A snapshot could not be created. Check the event logs application VSS amd SPP for more information. Details: the specified object was not found.

Similar Questions

• creating a restore point gives error 0 x 80042308: the specified object could not be found

  What is the specified object cannot be found - 0 x 80042308? trying to create a restore point in the protection system?

  a snapshot could not be created, please check "vss" and "spp" applications for more information event logs!

  Details: the specified object is not found! backup and restore system keeps giving me these messages!

  HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!

  Thank you!

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 3:
  Try the running System File Checker and see if it helps:
  http://support.Microsoft.com/kb/310747

  It will be useful.

• I get error 0 x 81000019 as a snapshot could not be created.

  Original title: error 0 x 81000019

  as snapshot could not be created. Check the event logs "VSS" AND "SPP" application for more information.

  Details: The specified object was not found.

  Error code: 0 x 81000019

  I wish that I kew how to solve this problem? I need back up my computer!

  Download new backup software help? I have an asus netbook with windows7 starter

  Help, please!

  Installed new hard drive and I have performed successful backup.

• A snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information

  Original title: a snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information. Details: shadow enough storage to create the copy storage file or other shadow copy data. Error code: 0 x 81000019

  I tried to back up my files using an external hard drive (which I have done before with Windows 7 64-bit), but recently I get the same error code. I have re-formatted external hard drive, run diagnostics on it, restarted the computer, etc and nothing seems to work. I also tried both options posted in another forum with the same error and too, they were not successful (external is already NTFS and now that it has been re-formatted is completely empty). Windows has more suggests? I hope not to have to use drag and drop my files whenever I want to save my computer.

  Thanks for the help!

  Read this article because I believe that the amount of free space in the 100 MB partition is too small. Article is a different error code, but the technique to increase the size of the 100 MB partition is the same.

  Note: Backup of your hard drive as described in the article.

  How to fix error code: 0 x 81000033
  http://www.PAGESTART.com/win7br0x8100003301.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Backup on an external hard drive, the error code 0 x 81000019 a snapshot could not be created. Pls chk "vss" and "spp" application event logs.

  A snapshot could not be created. Please check the spp and 'vss' ' applications for more information event logs.

  Details: Insufficient storage available to create the shadow copy storage file or other shadow copy data. Error code 0 x 81000019.

  The size of the external drive is free to Go 465,65 Go 465,75. Also "size of the backups is not available" is displayed under the size of the disk in GB. The size of the backup copy is 57 GB.

  Event logs see the backup error event ID 521

  GENRAL:
  Save the operation which started at 2010-03-11 T 13: 41:53 failed because the service operation volume shadow copy to create a shadow copy of the volume during backup failed with the error code 2155348249.

  Details:
  + System
  -event data
  backup time 2010-03 - 11 t 13: 41:53.466000000Z
  Error code 2155348249
  Error Mssg % 2155348249

  Hi Gilles Pelletier,.

  1. check the shadow copy Volume service in the services window. Use the following steps to check:

  i. click on start and type services.msc in the search box

  II. the search for the shadow copy Volume service

  Please let us know the status and startup type. Make sure that the startup type is automatic

  Steps to set the auto services

  i. search for the service

  II. right-click on the service

  III. If the service is stopped and then starts the service

  IV. Select Properties

  v. and in startup type, select automatic

  2 disable the firewall / anti-virus temporarily installed on your computer and then check if the problem still persists. If the problem is resolved, you will need to uninstall the software and reinstall it back or change the settings and check.

  3. even check a drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Check this link which has the similar problem: http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/9b18bc73-26e5-4b28-819f-11628ebbf5e2

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  Hello gentlemen,

  I can not only save this virtual machine with Backup Exec 2014 for a long time.

  They are there was no snapshot in snapshot Manager.

  Could you help me?

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  V-79-57344-38260 - failed to create a snapshot of the virtual machine. The virtual machine is no longer exist, or may be too busy to pause to take the snap.

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\FRPA111PRIM01.

  V-79-57344-38299-\vm\FRPA111PRIM01 ha-data center (DC) VMVCB::\\192.168.204.42\VCGuestVm\ (DC). To try to take a snapshot of a virtual machine failed because it could not be suspended in a file system.

