a security program will not allow me in my computer
I installed a new security program on my laptop, now when I turn on my laptop I have enter my user account and the screen goes black, the TI comes on to the home page
If this does not work, I advise you to contact Zone Alarm support.
I'm sure they have a way around their program.
B Eddie
Tags: Windows
Similar Questions
-
My security settings will not allow downloads in XP?
I can't download the wind. Defender or anything else every time I try to it is some updates or other things that I get this box in front of one that says RUN saying that my security settings will not allow the download? but I dug and searched and parameters of chaunged that I can't find anywhere to change a set. for loads below except that I want to be the one who he oks 1 /? Please help because I need help virus etc. Thank you Patti
Hi Patti,
Try to reconfigure your virus scanner - as appropriate. You can also try to reset and restore the settings of internet explore. To do this, close all open them IE Pages - click on Start-> settings-> Control Panel-> Internet Options-> Advanced-> click on Reset and restore - Tickmark to remove personal settings when prompted.
I hope this helps.
-
I try to download it and the message says: your current system does not. How it go down?
How to reset Internet Explorer settings
http://support.Microsoft.com/kb/923737
I hope that reset Internet Explore setting solve this problem
Otherwise, transfer your question in forum Internet explore
http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads if this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Could you please try to download & install by direct download links:
Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools
2015 all updates of Adobe CC: Direct for Windows download links | ProDesignTools
Please follow them: very important
Concerning
Stéphane
-
I tried to download itunes and I get a message that the security administrator will not allow this download... How to fix this?
Hello
1. this problem only occurs with the installation of iTunes?
2 did you change on your computer before this problem?
3. What is the exact error message?
You can follow the suggestions and then check.
Method 1
Disable user account control and check.
Enable or disable the User Account Control
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off
Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions.
Method 2
Disabling temporary antivirus and check.
Disable the antivirus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
See also:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
http://support.Apple.com/kb/TS1717
Problem installing iTunes or QuickTime for Windows
-
Recently downloaded a program called 'dog driver. It was a mistake. But when I went into Control Panel to use the feature to "Uninstall" to remove the program... the program will not allow the uninstall feature to remove it. Any suggestions? Thank you
If the Control Panel does not remove the software, you can use an uninstall program:
Revo Uninstaller - if she is not fully removed - follow the link and download the free version:
http://www.revouninstaller.com/revo_uninstaller_free_download.html
-
Been trying to download the Microsoft Safety Scanner and AVG free antivirus program but continue to get the following message: "your security settings do not allow this program to download." I deleted an obsolete Mcafee antivirus program and checked my security settings, and all that are in their default settings. Any suggestions?
Hello
I suggest that you run the McAfee removal tool to make sure that McAfee is completely uninstalled from the computer:
http://service.McAfee.com/FAQDocument.aspx?ID=TS100507You can check the link for details on the Microsoft and Microsoft Security essential safety Scanner and also you can download from the link.
Microsoft security scanner:
http://www.Microsoft.com/security/scanner/en-GB/default.aspx
Security Essentials from Microsoft:
http://www.Microsoft.com/security/PC-security/MSE.aspxI also suggest that you send the query linked to Microsoft Security Essentials in the forum link provided and check.
http://answers.Microsoft.com/en-us/protect -
"For reasons of security, this program will not work while system debuggers are active. Please remove or disable the system debugger before attempting to run this program again. »
This message appears whenever I try to open Video Edit Magic, I already turned off Norton.Try to adjust the compatibility setting and run...http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
-
All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.
All the ' * .exe ' programs will not start by simply clicking on the shortcut icon. I need a right click and select "Run as Administrator" to get the program to run. By clicking on the left, a box opens, which says "Windows cannot open this file: file iexplore.exe (example)". "" It then goes on to ask if I want to use the web or select a program from a list of installed programs. Is there a way to get this back to "normal"?
