A USB device has exceeded the limits of its hub port power
Hello. a problem occurred while my daughter was using my pc. She is often in and out with his flash drive. I'm come home to find that she had swapped mouse USB cos the orig had stopped working. Same thing happened with the replacement and I got the above error message. Now the mouse has frozen and no USB device is recognized. thought I had a defective mouse but brand new purchased and all also died. Have tried to throw the mouse in all USB ports but none works.
I'm not getting no messages. My flash drive lights up momentarily when inserted then goes dead and does not appear on the list of Solution Explorer. I'll have to navigate in Windows using the keyboard only - a pain.
I tried to uninstall all USB devices through Dev mgr, then restart. Everything went through the reinstallation but no joy.
I have 4 in the back and 2 on the side front of the PC.
PC is a HP Pavilion, Pentium® 4 CPU 3 Ghz, 1 GB RAM, Windows XP Home SP3.
Can someone please help? I have followed several threads on the net, but none fit my situation.
' ppreciate it.
Hi turloch.
- Have you recently had any power surge?
You can try to perform a restore of the system on the computer to the point while it was working fine and check if it helps.
How to restore Windows XP to a previous state
http://support.Microsoft.com/kb/306084
Because the uninstall and reinstall all USB controllers on the computer did not resolve the issue there is a possibility that it's defective hardware device on the computer that is independent of the windows.
Tags: Windows
Similar Questions
-
The printer is a Hewlett Packard hp psc 1110, which works perfectly for many years. Now, whenever I connect via the hub port, I get the message above stated in the title. I tried other ports the and even bought a new connection, but with the
same result. The printer works perfectly when not connected to the laptop either as a copier. Can you advise please.help.I just replaced mine, same problem on both xp and win 7, it was the usb key. He wore out I guess. I replaced the printer (mine was also a bit old) and I have no problem now.
Sometimes, they are just broken...
-
Peripheral USB composite has failed the Windows Logo test?
When you try to install LifeCam Cinema on my Windows XP with SP2, I receive a message that the composite USB device has not passed Windows Logo test & impossible to install the software for webcam. When the device is plugged into the USB port, it is not recognized. However, I use this same port to download photos from our camera & it works great. I've tried everything... any solution?
Make a right click my computer and click Properties, click hardware, click driver signing.
Click on ignore, click OK, OK.
-
Hi all
I started playing with OEMM and I get the following error when I try to 'Trace Data Impact' in an Oracle table. Here's what I do:
- I created a template and collected a few schemas/tables:
- Now when I try to "Trace Data Impact' on the table AP_DEF_STG, I get the following:
I already tried to create a "Configuration" for her, I tried to text instead of graphics, but the error is the same. If I go to a view of Oracle and do a "track Data Lineage", I get the same error again.
That someone was already been in this situation? This is the full error trace:
({"error": true, "errorMessage": "SQL error during the tracing of lineage: ORA-22813: value of the operand exceeds the limits of the system"})
', 'errorType': 'Line error', 'errorCodes': "[LNGTRC_E0016]".
","stackTrace":"Error Codes - [LNGTRC_E0016].