  Hello

  I found the solution.

  I disabled the JOB BE general relativity.

  and the host where the virtual machine belong was not the right time. No Ntp server has been configured.

  I did and now there works.

  I think that the problem can come from this.

• Windows backup error: a snapshot could not be created. Error code: 0 x 81000019.

  Original title: Windows - no system reserved partition backup error

  Whenever I try to back up files by using the backup utility Windows 7, I get the following error message:

  "A snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information.
  "Details: the specified object could not be found" error code: 0 x 81000019

  The backup utility starts and says is 'create shadow' fails.

  In the research forums, I find a common solution to the increase in the size / cleaning of the system reserved partition.  My problem is that the system reserved partition does not exist on the computer.  The computer originally had Windows Vista and upgraded to Windows 7 x 86 Ultimate SP1.

  Is it possible to get Windows 7 backup to work without a system reserved partition?  If not, is anyway to create a system partition reserved without wiping the hard drive and reinstalling everything?

  Hello

  Thanks for the update.

  I ask you to answer these questions:

  1. the computer is connected to a domain or a group of House?

  2 NAS hard drive is located on a different computer?

  If the computer is connected to a domain, then I ask that you post this question on the forum of TechNet at following link:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverTS

  Please get back to us with answers.

• Windows backup error; A snapshot could not be created.

  Original title: Windows 7 - windows backup - snapshot could not be created

  When you use the Windows backup I get an error indicating that the snapshot could not be created unless I'm trying to backup to DVD or a USB hard drive.

  I use:

  Windows 7 Home Premium SP1

  processor Intel I5 2310

  8 GB RAM

  1.5 TB of hard drive

  The full message is:

  "A snapshot could not be created.  Check the event logs "VSS" and "SPP" application for more information.

  Details: Writer experienced a transient error. I have the backup process is restarted, the error does not recur. »

  Where newspapers there is an event id 8229 - I went to the event log online help and tried all of the listed suggestions, including shutting down my computer and then restarting him and still get the same error.  I tried to disable the antivirus software and do the back up but still get the same error.

  I have spent at the command prompt and typed "vssadmin list writers" to see if all the writers are stable and the following are not listed as stable:

  System Writer - State [5] waiting for completion

  MSSearch writer - State [5] waiting for completion

  WMI Writer - State [9] failed

  What can I do to get the backup to work?

  Hi Tom,

  I wish to inform you that this error may occur if the Volume Shadow Copy Service of Notification of SPP has not started and is not set to automatic. Please refer to these steps to learn how to start their:

  a. on the desktop, press Windows key + R to open the Run dialog box.

  b. type services.msc in the Run dialog boxand press Enter to open Services.

  c. right-click on the shadow copy volume and the SPP Service of Notification services, and then click Properties.

  d. if the box Startup type is set to Disabled, change it to Automatic.

  e. click OK to close the Properties window.

  f. right click on the Volume Shadow Copy and SPP Service of Notification servicesand then click Start. The service should start without errors.

  If you receive any errors, please let us know.

  See the Event Viewer for the exact error message or code, and the cause of the problem. Please let us know the same thing.

  a. click on the Start button.

  b. Type in the Event Viewer, in the search field.

  c. this will bring up the box of Event Viewer . Click to open the Event Viewer.

  d. in the left pane, expand Windowslogs.

  e. click the application log and syslog, one after the other. Select the first event in the log, and then use the arrow keys to scroll down. Most of your event will be in training. Maybe you will see yellow warnings or errors in red. If you see a red error, you can double-click on it to bring it and copy the contents into a document.

   

  Please get back to us with the results.

• Can not backup on external hard drive - "snapshot could not be created...» »

  Cannot back up the external hard drive "snapshot could not be created, please check the VSS application log and the PSP" "details - the shadow copy provider had an error" error code «ox81000019» I want to buy a new laptop, but how can I transfer all of the existing computer if I can't do a backup?

  As you go only to transfer data from one to the other files, here's a good option...

  Remove the old hard drive and connect it on the new computer using a USB to SATA connector like this...

  http://www.TigerDirect.ca/applications/SearchTools/item-details.asp?EdpNo=3276554&CATID=11527

  It is a very useful device to have some kicking around when you need to get data on a drive that does more boot.

