C4580 installed on Windows 7 Netbook - no scanning

Similar Questions

• Photosmart C4580 installed on Windows 7 Ultimate and it won't work!

  Software installed on Windows 7 Ultimate and I can do everything except printing! When I ask for an example, I see a blank page and the printer does not print. All downloaded from the HP site and I'm tired of installing the update (CPE_SLP_NETWORKMSI_hpcom_000_006) because I don't think it's the solution because I tried several times and now I installed a version of Windows for the fourth time and I won't do it again. Can someone please help?

  With the help of HP customer care, I solved the problem! Problem is that the new installation of Microsoft was not correct. I never formatted the disk before the installation of new, and that was the problem. Thanks for the support!

• HP Photosmart C6380 will not install on windows 8.1 after upgrade. Can print but not scan.

  I recently updated my windows 8.0 to 8.1 Dell desktop and my 6380 photosomart would not work.  I downloaded the updated driver, and the installer hangs on "rotating disc icon" who then disappears.  It seems that the print function has been installed, but the printer doesn't scan.  Multiple level 4 uninstalls, restarts as well as disabling the firewall during installation;  I can print but not scan.   I know that the printer works fine I can scan my laptop.

  Hello there jcartmell,

  If you are still having the problem with the installation of your printer on your system Windows 8.1, I would try to help out. I read your post and saw that you tried several level 4 uninstalls and still have the same problem installing. I'll post you a few of my recommendations.

  • First of all, I would recommend a clean boot. How to make a boot in Windows (click on Windows 8.1 and follow the steps).
  • After you restart the computer from the boot, complete an uninstall of level 4, you have done previously.
  • When the computer restarts after uninstalling, reinstalling the software: series all-in-one printer, HP Photosmart C6300/6324 full feature software and driver
  • Afterwards, return to the clean boot procedure to activate the disabled services.

  I hope this helps!

  All the best,

• Is this possible and how? : install a Windows 7 Home Premium OEM from a laptop to a netbook with a Windows XP OEM computer

  Is this possible and how? : install a Windows 7 Home Premium OEM from a laptop to a netbook with a Windows XP OEM computer

  No, this is not possible.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  You will need a new license:

  Where can I still get Windows 7?

  Full version - Microsoft Windows 7 Home Premium

   

  Version upgrade - Microsoft Windows 7 Home Premium Upgrade

  Family Pack: Upgrade of Microsoft Windows 7 Home Premium Family Pack (3 users)

   

   

   

• I can't get my games installed on windows to play. I click on them, get the whirlwind as his work to open but does not work. Help!

  I can't my windows games to play. You know the ones that come already installed on Windows 7.

  Hi abarbato,

  Thanks for posting on Microsoft Answers!

  1 what is the error message when you run the default games in Windows?

  2 it is limited to a particular game or all games?
  
  3 use (SFC.exe) System File Checker tool to determine which file is causing the problem and replace the file. To do this, follow these steps:
  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833

  4. Uninstall and reinstall the games:
  1. click on start and in the search bar type "Turn Windows feature on or off.
  2. navigate to the games, and clear the check box next to it.
  3. restart the computer and same way go to the games and put a check mark (this will be re - install games)

  I hope that helps!

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install updates Windows XP error Code 0 X 80070670

  original title: CANNOT INSTALL UPDATES WINDOWS XP ERROR CODE 0 X 80070670

  CONTINUE WITH WHAT?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Problems installing updates windows Vista home 32-bit updates

  Hi, I have several times been impossible to install updates windows update tells me that I need for my computer.
  I have changed the settings from automatic to manual and vice versa and download updates, but are not installed.
  I am never given the opportunity to accept the license agreement.
  Some updates have not been installed.
  8007010B error code
  code 643
  I can't know what code 643 is.
  This has happened for months.
  Can what's up, anyone help?

  Thank you

  Hi zsaire,

  Let us know the updates that need to be download.

  First go through all the steps and then start troubleshooting.

  Step 1: Check if Windows update-related services are set to automatic and started.

  Click Start, type services.msc in the start search box, right-click to services.msc, and then click Run as administrator.