Request - VizModelLineage
Settings - showInternalObject [false] showNoType [true] showControlLinks [false] startingIds [17 #4723 #0] isBizUI [false] ObjectID [17 #1 #0] showSummaryView [true] collapseLevel [features] resetCache [fake] profile [] showMappingsAsNodes [true] skipCache [false] tracingDirection [3] tracingType [DataLineage] [ReportTree2202015-104855025] originalStartingObject cacheId [17 #4723 #0] viewType actionType [loadlineage] of viewId [ReportTree2202015-104855025] [ModelLineage]
MITI.web.common.exceptions.LineageUIException: SQL for tracing line error: ORA-22813: value of the operand exceeds the limits of the system
at MITI.web.common.service.facades.LineageFacadeImpl.getLineageGraph (LineageFacadeImpl.java:284)
at MITI.flash.tabs.VizModelLineage.getLineageTree (VizModelLineage.java:429)
at MITI.flash.tabs.VizModelLineage.buildLineageGraph (VizModelLineage.java:356)
at MITI.flash.tabs.VizModelLineage.performAction (VizModelLineage.java:148)
at MITI.server.servlets.FlashServlet.doPost (FlashServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:646)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:421)
at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:1070)
to org.apache.coyote.AbstractProtocol$ AbstractConnectionHandler.process (AbstractProtocol.java:611)
to org.apache.tomcat.util.net.JIoEndpoint$ SocketProcessor.run (JIoEndpoint.java:316)
to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:895)
to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:918)
to org.apache.tomcat.util.threads.TaskThread$ WrappingRunnable.run (TaskThread.java:61)
at java.lang.Thread.run(Thread.java:662)
Caused by: MITI.server.services.lineage.LineageException: (LNGTRC_E0016) SQL error during the tracing of lineage: ORA-22813: value of the operand exceeds the limits of the system
at MITI.server.services.lineage.database.LineageDataSource.handle (LineageDataSource.java:41)
at MITI.util.database.CommonDataSource.handleSQLException (CommonDataSource.java:124)
at MITI.util.database.CommonDataSource.executeTransaction (CommonDataSource.java:83)
at MITI.util.database.CommonDataSource.executeStatement (CommonDataSource.java:54)
at MITI.server.services.lineage.impl.LineageImpl.traceLineage (LineageImpl.java:554)
at MITI.server.services.lineage.common.LineageTracer.traceLineage (LineageTracer.java:1078)
at MITI.server.services.lineage.common.LineageTracer.traceDataLineage (LineageTracer.java:313)
at MITI.server.services.lineage.common.LineageTracer.traceTechnicalData (LineageTracer.java:176)
at MITI.web.common.service.facades.LineageFacadeImpl.getLineageGraph (LineageFacadeImpl.java:245)
... 21 more
Caused by: java.sql.SQLException: ORA-22813: value of the operand exceeds the limits of the system
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:791)
at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:866)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1188)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3487)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at MITI.util.database.Query.executeStatement (Query.java:45)
at MITI.util.database.Statement.execute (Statement.java:66)
to MITI.util.database.CommonDataSource$ 1.run(CommonDataSource.java:50)
to MITI.util.database.CommonDataSource$ 1.run(CommonDataSource.java:47)
at MITI.util.database.Transaction.execute (Transaction.java:92)
at MITI.util.database.CommonDataSource.executeTransaction (CommonDataSource.java:80)
... more than 27
Caused by:
MITI.server.services.lineage.LineageException: (LNGTRC_E0016) SQL error during the tracing of lineage: ORA-22813: value of the operand exceeds the limits of the system
at MITI.server.services.lineage.database.LineageDataSource.handle (LineageDataSource.java:41)
at MITI.util.database.CommonDataSource.handleSQLException (CommonDataSource.java:124)
at MITI.util.database.CommonDataSource.executeTransaction (CommonDataSource.java:83)
at MITI.util.database.CommonDataSource.executeStatement (CommonDataSource.java:54)
at MITI.server.services.lineage.impl.LineageImpl.traceLineage (LineageImpl.java:554)
at MITI.server.services.lineage.common.LineageTracer.traceLineage (LineageTracer.java:1078)
at MITI.server.services.lineage.common.LineageTracer.traceDataLineage (LineageTracer.java:313)
at MITI.server.services.lineage.common.LineageTracer.traceTechnicalData (LineageTracer.java:176)
at MITI.web.common.service.facades.LineageFacadeImpl.getLineageGraph (LineageFacadeImpl.java:245)
at MITI.flash.tabs.VizModelLineage.getLineageTree (VizModelLineage.java:429)
at MITI.flash.tabs.VizModelLineage.buildLineageGraph (VizModelLineage.java:356)
at MITI.flash.tabs.VizModelLineage.performAction (VizModelLineage.java:148)
at MITI.server.servlets.FlashServlet.doPost (FlashServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:646)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:421)
at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:1070)
to org.apache.coyote.AbstractProtocol$ AbstractConnectionHandler.process (AbstractProtocol.java:611)
to org.apache.tomcat.util.net.JIoEndpoint$ SocketProcessor.run (JIoEndpoint.java:316)
