The system at startup failure: error 0xc0000098

Similar Questions

• The system restore failed. Error message (unspecified error occurred during restore).

  The system restore failed.  Error message (unspecified error occurred during restore).  I am running Windows Vista Home Premium.  I uninstalled Mcafee Security Suite and System Mechanic 9 which are the security only packages I have.  After uninstalling the above, I tried several points with restore the with the same results.  Any ideas?

  Nortonn, McAfee etc often stops system restore:

  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  Run more high tool ot remove all McAfee.

  1. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  2 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• The system has encountered an error during the interview of the application. If the error persists, contact the system administrator

  Hi all

  We cloned an Oracle EBS R12.2.2 instance and it worked very well for us. To increase the RAM of the newly created virtual computer, we did the virtual machine down. Once the RAM has increased, we started all the services (without error), including level of DB and Application layer. But when we try to access the application of EBS get the following error:

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  The system has encountered an error during the interview of the application. If the error persists, contact the system administrator.

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  
  

  Then I checked all the services, they are running.

  
  

  Log file: / u01/applmgr/SCREWS/fs_ne/inst/VIS_ebsr72/logs/appl/conc/log

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Process of shell VIS_0402@VIS Manager internal simultaneous departure - ID 6095

  logfile=/U01/applmgr/vis/fs_ne/inst/VIS_ebsr72/logs/appl/conc/log/VIS_0402.Mgr

  PRINTER = noprint

  mailto = applmgr

  Restart = N

  diag = N

  sleep = 30

  PMON = 4

  quesiz = 1

  Reviver is ENABLED

  CP-SYSTEM ADMIN RESP. internal MISSINGThe competitor Manager encountered an error.

  Check the simultaneous log manager for more information. : APRIL 2, 2014 14:21:59 -

  Shut down the internal concurrent Manager: April 2, 2014 14:21:59

  List of errors encountered:

  .............................................................................

  _ 1 _

  Systematic AFPCSQ can't nec USER_ID value of the profile option. ORACLE

  error 1403 in get_responsibility_data

  Cause: get_responsibility_data

  has failed because of the ORA-01403: no data found.

  The SQL statement being executed at the time of the error was: and

  a exe

  .............................................................................

  APP-FND-01388: cannot read the value for option profile SQL_TRACE in routine and ROUTINE.

  List of errors encountered:

  .............................................................................

  _ 1 _

  Routine AFPCAL has received the code of failure while running or analysis of your

  simultaneous program CPMGR

  Examine your log file of concurrent application for more information.

  Make sure that you pass arguments in the correct format.

  .............................................................................

  The internal concurrent Manager VIS_0402@VIS ended with the State 1 - abandon.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Note: Before you restart the virtual machine it worked great. It has not changed anything except the RAM to the virtual machine. After the start, we get error.

  I need your help. Please suggest me.

  Thank you

  Prabhakar

  Hi all

  Thank you for your support. I solved the problem. Find the info below.

  ===================================================================================================

  Question: Like I said existing VM is cloned VM. Then after we had changed the host name. I checked the database alert log file:

  Before the reboot: name of the node was the previous still node name VM that it functioned very well. (for ex: xyz.domain)

  After the reboot: name of the node is replaced by the new host name. (for ex: abc.domain)

  Once the name of the node is changed he started creating problem in starting the application services.

  One last thing, I want to mention here after hostname change, approval of new contextfile has 700, but it should be 755.

  Solution: I followed these steps.

  (1) stop all services on the LAYERS of the DB and APP

  (2) change the new contextfile permission if not 755 and the .env at the level of the source DB

  (3) cd $ORACLE_HOME/appsutil/bin and run as: perl adgentns.pl appspass = apps contextfile = $CONTEXT_FILE - removeserver

  (4) change the name from old host to the new host name, so find in contextfile.

  (5) start listener, then the database

  (6) listener status, it must must give service to the db instance

  (7) perform autoconfig with new contextfile (DB Tier)

  (8) perform autoconfig (pane APP)

  (9) start all services

  ======================================================================================================

  It works for me, and now the application is running. I hope that it will also work for others.

  Thank you

  Prabhakar

• 1000 HP Notebook PC: Error Message 90 b fan in the system at startup

  Hello!
  My cooling fan does not work, this morning I turned on my PC and error 90 b of the fan came. How can I fix it?

  Dear customer,

  Welcome to the Support Forum HP and we are happy to help you

  Looks like you are having difficulties with regard to your Netbook cooling fan

  We will surely help you with this

  According to the message that you have posted, I suspect that it is purely a matter of material where in your message 'System Fan(90B) - the system has detected that a cooling fan does not work properly' get. It is a mechanical failure and fan cooling of your laptop and must be replaced before the laptop starts with an overheating problem.

