Keyboard Predator G3-710 at startup failure

Similar Questions

• Acer Predator G3-710 GTX 1070 overheating

  Hey guys

  So I have an acer Predator G3-710

  • Intel Core i5-6400
  • 8 GB RAM
  • GTX 1070

  But it keeps overheating when im playing games on ultra high heat. And since there were "IceTunnel thermal system" theres no fans in the enclosure.

  A fan will simply solve this problem? The poor obvisoly can't get enough air. So her dosent system thermal iceTunnel seem to work now

  If the case has a place to install a fan, you can buy a fan that uses a molex connector for power.  But it will be always on except if you buy one with an on/off switch.  Temp could lower a bit.

  Try to use the Geforce experience to optimize your game settings.

• Acer Predator G3-710

  Acer Predator G-710 I9820

  Where can I find the documentation on the ports and connectors on the back? (Manual UM_1.0_En.pdf is not detailed enough)

  Starting on the top (back side)

  -Port HMDI, but covered with a plastic?

  -Port DP with removable plastic (ok)

  -several USB ports and audio (ok)

  -Geforce GTX960: 1 white DVI port, marked 1 (DVI-I dual link?), HMDI port and 1 DP

  -geforce GTX960 below: 1 black port marked 2 (DVI - D dual link?)

  Rgds

  Hi ddh43,

  You probably just ask a specific question to be better results from the community.

  The first ports are usually covered because everyone understands that the video card should be used and they will plug the video ports of motherboard and have less experience.

  The GTX960 takes two slots, so you should have 2 DVI, 1DP, 1HDMI in this configuration.

  Cory

• Windows XP does not start error message "Windows Boot failure. Press 'OK' to repair the startup failure.

  I have a PC running windows XP and it seems to be a virus when the computer starts and arrives at the log on screen. Once I log in, the background appears saying 'safe mode' in each corner of the black screen and an error box appears saying "failed to start Windows. Press 'OK' to repair the startup failure. Then, a diagnosis of FAKE windows disk rises and scan the computer. I really need help and all the fixes involve downloading something and I can not even access my desktop please help im not a computer genius! Also I do not know the specs of my PC because I can't go to windows to get them! :'(

  I think that the difficulty with myantispyware site is to know what type of malicious software that you have?

  I have this same problem on a friends laptop - I started out in a PE environment and run a couple of different recovery CD of AV companies but the problem remains. I also tried to go back to using System Restore, but it did not work either.

  On a work computer download SuperAntiSpyware Portable version from the link below save it on a USB key. Take the USB to the infected computer. Start the computer in safe mode with command prompt. Press Ctrl + SHIFT + ESC. The Task Manager opens. Click file > new task > type explorer.exe > press Ok. Navigate to the flash drive > right click > Explorer. Locate the SuperAntiSpyware file > right click and choose Run as administrator.

  I met recently a few new malwares of thugs that are loaded in safe mode effectively preventing you to download or install anything. For reasons unknown to me from the computer in safe mode with command prompt and then run taskmgr explorer.exe prevents malware to load. This method has worked several times for me this week only. Worth.

  Superantispy-portable    < this="" is="" a="" portable="" scanner="" that="" does="" not="" install.="" it="" can="" be="" run="" directly="" from="" the="" thumb="">

• The system at startup failure: error 0xc0000098

  When I start my computer. I get an error message tiltled WINDOWS STARTUP MANAGER. Windows could not start. A recent hardware or software change might be the cause. To solve the problem, it says to insert the file installation disc: \windows\system32\drivers\NIS\1008000.029\SYMEFA. SYS status: 0xc0000098 original title: System failure

  Hello

  SYMEFA. SYS says Norton (Symantec). So, I would like to confirm if Norton (Symantec) is running on the system. The problem may be caused by the incompatible Norton (Symantec) with the hardware or software you installed recently.
   
  In this case, because the system is unable to start up normally, I suggest that we first of all a Safe Mode to uninstall Norton (Symantec) to check the issue.
   
  Uninstall Norton (Symantec) in Mode safe
  ==========================================
  1. reboot the computer and start pressing the F8 on the keyboard key. On a computer that is configured to start to multiple operating systems, please press the F8 key when you see the boot menu.
  2. when the Windows Advanced Options menu appears, select Safe Mode, and then press ENTER.
  3 log on to Windows by using the administrator account or any user account with administrator privileges.
   
  Note: In Safe Mode, the display system and the Bureau will look and perform differently than in Normal Mode. This is only temporary. To return to Normal Mode from the system, we can simply restart the computer.
   
  To uninstall Norton Internet Security, please run Norton Removal Tool.
   
  Note: If the following tool cannot be downloaded via Safe Mode, I suggest we first download it on a different computer and then copy it to the problematic original computer to install it.
   