to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:895)
to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:918)
to org.apache.tomcat.util.threads.TaskThread$ WrappingRunnable.run (TaskThread.java:61)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.sql.SQLException: ORA-22813: value of the operand exceeds the limits of the system
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:791)
at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:866)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1188)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3487)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at MITI.util.database.Query.executeStatement (Query.java:45)
at MITI.util.database.Statement.execute (Statement.java:66)
to MITI.util.database.CommonDataSource$ 1.run(CommonDataSource.java:50)
to MITI.util.database.CommonDataSource$ 1.run(CommonDataSource.java:47)
at MITI.util.database.Transaction.execute (Transaction.java:92)
at MITI.util.database.CommonDataSource.executeTransaction (CommonDataSource.java:80)
... more than 27
Caused by:
java.sql.SQLException: ORA-22813: value of the operand exceeds the limits of the system
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:791)
at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:866)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1188)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3487)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at MITI.util.database.Query.executeStatement (Query.java:45)
at MITI.util.database.Statement.execute (Statement.java:66)
to MITI.util.database.CommonDataSource$ 1.run(CommonDataSource.java:50)
to MITI.util.database.CommonDataSource$ 1.run(CommonDataSource.java:47)
at MITI.util.database.Transaction.execute (Transaction.java:92)
at MITI.util.database.CommonDataSource.executeTransaction (CommonDataSource.java:80)
at MITI.util.database.CommonDataSource.executeStatement (CommonDataSource.java:54)
at MITI.server.services.lineage.impl.LineageImpl.traceLineage (LineageImpl.java:554)
at MITI.server.services.lineage.common.LineageTracer.traceLineage (LineageTracer.java:1078)
at MITI.server.services.lineage.common.LineageTracer.traceDataLineage (LineageTracer.java:313)
at MITI.server.services.lineage.common.LineageTracer.traceTechnicalData (LineageTracer.java:176)
at MITI.web.common.service.facades.LineageFacadeImpl.getLineageGraph (LineageFacadeImpl.java:245)
at MITI.flash.tabs.VizModelLineage.getLineageTree (VizModelLineage.java:429)
at MITI.flash.tabs.VizModelLineage.buildLineageGraph (VizModelLineage.java:356)
at MITI.flash.tabs.VizModelLineage.performAction (VizModelLineage.java:148)
at MITI.server.servlets.FlashServlet.doPost (FlashServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:646)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
Oracle has published OEMM 12.2.1 and this error is gone! So if you are facing this problem in an older version, just go to the newest one.
-
After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Then lets refresh the USB stack
Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
all except the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and the method of Vista is identical
http://support.Microsoft.com/kb/310575----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problems------------------------------------------------------------------------------------------
If no joy, see Toshiba Support and/or their forums:
Toshiba support and drivers
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba Support Forums
http://laptopforums.Toshiba.com/Contact Toshiba
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactI hope this helps and happy holidays!
Rob - bicycle - Mark Twain said it is good. -
Bought Lightroom CC for 2 devices. One installed fine but can not get the LIBRARY to work on the 2nd unit. 2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools. If anyone can help.
Thanks Tanuj,
After reloading the software it seems to work now.
-
Hi, I use AE on an Asus laptop with NVIDIA GeForce 740 M. Recently I did an animation with ray tracing and I was working fine but at one time, I saw this message: paged memory mapped for Raytracer. Your project may exceed the limits of the cards. Try close to other applications. Try to update the CUDA driver. (5070::2).
Anyone know why this message appears if I worked well?
Thank you
The message appeared when I was making the project.
This means what it says - you are out of memory, even if only temporarily. Most likely the tesselation was too or things like samples of your memory exhaustion motion blur. If it worked regardless of the message, that I would not make too much of it...
Mylenium
-
Your computer has lost the lease to its IP address
I am receving this error "your computer has lost the lease to its IP address 192.168.100.11 on the network card with network 002354763C address 18. Please help, thanks.
Hello
If you have a router, and you use its DHCP, connect to the router (see how in its manual) and configure the DHCP protocol to keep re-new assignments of intellectual property.
