A required device is not connected or cannot be accessed error on startup blue screen

Similar Questions

• Pavilion 15-p051us: a required device is not connected or is not accessible - virus

  Product name: Pavilion 15-p051us
  OS: Windows 8 (I mean 64-bit, but I'm really not sure)
  
  To start the HP logo lights up and says prepare auto repair, but it brings me to a blue screen of recovery saying a required device is not connect or are not accessible.
  
  With an error code: 0xc0000185
  
  Says I need to use recovery on my installation media tools. Unfortunately, I don't have and searched online including the HP website to no luck maybe a way to order them.
  
  I also have the 3-year warranty for the laptop but not sure if that includes software problems or damage accidental just like a fall, spillage, etc.

  You can order a media recovery on your Support page. The last item in the list of software/drivers:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model/7242101#Z7_3054ICK0K8UDA0AQC11TA930O2

• Envy DV7 HP: HP DV7 Envy your PC need to be repaired a required device is not connected

  I have 10 Windows on my HP DV7 envy.  When I turn it on I get the error "Your PC need to be repaired a necessary device is not connected."

  None of the keys work, which means I can't select startup options or select System Restore.  It just brings back me to the blue screen with the error message. So I can not try all options, I found on the internet that are made not boot master book or disable secure boot record.

  I ran the tests of memory and fast disk, as someone else suggested that memory may be bad.

  (HP please don't answer back Windows 10 is not supported.)  Microsoft has given to all customers of Windows 8. Besides it is not at all compared to the question, since the system cannot not even load the operating system.)

  I fixed that basically like this:

  1. safe mode in the bios
  2. change the boot order to put USB in the front
  3. Install Ubuntu from USB, so erase Windows

  I got stuck because I had copied the Ubuntu ISO was not a complete file.

  No doubt I could able recover if I asked HP ship me a replacement disc for Windows 8.1

  Also, I learned that you press f8, f9, f10 or f11 when you turn on the computer.  You must wait until the screen goes to sleep again and repower the computer to switch to another option.  Now key people will work until you do this.

• not able to not connect no username and password box indicated only blue screen

  After pressing enter the page Welcome username and password should be displayed, but I got blue screen instead.

  Hello

  In 'some' case will help this article.

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  Do not forget to check with support of system manufacturer (manufacturer of motherboard for custom
  online systems), their resources and the drivers and ask in their forums (if any)
  on known problems. Don't forget to update BIOS, drivers of low level chipset,
  and the other pilots of major on-board and separate devices. Those who alone can
  set all or part of these issues.

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate Windows 7 methods and use them on Windows 8.

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8). If you cannot start Windows 8 try using a repair
  Disc (see methods of doing a below) to access Mode without failure and other troubleshooting
  steps.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also, Windows 7 and Windows 8)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) to in a
  second or so time of the BSOD to provide more information as possible
  cause: see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
  Details of all application crashes occurred in your system. The information of the plant are extracted
  the .wer files created by the Windows Error Reporting (WER) of exploitation component
  system each time that an accident has occurred. AppCrashView also allows you to easily record the
  list of accidents to the text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ===========================================================

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you have need of a system repair disc or other methods:

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  How to create a recovery USB in Windows 8

  http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

  How to start on the "System Recovery Options" in Windows 8
  http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

  Boot to the tip "Startup parameters" in Windows 8
  http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Pavilion X 2: recovery - your PC needs to be repaired a required device is not connected or is not accessible

  After installing Windows 10 PC is on an infinite reboot cycle, I tried the system diagnostics and it meets the test. I also tried to change the BIOS set up but nothing seems to work and it keeps restarting now. After restarting 3 times, it shows that the installation of Windows and it shows that it is 64% before restarting and this cycle keeps repeating.
  
  If there is a solution that I would be grateful if it is to be provided for me.

  Thank you for your help

• "0xc000000f the boot selection failed because a required device is not accessible."

  "0xc000000f the boot selection failed because a required device is not accessible" I'm not able to use the installation disc that my CD/DVD drive has failed. Is there a way to create a bootable via a USB disk and the PC started?

  Windows Vista.

  Hi Anand,

  The error "0xc000000f the boot selection failed because a required device is not accessible" is related to the error in the hard drive that is required to start.

  Steps to create a bootable USB stick with Windows 7

  As the CD/DVD drive does not work, you can create a bootable USB drive using which you can repair this problem.

  Before you create the bootable USB key with Windows 7, you can download Windows 7 from the link

  provided below.

  http://www.microsoftstore.com/store/msusa/en_US/PDP/ProductID.253735200

  Use the Windows 7 USB/DVD tool to create a USB bootable with Windows 7.