  4. Please visit the following Web site to download the tool:
   
  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  5. save the tool for Windows Vista desktop.
  6. run the tool according to the instructions on the Web site.
  7 restart the computer to check again the issue.
   
  However, if you still have any concerns to uninstall Norton Internet Security, please visit the following link to turn it off.
   
  http://Service1.Symantec.com/support/NIP.nsf/docid/2003071515220236

  If this post can help solve your problem, please click the 'Mark as answer"or if you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Laptop will not start. A run Memory Test-got of startup failure ID:U0F323 - 66F722-9XNK1G-406 K 03

  Laptop will not start. Ran startup Memory Test-am failure

  Failure ID:U0F323 - 66F722-9XNK1G-406 K 03.

  Product ID: B8M97PA #UUF

  MEMORY MODULE

  Window7 as operating system

  Any help would be much appreciated!

  Hello

  Try the following.

  First of all, regarding the manual of maintenance on the link below--remove and reposition your bars of memory.

  If the above makes no difference, and you have more than one Module of memory installed, try the following - if you have only 1 Module installed, try in the other available slot.

  Again, regards to the manual on the link below, delete one of your modules from memory and then see if the computer will start.  If it doesn't, try the same module, but in another location.  If it is still won't start, try the other memory module in both slots, to see if any combination will allow the laptop to boot up normally.

  The procedure for withdrawal of these modules is detailed on Page 50 of your maintenance & Service Guide.

  Kind regards

  DP - K

• Satellite A105-S4254: several keyboard keys stop working after startup

  Hey

  I have a laptop A105-S4254, which is less than a year.
  When I boot it upward a few minutes most of the keys stopped working.
  The F keys will however continue to work.
  I can laugh with the brightness and activate / disable the num lock and scroll but I can't type.

  A number of key just freeze.
  When I reboot the keys work for a few minutes and then stop working again.

  Please help me with suggestions and solutions.
  Thanx

  Hello

  For me, it looks like a hardware problem. Maybe it s the keyboard or keyboard controller itself.
  But first, you must be sure that this failure was not due to a software problem.
  Therefore, it would be desirable to update the system and install the OS from the Toshiba Recovery CD.

  If the keyboard problem appears again, I'd recommend contacting the ASP in your country to control the laptop.

  It seems that the guarantee could be valid for all replacements must be done for free.

  See you soon

• Y580 startup failures

  I own my Y580 for 2 weeks now and everything is fine. Since yesterday, the startup fails with a blank screen and the light of the lit keyboard. Disable the Y580 with button / stop and try 5 - 10 times to boot, Windows 7 starts up and runs very well. After this restart or switch off voltage works great as many times.

  Several hours waiting for example. all night with the Y580 of if turned off, the problem occurs again.

  I installed Windows 7 regular updates and a new driver for the GPU. I restored WIndows to the point before the update driver GPU - same problem.

  Any comments?

  As WIndows does not attempt to start at all, I wonder if Windows is the cause of the problem or something else?

  Thank you

  Jens

  
  

• Acer Predator G3-710 map mother size!

  Hello forum members. Rebuilt a large part of the area of predator and update of the RAM, SSD-disk, CPU, heatsink and fans and more but no further until I change the motherboard. Anyone who knows the size is on this motherboard G3-710.

  http://fonziebulldog.blogspot.se/2016/09/overklockade-Acer-predator-datorn-Mer.html

  Thank you very much "IronFly.

• Failure of Windows Vista and the SafeMode of startup failure - crcdisk.sys

  Hello

  I have a Dell Inspiron laptop computer 2 GB RAM. He had a few months now, and everything has been fine.

  Started a few days ago from freezing occasionally so I was forced to restart. CTRL + ALT + DELETE has refused to do anything and so I had to manually remove the battery.

  A frozen about three times and then once rebooted showed the BSOD saying something the system failure.

  So I rebooted once more and now it restarts just without going on the login screen. I tried to run in safe mode, but it gets stuck on crcdisk.sys or goes in an endless process to restart again.

  Is there anyway that I might be able to get back on without doing a full factory reset, as I have all my work stored on the hard drive integrated without backup.

  I can open the system recovery options, but none of these options seem to work. All my points of recovery have been removed.

  Startup Repair doesn't indicate a problem with the system, so I thought maybe it was a virus? The same thing happened to my wife a few days ago computer and that uses the same Wifi network as me.

  Jacob.

  To search for malicious software, you must do in Mode safe mode with networking, but you say that you can not get the Options.

  There is information below data recovery.

  And Startup Repair Info, too.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• HP 15 laptop: startup failure, failure of the DST on 15 HP, with 8.1 windows

  Salvation in the transition from my laptop it displays

  automatic repair, then displays diagnostic PC for hours.

  I tried using F2 and found the failure of DST, and in the management of the firmware, BiOS update and roll back did not indicating that the Signature file was not available.

  How can I get my data back and restore my system? Looking for options and help

  Hello

  Thanks for posting in the HP Support forum. Welcome!

  I'm afraid that it is hardware problem - faulty hard disk drive (HDD). For more details, you can provide me with the full error code that was present there.

  However, since this is the defective HARD drive, you probably will not power recovery files (details to follow).

  Your options:

  (1) If your computer is still under warranty, please contact HP support and inform. They will work with you on how to replace the faulty component.  Contact HP:

  > > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  > > http://support.hp.com/us-en/contact-hp

  (2) If your computer is with the warranty period has expired, you will need to replace the failed HARD drive - buy it yourself. There are various options - sellers you can choose one - you need 2.5-inch SATA HARD drive. You can get it online or retail store of PC.

  You can also consider installing the SSD instead of the HARD disk - it is strongly recommended that SSDS are faster, lighter and more folding. More info on SSD:

  > > http://www.computerhope.com/issues/ch001396.htm

  > > http://www.pcmag.com/article2/0, 2817,2404258,00.asp

  How to replace the failed HARD drive with new HARD or new SSD drive: Please, find information and instructions in the manual for your computer or look at examples of videos YouTube for HP 15. If you do not want this in your own, please make the computer (or ship it) to the authorized Service Center HP where technicians will do that for you. If you don't know where such a centre, check the latter or contact HP to help find one closest to you:

  > > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  > > http://support.hp.com/us-en/document/c00372730

  > > http://www8.hp.com/us/en/store-finder/find.do?bs=SR4 & type = authorized

  (3) last part - once you replace the defective component - you have to reinstall your operating system - Windows or another return. Thus,.

  (3.1) IF your computer is originally shipped with Windows preinstalled from HP (aka OEM of Windows), then you must use the HP - DVD or USB pen drive recovery media you have previously created recovery media or purchased from HP. Some general info > > http://support.hp.com/us-en/document/c00006110

  (3.2) IF your computer is not originally came with Windows pre-installed, but you later installed the operating system on your own, you must use the operating system / Windows installation media and install Windows on your own.

  Please, let me know how it goes and post back if you need assistance. Impatience your feeback/response.

• G501 / win 8.1 - default keyboard to U.S. each startup instead of the parameter UK

  I put ENG UK and keyboard ENG in the initial configuration, but each time it starts it is up to the ENGLAND WE. How can I make him stay keyboard and language English UK.

  Thanks, the only way I found was to delete the American keyboard, which has resolved.

• HP Pavilion 500-314: keyboard does not work on startup

  At the start, that the keyboard is not working I have to unplug it and plug it back in

  to make it work. He doesn't do it every time that 1 in 10 starts. The mouse works fine.

  I tried differrent 2 same keyboards. Tried different ports samething.

  HP Pavilion 500-314

  Hello @jwhisenhunt,

  I understand that your desktop computer keyboard work correctly, and that this problem occurs with more than a keyboard. I'd be happy to help you in this case!

  This problem occurs if you start your computer in Safe Mode? Your keyboard is connected to a PS2 or USB port?

  In the meantime, I recommend that you follow the steps described in this document on the wired keyboard (Windows 8) troubleshooting. This should help to correct for non-response of your keyboard.

  Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!

  Concerning

• upgrade of Predator g3 - 710 Zotac gtx 980ti

  I want to update my graphics card to a Zotac Geforce GTX 980 TI amp

  but I don't know if it will fit so could you tell me if he would and it will make me lose the habit of my warranty I

  Hi Ymcgaming,

  While I have no details on the Zotac 980ti, I'd be surprised if it did not. I know that others have installed 980ti without too much difficulty.

  Regarding the cancellation of the warranty, you don't void the warranty on your predator product by opening the panels or the upgrade components. Of course, the warranty only covers original parts, and I would say clinging to them for the purpose of troubleshooting if you still have a problem. In addition, the guarantee would be covers damage caused as a result of doing the upgrade, but the modernization bill itself won't cause you problems.

  Cory

• HP g62 460so startup failure ID

  Hello, I was surfing on facebook, and the laptop froze with a blue screen. I tried to restart a couple of times, but the computer froze at the windows screen. Also tried with all disconnect.

  I then ran a diagnostic startup and got the following default ID: RLL2TR-5KH6LR-XD0141-60UK03

  A value of 0 may be the letter O, but also the number zero.

  My laptop model: HP G62 420SO

  Operating system: Windows 7, 64 bit

  Interesting, because I finally managed to launch the recovery DVDs and reset the system. This means that the hard drive will crash very probably soon again?