A t540p copy of the data to another

Similar Questions

• Need some ideas on the copy of the data from one schema to another.

  Dear all,
  
  I would like to know the best method and possible by copying data from one schema to another. (I won't use EXP / IMP).
  Example:
  
  
  I have a scheme of production on which I have hundreds of tables. I copy the data of the TEST environment after comparing data, I should copy the data incrementally.
  Maybe this copy of data may occur once a month, or on request.
  
  I want to have this done by a procedure.
  I was thinking about the logic below, using a procedure I will compare the tables and the structures between the two schemas.
  Then I willl use the primary key in both tables column and compare the data first. If the data if it does not exist then I only inserts these records in the target.
  The above said logic could be as similar as the synchronization of data or records, but the table does not all columns to track records archived / copied from the source.
  Suggest me so if you can give me the best logic or solution.
  
  Thanks in advance...
  
  Concerning
  Suresh

  GSKumar wrote:
  Dear all,

  I would like to know the best method and possible by copying data from one schema to another. (I won't use EXP / IMP).
  Example:
  I have a scheme of production on which I have hundreds of tables. I copy the data of the TEST environment after comparing data, I should copy the data incrementally.
  Maybe this copy of data may occur once a month, or on request.

  I want to have this done by a procedure.
  I was thinking about the logic below, using a procedure I will compare the tables and the structures between the two schemas.
  Then I willl use the primary key in both tables column and compare the data first. If the data if it does not exist then I only inserts these records in the target.
  The above said logic could be as similar as the synchronization of data or records, but the table does not all columns to track records archived / copied from the source.
  Suggest me so if you can give me the best logic or solution.

  I don't know why you don't want to opt for EXP/IMP.
  As an alternative, if you have a link DB between Production and Test pattern (which I seriously doubt), you can use the MERGER to a copy of data from Production to Test Delta.
  a. INTRODUCE IN test_schema.table_name SELECT sequence_columns, column_list FROM (SELECT column_list FROM prod_schema.table_name LESS SELECT column_list from test_schema.table_name)
  Column_list must not contain columns that contain sequence values because they may differ and result in an incorrect result; Therefore, this is taken into account in the outer query rather than Inline mode.
  b. MERGE STATEMENT
  c. FALL of test_schema.table_name. CREATE test_schema.table_name as SELECT column_list from prod_schema.table_name; -A way very neat to copy all the data, provided you do not keep any changes to test the tables in the schema.

  However, you mentioned to find existing records based on the primary key; IMO, primary key is normally a sequence (may be alphanumeric) and its value on env Production and Test may defer or even can have different attributes, therefore, I find it incorrect to match only the primary keys. I would say to match the key attributes.

  If you want to follow the last update/insert for a record, you can add a column that puts the time of last modification. In this way, you can track the changes of a column. Another alternative would be to use a check to the table.

  Let us know your thoughts or concerns, so that help can be provided.

  I suggest that you read and follow {message identifier: = 9360002}.
  If you will be useful if you can provide all the information required in advance to help us provide you with a quick resolution.

• Quick way to copy all the data to Ipad Air 2 for Ipad Pro

  I would like to copy all the data on my Ipad 2 for the new Ipad Pro Air I just bought to avoid Delisle in downloading applications.

  Hello

  You'll be happy to learn that it is a very easy process!

  This should help:

  Transfer the contents of an iPhone, iPad or iPod touch to a new device - Apple Support

  Let me know how you go!

  All the best.

• RMAN issues - no backup or copy of the data file found

  Oracle 11 g 2

  Linux RHEL 6.5

  I inherited a database backup and restore question since the DBA is OoO.

  Here is the script used for the backup:

  Configure default device the disk type;
  Configure controlfile autobackup on;
  Configure controlfile autobackup peripheral type disc format in ' / u01/app/oracle/bkp/controlfile/%F.ctl';
  Configure retention policy to recovery of 30-day window;
  View all;
  Run {}
  stop immediately;
  bootable media;
  allocate channel dup1 device type disk;
  allocate channel dup2 device type disk;
  SQL "create pfile =" /u01/app/oracle/bkp/pfile/initpfile.ora "of spfile;
  backup format ' / u01/app/oracle/bkp/cold_db/cold_bkp_%U' database;
  output channel dup1;
  output channel dup2;
  ALTER database open;
  }

  When I try the following restore script:

  run
  {
  Start pfile='/u01/app/oracle/bkp/pfile/initpfile.ora' nomount;
  Restore controlfile to ' / u01/app/oracle/bkp/controlfile/c-123131414-20140509-00.ctl';
  change the editing of the database;
  restore the database;
  ALTER database open resetlogs;
  }

  I get error RMAN-06023: no backup or copy of the data file found

  I'm trying to restore a database backup from 5 days ago and I use this backup control file.
  

