A service specific error: 2

Similar Questions

• The VMware Workstation Server service stopped with service specific error %-1.

  Hi, when I try to enable sharing in Workstation 8 GTR | Change | Preferences | Sharing virtual machines, I get an error Impossible to configure the workstation server. Check the event log, I found they were trying to start the VMware Workstation Server service that does not start (even when you try to start it manually) and the following error is recorded "the VMware Workstation Server service stopped with service specific error %-1." by the Service Control Manager. I found no additional cases related.

  Running on Windows 7 SP1 x 64. The port is set to 7443.

  I also tried to find a newspaper there instead of vmware, but neither found anything related; However I could have missed something.

  Thanks for all the ideas, what could be wrong and how to fix it.

  Hello

  I have Workstation 8.0.1 installed on two laptop computers each running Windows 7 SP1 x 64... the shared component of the virtual machine runs on one but not the other. On the machine that I have problems with I uninstalled Workstation and reinstalled - without success. What I ended up doing to replace the datastores.xml file in the Directory go (C:\Documents and Settings\All Users\Application Data\VMware\hostd) on the laptop with the problem with the file datastores.xml of the laptop that works - success! I knew that there was a problem with the file because I've been poking around and noticed that the datastores.xml file is not open for editing - it was corrupted.

  I have attached the file to this message.

  Change of the section at the location that you store your shared VM (be sure to not use a UNC, which breaks the service as well!).

  I hope this helps.

  Steve

• Network location awareness service terminated with service specific error %-1073741288.

  I get access is denied errors on Server 2008 r2 error 5 when trying to start services when you try to start the network location awareness service is back with 1073741288

  We receive this error on an application server that connect customers

  Clients know response times very slow, this could be the course?

  Please note that when different users log on to the client computer even know some enforcement LAGS

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Event ID: 7024 with error message: "the Windows Firewall service stopped with the error service specific data are invalid.

  Original title: cannot start Service Windows Firewall: Error Code 13

  Hello.

  Anyway, the Action Center has begun randomly telling me that the Windows Firewall is disabled. When I try to start or return to the default settings, it tells me that it is not able to do.

  I went to Services and Windows Firewall is set to automatic, but it is not started. I try to start it and it tells me that it is not able to do the same. The error code is 13.

  I am an administrator.

  MalwareBytes did find and delete a virus named "Disable.SecurityCenter", but after removing that I am still unable to start the Service.

  Can someone help with this problem?

  Edit: The journal ID is 7024 and description:

  "The Windows Firewall service stopped with the error service specific data are not valid... '. ».

  Hello, Connor

  You can try to perform a system restore to before that the problem started. For instructions on how to proceed, see the following ink: System Restore: frequently asked questions

  You can also try running a SFC scan to check (and repair) system corrupt/modified files. To do this, go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. In the command prompt, type the following command and press ENTER: SFC/scannow

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows could not start the print on local computer service. Error 1068: The dependency service or group could start.

  I can't add a printer.  I constantly receive the associated printer spooler error messages and specifically "Windows failed to start printing on local computer service. Error 1068: the dependency service or group could start. "I tried to restart, tried"FixIt"MicroSoft application... all to nothing does not.  Help?

  Thank you!

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your printer issue in Vista Hardware and drivers Forum above.

  See you soon

  Mick Murphy - Microsoft partner

• Update Windows problem with the Bits Service and error 0 x 80070057

  The service status: problem with the Bits Service

  Error 0 x 80070057

  Original title: Windows Update problems

  Hi Dexter,

  Can I know the KB # the update fails?

  What is the question pertaining to a specific or all update updates?

  What antivirus software you use on your computer?

  To resolve this problem, see the following article:

  Difficulty errors Windows Update corruption as 0 x 80070002 and 0 x 80070057

  Hope the helps of information. Get back to us with more information to help.

• Web service deployment error

  Hi all!

  I created a Web Service to a VI. This VI has two values of entries: a string and and Int8 and a single output: an array of values (1 x table 3) DBL. The inputs and outputs are well connected via the connector pane.

  For example, in the project > unchanged to build, I created WS, built with the advanced > use LabVIEW 8.x file layout option checked, in the dialog box settings WebService (RESTful). The problem appears when I try to deploy this WS. The following error is displayed:

  Error LabVIEW:  (Hex 0xFFFEF84D) LabVIEW Web Services: An error occurred when extracting the deployed Web service. Rebuild the Web service by selecting the "Use LabVIEW 8.x file layout" option in the Advanced tab of the web Service properties dialog.
  

  How can I solve this problem?

  Thank you!

  
  

• The specified service does not exist as an installed service. (Error code: 0 x 80070424)

  I tried to turn on my Windows Firewall because they all stopped working for some reason any

  & When I tried turning on setting recommended my tittes name appears. PLEAS HELP

  The specified service does not exist as an installed service. (Error Code: 0 x 80070424)

  I tried to turn on my Windows Firewall because they all stopped working for some reason any

  & When I tried turning on setting recommended my tittes name appears. PLEAS HELP

  The specified service does not exist as an installed service. (Error Code: 0 x 80070424)

  The name of your what appears?

