A single application on the third? computer

Similar Questions

• My laptop was stolen. The CreativeSuite has been installed. I also have programs on my Mac work in the office. When I buy a new laptop, I have to install the programs on the third computer. Is this possible? What can I do?

  My laptop was stolen. The CreativeSuite has been installed. I also have programs on my Mac work in the office. When I buy a new laptop, I have to install the programs on the third computer. Is this possible? What can I do?

  Hello

  You can install and activate the perpetual software (purchased) two computers of the same type (mac or pc), as long as you use it on one at a time.

  For deactivation refer:- https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  If you do not have access to your old computer because you have replaced a hard drive, upgraded your operating system to format your computer before you deactivate your software or your computer is dead, you can ask Adobe Support to help you disable from a machine, you cannot access. Have your serial number or Adobe ID ready, then contact us.

  To load the software on another computer, download and install it as you did on the first computer. Then enter your serial number to activate it.

  You can also see: -.

  https://helpx.Adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

• How to start a single group in the remote computer to the machine master

  Hello
  
  I want to know the command for any machine remote master boot of the machine and how to start a single group for the remote computer to the machine master.
  
  Thank you
  Amit

  You can start all of the remote machine (after you start the master of the machine) as follows:

  tmboot b -l .

  For all available options tmboot see http://download.oracle.com/docs/cd/E18050_01/tuxedo/docs11gr1/rfcm/rfcmd.html#wp1032112

  Kind regards
  Malcolm.

• A single application preventing the closure of the displayed error message...

  Hello

  When I closed my laptop, the displayed error message one application preventing closing down.

  as directed by your previous post, I have set up my laptop with it, but this problem yet and still occur.

  now the error message saying Windows host prevents your stop down.

  Please, help me to overcome this problem.

  Hi Regis,

  Thanks for posting your question on the Microsoft Community forums.

  I understand that you get the error message so that the closure of the system. However, I would like to know some more information on the issue to provide you with better assistance.

  1. Who is "previous post" you are talking about?
  2. What is the exact error message you get now on "Windows"host?
  3. You did it any significant hardware or change software on the computer before this problem?

  The question may arise if certain services (including background Windows services and other third-party application services) are still in operation when you try to shut down the computer.

  The applications or programs sometimes have ongoing services which are still ongoing even if you close your programs. Properties of an instance, there are many third party messengers that require you to sign in to use the application. Thus, when you close the application, the corresponding services are sometimes even functional whereby the program restarted in less time and log into the self-signed.

  Therefore, usually do not completely quit us some programs when we literally close them and so we get these guests. To diagnose the problem, you can restart the computer in safe mode when only minimal services are in use, you should not get these guests so that closing.

  If you do not get these guests in safe mode, you can also try to boot your system in a clean boot, a selective startup in the third that most of the services are disabled. To do this, you can consult the following link:

  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Hope this information is useful. Let us know if you need additional help on the issue, we will be happy to help you.

• Unable to connect to a different application on a third computer

  I have a subscription to creative cloud and Dreamweaver CC2015 installed on the #1 computer. I have Dreamweaver CS6 (not part of the subscription of the CC) installed on #2 and #3 computers. I cannot now begin ONE of these applications without getting the message on "you can't have 2 connections" and "sign on one of them" (not word for Word, the message is not open immediately). This feels like being not able to open, for example, Photoshop, because I have Dreamweaver open! CS6 DW doesn't do not part of the subscription of the CC, it's a completely different application, bought and paid for. I don't have the creative Office Cloud app installed on two of these computers (#1 and #2) but there seems to be no way to sign up on that if it factored into two connections, and I can't uninstall it even on computer #2 because it indicates that it programs there it which need it; NO program of creative cloud except the desktop app is installed on this computer. Any help?

  The two CC & CS6 could cause some conflicts, please discuss with us to Support Adobe

  Concerning

  Stéphane

• Run a LV-application on the remote computer

  Hi all

  I am trying to install an App LabVIEW functioning as a server in our local network. I might add this as a service in the respective machine autostart. However, I prefer to have a method to start the respective application of a different LV (vi or exe) go elsewhere in the local area network. This means that potential customers can start the server if it is not yet done.

  Does anyone have an idea? Searched for examples and the internet for no results.

  TIA!

  Greetings from the Germany!

  --

  Him

  This question comes up a lot.  And I always recommend PsTools from SysInternals:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896649.aspx

  They are a free set of command line utilities.  One of the utilities is PsExec which can be used to launch the exe on remote computers.

  NOTE: Remember that setting up your remote application as an "NT Service" is a little more complex.  If you manage to actually implement a 'service', you would actually use a different tool (PsService) to start a service on a remote computer.  Either one will do the job.

• Separate installs Palm desktop for Palm M505 and its applications, Palm Treo 680 and its applications on the same computer in Windows XP?

  Hello:

  I'm doing a work around. I have a Palm M505 with a fantastic keyboard that connects to it. This allows me to write documents in a very portable way. The Treo 680 has never been the equivalent external keyboard, really full compatible with it rendering. So, I want to create documents on the M505 but otherwise use especially the Treo 680.

  That's the problem. When I tried to synchronize two devices for my Palm Desktop version 4.1.2 for Windows XP, it did not work. HotSync to synchronize applications that do not work on the M505. In addition, versions of Documents to Go are very different (5.x versus 8.x).

  I have a separate installation of Palm Desktop for each device, so I can have a nice desktop environment for each launching them separately. But the Palm Desktop installation "Wizard" stops and does not give me the opportunity to do a separate install of funds.