Hello
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be harder to detect as
the cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGERun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp?prevx=Y <-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
======================================
If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
MALWARE IS STILL PRESENT).You can try a repair install or an upgrade in Place.
You can use another DVD that aren't copy protected but you you need to own
Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
good backup or 3 (security in redundancy).On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmThis tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-consoleHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html=======================================
For extreme cases:
Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
uses aggressive methods to detect these threats, there is a risk that it can select some
legitimate programs for removal. You should use this tool very carefully and only after
you have exhausted other options.
http://us.Norton.com/support/DIY/index.jsp================================
If you are in North America, you can call 866-727-2338 for virus and spyware help
infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
international information, see your subsidiary local Support site.Microsoft support - Virus and Security Solution Center
http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
Whenever I try to download it says that there is a virus attached and will not allow the download to continue. It only gives me options other than come on the Microsoft site. Help! How can I fix this problem without having to lose all the information stored on my computer?
Original title: download questions
Whenever I try to download it says that there is a virus attached and will not allow the download to continue. It only gives me options other than come on the Microsoft site. Help! How can I fix this problem without having to lose all the information stored on my computer?
Hello
It would seem that you are infected with malware.
Read the answer in the link by The ball
Your PC is probably infected with the new variant of Sirefef AKA Zero access. The authors scheduled to turn several times a day to help him avoid detection by anti-malware programs.Suggest you use HitmanPro Kickstart, which should remove this malware and fix changes made to the computer by the malware: http://www.surfright.nl/en/kickstart , you must use an uninfected computer to download it to a flash drive and then follow the specific directions on how to run the program on the infected computer. Hitman Pro Kickstart is available as a 30 day trial version.Good luck...
-
For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.
Hello
1. this problem occurs only with this particular update?
2 did you change on your computer before this problem?
You can follow the suggestions and check out them.
Method 1
You can reset the Windows Update components.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
How to back up and restore the registry in Windows XP
http://support.Microsoft.com/kb/322756
Method 2
You can read the article.
You cannot install some programs or updates
http://support.Microsoft.com/kb/822798
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
How to back up and restore the registry in Windows XP
http://support.Microsoft.com/kb/322756
Method 3
Step 1:
Place the computer in a clean boot state.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
a. click Startand then click run.
b. type msconfigand click OK.
The System Configuration utility dialog box appears.c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.
When you are prompted, click restart to restart the computer.
Step 2:Download and install the update from the link.
Update security for Windows XP (KB2719985)
http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282
See also:
Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services
-
ADM 32 GB will not allow a unique SSID and password to be put in place
Sir / Madam,.
I got a new 32 GB ADM. I have updated to Firmware 3.04. I was able to reset the Admin password without problem. However, the unit will not allow an SSID / unique password to create its own network. I typed the info in the settings/edit page the Wi - Fi connection settings, with selected WPA security. It will allow me to type the information in the data fields, and select done. But then brings the following error message.
"Error: failure Action was not successful." Please try again later. »
I also tried only to set a password, with WPA, using the name SSID default ('6B 23 SanDisk media"). It works no more. I tried this in a few days. The unit is fully charged. He has no problem to connect with my home Wi - Fi network.
In addition, on the page of my iPad device settings/Wi-Fi, 6 B 23 of SanDisk media is visible and connects without a problem. But it says "Safety recommendation" under this network name. I guess that's because there is no password set.
I need for this unit to be sure until I'm able to use in public. Any suggestions?
Thank you
Lee
drlucky... OK, I called SanDisk and they understood the problem with me on the phone. Wireless Media Drive passwords do NOT accept special characters or spaces. Numbers and upper & lower case only. Even for the SSID, except spaces are Ok for the SSID. Hope this helps someone else who can read it.
-
How can I recover the files and programs before a system restore? my document folders are all empty and my programs will not open!