If not, explain in detail the configuration of your network or to the Internet and its related features.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Windows is unable to recognize the device, one of the connected usb device has malfunctioned
in my pc it shows the error when I connect a usb device is something like this perhaps datacard or USB key via a M/F, else if usb cable connected directly connected to the pc port it works fine... even changed the cable twice there is no cable fault
It would seem that the cables tried maybe not until the correct USB connection plug. If you test this, according to the post Michael75951, and it still does not work, perhaps he could confirm bad cable(s.)
-
USB not recognized - even when there is no USB devices at all the
For a few days now, I get the message
"USB device not recognized: one of the USB devices attached to this computer is not working properly." The device has not been recognised "."
He keeps popping up in my right corner below, every 5 seconds if I don't click it. When I click on the message, I get a list of devices (ports) are available. There is an "unknown device". Maybe it has something to do with the (biometric) finger scan? This has not worked very well lately...
Even when there is no single USB device installed (normally, I have a mouse and a Targus laptop cooling mat installed as USB devices), it keeps popping up. I tried to remove the USB port from the list (or uninstall) in the remote control, but it seems that it keeps happening.
I got it all of a sudden, I have nothing specific to has not logged any strange devices (except for a spotlight on exit external screen, but this has nothing to do with USB). I also hear the sound for the connection / disconnection USB devics randomly when I'm on my laptop.
Someone has an idea?
Thank you
HP Pavilion dv7 Notebook PC
LE902EA #UUGWindows 7 64 bit
I have disabled the root hubs, figured out that we caused now my mouse and other USB physical led to no longer working and that was allowed again.
The one who gave the error message is now disabled and if the error message is no longer present.
Result: (built in) cyberlink youcam and biometric no longer work. But at least the annoying message disappeared, so I guess I can live with that.
-
A USB device has malfunctioned... Problem with Bluetooth?
I tried the suggestions. Recently upgraded to window 10 - does not work on my machine. Had to go back to windows 7. Only problems since then. Bluetooth works fine so am not sure why the message keeps appearing. Tried, Fixit but no luck? Any suggestions?
Hello
Thanks for posting your query to the Microsoft forum. I will definitely help you with this.
As all devices have same also have USB device associated drivers. Sometimes correct drivers did not get detected after the
initial setup for the reinstallation of the drivers to solve the problems.
Method 1: Run the hardware and devices troubleshooter.
The hardware and devices Troubleshooter is a tool that will check the hardware attached to the computer for all known with him of the issues and provides details and how to fix them. Follow these steps and run the troubleshooter.
Open the hardware and devices Troubleshooter
If the problem persists, follow method 2.
Method 2: Uninstall and reinstall all USB controllers.
To remove and reinstall all USB controllers, follow these steps:
- Click Start, click run, type sysdm.cpl in the Open box, and then click OK.
- Click the hardware tab.
- Click the Device Manager button.
- Expand Bus USB controllers.
- Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
- Restart the computer and reinstall the USB controllers.
- Plug in the removable USB storage device and test to make sure that the problem is solved.
Method 3: Install the USB driver manually
Reference: install a USB device
Let us know if you need more assistance. We will be happy to help you.
________________
Thank you best regards &,.
Isha Soni
-
BitLocker - cannot unlock a USB device even if the key is entered
I've read most if not all of the post here, but none could help me solve this problem of the drive being locked "write protected"?
of course, its bitlocked... in any case, it stopped during encryption and never found him
Everyone recovered from this?
Jun
It stopped during encryption and never found him
If BitLocker stopped during the encryption process, then you need to repartition and format the USB device, and then restore your backup files.
-
W620 Sony has exceeded the limit of power
I have a Windows 7 hp dv7 brand new with Salvation really care but my w620 sony always seems I think that suck to the top of a lot of power of any of the four usb ports I have on my laptop. The camera itself is in mass storage mode as it is easier to transfer pictures in this way. I tried to take the rechargeable battery on still no luck as it does so. Uh, I tried looking through the menus but no luck either. The first time I plugged in my laptop he brought photos but then later it just won't let me connect :(
It turns out it was the cable of data accuracy for the digital camera that has kept a malfunction after I have troubleshooted with my data cable from mothers. I just he swapped it for a new brand.