  Check the above services below:
  (a) Background Intelligent Transfer Service
  (b) cryptographic service
  (c) Windows Update

  Step 2: Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. at the command prompt, type the following commands and press ENTER after each line:

  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  net start cryptsvc
  output

  3 remove all tmp*.cat to the following folder:

  % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

  If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

  Important: Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  Step 3: Reregister DLL files that are associated with Cryptographic Services

  To register .dll files that are associated with Cryptographic Services, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.

  2. at the command prompt, type the following commands and press ENTER after each command:

  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll

  regsvr32 softpub.dll
  regsvr32 wintrust.dll
  regsvr32 initpki.dll
  regsvr32 dssenh.dll
  regsvr32 rsaenh.dll
  regsvr32 gpkcsp.dll
  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll
  regsvr32 mssip32.dll
  regsvr32 cryptdlg.dll
  output

  Note: Click OK if prompted.

  Restart the computer.

  Step 4: Empty the software distribution folder

  1. Click Start, type services.msc in the search box, click services.msc, and then click Run as administrator.
  2. in the Services (Local) pane, click Automatic updates and then click on stop.
  3. reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

  Note: by default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5. make sure that the Windows distribution folder is empty, and then enlarge the Services (local) window.
  6. in the Services (Local) pane, click Automatic updates, and then click Start.
  7 restart the computer, and then run Windows Update again.

  Article number: http://support.microsoft.com/default.aspx/kb/822798

  Step 5: Disable the security software

  Step 6: Scan Run SFC
  Please follow the steps below to the auditor of the filesystem as the first steps:

  1. Click Start and type cmd in the box start the search.
  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  Note: The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.

  ================================================================================

  If there are Microsoft .NET Framework listed updates to be installed, follow the steps mentioned in the article:
  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

  * Original title: hard drive

  I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

  Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

  If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.

• Scanner install problems - Windows 7 (64-bit)

  Recently upgraded to Windows 7 (64-bit) and everything was fine until I tried to replace my flat bed scanner and are now trying to get two scanners work. First scan was listed (as was the second on the compatibility Web site) Scanner Canon CanoScan LiDE200 USB. Went on Canon's site and downloaded the Win 7 scanner software and installed (after removing the previous version). Tried running the software and got a message "memory" and has been unable to act. Went to 'devices' and 'right click' the scanner and was able to scan using the windows software, so scan worked. Original printer took over and bought an Epson v30 scanner, same problem, installed new software (Epson Scan 3.04). Doulble click on the shortcut of Epson Scan, but nothing happens.
  A scanner does not and I think it's the materials, but both makes me think it might be something else, please notify

  If Irfanview doesn't mean that you are 'Twain' drivers are the problem.

  I have a Windows XP roceedure that usually fixes this kind of problem, but have yet to try it on Windows 7. I posted it below in case you are interested, but go forward with caustion. Note that some of the steps/information I already posted, but I'll post the procedure in his entirerty.

  ---------------------

  If you connected the printer multifunction/scanner to your PC and then
  installed the printer drivers/software, the chances are very high
  the printer can operate but function scanner will not.

  Most scanners or printers of multi use require
  that you install the software before connecting the scanner or printer/scanner.

  Step by step instructions:
  (1) unplug the MFP or scanner.
  (2) uninstall the printer/scanner software and two pilots to help
  the Add/Remove Programs option.
  (3) look/search folders associated with your printer/scanner model
  contains "Twain" files, if the files still exist after uninstalling.
  Delete these files and related files.

  Note: In the list of files that is found you can ignore everything
  files listed in:
  C:\Windows
  C:\Windows\system32\...
  C:\Windows\ServicePackFiles\...

  NOTE: In the C:\WINDOWS\twain_32 folder: you have
  one or more files. The one of "do not delete" is called: wiatwain.ds
  (wiatwain.ds is installed by Windows XP)
  All files in this folder were likely created when you
  installed the printer/scanner. Check each of the files 'Properties' and if has the
  brand of your scanner (Epson, Canon, HP, etc.), identified as the
  company/brand, these files can be deleted safely.