I know they are there and hidden somewhere, but this restoration took my settings of the computer to 2004! We lost all our data, our software that we use to operate our company at home, our quickbooks that has all our financial data, family photos, videos, Outlook will work not so no e-mail, all turned in time and 6 years ' worth of documents have disappeared.
What happeneded was that I was trying to upgrade to quickbooks software when I got an error, I cancelled out of the facility, then restarted and that's when I got an error hal.dll something? I thought about a system restore would allow me to go back in time to just before when the error occurred, but he basically took my computer back to factory settings, so all the programs that I installed and paid hundreds of dollars for the past six years has disappeared, Microsoft Office and very expensive construction estimating software that we wil have to pay once AGAIN for If I can't get this program working properly.
I am a fool! I can't believe what's happening.
Someone at - it instructions on how I can retrieve either the programs and data that I need specifically or how to go and seek shade from the files I read online on and restore my computer for about 12 hours ago?
Thank you all!
Sally in Georgia
Looks like you did a system rather than a system restore recovery. If you have inserted a disc supplied with your machine and booted from it, you probably erased the disc and installed the original operating system provided with your computer. Usually, a step in this recovery is to do a full format or quick of your drive. If you did a full format, your data is permanently lost. With a quick format, your data may still be there, somewhere but inaccessible by normal means. Applications must generally be installed, in order to recover the files probably will not help unless you have the original installation media. Your other data files (images, videos, financial data) may be salvageable, but at this point, it would be advisable to take your computer or your disk to a business/professional who is experienced with data disc recovery. It will be cheap and there is no guarantee.
Impatient, remember investigate you a backup strategy for your computer and critical data. Hard drives can go wrong with little or no warning.
HTH,
JW -
Message: "your current security settings do not allow this file to download"
When I want to download a program or update a program, it's what comes on my computer, "your currnt security settings do not allow this file to download." I use Windows Vista. Help me to fix it.
Moved from the community involvement Center
Original title: Current security settings
Hello
Go here for more information about resetting your security settings and to check for infection Poweliks, a frequent cause of this security issue.
http://KB.eset.com/esetkb/index?page=content&ID=SOLN3587
Don
-
Original title: recovery Partition
Stays of complete recovery partition may not free up any space. I get an error message that my memory is low, but when I go to delete files from my recovery disc it will not allow me too. There are 6 total folders on my drive:
Dell, Program files users tools and windows sources.
The Windows folder and the program are the most important concerts of 6-7 piece. But when I try to delete them or move only to the recycling it is bin-error right and says Destination folder access denied and I need permission for this action... Any idea would be deeply appreciated. Thank you
I apolgize if I look tense. That's the way I read your phrase... > if I try yo run an app download anything I get this error...
I suggest that you contact the manufacturer of your computer. Ask to speak to a technician and explain to that person of the situation.
I'm afraid that I have no idea why your recovery partition gives you message "not enough memory" If you have never touched him.
Maybe you'd wait for people with better computer skills to help you.
Thank you.
Maybe you are looking for
-
As I moved the cursor (arrow) from left to right and up and down the font size has become smaller and I could not restore it to its proper size
-
Entries for Queriac will instead Verizon "Search Assist".
The way in which my comments: config is set up, all the entries in the URL bar that is not formatted as a URL are sent instead of "http://queri.ac/lenoxus/X", where X is the input. The result is that I can deal with the awesomebar as a command line o
-
HP desktop to screen white boots
Hello Whenever I try to start my PC it displays a black screen after the dell logo appears. I tried to disconnect all external devices, but also tried to start in safe mode which shows just a white screen with a dash of white flashes in the upper rig
-
"Other identifying information" button on the lock screen does not allow me to switch user
Hi all! It's a laptop running Windows 7 x 64 Pro, Member of the network of Microsoft's domain (Srv2008). Once a user logged - this is no "Switch user" button after closing session or when screen is just locked. Instead of him, I see the said button:
-
Plans of work in PS CC can be also for print design? If not, is it possible to use photoshop with similar functionality?