-
HI EXPERTS...
Please helpme to fix this...
I have a database of oracle 11g, runnint on a Windows Server 2008:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
I have two tables:
CREATE TABLE UTILS. SEG_ROLES
(
VARCHAR2 (12-BYTE) APPLICATION,
ROL VARCHAR2 (12-BYTE),
USERS VARCHAR2 (255 BYTE)
)
TOGETHER TO DEFINE
Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ('MULTIPLAN', 'ADMIN', 'ADMIN');
Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ("MULTICLIP", 'CAR01', 'PATY');
Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ("MULTICLIP", "CAR02", "FABIOLA, ERIKA");
Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ("MULTICLIP", "CON01', 'LUCY, PATY');
Insert into SEG_ROLES (APPLICATION, ROL, USERS) Values ("MULTICLIP", 'CON02', 'VALERIA');
COMMIT;
CREATE TABLE UTILS. SEG_ACCESOS
(
VARCHAR2 (12-BYTE) APPLICATION,
ADMROL VARCHAR2 (12-BYTE),
VARCHAR2 (20 BYTE) MENU,
OPCION VARCHAR2 (20 BYTE),
TYPE VARCHAR2 (5 BYTE),
OBJETO_MENU VARCHAR2 (40 BYTE),
ACCESO VARCHAR2 (2 BYTE),
ROLES_ACCESOS VARCHAR2 (255 BYTE)
)
TOGETHER TO DEFINE
Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)
Values ("MULTICLIP", "ADMIN", "ROOMMA", NULL, am', 'm_coloca', the of ', 'CAR01, CAR02');
Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)
Values ("MULTICLIP", "ADMIN", "PUT", "PREVALIDA", "SM", "sm_prevalida", the from ', 'CAR01, CAR02');
Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)
Values ("MULTICLIP", "ADMIN", "PUT", "PRECOLOCA", "SM", "sm_preColocacion", the from ', 'CAR01, CAR02');
Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)
Values ("MULTICLIP", 'ADMIN', 'LOVE', "COLOCACIÓN", "SM", "sm_colocacion", the from ', "CAR01");
Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)
Values ("MULTICLIP", "ADMIN", "PUT", "REGCOLOCA", "SM", "sm_regcoloca", the from ', "CAR01");
Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)
Values ("MULTICLIP", "ADMIN", "LDP", NULL, am', 'm_PLD', the of ', "CAR01, CAR02, CON01 CON02");
Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)
Values ("MULTICLIP", "ADMIN", "LDP", "LN_CONSULTA", "SM", "sm_PLD_LNConsulta", the from ', 'CAR01, CAR02');
Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)
Values ("MULTICLIP", "ADMIN", "LDP", "LN_BARRIDOMASIVO", "SM", "sm_PLD_LNBarridoMasivo", the from ', "CAR01");
Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)
Values ("MULTICLIP", "ADMIN", "LDP", "REP_INICICLO", "SM", "sm_PLD_ReporIniciclo", the from ', 'CON01, CON02');
Insert into SEG_ACCESOS (APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS)
Values ("MULTICLIP", "ADMIN", "LDP", "LN_BITACORA", "SM", "sm_PLD_LNBitacora", the from ', "CON01");
COMMIT;
- And this point of view:
CREATE VIEW UTILS. VW_ROL_USER AS
Select distinct APPLICATION, ROL, trim (column_value) USUARIO
from (SELECT APPLICATION, ROL, USERS USER
FROM UTILS. SEG_ROLES
WHERE IT IS NOT NULL TO USERS
ORDER BY APPLICATION, ROL
) t,.
XMLTable ((' «' ||)) Replace (USER, ",", "",""). '"'))
order by APPLICATION, ROL, trim (column_value)
CREATE VIEW UTILS. VW_ACC_ROL AS
Select distinct APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, trim (column_value) ROL
(SELECT APPLICATION, ADMROL, MENU, OPTION, TIPO, OBJETO_MENU, ACCESO, ROLES_ACCESOS ROL
FROM UTILS. SEG_ACCESOS
WHERE ROLES_ACCESOS IS NOT NULL
ORDER BY APPLICATION, ADMROL, MENU, OPTION
) t,.