  On my PC I have my scanner HP twain file located in:
  C:\Program Hewlett-Packard\Precisionscan Pro 3.1\TwainCtrl.ocx
  There should be something similar on your PC, so in my case at least
  I would like to uninstall the software of Scanner HP and if it ' file TwainCtrl.ocx
  is still there after you have uninstalled the scanner software I would delete it.
  I have also a second that the file named "Twain_32.dll" TWAIN located:
  C:\Program Files\Adaptec\Easy CD Creator 5\PhotoRelay

  (4) check the Device Manager and remove all the entries if necessary.
  (5) create a Restore Point
  (6) analysis the registry using the name of brand/make of the scanner as a keyword for
  image search. (Remove all entries are, but make sure it's a connected scanner entry)
  7-restart the PC and check once more the Device Manager.
  It should not show any announces the printer/scanner.
  (8) now reinstall the software and two pilots.
  (9) shut down the PC.
  (10) the PC power turned off, connect the printer/scanner, then
  restart / Windows startup.

  Note: Sometimes there might help you try a different USB port if you
  printer/scanner is a USB device.

  An easy way to test your installation of the twain driver software work, s
  is to use a graphical editor named IrfanView.
  http://www.IrfanView.com/

  If you download, install and run this software,
  located in the menu bar is an option named "file".
  By selecting the 'File' option, you should find a
  (near the bottom of the list) option for named:
  'Select the TWAIN Source', click this option
  and then a popup should display valid Twain sources
  for scanner you. If you see your scanner from the list,
  Select it, and then try to scan an object (picture).

  By selecting the Twain Source in the file menu IrfanView should load
  your scanner software and then scan.

  If you choose the option "Copy Shop" also in the file menu you have the
  possibility to bypass your scanner software and directly scan a photo in
  IrfanView. Try the option "Copy Shop" and let me know what happens.
  Note that "Copy Shop" list of your Photo editing/scanning scanner
  software and hardware name (make and model) of your scanner when
  you click on the button "Select Twain Source" of the photocopy shop.
  You should choose the scanner hardware option.

  For example, on my PC the software Photo retouching/scanner is named:
  «HP Precisionscan Pro 3.1 "»
  The second entry "Twain list select the Source" Copy Shop is my scanner
  brand / model that shows that:
  "WIA-HP Scanjet 5470 C 1.0"

  So for me when you use Copy Shop, I select the second entry when
  prompt to select the Twain Source.
  I then check the 'Twain with the preview.
  (I mark this option if the scanned image does not directly)
  to the printer, but on the contrary is displayed in IrfanView).
  Then I click on the button 'start' location has the lower part of the photocopy shop
  window to start the search.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Trend Micro Titanium Internet Security won't install on Windows 7

  I bought a three user anti-virus (Trend Micro Titanium Internet Security) that will not install on Windows 7.  When I insert the CD it reads and seems to do something in the background, but there are has no windows that pop - up.  Also when I look in the Task Manager, I find no trend activity there.

  The version is a version licensed for 12 months I purchased with a new PC.  He said only Trend Micro Titanium Internet Security on the cover.

  If you have any other scanners 'real-time' installed (including MSE) it may be useful to backup your PC (so in the worst case you can go to at the moment), update scanners already have installed and then run a full scan with them to check the malware.

  Then completely uninstall, restart the PC and then see if the trend settled.

  See - http://support.antivirus.co.uk/trendmicro/kbresolution.jsp?hmid=52385&serviceId=31&applicationId=196 which States " ""with more security software or their components installed on your computer can cause performance problems. The programs in this conflict peut with your program of Trend Micro Titanium, are listed. "You must remove these of security software before installing Titanium: '

  I didn't trend and have never tested, so I can't say with certainty that their list of possibly conflicting software is preventing you installation trend, but it shouldn't take too long to remove all other scanners time real AV/Malware in article of trend and see. If the worst comes to the worst, you can always reinstall.

  You must have an AV program installed and running on a PC. On-Demand Scanner like free Malwarebytes Anti-Malware is OK as backup on demand scanners. (if you install this edition special anti malware utility, keep free, no need to start testing etc UNLESS you wish to purchase additional features the paid for version does not provide).

