A user can control the audio commentary or subtitles in a folio?

Similar Questions

• Can the Format date/timestring service that can control the execution of the loop to a VI?

  Can the Format date/timestring service that can control the execution of the loop to a VI?

  Example,

  a VI is running at August 25, 2010 and print a txtdata(3)) '100825.

  Then follow when time system running at 2359hrs, August 25, 2010 at 0000hrs, August 26, 2010.

  and print a txtdata(3)) '100826.

  How?

  When the system changes a new date, problems occur.

  
  

• My only intention is to create a model/site based URM where we can provide functionality to scan for users. We want a distributed feature where users can scan the images remotely and commit to the WCC:Records / URM. Is it possible to be thr

  My only intention is to create a model/site based URM where we can provide functionality to scan for users. We want a distributed feature where users can scan the images remotely and commit to the WCC:Records / URM.

  Is it possible to be done through Oracle distributed Document capture (ODDC) and if it is possible how to connect ODDC with the client browser. Please suggest

  Ok. So, the answer is certainly: Yes, it is possible.

  The part of analysis, this is exactly what ODDC is good for. Unless you have the license already, however, you may have to go with the product to Capture Oracle WebCenter (large companies), which provides the necessary also.

  Regarding the validation and storage, ODDC/ODC/WebCenter Capture can commit images scanned at several depots, including University Complutense of MADRID (URM can be considered a Complutense University of MADRID with a specific purpose / several modules or components under voltage and configured). So, technically, he has no problem.

  When I have little doubt, however, is the meaning of the scenario - declaring an item as a record is an important event in the life cycle of the document - a record is often (or always) cannot be changed to ensure the integrity and non-repudiation of information. In this perspective, a direct validation of a recording of a scanning system (where errors such as bad scans, lack of pages, etc can be expected, particularly if the scanning is performed by the end user in a distributed fashion - so, not very experienced) seems a little dangerous.

• LR fills the entire screen. How can I reduce this so I can control the size or reduce it with the help of the control-M?

  LR fills the entire screen. How can I reduce this so I can control the size or reduce it with the help of the control-M?

  Hi DP,.

  Are full-screen mode in Lightroom, you can it exist by pressing SHIFT + F.

  Kind regards

  Mohit

• How many users can use the unique apps?

  How many users can use the unique apps?

  A... the owner

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations may NOT be used at the same time (noted in the link above of the license)

• Is it possible to make a PDF interactive on a Web site so that a user can submit the information and the information is sent to an e-mail account?

  Is it possible to make a PDF interactive on a Web site so that a user can submit the information and the information is sent to an e-mail account?

  Hi ayrtont99139624,

  Yes, you can create interactive PDF forms using Acrobat or InDesign that can be downloaded on the Web site in order to collect information from users.

  See the help link - below

  Acrobat: -.

  • Acrobat help. Create and distribute PDF forms
  • Use the form wizard | Adobe Acrobat DC tutorials

  InDesign: -.

  • Using InDesign | Dynamic PDF documents
  • Using InDesign | Forms | CC, CS6

  Kind regards

  Nicos

• Master Volume Control / Mute button that controls the audio files on the entire Folio?

  Hi, is there is no way to create a Master Volume Control / Mute button that controls the audio files on the entire Folio?  We have individual pages with noise when the page loads and there is a mute option for these on each individual page to help

  There is no way to toggle all the sound elements through the application.

  Neil

• How can I make user custom interface e-mail allow the user to control the tests?

  Hello.

  I am totally new to TestStand and I try to use it to test a simple dll to a larger system, as kind of an assessment to see if we want to migrate to this system.

  I use TestStand 4.2 with LabWindows/CVI 8.5... He was going along fine, but now I'm stuck trying to customize the user interface

  Specifically, I want to have the user be able to control what are called in the order and be able to choose (through, say, a digital control) what inputs are sent to the object to be measured.

  I found a few examples, but they seem just to manage the display of TS data to the user interface, not * is * data of the UI back to TS...

  Is there a tutorial that handles such things?

  I'm seriously lost here.

  To answer your question, the best way to get info from the user interface in the file of the sequence is to do the same thing were the examples you were watching.  Except that your data will be the SequenceContext.  Then, you can use the nodes property or even the screws TS to set the properties inside your sequence.

  There may be a better way to accomplish what you want though.  Why not pop up a dialog box (written in CVI) in the (substituted in your movie file) PreUUT with a list of 'tests' of your sequence?  The user can select which tests they want to run.  Then the prerequisites for your steps which indicate the step execution based on what the user has selected.  The dialog box can also have entries that is filled to the sequence (with parameters) which can FileGlobals or people of the country or whatever.

  User interface messages are used for the duration of decisions or feedback.  It seems that your case would be more than one once a decision to run.  Unless they choose tests during execution.