  Here is the link that will help you to create a bootable USB.

  WINDOWS 7 USB / DVD DOWNLOAD TOOL

  Steps to fix the problem with the error code

  After you create the bootable USB key with Windows 7 you can insert it in the boot of the computer, and then press F12 to go to the boot window priority and change the priority of Boot on USB.

  a. After you change Boot priority on USB that is usually at the last, the computer will boot using the USB and it will take you to the page where in the GUI (Graphical User Interface), it will display the install now option.

  b. here you must select fix you the computer from the bottom left.

  c. This will take you to the WINRE (Windows Recovery Environment) window that offers different options

  d to fix problems with Windows.

  e. in WINRE, select the option that reads the command prompt and type the following command.

   

  Chkdsk /f /r

   

  Note:

  The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

   

   

  It will be useful.

• BlackBerry Z10 works: "your device is not connected to a network", but the staff is OK

  Good day to all,

  We have a BDS server work with IBM Traveler.

  We have 1 user who, since this morning, cannot receive email.

  After looking around on the traveler and the BDS, servers, we found no manifest error.

  On the phone, we can see that the Internet/personal workspace work perfectly.

  But the BES 'Account' is in the status "not connected" and when you walk inside to examine the configs, we get the red message "your device is not connected to a network. To connect to a network and try again.

  That is, of course, completely false as works of personal data and its other, personal accounts work correctly as well.

  10.1 device.

  We triied what follows (no license):

  -> Stop / start the data on the device.

  -> Stop the data + mobile network > both start

  ->, Restart the phone

  -> Go into airplane mode > back to normal.

  We triied to reproduce the issue with the other 2 phones: both work well. If only 1 phone has the question.

  The BES server shows that, since the beginning of the question, we get this:

  <#03>[30371] (05/23 11:35:39.365): {0xAD4} {John Smith} Packet cancelled locally, Tag = 1520726

  We consider the deletion/re-create the account of a last resort and to explore other alternatives to build our knowledge base... but we are few ideas here!

  Any suggestions?

  Thank you very much!

  Jonathan

  you have the BlackBerry logo next to your connection?

  If not then do a batterypull while the power is on and see if it comes back

  happened twice with me

• Time Capsule - devices do not connect

  I have a Time Capsule router. I had problems with the devices does not connect to the internet. Restart the previous device will connect then another will not. I have ~ 20 devices on my wireless network. I replaced my DSL modem but the problem persists.

  Any time that you change your network hardware, it's always a good idea to perform a complete recycling of your network equipment power. Check out the following Tip of an airport users for more details on how to do it. Please post back your results.

• Envy 15 t-j100 Select Edition: the device is not connected to the computer. Please insert the authentication device.

  Hello

  So I'm working on a LT desire that has been upgraded from Windows 8.1 to 10 recently and it is this message on the login screen "the device is not connected to the computer. Insert the authentication device. We can't identify what it means or what needs to be done to clear the screen. The user States that the fingerprints of impression of BIO sensor doesn't seem to work either. I looked in the Device Manager, and I see a Synaptics PS sensors (WBF) listed here and is properly installed. I even updated the driver of sensor ep on the support site of the desire, and we still see on the login screen.

  Y at - it no information or help to clear this message?

  We also note that the number on the keypad lock seems to be disabled during startup of windows 10 upwards. Before on windows 8.1 has been activated. Is there any setting to 10 to keep the active number lock.

  The user says if 10 can be made to work well, then we can go back to 7 or 8.

  Please notify.

  Thank you for your time.

  Seems to have been resolved in re - install the software HP Simple pass then go and reconfigure the settings. Message no longer appears on 10. User LT installed with 7 however. Best decision.

• 9.3 OS does not complete on my iPad 2 get message that device is not connected to the Internet, when it exists, a solution?

  WWhen updated my iPad 2 with OS 9.3, when I finally install, during the verification step, message, is that the device is not connected to the Internet when connected. Anyone else have the problem? All solutions?

  Sesame problem on my iPad mini I want to finish the update already

• Error: Your device is not connected to the Internet.

  Hello

  I have a dash HID - B70 model and until last week it works fine. I used about 2 weeks ago and have had on energy saving mode after that. I tried to use it again a couple of days, and when I typed on the screen the unit remained in power save screen and showed a yellow above the clock error message: "your device is not connected to the Internet. Press to reconnect. "I hit this button and the unit tried to reconnect, but will still end up back in the same error message and the screen.
  I tried to push the reset button on the device, but I still see the same black screen and the clock with the error message once it restarts. I unplugged my wireless router and managed to get the device to show me the other wireless networks, then I plugged the router back in and reconnected (device showed that the connection was successful), but then he went immediately to the error screen.
  I can't the unit to go to the home menu at all, no matter what button I push, if unfortunately I can't even reset to factory settings to avoid the problem.

