A single modem towing cable routers wireless home - is it possible?

Similar Questions

• I just got a new supplier of cable installed at home and now we find that our usual printer print wireless. How can I add this to the new network?

  I just had a new supplier of cable installed at home and now we recognize that our habit of printing wireless printer, how can I add this to the new network?

  Hello

  • What is the brand and model of the printer?
  • What happens when you try to print?
  • You receive an error message?

  You can view these methods:

  Method 1:

  Disable the firewall and check.

  The Windows Firewall is enabled by default in this version of Windows. To make sure that it has not been disabled, follow these steps:

  1. open the Windows Firewall by clicking the Start button, then Control Panel. In the search box, type firewall and then click onWindows Firewall.

  2. in the left pane, click turn Windows Firewall on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. below for each type of network location, click on disable Windows Firewall, and then clickOK. We recommend that you turn on the firewall for all network location types.

  For more information, visit the following link:

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

• Connect two routers wireless from a modem, in two separate buildings

  I'm new here, not completely incompitant and certainly not to this day with all the jargon, please make a simple answer.  I need to install 1 wireless router in a building where I recently installed the clients of satellite internet system.  You will also need to come from this internet connection to another building from about 100 feet away, where I will install a second wireless router.  The routers I bought are "N" and exactly the same thing.

  In my mind, I could come of the modem, to the first wireless router, creating the network in this building.  Detach from one of the ethernet ports on the back of this router with a Cat5 goes out of the building, the second building, where I would connect the Cat5 into the wan port on the wireless router second creation of the network for the second building.

  Not sure if it will work.  Don't know about bridging.  Please keep it simple.  Any help would be appreciated.

  Thank you

  Me

  You don't want to connect to the internet port of the second router. Instead do it this way.

  With this configuration if use identical SSID and wireless security settings you can even create a mobile wireless network, which is a wireless client can move the wireless AP to another (assuming that there is of course an overlapping coverage).

• can receive bur can't send emails on my laptop wireless home network

  When connected to my work network or to use the iphone as a modem I can send/receive emails. When connected to wireless home I can receive but not send.

  When I do a self-diagnosis, it says THE LAN is not connected. Also I can send/receive my gmail account but not my business account?

  Any ideas?

  Hello

  ·        What operating system is installed on your computer?

  ·        What service provider or email client do you use to access the e-mail?

  ·        Are you connected to any server?

  If you use Hotmail, then post your query to the following forum:

  http://windowslivehelp.com/product.aspx?ProductID=1

  Reference: http://windowslivehelp.com/

• I have a computer 2 wireless home phone network, only administrator there?

  I have a wireless home network and I got a connected laptop. I added another one last week and I don't have administrator rights. I have no firewall or virus. I just want to know how to give the two pcs of admin rights so I can update my other laptop. We have administrator and the other not.

  I have a wireless home network and I got a connected laptop. I added another one last week and I don't have administrator rights. I have no firewall or virus because I can't access administrator? the two laptops running xp and are dells and both are connected to a router belkin on suddenlink cable. How to give administrative rights for both computers?

  It is quite easy to stop the menu "Select the hardware profile" to appear... Once you get connected to Windows.  Your post is not clear is whether or not you can do.

  What do you mean by "the other login page. the only user I know is the lowest user in the book?

  What version of Windows XP is on each computer (Home, Pro, Media Center)?  If you can connect to Windows, made a click right my computer and select Properties.  Also a report of the service pack.

  If you use the built-in account named 'Administrator' for daily use and connect your computers between them and the Internet "without protection of firewall or a virus", you should probably do a clean install of Windows on both computers.

  If you have important data on computers it back up to an external drive and scan with good antivirus and anti-malware applications before copying this back on your computers (after install it clean).

  Contact Dell for instructions on reinstalling Windows.

• Toshiba AT200 refuses to acknowledge my connection wireless home

  My AT200 refuses to acknowledge my connection wireless home.
  1st time, that he could not recognize, I restarted the broadband system and then recognized.

  Now he just continues to scan and will not find the connection?
  I tried to manually force but he said that it is not in the range - even when I'm standing right next to the box.

  This is a major issue - what is a Tablet without wifi connection - right?

  > Is there a way to reset to the factory settings?
  To reset to factory settings Android, go to:
  Apps-> settings-> privacy-> data reset > reset compressed-> clear all

• why I can't connect samsung galaxy s 3 to my wireless home connection

  Nice day

  Hello
  1. what happens when you try to connect?
  2 - is the wireless connection works fine?
  If the problem is specific to the Samsung Galaxy phone connection, I suggest you to contact the manufacturer for assistance on this issue.
  Support
  http://www.Samsung.com/us/support/
  See also:
  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx#fBid=QrmrthWykWS

  Start Galaxy S III Guide

  http://www.Samsung.com/us/article/Galaxy-s-III-Starter-Guide

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

• My wireless home does not appear on as a network available on my work laptop and always did before.

  My wireless home does not appear on as a network available on my work laptop and always did before.  He brings up and connect on my laptop. I have a Linksys broadband router - summer use it for at least two years with no problems until this.  I know that my wireless works on my laptop because there is an unsecured network listed in the available window.

  A really strange thing that happened two weeks ago (and I don't know if it's related) was my personal laptop was fine during several hours - then he kept abandonment of the internet connection.  I couldn't keep him connected - reboot etc didn't work.  I've not logged again until today - and that's what I use now.  He connected very well today.

  My work laptop had been connected to my wireless ealier in the week, but when I tried to connect as usual Thursday night he has not logged automatically as it has always done in the past.  Nothing has changed.  Security patches that my company had sent through this week have not downloaded until after that I tried to connect and couldn't.  There is nothing new - he had no reason to think I should not have automatically connected as I have in the past.

  Hi suemoo,
   
  -What version of service pack of Windows XP you are using?
   
  This problem occurs because the media connect action is not sent to the wireless service correctly.
   
  Method 1: Disable and then enable the wireless network adapter and check if it helps fix the problem.
  To do this, follow these steps:
  a. start the network connections tool in Control Panel. Click Start, click Control Panel, click on network connections and Internetand then click on network connections.

  b. right click on wireless network connectionand then click disable.

  c. right click on wireless network connectionand then click enable.

  Method 2: Try the methods listed in the following article and check, if it helps in fixing the issue:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

• Model15 - n208Tx F6C48PA #ACJ): Wifi don't work in all routers wireless inside the laptop model HP 15-n208Tx (product: F6C48PA #ACJ)

  Dear all

  WiFi (Ralink RT3290802.11bgn wireless adapter) do not work in all routers wireless inside the laptop model HP 15-n208Tx (product: F6C48PA #ACJ). He never hooked this kind of problems. When I try to use at work and office with different wifi routers it not connecting one. And always the laptop is stuck upwards and not in internet connectivity.

  Veuileez solve this isses?

  Kind regards

  Kevin, India

  The troubleshooter here may be useful:

  http://support.HP.com/us-en/document/c03535285

  Your Support page is here. Use Option 1 to search for an updated driver:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-N200-notebook-PC-series/6529948/model/6622575#Z7_3054ICK0KGTE30AQO5O3KA30R1

• Add Windows XP to a wireless home network

  Hi just to add a lapttop XP to a wireless home network. the network icons are shown as they are always posted on vista and windows 7 and is there a centre network for xp

  so do not know if the connection is correct. In addition, the Dungeon of connection keep out and reconnect. any help please

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi Vanchoch,

  Please visit the following link for instructions on how to connect a Windows XP-based computer to a wireless network:
  http://www.Microsoft.com/windowsxp/using/networking/setup/wireless.mspx#4
  With regard to the abandonment of the connection, I highly recommend download the latest drivers for your wireless network card. If you can get me the model number and the company that makes it, I can normally provide you with a link to the driver.
  In the meantime, the following link can provide some advice on troubleshooting for your connection:
  http://support.Microsoft.com/kb/870702
  Please let me know if I can be of further assistance!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Skype crashes since my attached ISP modem Arris cable to my computer.