XMLTable ((' «' ||)) Replace (ROL, ",", "",""). '"'))
MENU, TYPE, OPTION, APPLICATION control, trim (column_value)
CREATE VIEW UTILS. VW_SEG_ACCESOS AS
SELECT VACR. APPLICATION, VACR. MENU, VACR. TIPO, VACR. OPCION, VACR. OBJETO_MENU, VACR. ACCESO, VACR. ROL, VUSR. USUARIO
FROM UTILS. VW_ACC_ROL VACR,
UTILS. VW_ROL_USER VUSR
WHERE VACR. ROL = VUSR. ROL
ORDER OF VACR. APPLICATION, VACR. ROL, VACR. MENU, VUSR. USUARIO, VACR. TIPO, VACR. OPCION
When I ask the last posting, it works fine:
SELECT VSEG.* IN UTILS. VW_SEG_ACCESOS VSEG
But when I add conditions:
SELECT VSEG.* IN UTILS. VW_SEG_ACCESOS VSEG
WHERE VSEG. APPLICATION = "MULTIPLAN.
AND VSEG. USER = 'PATY '.
It generates this error:
ORA-22813: value of the operand is greater than the limits of the system
Cause: The value of the object or the Collection was too big. The size of the value might have exceeded 30 k in a context of TYPE, or size may be too large for the available memory.
Action: Choose a different value, and try the operation again.
Why?
Thanks in advance...
Finally found a SOLUTION at: http://stackoverflow.com/questions/14328621/oracle-10g-splitting-string-into-multiple-rows
just change the way we create the view using the regexp_substr.
CREATE VIEW UTILS. VW_ROL_USER AS
SELECT distinct trim APPLICATION, ROL, (regexp_substr (USERS, ' [^,] +', 1, level)) USER
FROM UTILS. SEG_ROLES t
WHERE IT IS NOT NULL TO USERS
CONNECTION BY instr (USERS, ',', 1, level - 1) > 0
order by APPLICATION, ROL
Thank you all
-
I've looked everywhere, including ATT tech chat, help on this one. My Treo Pro unlocked works great on everything, while receiving MMS pictures. I've upgraded to Pro of Palm 750 (winmo 6.0), using the same SIM card, I used for my old Palm 650. I get the incoming mms msg notification and a screen (and the soft-button) for download, but get the error message: "the message to download exceeds the 'size of reception Limitations' that you specified." But it's not. I spent hours to find a solution. The only easily configurable MMS parameter is for sending limit, and it is set to the position max of 500 k. But I also changed the registry successfully limits - corresponding to WAP2 sending and reception is limited to 512000 - but it does not help either. Chat ATT representative said I need a new "capable UMTS SIM" but could not explain why or why the one I have now works for everything but this feature, so I'm skeptical. Can anyone help? Others have this problem? Solutions?
Check out this thread for a registry hack to increase your size limit: http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=102005
Usual to play with the registry warnings apply.
Maybe you are looking for
-
As there seems to be having no link e-mail to technical support please someone can tell me the price for a spare battery for portable Satellite above. Battery of my daughter with a visual impairment who do not charge for more than 5 minutes. can eras
-
Pavilion 15-n249sl drivers windows 7
Hi everyone I am trying to install Windows 7 ultimate on Pavilion 15-n249sl drivers windows 7 and I have a few problems with the ethernet card, USB, webcam and video output drivers.I run recognize many utilities for hardware, but I still don't know t
-
I have a few questions. My first question is, I have a lot of apps that say they can warn my by LED light. I put it to inform me, but when I get a text or message twitter the led lights. The circle of the speaker a light? If so is there a setting I h
-
Changeable Spectre360: keyboard does not
Suddenly, my keyboard doesn't work. It will work to connect, so I switch to the keyboard on the screen to do something else. When I tap on the physical keyboard, it's rattling, but no letters or numbers show. I can use the function keys to change the
-
Sharing feature reads 'no service' after upgrade to Capitan
Hello Since the upgrade to El Capitan buttons sharing on bed 'without services' applications when you click on to. After working with trouble shooters Apple using the 'chat' service, we managed to get the button share to show the many options except