  Hope this helps,

• XP Home only 2 users can access the internet

  I have a laptop Dell Inspiron 1300 Windows XP sp3.  I'm the only user for a few years until I've added my son as a different user (with administrator privileges).

  I have been using a USB WiFi dongle with success.
  However when my son connects, it cannot access the internet - not even with a link of ethernet wired router to wide band.
  I can ping sites like yahoo.com, but not access via a browser.
  Help, please
  Thank you
  David E.

  Hi David,

  1. what browser do you use to visit Web sites?

  2. If you are using Internet Explorer, then what is the version?

  3. What is the error message when you access a Web site?

  4. what security software is installed on the computer?

  I suggest you try the following steps if you use Internet Explorer to browse.

  Method 1: How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Check if the problem persists.

  Method 2: Create a new user account

  The user account may be damaged and because who you may not have access to the Internet. I suggest to create a new account and check.

  To add a new user to the computer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/usercpl_add_user.mspx?mfr=true

  If the problem does not occur in the new user account, and then transfer the data from the old account to the new account.

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

  Let us know the results.

• Guest user can access the system tools?

  Start menu > all programs > Accessories > system tools

  This allows the user access to computer, control panel (and running and same command prompt), although I selected "don't display this item" through properties > Start Menu > customize. Is there something I don't understand? I don't want a guest user to gain access to ANY 'system tools '. How can I accomplish this?

  Hi Jim,.

  Thanks for posting your query in Microsoft Community.

  The guest account providing minimum privileges to perform tasks not requiring administrative privileges.  People using the guest account cannot install software or hardware, change settings, or create a password. Because the guest account allows a user to log on to a network, browse the Internet, and shut down the computer, you must disable the guest account when not in use.

  You can open the command prompt in elevated mode (with administrative privileges), which is actually necessary to run multiple commands that can affect your system. If you use Windows 7 Professional or higher edition, group policy can be edited privileges for the guest account. To learn more, you can re-post your query in the TechNet forums calling for changes in the group policies for the guest account.

  For more information, see:

  Enable or disable the guest account the

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• How some users can run the same batch

  Hello

  FSCM9 and tools 8.49 on Windows,

  How can we do that user1, user2, and user3 be able to run a web interface bath Peoplsoft?

  Should we create series for each control? We must give them special guarantees or role?

  Thank you.

  See PeopleBooks:

  Define process definitions

  Definition of the definition process Options

  To access the Options of process definition page, select selectPeopleTools, and then selectProcess Scheduler, then selectProcesses, then selectand click on the Options tab of the process definition.

  Image: Definition of process Options Page

  This example illustrates the fields and controls on the Options of process definition page. You can find definitions for fields and controls later on this page.

  

  Security process

  Go to the Security section of process.

  Component

  Attaching the process to the components. Adding a component to a process definition of the causes that address the definition to appear on the page application for process Planner when you select file, run in this component, if you have security to run the process.

  Process group

  Make the process definition a member of the group. A process definition can belong to several groups of processes. Select an existing group, or add a new group by entering a single process group name. To add new lines, click the Add button. Process groups are then assigned to profiles of security administrator Security in PeopleSoft, which allows you to specify process queries the user classes can perform.

  See PeopleBooks:
  Setting permissions

  Setting permissions of process

  Access to the whitelists - process page (select selectPeopleTools, then selectSecurity, then selectPermissions & roles, then selectPermission lists and click on the processes tab).

  Just as you set permissions for pages, a user can access, you must also specify the batch (and online) process that can call users through PeopleSoft process scheduler. In general, process groups are classified by Department or task. For example, batch programs used by your payroll probably all belong to the PAYROLL process group, or a group named the same way.

  When you create a process permissions list, you add the groups of appropriate process so that a user belonging to a particular role can call the appropriate batch programs to complete their commercial transactions. To do this, use the process group permissions page.

  The process authorization profile page allows you to specify when a user or role can modify certain parameters of the PeopleSoft process scheduler.

  Note: You grant process profile directly to the profile user and group permissions of process through whitelists.

  Process group permissions

  Access the page process groups (click on the permissions link on the whitelists - page process process group).

  File: Page permission to process group

  This example illustrates the fields and controls on the page of the authorization to process group.

  

  This page lists the groups of processes associated with a permissions list. Process groups are collections of process definitions that you create using the PeopleSoft process scheduler.

  As a general rule, you group process definitions by groups of work within your organization, and this working group usually has a particular role that is associated with. No matter how you organize process definitions, you must assign process groups to a permissions list.

  Users can run only processes that belong to groups of processes assigned to their roles. For example, you can have a set of process definitions that relate to your human resources department and another set for your production service.