  You must get permission to access folders on the old disk to the new computer and this is how you do it.

  Download the zip on the site below...

  http://www.howtogeek.com/HOWTO/Windows-Vista/add-take-ownership-to-Explorer-right-click-menu-in-Vista/

  .. and it is there that find the link to the zip on the site...

  

  When you run the zip file, it places a new item in the right click menu called 'Take Ownership'

  To use it, you highlight the file or the folder on which you want the property, right click and select take ownership.

  Then a window will appear and many data authorizations through pretty quickly. When permissions have been granted, the window will close and you will be able to easily access data in the file or the first selected folder...

• Cannot create a backup, error: "a snapshot could not be created."

  Original title: computer backup

  When you try to back up my computer, I get a message that says "a snapshot could not be created. Storage insufficient to create the shadow copy storage file. My D drive shows that it is full. Can I format drive D I can backup?

  Hello

  The D: partition is normally your recovery partition that you do not touch with the exception of the enumerated grounds.

  You don't tell us the size of your D: partition.

  There are between 5-15GBs, is the recovery partition and read more:

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  How to save properly:

  If you want to do a complete PC Backup or only a backup of files, buy an external hard drive.

  Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

  All editions of Vista can do backups of files.

  Here's how to back up and restore your files:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  http://www.home-PC-help.com/windowsvistabackup.html

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

  This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):

  «How to make a backup of the computer in Vista»

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  "How to restore a full backup of the computer.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  FAQ from Microsoft about backup and restore:

  "Back up and restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

  This program must be purchased:

  "Acronis True Image".

  http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

  These are free programs for the protection of the computer:

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  See you soon

• We get an error "could not create a new partition or find existing. "For more information, see the Setup log file" error message "while trying to install Windows 8

  * Original title: 8 victory moved - Error Message: failed to create new partition...

  I have Win XP on my Dell Dimension 5150, which is the dual boot with Linux Mint 12 Lisa and this is my favorite of the bunch.

  I bought the DVD of 8 Pro Windows by an Australian retailer.

  Win XP is on a 39 GB partition with other application files. I had to delete several files to get the free space necessary to WIN 8 and finally finished by formatting the partition and passes for a COMPLETE new installation.

  Unfortunately, I now get the "failed to create new partition or find existing. For more information, see the Setup log file"error message. I can't find a Setup log file that I do a boot from the DVD.

  I tried to delete all external drives and other USB devices, including my Modem but my Wired USB keyboard/mouse.

  Two internal HARD drives are as follows:
  Disk 0 Partition 1-110 GB - system (LINUX)
  Disk 0 Partition 2 - 3.5 GB - logical

  Disk 1 Partition 1 - 47 MB - OEM (reserved) [DellUtility]
  Disc 1 2:Win - 39.1 GB - System Partition
  1 3 disk partition: DATA - 39,1 GB - logical
  Disk partition 1 4:OfficeProgs - 19.5 GB - logical
  Partition on drive 1 logical - 39.1 GB - 5:PROJECTS
  etc to score 8 with 9 MB of unallocated space.

  I have tried both 64 and 32 discs with the same result.

  As I have now is no longer no matter what Windows on my computer, what's the next step? If any ;-)

  Hello

  I solved the problem. It seems that you can not install on a secondary partition with in an earlier version of windows. You must restart the computer and run the installation from a dvd or other media.  Once you get the installation running you should be able to install on another partition without any problems.

  Nice day

• Getting error: could not open the Virtual Machine: failed to query the Source for more information

  When I have a virtual machine to export to the FVO on an ESXi 4.0 and then try again to import the FVO on VMware Player or Workstation 7.1, I get the following message:

  «Could not open the Virtual Machine: failed to query the Source for more information.» I can successfully re-import this file OVF in an ESXi server without any problems. Anyone know why this is happening and what can be done to remedy this?

  Thank you

  Christopher

  Hello.

  Try to use ovftool to convert a VMX of the FVO.

  Good luck!

• The specified parameter was not correct: ".."

  Hello

  I am using VMware vCenter Converter Standalone to virtualize a few physical servers on an ESXi server.