• Crashes after installing a new hardware, then fresh install of windows 7 on old HD

  Has decided to update some parts (motherboard, CPU, memory), and kept the source of power, hard drive, hard drive and case.  Had problems with it after the installation of the new equipment, would crash when windows starts (he did not altogether at the login screen).  So, I decided to start over with the new installation of Windows 7.  No dice, crashes again, but this time after about 10 to 30 seconds in normal mode (if I have connection immediately, otherwise it will crash if left on the login screen).

  Here is the log of the events of the last attempt to start (the oldest writing down) (including start in normal mode, then start in safe mode with networking)

  DCOM got error '1084' trying to start WSearch service with arguments "" to start the server:

  {7D096C5F-AC08-4F1F-BEB7-5C22C517CE39}

  DCOM got error '1084' trying to start WSearch service with arguments "" to start the server:

  {9E175B6D-F52A-11D8-B9A5-505054503030}

  DCOM got error "1084" try to start the service EventSystem with arguments "" to start the server:

  {1BE1F766-5536-11D1-B726-00C04FB926AF}

  DCOM got error '1084' trying to start the ShellHWDetection service with arguments "" to start the server:

  {DD522ACC-F821-461A-A407-50B198B896DC}

  Winlogon notification subscriber was unavailable to handle a notification event.

  The next (s) starting or starting system could not load:

  discache

  spldr

  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.

  The application-specific permission settings do not authorization for the application server COM with the CLSID

  {22279AF5-03AE-4CAF-989D-2530918B2F1C}

  and APPID

  {0773CCD6-59A2-4D26-B235-19247767E645}

  the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) of the address LocalHost (using LRPC). This security permission can be modified using the Component Services administrative tool.

  The application-specific permission settings do not authorization for the application server COM with the CLSID

  {22279AF5-03AE-4CAF-989D-2530918B2F1C}

  and APPID

  {0773CCD6-59A2-4D26-B235-19247767E645}

  the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) of the address LocalHost (using LRPC). This security permission can be modified using the Component Services administrative tool.

  Note: If you are Overclocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also check Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  = Test SSD software - revision: 12/04/14 =.

  Intel® drive SSD Toolbox
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Corsair SSD Toolbox:
  http://www.Corsair.com/en-us/blog/2013/may/the-Corsair-SSD-Toolbox

  Toolbox of Kingston:
  http://www.Kingston.com/us/support/technical/sandforce_ssd_toolbox.aspx

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  Seagate: http://www.seagate.com/support/internal-hard-drives/laptop-hard-drives/laptop-600-ssd/

  Life of the SSD: http://ssd-life.com/

  = Is installed after Windows =.

  Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
  Check their support site for the latest drivers as the CD that came with the computer
  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:
  Download and install the most recent Windows 7 or 8 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 8 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
  and the "SPD" tab shows the nominal speeds for each memory location that is filled.
  #2 Note:
  Compare the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Passage burn in test: http://www.PassMark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  CrystalDiskInfo:
  http://CrystalMark.info/software/index-e.html
  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/
  Monitors the State of health and the temperature. Solid State Drives brackets (value of the software).

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• Windows 7 Media Center: scanning channels - System.EntryPointNotFoundException

  My Windows 7 Media Center has worked very well for a few years, a few days ago, some television channels have lost their EPG and I then ran the channel scan who got in what relates to downloading the guide, then crashed as it seems to start to scan channels:

  System.EntryPointNotFoundException was not handled
  Message = entry point was not found.
  Source = ehiProxy
  TypeName =""
  StackTrace:
  at ehiProxy.BackgroundScannerClass.StartScan)
  at MediaCenter.FirstRun.GlidServiceScanner.Start)
  at MediaCenter.FirstRun.ScanPage.StartScanners)
  at MediaCenter.FirstRun.ScanPage.StartScan)

  ...

  I deleted it and reinstalled Media Center in Windows 7 features and erased, it has databases using "mcupdate - MediaCenterRecoveryTask" and deleted all the latest Windows updates (but not security patches) and I tried a different USB TV tuner but it always crashes.  As I know everything, but the channel scan works very well.  I don't often find chains so don't know when it went wrong, but can not think of a new software which would have affected it.