  Any ideas other than the purchase of an ultra compact laptop and drop this scheme kludgy? For example, if I had to copy the installed files in files from one directory to another, this work or would would he not put in place in the registry?

  Thank you!

  Very well. Stubbornness is paying off! I could beam documents between my Palm M505 and Treo 680, avoiding the need of complicated synchronization of the two Palms for my laptop. I was also able to transmit documents of both palms to my laptop Dell Inspiron M300, running Windows XP Pro.

  When transferring between Palm devices, the results were better. In the M505, Documents to Go version 5,004 does not translate documents in Microsoft Word format, but in something he calls Word to Go. The Treo has DTG version 8.003, which is able to read files in Word format Go and save Microsoft Word for Windows format natively.

  However, even when transferring a word in the document (old format) Go directly on my Windows XP computer desktop, he gave me a document that I could open, with the text that I would be entered following a bunch of Word characters obviously did not understand. If I add the file from my office to the most recent Documents to Go version on my laptop, I would expect that it it mean in a Word file when it sync for the Treo, but who were not on trial. In both cases, beaming between devices Palm is the simplest solution and has completely solved the problem.

  For readers who are interested, that I so stubbornly tried to solve this problem because I am a typist quick touch. My old Palm M505 plugs directly into a Portable Palm both wonderful, old keyboard which is full size. Because it is a wired connection, I can type fast. This old keyboard compresses in the same footprint folded as some new keyboards external foldover. Even though much more bigger by folding it together in an accordion - like fashion, with record four flat surfaces. The design of this keyboard is now in some keyboards sold by the IGo Corporation (their former name for it was Sierra Stowaway Bluetooth keyboard). But they were unable to find a way to handshake their Bluetooth with the strange configuration Bluetooth in the Treo 680. Why from the library different Bluetooth in the Treo 680 Palm other Treo is a mystery to me, but enough of this tangent. Some interested by this workaround can be curious for the same reasons.

  Message is about: Treo 680 (Cingular)

• A single application but the different database table for another language

  Hello

  I have a word learning app for different languages. I would like if possible separate the application in different languages, so when the user goes to download, they can choose the language that they are eager to learn how to save their unnecessary download data.

  Is this possible or should I submit apps in a different way (and thus pay for each submission)?

  Im a complete newbie to BB development.

  Thanks in advance

  Kelly

  If you want to group the languages within your application then you must download separately for each version of your application.

  Another approach would be to have the download of the application language data from a server.  You can use the BlackBerry payment service to allow the user to buy the language of their choice within your application.

  BlackBerry payment service

  http://us.BlackBerry.com/developers/platform/paymentservice.jsp

• Windows could not start service CF2016 of the application on the local computer.

  Hello

  After a new installation of CF2016 all CF services work fine, but after I updated the "Java and JVM" she asks to restart the CF service, but when I do, I get the below error. Please help let me know the fix for the bottom.

  

  Thanks in advance.

  Java and JVM

  + 1

  Ditto for roll back the JVM settings. If you have made changes to JVM CFadmin then the previous settings would be cfusion\bin\jvm.bak. We can rename it to something else and then rename jvm.bak in ShadoMX/util/Flex/SDK/bin/jvm.config, kill CF and try start CF.

• Trying to install CC applications on the second computer, but can only access trial versions.

  Hi, I just subscribed today (permit student) CC.  I installed everything on my iMac and everything works fine, but after installing the software on my Macbook, it won't let me run 30 days trial versions.  As far as I know, I'm allowed to activate my apps on both machines. Anyone know what could be the problem?

  Back to the https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html of the trial

• Help download the applications on the new computer

  I can't seem to download the apps on my new mac cloud creatives. I have them on my old mac but I though you could have them on 2 computers. The only option I have is to 'try '. Pls help...

  Refer to this:

  Connect you or activation errors

  Contact support directly for anything else.

  Mylenium

• How to make the connection between applications on the computer with my subscription?

  I have Photoshop CS6 and Illustrator CS6 on my computer. When I open that is the one I get a message that says to contact my administrator to renew my subscription. I have a subscription. How can I get the apps to recognize the subscription or membership to recognize the application license, so I can continue to use? I have CC versions on work computer but versions CS6 on computer at home. No problem with subscription and applications on the work computer. With the home computer, apps will not identify subscription. Subscription has been implemented by the it Department at work.

  Hi Jody,.

  Please check the help below document:

  Using creative cloud | 'Renew your membership' window appears when you launch a creative cloud application

  Kind regards

  Sheena

• migration assistant crushes apps on the new computer?

  I've migrated user accounts to a new mac from an old mac. I want to migrate applications as well, but do not want to replace the existing applications on the new computer. How can I avoid this?

  Generally if you are migrating a newer Mac to an older apps, they will not work because the version is too new. Migration wizard is designed to transfer data to a newer Mac. It would be better to re - download the apps you want on the old computer to get the correct version. If none of them are paid 3rd party apps, they have a license or serial number. Download them on the old mac and then enter in registration. If you paid apps from the Mac App Store, they will be on your tab bought on the older Mac.

• Having Windows 7 Upgrade family pack, but will not let me turn on the 3rd computer

  I have a Windows 7 family pack update. I have this installed on 2 computers I installed on a third, but when I try to activate the automated phone line informs me that the license is only for a computer. How can I activate the third computer?

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your question clearly to the support person.

• Is it possible to buy a single application with a discount for students?

  I am a student and I want to buy Premiere Pro at a lower price. I don't see an option to buy a single application in the tab students and teachers at the choice of the plans. Is this possible?