  Causes/reasons for this problem:

  1. sometimes, it's just because of the dust, animal pet hair slows down the fan

  Perform the illustrious below troubleshooting steps:

  Step 01. Turn off the laptop

  Step 02. Disconnect the power/AC adapter and also remove the battery too

  Step 03. Press and hold the power button of the laptop for a minute

  Step 04. Now re - insert the battery back in and plug again the power supply/adapter

  Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

  Step 06. Once you get the BIOS, please press F5 to load the default Installer for BIOS

  Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

  Step 08. Now please wait unit loads Windows and then stop the Netbook again

  Step 09. You need to clean all vents and openings that are really good with a can of compressed air

  Note: If you still get the same error, we need to replace the fan

  I highly recommend you immediately Contact HP technical support by phone to get help immediately to get your Netbook fan replaced and serviced by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on Thumbs Up white on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Failure of Windows Vista and the SafeMode of startup failure - crcdisk.sys

  Hello

  I have a Dell Inspiron laptop computer 2 GB RAM. He had a few months now, and everything has been fine.

  Started a few days ago from freezing occasionally so I was forced to restart. CTRL + ALT + DELETE has refused to do anything and so I had to manually remove the battery.

  A frozen about three times and then once rebooted showed the BSOD saying something the system failure.

  So I rebooted once more and now it restarts just without going on the login screen. I tried to run in safe mode, but it gets stuck on crcdisk.sys or goes in an endless process to restart again.

  Is there anyway that I might be able to get back on without doing a full factory reset, as I have all my work stored on the hard drive integrated without backup.

  I can open the system recovery options, but none of these options seem to work. All my points of recovery have been removed.

  Startup Repair doesn't indicate a problem with the system, so I thought maybe it was a virus? The same thing happened to my wife a few days ago computer and that uses the same Wifi network as me.

  Jacob.

  To search for malicious software, you must do in Mode safe mode with networking, but you say that you can not get the Options.

  There is information below data recovery.

  And Startup Repair Info, too.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Satellite Pro U200-10I - how to disable the system at startup control upward?

  : x Hi,.

  I have Toshiba Satellite Pro U200-10I and I want to disable the control system, as it is a long time to start machine. Is there a way to Devil who?

  Nedd your help! : D

  Hello

  Just checking the system do you mean exactly?
  Is this based on Windows or BIOS based?

  If you mean the ScanDisk in Windows startup you can disable it in the registry:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager
  Change the BootExecute entry to: autocheck autochk *.

  After that restart the ScanDisk is disabled and doesn't appear at Windows startup.

• delete the system registry startup programs

  OK, I know I can use msconfig and windows defender to remove/disable startup programs.

  But some programs on a computer have a mind of its own and keep reinitialsing each time I restart my computer.

  I keep having to disable it process using the Task Manager. There are a dozen of programs that constantly to do this.

  the computer is a dual core 2.66gh 32-bit Windows vista. I have no disk Vista so I can't do a full reformat.

  the computer is also running emensly I suspect a slow virus. I'm unraveling this computer for a friend who has installed the wich following programs, I feel are contradictory, so I try for a clean boot and eliminate any software virus etc. these programs include;

  Spybot s & d

  malawarebytes

  SUPERAntiSpyware

  Ad-aware

  and some mcaffee widget freeware

  to name a few.

  I'm trying to install trend micro internet security total to cover the withdrawal of these programs.

  Can I remove programs in startup list via the registry using regedit in the affirmative were to do to find them. I know this might be a dangerouse exorcise, but I must try if possible.

  Help, please.

  The program Autoruns from Microsoft Sysinternals most of the registry locations where things can be started from the list and is easier than the use of regedit.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  And Yes, if you turn off the bad thing that you can completely mess up the system.

  Here is an introduction to the use of Sysinternals tools

  http://www.msteched.com/2010/NorthAmerica/WCL314

• Email connection problems: cannot access the requested url due to the system on that server error

  How can I get my email on when I get the above message

  Cannot access the url reqested due tosystem error on this server

  Apparently, there is a problem on the mail server. Contact technical support for your email provider. MS - MVP - Elephant Boy computers - don't panic!

• Failure of the system recovery: Windows installation error message

  System: HP Pavilion a6554f

  OS: Windows Vista

  I replaced a hard drive failed (replaced 1 TB 750G).  Used my system recovery disks.  Recovery system worked well.  After the recovery is complete, Windows began to install and finally comes up with the message: "installing Windows could not configure Windows to run on this computer hardware."

  Recovery tried again, same result.

  Any suggestions?  Diagnosis recognizes the processor, the memory, and drived hard (all past).

  My apologies.  Another thread has answered with the same problem I had.

  Here is the response copied from this thread...