  In other words:
  Add the process to the runcontrol component, providing the user access to the runcontrol component.
  Add process group processes. Add process group to the permissions list. Assign the authorization list to user.
  Hope that answers your question.

• You can remove the audio of a FLV video output?

  If you can, how would we go to this topic? I want a button to press, leading to a different scene that begins with a clip, but I can't have audio cutting in the sense too quickly. Is it possible to use the code to fade audio FLV / output?

  addEventListener (type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, useWeakReference:Boolean = false):void

  the 3rd param is the parameter uscapture.  events (during the capture phase) travel from the top of the screen (the scene) down to the interactive objects in the foreground and continue down to their descendants. then they start to "bubbles" upward.

  default event listeners capture events during the phase of propagation so a descendant object will have its listener triggered before a parent.  But if you activate the capture parameter, you can get the parent to listener to trigger in front of a child.

  the 4th parameter is the priority setting and it allows you to control the order that listeners are trigger for the same interactive object with the same type of earphone.

  and the 5th parameter determines whether the listener is low (i.e., the object can be gc would be while the listener is still active).  This param is buggy is my experience and ensure an object is finally going to get gc would you need to use weak references and explicitly remove the listener.  but the behavior depends on the version of flash player and I have not tested in several versions, so maybe that it works correctly now.

  (p.s when you use the adobe forums, check useful/correct, if there is.)

• Siri can control the functions of the phone

  For about the last week or more (probably since the last update) when I ask Siri to perform tasks that control the phone such as "that the timer, call me back, set an alarm, etc." she said "Sorry I can't do that right now."  A reboot solves the problem temporarily, but the problem comes back shortly after.  When you have learned to rely on Siri to these functions, it becomes incredibly annoying.

  iPhone 64 GB 6s

  iOS 9.2 (13 c 75)

  Hi Macidiot_1979,

  If you are having problems with Siri understand your voice commands, take a look at the troubleshooting steps in this article.  For example, what happens when you turn off the Wi - Fi and order Siri using your cellular network?  Take a look at these steps and answer if the problem still persists.

  Use Siri on your iPhone, iPad or iPod touch

  Help with Siri

  • If "Hey Siri" does not work, make sure that "Hey Siri" is turned on under settings > general > Siri.
  • Could Siri say, "Sorry, I have problems connecting to the network", or "Try again in a few moments." It is probably a problem with the network. Check your Internet connection and try again later.
  • If Siri is not available or responding to questions, see the next section.

  If Siri is not available, or do not understand or answer questions

  After each step, see if you still need help:

  1. Make sure that your iOS device has an Internet connection via Wi - Fi or cellular data.
  2. On your iOS device, make sure that Siri is enabled under settings > general > Siri.
  3. Restart your iPad, iPhone or iPod touch.
  4. On your iOS device, go to settings > general > Siri and turn off Siri. Then turn on again.
  5. Ensure that the microphones on your device are not blocked. For example, if your device has a protection case, remove it.
  6. If you use an iOS device, try to use Siri with headphones. If the works of Siri, get more help with the microphones on your device.
  7. Contact Apple support.

  Happy holidays!

• Financial Reporting - the user can access the POV dimensions

  Hello. In collaboration with the 11.1.2.3.700 version. Have a HFM user that can go in HFM and see all members and data (scenarios, entities, customs, etc.) within HFM. When he goes to EN to run reports, however, he has problems with dimensions that are secured in HFM - entity, scenario, (custom) data type. If one of these dimensions is the point of view, they do not show when it displays an overview from the point of view and then the report does not work because there is no selection. If these dimensions are defined in the report (which is not part of the POV), the report runs well.

  There is no preference user limiting POV members and reports are not confined to specific user POV members. Other people can run those reports very well. Also tried to make this user a HFM and the Foundation (which EN) administrator and even there the problem.

  Any thoughts?

  Thank you

  Eric

  Hello. A great co-worker has solved the problem. She used the ManageUserPOV.cmd utility to export users POVs. The user in question had an entry for the missing dimension, so he was never invited to do and reports failed. Imported and supplied the lack of dimension and it works fine now.

  Eric

• If I buy a cancellable for creative cloud for photoshop, all my comper users can use the software, or just me?

  I am interested in buying a subscription to creative cloud for Photoshop for my desktop computer at home. If I download Photoshop under my Adobe ID, can all the users (my husband) on my computer use the software under a single subscription or software/subscription is only good for me?

  Hello

  You can actually have installed creative cloud and on two computers, signed as long as you don't use it on one at a time. Download and install as you did on the first computer, sign in to your Adobe account on the Adobe using your Adobe ID website, download the desktop app from clouds, then download the software. Sign on a computer that should not be used: log in and log out of the desktop Adobe Creative Cloud application

  Hope this helps!