  I'll close this discussion and continue to involve the Oracle.  Thank you all for your help.

• Move the data to another file system file - affects on the day before in a DG?

  If I want to move a file of data to another file system, because the current file system is full, I'd take the tablespace offline and unix, copy the data file to the new location and rename the tablespace to the new location.
  
  How would behave the night before in a dataguard environment? The DOF would apply, but could I take a tablespace offline space, waiting for read-only copy the data file on the unix sleep?

  Hello;

  I think that this would be ' rename a Datafile in the primary Database.

  If you don't rename the data corresponding to the watch system and then attempt to refresh the database backup control file, the standby database will attempt to use the data file renamed, but it will not enter into it. (the change is not propagated to the database pending)

  See Section 8.3.4 rename a data file in the primary database in the Document Oracle B14239-05 (Oracle10)

  This is a step by step on how to handle this.

  OR

  Chapter 9.3.4 rename a data file in the primary database in Oracle Document E10700-02 (Oracle 11)

  Best regards

  mseberg

  Published by: mseberg on December 1st, 2011 09:15

• How to copy all the data to repeat the subform to second repeating subform

  I have a repeating subform on P1 which will have a variable number of rows created.  Then on P4, I another repeating subform, with the same fields, that subform P1 data must be copied to.  I tried many things, but my skill level is not too big, so none of them have worked entirely.  I have a working partially on a button named CopyAll script, but it is not very elegant and throws an error message when you arrive at the end of the number of lines that have been created in the subform of P1.

  Can anyone suggest a fix to this script or a better method of script?  I think this must be tough, since everything what I found on the forums that are similar to this one have not been resolved either.  I enclose a copy of my form.

  In the case of exit of the 1st subforum.invoice, you will find the code to assign the value to his "brother" on page4.

  In addition, the Add button, I added the code to add a record to the subforum page4.

  To do this you will need to copy/past the code of the output event in all the fields that you want to copy and the xfa.resolvenode command ("XXXXXXX [] .fieldName") replace fieldname with the actual name of the field that you're there.

  I didn't ' t do anything for delete you "line" button because I know not how you want it to work, but if you want to control the p4 with p1 Subform subform, you should not allow for the lines to be deleted directly in the subform p4.

  I hope this helps.

• (Question LVOOP) How one access the data of another class in another class?

  Hello-

  Ass title suggests, how do I access another class (or is it class?) data from another (different) class?  I will attach a picture showing where my problem is...

  I was told this:

  http://zone.NI.com/reference/en-XX/help/371361H-01/lvhowto/setting_scope_classes/

  May contain some helful info, but I can still understand how to unbundle Renault of classes inside the component class data (as seen in the attached photo).

  I think there could be something simple I'm missing here when it comes LVOOP or OBJECT-oriented programming in general... If any of you are willing to help me, it would be much appreciated!

  Thank you!

  -pat

  Personal data are always private, you can never set public. Unbundle cluster function can be used only on the thread of class when he is in the class. If you need to access private data, you must create accessors.

  It of simple, just the class right click and select new, VI for access data members. He invites you to a dialog box to fill you with what you want to create, elements of data and if you want them available through property nodes (recommended). Once completed, this will generate the Afterward screw., you can use in any other VI. The nice thing about making them nodes of property is that you can plop down a property node and it thread class, and all the created accessor functions will appear in the list.

• Copy of the data of the disk of the virtual machine on a Local disk is too slow

  We have recently implemented vMware view.   We vSphere 5.5 and 5.2 and made Desktop visualization server.

  We have SAN as HP 3Par and Esxi hosts are HP ProLiant DL380p Gen8

  Now all trying to copy the data from the disk of the virtual machine disk of the local computer are too slow. But if we are writing data from Local disk on the disk of the virtual machine is normal. And copying data between the two virtual machine disk is also fast.

  Thanks in advance for your help

  Dear all,

  Thanks for your help.

  We have analyzed the issue in 360 degrees, and we also examined your entries. Finally, we found the problem. It was that a defective fiber link has been creating the problem.

  We have recently implemented vMware and this flaw in fiber can also happened during this period. That's why we thought it may be because of vmware.

  Thanks again for your help

• Pass the value of the date to another element on a page to another

  Hello
  
  On one page, I have a hidden item that stores the sysdate.
  