  Probably the exception I have now two incompatible parts of the software on the machine, but what are they and how can I solve this problem?

  Ideas please...

  Finally, I had all this work once again :)

  To do this, I uninstalled all Windows updates and patches safety installed this year, uninstalled Windows Media Center from Windows features, rebooted and reinstalled Windows Media Center.

  At this point, he still had the flaw.  Finally still with no idea of what could be the problem, I gave up, ran the scan channels one last time which failed, then reinstalled all the Windows updates, try running Windows Media Center Channel Scan again just in case, and it worked perfectly, the guide is also fully filled again.

  I guess you updates of Windows was installed incorrectly and killed the Media Center channel scan.

  Thanks for trying to help.

• Impossible to install 10 Windows on Bootcamp partition

  #1

  Hello! I just tried to install Windows 10 on my Macbook with a 32 GB USB using Bootcamp. Everything was fine until I came to the part where I have to choose the partition where I want to install my Windows 10 and of course I chose the Bootcamp partition, but in fact I couldn't click on 'next' (I was so stupid and don't format it).
  So I just format the Bootcamp partition and when I tried to click 'next' he just told me 'we could not create a new partition or locate an existing one. I went through google and searched all regarding this problem and there are a lot of guys having almost the same or exactly the same 'error' when trying to install 10 Windows on the Bootcamp partition, but nothing has really helped me. I deleted everything except my USB key and someone told me that I should only have 4 partitions or less.
  He shows me the 4 partition but there are two partitions (3) and two partition (1).
  Is this a problem?
  Here is a picture of my diskutil list: https://i.gyazo.com/f554fb8aac609c2420f55f9696fa06a6.pnggiven that English is not my native language, I'm sorry for my bad spelling.
  I hope someone can help me install Windows 10 with Bootcamp! Thank you very much!

  You have a Fusion drive, which is usually not sold on a MacbookPro? You can check model/year your Mac? Please, do not post the serial number of your Mac.

  If you replaced the optical drive to create your own Fusion player, you can run the questions, depending on the year/model of your Mac.

• iCloud error after installing the windows update 10 v.1607

  After you have installed upgrading Windows 10 to v.1607 (adding birthday) my icloud will not install on my Windows Office/outlook.

  I have deleated and installed the latest version of icloud, but I get a message that icloud is not installed correctly.  Make the repair on Icloud, but still does not work.

  After you remove or uninstalled, restart?

• How to use fonts (installed in Windows) Mistral in Thunderbird 38.0.1?

  Mistral and several other fonts are installed in Windows 7. In earlier versions of Thunderbird, I was able to use the MIstral and all other fonts in Windows without difficulty. Mistral and many other fonts in Windows 7 are now available in Thunderbird 38.0.1.
  Why these policies - in particular Mistral - are now unavailable in Thunderbird 38.0.1 and how can I fix this?

  I use Mistral for my personal signature and it is extremely annoying and irritating to find it is suddenly unavailable.

  Your help will be appreciated.

  Thank you

  Gloria Eive

  Nadine said

  Mistral and several other fonts are installed in Windows 7. In earlier versions of Thunderbird, I was able to use the MIstral and all other fonts in Windows without difficulty. Mistral and many other fonts in Windows 7 are now available in Thunderbird 38.0.1.
  Why these policies - in particular Mistral - are now unavailable in Thunderbird 38.0.1 and how can I fix this?

  I use Mistral for my personal signature and it is extremely annoying and irritating to find it is suddenly unavailable.

  Your help will be appreciated.

  Thank you

  Gloria Eive

  Thank you, Matthew, but I fear that we have still not solved the problem of Thunderbird.
  Mistral is a TrueType font and was readily available in all editions of Thunderbird before the current version: 38.0.1.
  Of course the technicians who designed this update have changed something in the program so that TrueType fonts are no longer available. I need to use the Mistral. Parameters of the italics and the other options available in Thunderbird 38.0.1 are not acceptable.

  The question is "How can I access TrueType fonts in Thunderbird 38.0.1?

  Thank you very much
  Gloria Eive
  [email protected]