  I used a builders or OEM copy because the owner could not find their burnt copy and HP is no longer a media available for this model.

  Below you will find an article I googled describing the error and the fix.  Simple.  Once, I changed RAID on AHCI, no problem.

   

  Here is the Solution!

  Here's how:
  　
  Option 1: (as Microsoft says, http://support.microsoft.com/kb/2466753/en-us)
  -Configure your BIOS, change the method to control RAID AHCI or IDE / ATA
  -Get your chipset AHCI drivers from intel and load them when the installation program asks you (onscreen that choose you where to install windows, there is a button labeled as 'Drivers')

  the url is http://www.vistax64.com/general-discussion/295950-help-windows-setup-could-not-configure-hardware.ht...

  Thanks to everyone who offers great help!

  Darryl

• A registry XP file at startup failure error

  Had a power outage a few nights ago. After the return of power, computer with XP Pro would start to start, but after the logo Windows XP, the blue screen appeared with the message:

  STOP: C00000218 {registry file failure}

  The thehive of load registrycannot

  Root\System32\config\SOFTWARE or itslog or its replacement system

  Cannot start with options (safe mode, etc.).

  Cannot restore to any previous restore point.

  BUT... If the blue screen memory dump is allowed to continue, the machine will restart and will start.

  Mystifying to me. Someone has any idea how to get back to normal? The sequence of double-boot is a pain... and of course * something * wrong.

  TIA

  Hello

  If you have a Windows XP CD, you can boot the PC with the CD.

  Once started press 'r' to enter the recovery console. Follow the instructions until you have the command prompt.

  (Here's a nice document with screenshots to help you: http://pcsupport.about.com/od/fixtheproblem/ss/rconsole.htm)

  Type in

  CHKDSK c: /r

  and press ENTER. This will check your hard drive for errors. Once done restart the PC.

  If the PC gives the same error then follow this document to recover the registry from a backup.

  http://support.Microsoft.com/kb/307545

• The System Field Test failure

  This computer runs very slowly since the day it was bought. After serving in a renamed repair store, we assured me there was nothing wrong with her and sold virus protection. A few months later he started to slow again. Then one day, it would be unlocked. After you close it manually with the button / stop and removing the battery, I was able to get into the 'HP Advanced Diagnostic System' to the new service. At that time, I had all the "failures" are attached. It comes to the laptop HP Pavilion PC g7 model. The product number is LF158UA #ABA. Information on what these failures and how to fix them, mean would be greatly appreciated. Thank you.

  Hello

  You are welcome

  Your laptop is listed as a starter with a 500 GB hard drive, then either disks below are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  The procedure to replace the hard drive begins Page 55 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, try to order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Best regards

  DP - K

• How can I fix my msconfig so that the system will work? error: "Windows cannot find 'msconfig'.

  When I go into run and type msconfig, I get the following message.

  "Windows cannot find 'msconfig'. Make sure you typed the name correctly and then try again. to search for a file, click the Start button, and then click search. »

  Only three names came when I ran the search.
  1. msconfig in C:\WINDOWS\Help
  2. MSCONFIG. EXE in C:\WINDOWS\Prefetch
  3 msconfig in C:\WINDOWS\pchealth\helpctr\binaries

  Hello

  Thank you for writing to Microsoft Communities. I understand that you are unable to open msconfig on the computer.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  1. what operating system is installed on your computer?

  2. have there been recent changes to the computer before the show?

   

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Rof the United Nations [System File Checker] SFC scan on the computer that would be a search for system files corrupted on the computer and replace them.

  For Windows 7 and Vista: http://support.Microsoft.com/kb/929833

  For Windows XP: http://support.Microsoft.com/kb/310747

  Method 2:  Also try to scan your computer for the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please follow these recommended steps and post if you still experience the problem.

• Why the system has a runtime error whenever I get a notification from Facebook and try to open it on my windows Live Mail Inbox

  Why my computer has a runtime error and I have to close the computer whenever I get an email from Facebook on my WindowsLive email inbox

  Whenever I try to open it it gives me the message "runtime error" and then I can't do anything except that close and restart.

  I hope you can help

  Hello

  The question you have posted will be well suited in Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support

  http://windowslivehelp.com/product.aspx?ProductID=15

• Failed to create the system repair disc receiving error code 0 x 80070057

  Original title: System repair

  When I try to create a system repair disc it gives me a message "the parameter is incorrect (0 x 80070057) '. In the same area every time I try to make a back-up, I get a message telling me the back-up was done, but without some missing files?

  No help available?

  Ray

  Hello Ray,

  Thank you for your response.

  I appreciate your time and your efforts.