  Any advice on how to fix this? I do know not why it happened because I didn't have the routers or wireless providers, nor have I added all devices on my home network.

  Thanks in advance for your help.

  
  

• the boot selection failed because a required device is not accessible

  Hello

  I give my 15 years old nephew an old laptop so I am trying to run a system recovery and restore it to its original state factory.

  As soon as I clicked on Recovery Manager > System Recovery > restore to their original factory condition, I get a screen with this message Windows Boot Manager:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer. (don't have)

  2. choose your language settings, and then click "next".

  3. click on "Repair your computer."

  If you do not have this disc contact the Adminitrator's manufacturer or a computer in your system.

  Status: Oxc0000225

  Info: The boot selection failed because a required device is not accessible.

  Is there a way to get around this. I would get to it as soon as possible, but I want to wipe all my info beforehand.

  Thank you!

  Karen

  try to perform the recovery by using the partition.  boot f11 and recovery manager must take over. If not, or if the process does not finish successfully, perform a large hard drive. If the test successfully you will need to order a copy of your HP recovery disk.

  as an alternative, you can create a new admin account and simply delete your existing account after.

  hope this helps

• HP 2000-329WM laptop: could not start error Info: the boot selection failed because a required device is not accessible.

  Hello. First when I started my computer this is a white screen. After doing a hard a reboot screen pop up saying:

  Windows could not start. A recent hardware or software change might be the cause.

  He told me to insert your windows installation disc (which I did not).

  He also says

  Status: 0xc000000f

  Info: The boot selection failed because a required device is not accessible.

  Whenever I try to boot normally, it wouldn't let me.

  Hello

  You can use a repair disc. To obtain a repair disc, find someone with the 32-bit Windows 7 computer and create a system repair disk to repair your problem.

  This link will help you...

  http://maximumpcguides.com/Windows-7/create-a-Windows-7-system-repair-disc/

  Checkurtech

• Startup Repair fails, the boot selection failed because a required device is not accessible.

  Hello all,.

  I have windows 7 Home premium 64-bit on dell PCs.  I lost power then in the middle of the update to windows 10.  Now, I'm stuck on the windows Boot Manager screen and the windows error recovery screen.  When asked ¨launch startup repair, ¨I get then message ¨the boot selection failed because a required device is not accessible. ¨ When asked ¨start windows normally, ¨I get same selection boot error message.  I have my disc to install windows 7 HP, but I can't get the pc able to read the disc.  I tried the key windows and ¨r¨to get a prompt to read the disk, but it does not work.  I tried the hard stop pressing the start for 10 sec button, but it does not restart the computer.  I unplugged the computer in hopes that it would help restart, but this doesn´t work.  I am stuck in windows boot manager purgatory - Help!

  Hello

  I would like to know some information about the problem so that we can help you better.

  What is the model number of your Dell computer?

  Thank you for details on the question and your efforts to resolve.

  I also know that the inconvenience that you are experiencing due to problem starting Windows. I will definitely help you.

  This problem may occur because of damaged or missing Windows startup files. This can also occur due to damaged MBR (Master Boot Record).

  I suggest you use the bootrec.exe tool and check if that helps.
  Refer to this article:
  Use Bootrec.exe in the WINRE to resolve startup problems
  https://support.Microsoft.com/en-us/KB/927392

  You can create the Windows 7 installation media using this link.
  Reference:
  https://www.Microsoft.com/en-us/software-download/Windows7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected.

  Hi im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected. What should I do? Thank you

  Hello

   
  1. have you checked the problem by plugging the headset to another computer?
  2. it worked before?
  3. What are you talking about ""device"is not connected?
   
   
   
  I suggest you to connect to another computer and check.
  Also check if the device is compatible with Windows 7.
  Reference:
  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/
  If it's compatible, perform the methods below
  If it is not compatible, see the following articles:
   
   
   
   
  What is program compatibility?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
  
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
   
   
  Method 1: Run the audio Troubleshooter and see if it helps.
  Open the audio playback troubleshooting utility
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter
   
   
   
  Method 2:
  Run the Fixit described in the article and perform the steps:
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  See also:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
   
   
   
   
  I hope this helps.