  I want to spend the date value for this point to another hidden on another page in the format DD-MON-AA HH24:MI:SS.
  
  It seems impossible because Apex puts time value in the url with a colon, which is used as a delimiter, so all I get is HH24 JJ-MM-AA... and I lose all the following values that should be passed as well.
  
  for example
  
  25 JANUARY 11 11:03:25
  
  is passed as
  
  JANUARY 25, 11 11
  
  Any ideas to overcome this problem.
  
  was soon Paul
  
  Published by: ent on 31 January 2011 01:40

  Hello
  Another way is to write before the process of the header (or perhaps computing will be better) on the page of the item target, which gets the value of the source element, turn it into something as you wish and sets target the value of the element.

  Jirka

• Save the data in another table

  Hello, I would like someone to help me with a problem I have in my program.
  What makes the program is, for each iteration, take the data in 'table iter' and recorded in "table of output." But in the second iteration instead of storing the results of the first iteration offer me '1' in the first five lines.

  How can I solve this problem?

  Thank you, Jaime

  Hi pescajaime,

  Please make the change mentioned in the attachments.

  Thank you and best regards,

  srikrishnaNF

• How to recover data from textfield, select location and fill in the data of another textfield

  I want to be able to enter a number or text in a field, and then select a location for the data to be placed in the world based on the selected location

  Here's a form Im trying to get to work.

  http://www.myschooljacket.com/OutputLocation.PDF

  Thanks for any help you can lend.

  OK I've got get it now... is your modified sample.

  Paul

• RMAN-06023: no backup or copy of the data file

  Hi all
  
  Database: 10.2.0.1.0
  
  During the restoration of database of rman backup, using the recovery catalog, I am getting error below:
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 2010-07-06 16:44:12
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of the file 4 found to restore
  RMAN-06023: no backup or copy of datafile 3 found to restore
  RMAN-06023: no backup or copy of datafile 2 found to restore
  RMAN-06023: no backup or copy of datafile 1 found to restore.
  
  I did the entire task required as backup, backup of the datafile overlap list #;
  
  These orders showing as backup status: AVAILABLE
  
  Please help me to restore the database:
  
  Thank you
  Vipin

  VipinK wrote:
  Hi Alex,

  RMAN > list incarnation of database;

  List of Incarnations of the database
  DB key Inc key STATE ID DB name DB reset reset time SNA
  ------- ------- -------- ---------------- --- ---------- ----------
  1 8 TEST 2020618919 PARENT 1 30 AUGUST 05
  1 2 TEST CURRENT 2020618919 534907 JUNE 23, 10
  1 314 TEST THE 2020618919 ORPHAN 1228265 2 JULY 10

  Also I tried to reset the database incarnation to 2; but no use same problem occurs again:

  Don't need to reset need reset 2, 314 (ORPHAN 1228265 2 July 10) database and try again as follows:

  rman target /
  reset database to incarnation 314;
  restore database;
  recover database;
  

• Is it possible to access backups performed by a single copy of the Lr of another copy?

  After trying to help anewer a question asked by someone who is original Mac had apparently broken irreparably, I was wondering if it was possible to do what I asked above - backups of access by a single computer in unworking, that were said to be stored in the cloud, another copy of Lr on another machine?

  If I had two machines, I would try it myself, but I only have one office.

  If you download the catalog from the cloud file and place it on your computer, and then in Lightroom using file-> open catalog.

  Of course, you would need to recreate a link to the photos on your computer, otherwise you will not see the photos and you will not be able to do anything in this downloaded catalog.

• Copy of the subprogrammes in another schema

  I need to copy 3 functions of one schema to another. I already have connections for both of these patterns. Can someone tell me the best way to do it? It seems that you can just drag and drop.
  I use the version 1.5.4.
  Thank you.

  All PL/SQL in sqldev is formed as a executable script, then you can simply copy the content of the functions to the Clipboard, and then paste it into the spreadsheet to the destination schema and run (F9 or F5).
  For larger volumes, better use of the database or export Diff tools.

  Have fun
  K.

• Bug in the use of the date of another field module

  Today I met very weird behavior in the use of a datefield in a rule. I made a little video of my screen, which shows the behavior.

  Can someone help me with a workaround, or tell my what I did wrong?

  Thank you!

  Han Joosten

  The error is probably not specifically identify the problem - it's just trying to figure out the cause.  I have reproduced this error based on what I * think * are attributes defined and I think the real error is that there is no attribute "of emigratiedatum migratie van" in the entity of"migratie".  Once I added this attribute (such as a date or a date and hour) then the rule compiles.