  Please refer to the suggestions of Sharkbyter replied on 18 May 2011 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/unable-to-create-a-system-repair-disc-0x80070057/66b208a9-CD48-447C-98C3-e59f3553c842

  Note: The use of third-party software and links, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software and links can be resolved. The use of links and third-party software is at your own risk.

  I hope this helps.

  Thank you

• Help me I have a bsod "the system has encountered an error of incorrigible material."

  This happened since I bought my equipment on 03/06/2013. I tried to diagnose this problem for 6 months already. It's a pain the *, I thought hmm maybe it's my RAM and RAM he should come home from newegg and I bought myself a pair of kingston hyperX modules and still no luck but I think it's a little more stable: D _

  My profile of computers:
  Intel Core i7 4770 k
  Motherboard Gigabyte G1 Sniper M5 Socket 1150 z87
  Kingston HyperX 8 Gb X 2 1600 Mhz
  Galaxy Geforce GTX 780 / 3Gb
  SeasonicX 850 watt power supply
  Samsung 840 PRO 120 GB SSD
  Western Digital Black 1 TB HARD drive
  BIOS F7 is always up to date.
  OS: Windows 7 Pro 64 bit.
  I use a Noctua NH - D14 CPU cooler and it does not go beyond 50 ° C my graphics card is also not overheating by chance. It is around sometimes 17 c. Yes, 17 c on a cold day, and usually on a normal day idling about 26 - 30 c idle. Time reached especially 60 C on my graphics cards and never really a lot of problems, not that I can think.
  I thought that my Killer Nic E2200 was to blame all this time so I tried the update of drivers for it I thought it was because of that problem and so I updated my drivers couples time and thought to update my drivers in my PC has become less common on the BSOD that it did , but I don't know if it's a coincidence or not. Last month he doesn't have a bsod nearly 1 full month and then it BSOD this Sunday, two times then I watched 12 tabs of YouTube and play battlefield 4. You guys would probably think it is the graphics card, but I really don't think... But you guys can check what the newspaper said about the bsod? She has been driving me crazy since I bought my pieces and I tried a few things.
  What I tried:
  Updated all my drivers as soon as available
  RMA had my memory once before and tested my memory with memtest86 with 1 pass 0 errors but maybe it's not enough...
  Doubt that this is a heat issue I have a great CPU cooler (Noctua NH - D14).
  I'm probably kind of pointing fingers at the graphics card, CPU or mobo... Could be the hard drive or ssd? I don't know, I don't know what are the symptoms if it is a storage device. Would be very happy to discover what is happening so I can return my equipment where it came from and get a new hardware please ^^.
  Moreover, once each while playing games watching youtube or trying to surf online my ASUS black screen MX239H for like 2 seconds. This would indicate that my graphics card is defective/Monitor...-.-se feel like newegg sells the defective goods but gots for me to get the bad stuff. :(
  PLANNING ON WATERCOOLING VERY SOON, so at the end you get this problem is resolved. Yes, watercooling a rig with a game board mATX: (...) Sad, gigabyte did not have an ATX format, when they first released the advice of 1150 Socket Z87 around mid-May?
  Feel free to download the .dmp file and have a look for me. I can't for the life of find me whats going on. I try to be very technical, but I guess I'm not that great with computers, as I thought. I tried to use bluescreenviewer to see whats up. No idea always says the culprits are hal.dll ntoskrnl.exe and I do not know how to decode... Also reformatted my PC several times already. My OS is not the problem.
  Link to the BSOD dump file. https://DL.dropboxusercontent.com/u/84870324/011414-13868-01.zip

  I finally solved my problem. There is not drivers, BIOS, it's CERTAINLY the hardware problem. I constantly tried to resolve the issue, I went intel.com and talked to their support team and they went through the data in 3 days, they said yes, it's the processor. So after a week later I was contemplating on whether to send the processor or not. My k 4770, finally I decided, jeez I'm tired of these bsods so I did and paid for UPS delivery about nearly $20 and shipped since Saturday and arrived on Friday. About a week and a half later, I received my new 4770 k and I'm happy too. nothing ever happened, once again. No black screens, no blue screen of death, nothing. Feels great lol. I now use Artic Cooling MX-4 because the Intel processor, I had until I used IC Diamond 7g thermal paste and I just loved how it messed my wedge of copper processor. It is difficult to wipe them off, so I went with mx-4 and its doing good. It's like 2-4 degrees Celsius higher than IC Diamond 7 G. Sad:-well not many, at least no more problems :) Thank you, Patrick. You did wonders sir. Keep up the excellent work, I'll never have to deal with that bs ever. I'm still trying to test my pc and see if it might happen again. And yet once, remember that I quoted that it can take up to a month to see if it goes blue screens, its random lol. I'll test again more than a month... Maybe a month and a half - 2 months. But anyway, great job, I didn't problems ever since.