  Error 0 x 80070424   See: http://support.microsoft.com/kb/968002

• I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

  frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

  Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

  On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

  ``````~~~~`````

  In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot troubleshooting http://support.microsoft.com/kb/331796

• When you try to schedule a task in XP, make a mistake "the new task could not be created the specific error is 0x80070005: access is denied."

  My

  System Type X 86-based PC
  Processor x 86 Family 6 Model 23 Stepping 10 GenuineIntel ~ 3324 Mhz
  A05 BIOS Version/Date Dell Inc., 07-31-2009
  SMBIOS 2.5 version

  I'm trying to schedule a new task I get this error

  The new task could not be created specific error is 0x80070005: access is denied

  I am an administrator for this computer and I am connected to the office network.

  I downloaded a patch KB904423, but it tells me that the installer has detected that the SP of the system version is newer the updte I am applying, I did not need to install this update

  Is there any fix for this?

  Thank you

  Hi dgxp64,

  ·         The computer is on a domain network?

  Method 1: Temporarily disable the antivirus on the computer program and check if it helps. If it works, you may need to check the settings of the program.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Method 2: Check to see if this article helps you.

  How to solve the scheduled tasks in Windows XP and Windows Server 2003

  Method 3: We will grant permission for the C:\Users folder and check if it helps.

  How to set, view, change, or remove special permissions for files and folders in Windows XP

  If the computer is on a domain network you can post your query on the TechNet Forums.

  Windows XP IT Pro category

• Specific error of connector for blackBerry Smartphones

  Just upgraded to Curve 9360. Now, when I synch I get an error when it tries to sync the calendar: connector specific error. No other information. It is the synchronization log:

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  22/04/2012 09:23
  Synchronize the device calendar with Microsoft Outlook calendar

  First system: device
  Second system: Microsoft Outlook
  Second file system name: calendar
  Conflict resolution: notify
  Beach of appointment: 04 22, 2012 at 12/31/3099
  Device data source: «BlackBerry calendar»

  --> Records duplicate found!

  Total of the entries of the first system: 0

  Used for the translation field mapping:
  Device Microsoft Outlook
  Description title - subject
  Notes - body
  -Place
  Alarm Date - Date alarm
  Time alarm - the alarm time
  Start date - Date of start
  Start - Start time
  End date - End Date
  End time - end time
  Alarm indicator - Set Reminder indicator
  Free availability - time to see the like
  Participants - the meeting
  Private - private

  Internal error.
  Cancelled translation!

  There is nothing in Event Viewer to suggest what is the problem. I tried to uninstall all Blackberry software by downloading and installing the latest version of the software as an administrator. Can anyone suggest anything else I can try?

  He solved. Go to desktop, device, delete data. Delete everything to do with the calendar. Check your synchronization copy of the Outlook on the device. It synch. All sorted.

  I hope that anyone else who saves the two hours it took me to find!

• Sims3-message-cannot start the game 0x039e8474 service initialization error

  someone recently put the sims 3 on my computer it's a game hacked, it worked fine on his computer, but it is not functional on mine me repeat it, cannot start the game 0x039e8474 service initialization error

  [Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs]

  Hello

  Probably that's due to the custom being contained in the game which is not compatible with your current version. It can also occur when your cache has not been cleared of a previous installation or game save and damaged.

  I suggest you follow the steps mentioned in this article about this.

  http://Forum.thesims3.com/JForum/posts/list/561267.page

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  If the problem persists, you can post the question in the Sims3 community forums.

  http://www.thesims3.com/community
   
   
  Hope this information helps. Response with status so that we can help you.

• BlackBerry smartphones receiving "connector specific error" when you try to synchronize 8310 w / Desktop Manager

  I've had my phone for over a year and never had any problems until this morning in Sync Center (when he was trying to read the contents of my calendar of the device), he shut it down and said "Connector specific error" and the synchronization ends. I tried to update my software to the latest version, because I was using 4.5, but even after I removed the 4.5 and installed to 4.7, I got the same error.

  Help!

  Joe

  EDIT: Remove personal information

  According to this article, one of the databases (calendar, address book, tasks, Notepad) is synchronized got corrupted.

  http://www.BlackBerry.com/BTSC/KB15294

  That is it stops on the synchronization?

  You'll probably end up deleting the database. First, use the backup and restore utility to perform a full backup of your data. Then, go to the backup and restore | Advanced. Select the database is damaged on the right side and press the Clear button. In doing so, you clear all the entries in this database.

  Try to make a synchronization later and see if it goes through okay.

• BlackBerry Smartphones connector specific error when sync with Outlook calendar

  Installed Outlook2007.  Address, tasks, and notes will be synchronize everything with my BB 8830.  However, the calendar gives me an error message;  "Connector specific error" after reading the calendar of my camera.  The entire synchronization process stops.  When I uncheck the 'calendar', then the rest of the shares will be synced to the top.  Any ideas?

  Hi and welcome to the forums!

  Here is an article on how to solve the problem.

  Thank you

  Bifocals

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB15294&sliceId=SAL_Pub...

• BlackBerry Storm 9530 smartphones. Had "the connector-specific error" when synchronize with outlook.

  Hello world.

  I just updated my storm 9530 with the ver.5.0 and has since got this version I'm not able to sync with my outlook 2003. Always got this message in french "Connector specific error" which means "the connector-specific error. Anyone ever had this problem. If so, how can I solve this problem. Thank you. Michel... Sorry for my English...

  Hi and welcome to the Forums!

  I think that the translation may be different... see if this KB applies to what you are requiring:

  • KB15294 "Connector specific error" when syncing with BlackBerry Desktop Software

  See you soon!