  I installed ESXi 4.1.0 on a new server (quad core 2 processors, 48 gb of ram, a mirrored raid (where is the ESXi software) and a raid 5 for virtual servers).  I've already enabled 64-bit virtualization in the bios of the destination server.

  The first server I want to virtualize is a small server (Nothing mission critical).   The software main is executing is SpiceWorks.  I installed VMware vCenter Converter Standalone 4.3.0 Build-292238 on the source server.

  The error that I'm left with after you run the converter is:

  The specified parameter was not correct: ".."

  Let me guide you through the steps of how I get there.

  Launch of vCenter Converter

  Click on Convert Machine

  Under Select Source Type: Tension machine

  Specify the machine 'this local computer '.

  Next

  Select the Destination Type: VMware Infrastructure virtual machine

  Server: xxx.xxx.xxx.xxx

  user name: root

  password: password for root

  Next

  Name: leave the same...

  Next

  Select localhost.localdomain

  SELECT data store: Data1 (it was created on the raid 5 group, 860,75 1 GB of free space)

  Virtual Machine version: Version 7 of the

  Next

  Check the destination parameter... Check

  Let all the suggested default values / (go play with it more that one I get a working basis...)

  Next

  Summary (see bottom of post for summary)

  Finishing

  Special presentation...

  Then I get the error message

  The specified parameter was not correct: ".."

  The error message ends actually in times of double quotes

  If anyone has any suggestions, I would be grateful.

  Thank you.

  -

  ---

  Summary

  Information source system

  Source type: slot machine tension

  Name/IP address: the machine where works the VMware vCenter Converter Standalone server

  The CPU limit: None

  The network limitation: None

  Destination system information

  Virtual machine name: xxxxx

  Host/server: xxx.xxx.xxx.xxx

  Logged in as: root

  VM folder: None

  The host system: localhost

  List of resources: by default

  Power after the conversion: No.

  Number of processors: 2

  Physical memory: 3584 MB

  Network: Preserve County NIC

  NIC1 connected

  The VM network

  Type of disk controller: Preserve source

  Storage: The Volume of cloning-based

  Data configuration files store: Data1

  Customization of the destination

  Synchronize changes that occur during cloning: No.

  Install VMware Tools: No.

  Customize the guest operating system: No.

  Delete restore points: Yes

  Reconfigure the virtual machine: Yes

  in step 3 you can check to see if all volumes can be copied?  Just to make sure that it is a disk volume to move...

  The error should be something between the two tick marks, which is not double quotes.

  He complains that a value is null, rather than not null.  So, in step 3, make sure that nothing is missing.

  Kind regards

  Jon Hemming, b.SC., RHCT, VMware vExpert 2009
  http://Twitter.com/vJonHemming

  If your question or problem has been resolved, please click the "right answer".  If someone helped him, please click "useful answer.

• Troubleshooting of League of Legends asUnspecified error has occurred. Check the logs for more information"?

  Original title: League of the legions of troubleshooting

  I downloaded League of the legions, but when I try to run it, he will not work he arrived asUnspecified error has occurred. Please check the logs for more information. Please help I don't know what to do?

  Hello

  1. You are making reference to League of Legends?

  I suggest that you do check and clean boot, if that helps to resolve the issue.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

• Error NET HELPMSG 3521 while checking the Update Service was stopped and the error code "8024000".

  Original title: error NET HELPMSG 3521 while checking the Update Service was stopped.

  Windows Vista. 32-bit, SP1 and 2

  Long story short, I tried to fix my problem of update windows since the beginning of July 2011.  My computer does not stop when you install updates automatically or manually.  I got a 8024000 error.  A shot an email to Ms support and I received an email quickly with some procedures to do.  I don't have to make these 4 days later.  Here is the part of the email.

  This problem may be caused by the following factors:

  1. the Windows Update service has stopped.

  2 corrupt Windows Update temporary files.

  3. bad Internet connection settings.

  4 corrupted DLL files.

  Step 1: Check the services concerned of the update of Windows

  1. click on the button 'Start' in the 'Search' bar type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. double-click on the service "Windows Update".

  3. click on the 'general' tab. Make sure the "Startup Type" is "Automatic" or "manual". Then please click the button "Start" under "Status of Service" to start the service.