  Skype crashes since my attached ISP modem Arris cable to my computer. In my reports on the problems and solutions I tells me that I have an incompatibility problem with the RCA digital cable modem I do not have.  I'm running a 32-bit Vista system.  How can I fix?

  original title: incompatibility problem

  Much appreciate the input.  Understood that the installation of the Arris modem was a coincidence - or perhaps it worsened the situation.  In this case, some of my settings were incorrect, more the old modem that had changed my ISP to was the RCA modem which was not compatible.  I uninstalled my programs and software in the control panel.  Everything works now.

• Once I open my network connections, he says: I connect to my wireless home, but my internet task bar continues to indicate that I am not connected.

  Once I open my network connections, he says: I connect to my wireless home, but my internet task bar continues to indicate that I am not connected. Is there a way to get to show him that I am connected?

  original title: my computer says that I am not connected to the internet when I am.

  Another solution: Red connection system icon even though I am connected... X

  "Try this. It worked for me.

  I finally removed my network security and the State of the network now shows me as connected. The Red Cross has disappeared. It seems that Windows 7 does not support WPA2-PSK. I can't imagine that's the case. Any ideas as to why, as it is installed on my PC, is an option for WPA2-PSK? As I said, the material is supported and worked with XP. »

  ...

  And another... where the problem was related to the third-party software:

  "I found a solution. I had recently updated my GOAL to the latest version and it is incompatible with the new vista. It seems to be a small bug in the operating system. How I solved it is uninstall AIM and the other program "Viewfinder" or something like that...
  After that I uninstalled both of these programs, the Red Cross had disappeared and I had no network problem either. I now use trillian and I have no problem. I hope this helps! »

• I wan to use connections cable and wireless with Windows 7.

  I use Windows 7. I have a wired ethernet connection, but also internal wireless.

  I want to be able to use both connections. I'm using VMware Workstation and it allows me to specify which adapter to use with the virtual machines. However, when Windows 7 detects there are two cables and wireless, it disables the wireless and automatically uses cable.

  How to use both?

  Hi Michael,

  Thanks for the reply. By the brand and model of the PC, I see that there is not a driver designed for Windows 7. Try installing the driver in compatibility mode. Is your problem with the virtual machines that you have running, the host computer, or both? If it's on the host computer and that you have installed the latest driver in compatibility mode for Windows 7, then it is probably a compatibility problem of driver/hardware that by default, this feature in Windows 7 works.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 will not detect THE routers wireless, including mine.

  Windows 7 will not detect THE routers wireless, including mine. I inserted the cd of restoration of the system, and after that he picked up no internet. No, even if I connect it with the wire! Help!

  Hello

  Thank you for contacting Microsoft Community.
  Is properly installed wireless adapter driver?
  Go to start-> type devmgmt.msc-> press on enter. In the Device Manager window, expand network adapters. You should be able to see a list of network adapter as Ethernet, Bluetooth, etc. Make sure that you can find the adapter wireless from the list. If so, double-click it. Properties windows will be open. On the general tab, under device status, if it shows that the device is not functioning properly, please remove the case, locate the wireless network card and make sure the connections of antennas are coneected correctly. If even a connection is not properly connected or damaged, you cannot connect to any WiFi network.
  Response if the issue is not resolved.

• With the help of Compaq SR5214X on wireless home network

  I have a Compaq SR5214X desktop PC I want to connect to my home wireless network.  What to I need to buy for this?

  Hello:

  Here is an article from Microsoft which should provide the information you need to set your PC to a wireless home network.  Basically, you will need to purchase a PCI internal or external USB wireless adapter for your desktop PC.

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

  Paul