is displayed. It will record only if I go into the Media Center and hit record on a show that is presented on the airwaves at the time.  It does not freeze during recording, just won't save.

  Hi Adolpha,

  1. don't you make changes before the show?

  Try the following steps to set Windows Media Center Receiver Service local only and check the result.
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, double-click "Windows Media Center Receiver Service"
  c. change the startup type to automatic, and then click Start.
  d. click the Log on tab, select "Local System account".
  e. click ok to apply the changes and restart the computer.
  f. check if the problem persists.

  See the question "What should I do if Windows Media Center is unable to record a show?" in this article.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Removal of startup parameter error: the specified Service does not exist as an installed Service

  Hello

  I am currently removing two services in Autoruns, for the reason that they are highlighted, and that means that it no longer exists. However, I'm running into some trouble while he was trying to do, I get the following error:

  Removal of startup parameter error: the specified Service does not exist as an installed Service

  For diagnosis, I downloaded my log of Autoruns on OneDrive text file and you can view it by clicking here.

  Thank you

  Party of Lighthouse

  My research yesterday using Google yesterday suggested malware damage.

  Select Start, all programs, accessories, right-click right-click command promptand click run as administrator on the menu drop-down... Type cd\ and press ENTER. Type "chkdsk c:/r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter it when asked if you want to run chkdsk on restart the computer. Type exit, press ENTER, and then restart the computer.

  Please run the SFC system and say if she cannot fix corrupted files: http://support.microsoft.com/kb/929833

• Synchronization of offline files impossible access denied error message

  Tried to assign full user rights to the folder of the CSC. EnableOpLocks entry created in the registry. Devil offline and enabled offline files. Manually delete the files offline and Sync Center. Nothing works, it cannot synchronize. Cannot encrypt or decrypt - access denied.

  Hello

  I suggest you follow the steps described in the links:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/offline-files/57532019-8fb1-44AA-9bd3-b10bbd1ac468

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/offline-files-Sync-Center-persistent-error/c187b4ae-0ccb-4c76-BEED-dda9f340768d

• I get BSOD on windows 8 and the STATE DRIVER FAILURE error. What should I do?

  I get BSOD on windows 8 and the STATE DRIVER FAILURE error. Never, it happens every time I got close the lid of my portable computer or attempt to put it to sleep. If it helps I have an ASUS S56C ultrabook. I have read other forums and noticed that this problem is related to my minidump file. The link is https://skydrive.live.com/redir?resid=B33EC443BFC08CAF! 239 & authkey =! APosKb0gDrCL_7M. Thanks to all those who can help you

  Hello

  Since there is a new check laptop with the seller and ASUStek support for warranty
  repair. As OEM ASUStek is responsible for the good operation of the equipment both
  and Windows. Keep in mind do you more they tell you it's something
  you did it. Added that even if you are somehow able to solve the problem you
  would that he documented in the case of other problems on the road.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  =======================================================

  If you really want to solve the problem (which I do not recommend on a new computer
  under warranty):

  Results verified BlueScreenView WinDBG / DumpCHK.

  The Bug_Check has been iaStorA.sys 9F CAUSE i.e. technology Intel Rapid Storage Technology driver.

  9F error checking, {3, fffffa80121cf7f0, fffff800af4687e0, fffffa8013b01c60}

  Probably caused by: iaStorA.sys
  FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  iaStorA.sys as of the 09/07/2012 which is Intel Rapid Storage Technology driver.

  fffff880 ' 01638000 fffff880' 01902000 iaStorA T (no symbol)
  Loaded symbol image file: iaStorA.sys
  Image path: \SystemRoot\System32\drivers\iaStorA.sys
  Image name: iaStorA.sys
  Timestamp: Wed Jul 09 13:42:33 2012 (4FFB4239)

  Collate ASUStek support, their drivers and documentation online and ask for their
  Forums about known problems.

  BiosVersion = K56CA.206
  BiosReleaseDate = 21/08/2012<- bios="" is="" fairly="" current="" however="" there="" may="" be="" an="">
  most recent version. Also check updates the chipset drivers and other key embedded
  and separate device drivers.
  SystemManufacturer = ASUSTeK COMPUTER INC..
  SystemProductName = K56CA
  Family = K
  SystemVersion = 1.0
  SystemSKU = ASUS-NotebookSKU
  BaseBoardManufacturer = ASUSTeK COMPUTER INC..
  BaseBoardProduct = K56CA
  BaseBoardVersion = 1.0

  ASUStek links above.

  After checking with ASUStek and if necessary to check updates with Intel.

  For the Intel driver update utility<-- run="" this="" after="" checking="" with="">
  http://www.Intel.com/p/en_US/support/detect?redirector_count=1&

  Intel - <- also="" search="" here="" -="">Quick storage drivers Download Center.
  http://Downloadcenter.Intel.com/

  Forums and Intel - Support - community
  http://intelopenport.hosted.Jivesoftware.com/Community/Tech

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Image processing failure: error code: 1004

  When you export to DropBox of Lighroom I get this error: image processing failure: error code: 1004

  Under which it lists all the images that I export.

  99% of the time the images for export to the correct location and look good. But the error always comes to the top. And every now and then photos are not really exporting.

  Windows 10

  Lightroom Version CC 2015.3

  Thank you!

  Try to reset the preferences of the instructions here file

• I try tom open a gz file and get an error message: Broken pipe error 32: can someone tell me how to open the files of theses and recover what is in them, in layman's terms please.

  I used a program called by Kivisoft to recover my music files on my hard drive. He recovered their property, but they were in the form of a ZIP file with a gz file. But whenever I tried to open the ZIP file, I get an error message saying broken pipe 32 error. There, someone knows how to open these files and recover music on their part could you explain in simple terms that I'm not good with the user base of coding software. Thank you

  Here are some steps for you: http://www.wikihow.com/Extract-a-Gz-File

  You can start by trying utility GUI Tar to unzip the .gz file

• Ink system failure error Code 0xc19a0013 HP Officejet 6500 has

  Printer has stopped printing in black ink: get a gray tone or no impression.  Get higher up the ink system failure error.

  Reviewed the help pages and have installed new black ink cartridge, check the squares of all the cartridges, clean the print head menu Tools, removed the print head and cleaned manually, unplug the power supply etc. Considered the responses on the forum pages. A ran HP print and Scan doctor.  I consider when buying a new print head or a new printer, any other suggestions? It's only black ink.  I ran a test page and the black box of the ink is interesting: instead of going from the darkest to the lightest he's going from light to dark to light again.  Thank you, Sue S.-S.

  You're welcome Sue

  See post below on Bob soak the printhead...

  http://h30434.www3.HP.com/T5/other-printing-questions/Photosmart-premium-C309a-black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673

  (1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
  (2) remove all ink cartridges, then remove the print head Assembly.
  (3) gently put the printhead nozzles down in water and soak for 5 minutes.
  (4) remove the print head and gently dry the electrical contacts.
  (5) replace the print head in the printer and then reinstall the ink cartridges.