  4. repeat the above steps with the Background Intelligent Transfer Service (BITS).

  I completed this step.

  Step 2: Rename the folder C:\Windows\SoftwareDistribution Windows Update

  1. close all open windows.

  2. click on the "Start" button, click "All programs" and click on "Accessories".

  3. right click on "Command prompt" and click "run as Administrator".

  4. in the window "Administrator: command prompt", type "net stop WuAuServ" (without the quotes) and press ENTER.

  Make sure it is said that he has been arrested with success.  OK, it worked.

  5. click on the button 'Start' in the 'Search' box type "%windir%" (without the quotes) and press ENTER.

  6. in the opened folder, find the folder named "C:\Windows\SoftwareDistribution".

  7. right click on the folder, select Rename, and type "SDold" (without the quotes) to rename this folder.

  8. while still in the window "Administrator: command prompt", type the command "net start WuAuServ" (without the quotes) in the window to restart the service Windows updates

  It did not work.  I received a message...

  The syntax of the command is

  NET [accounts: computer: config: continue: file: Group: help: helpmsg: localgroup: pause: print: session: share: start: statistics: stop: time: use: user: view]

  C:\Windows\System32>_

  I tried again from the beginning and now get the following error: NET HELPMSG 3521

  "MS supports has not returned my emails to the technology or the Manager.

  Can someone help me?  Please notify.  Suzzz-Q

  There are many other measures that followed the foregoing.  If anyone is interested in reading all of this...

  Step 3: Component of Windows Update registry

  ============================

  1. click on the "Start" button, click "All programs" and click on "Accessories".

  2. right click on "Command prompt" and click "run as Administrator". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Enter the following command and press ENTER.

  REGSVR32 WUAUENG. DLL

  You will get a window "DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

  4. then please proceed to enter the following commands one by one. A success notification is received after each command.

  REGSVR32 WUAPI. DLL

  REGSVR32 ATL. DLL

  REGSVR32 WUCLTUX. DLL

  REGSVR32 STINKS. DLL

  REGSVR32 WUPS2. DLL

  REGSVR32 WUWEBV. DLL

  If please test the issue again and let me know the result. If the problem persists, I'll help you check your Internet connection in our next communication. To clarify the issue and provide more specific troubleshooting steps, please help me to collect the following information.

  How to capture a screenshot

  ======================

  1. press the button print screen (print screen) on your keyboard.

  2. click on the "Start" button, type "mspaint" in the search bar and press ENTER.

  3. in the Paint program, click on the "Edit" menu, click "Paste". Click on the "File" menu, and then click "Save".

  4. the dialog box "Save as" appears. Type a file name in the "filename:" box, for example: "screenshot".

  5. make sure that "JPEG (*.)" JPG; *. JPEG; *. JPE; *. JFIF)"is selected in the box"Save as type", click on"Desktop"in the left pane and then click on"Save ".

  Please send this JPEG file to my e-mail account to * address email is removed from the privacy *.

  How to retrieve system information

  =============================

  System information can provide us with more information about the current state of the system. I would check for you. Please send it to me using the following steps:

  1. click on the "Start" button, type "MSINFO32" in the search bar and press ENTER to start System Information.

  2. on the pop-up window, in the menu bar, click on 'File' and click on 'Save', type a file name and choose NFO as "Save as type", click on "Desktop" in the left pane and click Save.

  Please send it as an attachment to * address email is removed from the privacy *. If the file is too large to be sent, please right-click on the exported file, choose "send to"-> "Compressed file (zipped)" and then send the zip file for * address email is removed from the privacy * for further research.

  How to recover the WindowsUpdate.log file

  ================================

  1. click on the "Start" button, type "WindowsUpdate.log" (without the quotes) in the search bar and press ENTER. We will see a file named "WindowsUpdate.log".

  2. now click on the 'File' menu and click on the "save under".

  3. in the left pane, click "Desktop" and click the "Save" button.

  Hello

  Instead of all of the previous steps, you can just try the steps as shown in these methods and check if these help.

  Method 1:

  To resolve the error 8024000 follow the steps in the link and check if it helps.

  Windows Update error 8024000

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-8024000B

  Method 2:

  See also article on the resolution of the problems with the installation of updates and check if this may help:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates