A1 - set the sensitivity of the touch screen

Similar Questions

• S2240T, the touch screen does not work

  I just bought this monitor and it displays correctly what should be, but it does nothing when I touch it. I have the USB cable connecting my monitor to my computer. My OS is Windows 8.1. In my view, it is possible that it must be installed for the contact to work, but the disc (and documentation) that it comes with a driver is very little used for this. The driver on the disk I installed seems just for display, no contact.

  I had to reset my computer all Win8.1

  I have the touchscreen Dell P2314T (VGA) also has worked well since I bought the new optiplex and monitors. When I reinstall my system it di does not work.

  I have unplugged all connections to the back of the monitor and was able then to recalibrate and set the touch screen and now it works fine.

  THUS, it does not work with Win 8.1

  but should be the last recognized maybe or just USB connection need to be re added as if it were a new device to the modified system.

• How to make it turn off the touch screen?

  I don't want to use the touch screen. How to turn off the it? It is activated by all sorts of things, like my touch cat's tail, or an insect landing on it, or a curtain blowing against it. I don't type using the screen, I prefer the keyboard that I can not type quickly on the screen. I would like to turn off the touch screen when I use it not (most of the time), or even permanently - it is not useful for what I want to do that the screen is not as sensitive or as fast as the input devices that I usually use.

  Hi, I have a HP TouchSmart 320-1030, so it can work on your touch screen:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

  When you want your touchscreen to work again, follow the above procedure, EXCEPT when right-clicking on the touch screen driver, select enable.

• How to disable the touch screen of HP 23-h027c

  My touch screen is sensitive even to small bugs! Living in a tropical island, this is an inconvinience. So I want to disable the touch screen and use the mouse and keyboard only. How to disable the touch screen? Help welcome. Thanks: Pedro [personal information edited by Moderator]

  Enter the device, as shown in the following image Manager right click of the device touch screen and choose disable.

  

• Problems with the touch screen of HP all-in-One after upgrading Windows

  I recently updated my version of Windows (64-bit) with system updates and then a full version updated to version 8.0 version 8.1.  After the update is complete, I started to experience a strange problem with the touch screen on my HP Envy Rove.  The screen would flash repeatedly one set of points in the right lower quadrant of the screen as if the simulation random screen button.  There is no way to stop this.  If the screen on a keyboard was pulled up, letters in the place of the flashes would be broadcast in the fields on the screen.

  The only way to stop the flashes of screen has been to go into the Device Manager and disable the HID-Compliant device driver.  It stopped (system generated keys) flashes, but also disabled my touch screen input.  So now the system is usable, but without the benefit of the touchscreen.

  Here is the information on the driver:

  HID-Compliant device

  Date: 21/06/2006

  Version: 6.2.9200.16851

  (input.inf)

  I tried updating the driver, but this seems to be the latest version available.  Go back to the previous version of the driver, could solve the problem, but I could not locate on the support web site.

  Any suggestions on how to solve this problem and re-enable the ability of my touch screen?

  Hello

  Downloaded drivers from the manufacturer will be the most tested and up to date available. The best place to download a driver is directly from the manufacturer of the equipment.

  So I suggest you to install the driver that is available on the HP website for your model.

  Troubleshooting of touch screen in Windows 8

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03488148

  Just reply with the results.

• Using the touch screen and the touch pad at the same time on Windows 8

  How can I use my touchpad and my touchscreen Windows 8? I use Acer and it seems that whenever I get I have TO use the touch screen and my cursor is non-existent. I'm sure there will be a setting I can change to be able to use both at the same time, but so far I can't find answers online or elsewhere.

  Help, please!

  Hello green,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the model number of your PC Acer laptop?

  Thank you for your query details.

  I also like the fact that you want to use the touch screen and press the key at the same time.

  Unfortunately, it is not possible. However, you can use touchpad of precision which uses a variety of touch gestures to get around your computer. Touchpad different gestures are provided in this article.
  Reference:
  With the help of a precision touchpad
  http://Windows.Microsoft.com/en-us/Windows-8/touchpad

  You can also make changes to its settings to adjust the duration that your touchpad stays off as you type so that you can avoid accidentally tapping the touchpad with your thumb and move the cursor.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• HP Paviliion cursor disappears after using the touch screen

  Hello

  So, I just bought a new laptop from HP Pavilion special edition beats 15z Touhscreen about two weeks ago. I was with the sliders and just decided to try some custom cursors. I have downloaded them (link to the page for the sliders below) and selected in the Control Panel, no problem. However, as soon as I use the touch screen, it disappears (which is normal), but when I try to use the touchpad or mouse, it doesn't come back, unless it's one of the other cursor types: link select, busy, etc.. Also, if I use custom to select all normal but the cursor jumps back. Finally, even if I click on a link that would otherwise use the selection cursor link using the touchscreen, the link selection cursor appears again when to switch it on touchpad.

  The other problem is happening sometimes just by default, for the most part in Google Chrome. However, with the custom cursor happens no matter what, and it's a major problem.

  Thanks for you help with anything that can give me.

  Data sheet:

  Windows 8

  AMD A8 - 5545M APU with Radeo HD Graphics, 1.7 GHz

  8 GB RAM

  processor 64-bit / x 64

  Full Windows touch support contact w/10 Points

  link to the download page for sliders: (if so, Im just trying to display all possible information)

  Slider Preview/download page

  Hello Tony,.

  I apologize for the inconvenience caused.

  Lets try the following methods and check if it helps.

  Method 1: As you said that it happened also with the default cursors as well, I suggest you to try the mouse setting in Windows 8.

  1. go in Control Panel.

  2. go in the mouse settings.

  3. uncheck the option for the mouse to disappear while typing.

  4. now check if the system built in the cursor disappears.

  Method 2: As you say it happens only with custom sliders, I would suggest that you check to see if the problem persists even after placing the computer in a clean boot state.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: After troubleshooting, see the section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Hope this information can help, just reply to the State of the question for any other help.

• The touch screen

  First of all, let me thank the poster who already helped me to this question in having posted on the tests under Device Info.  My pre in recent weeks has made these 'ghost' hit after I put the phone down or even when I use it.  First I wrote chalked up tasks and screen dirty and sometimes a little software as problem clean often arrested and turning then turn it stopped it.  These random touch screen became more frequent and cleaning or switch it off had little or no impact.  Finally, I read tests on this forum and the touch of the screen test shows that left all of the touch screen does not work.  Had a feeling that it was something like that, because when you do the SMS I was no longer able to hit the sign in lower left to start a new text message.

  Guess that it is a defect in the screen and also guess there is very little that will see this question but have to ask if anyone else has?  I say default as the phone is not never dropped or used in any way that an accident could have happened.  Correct me if I have this wrong, but since this is a defect that should be covered by the warranty and no charge?  I live very rural and the nearest the actual repair center is more than an hour away so before you go I would like to know if it's something that happens from time to time and I do not see a home solution.  Have not even that hooked up to my computer again and I bought the day 1 of the version so no backup tips before you go?  BTW am happy with another pre touching itself and launch of things on its own.  Finally, and I don't think it's a fault of the screen, but all the advice on the protection of the screen?

  Looks like you need a repair on this unit, and yes that would be covered by the guarantee as described. You must call the 877-426-3777 Palm customer service and to set up a repair or replacement.

• Can I turn off the TOUCH screen feature?

  Here's my problem: my granddaughter for baby love watching YouTube nursery rhymes on my iPhone before the NAP. But sometimes it naturally touches the screen, which stops the video.

  Is there a way to disable the TOUCH screen of the iPhone function while keeping the video running?

  Thank you!!!

  Hi, Edward

  Yes - you can see that guided access (for example: "Ignore all keys") meets your needs:

  http://help.Apple.com/iPhone/9/#/iph7fad0d10

• Laptop: the touch screen on my laptop does not work

  The touch screen on my computer portable organizers can't work, what can I do?

  Bill

  Hey,.

  The most common issue with touch screens, it's often people think they have a touch screen when their computer actually did not come with one.  (Seriously!)  If you have a touch screen, go here for simple touchscreen, troubleshooting steps: http://support.hp.com/us-en/document/c03488148

  -wes

• How to temporarily disable the touch screen in Windows 8? TouchSmart 320-1122la

  TouchSmart 320-1122la

  64 bit of Windows 8

  This solution does not work for me because I don't have the option "Use your finger as input device."

  Go to the sounds and then hardware and Control Panel.

  Select the Pen and Touch and go to the contact tab.

  At the top is "Use your finger as input device."  Uncheck the box.

  Click apply and then click OK.

  Is there another solution?

  Thanks in advance.

  Hi, I have a HP TouchSmart 320-1030, so it can work on your TouchSmart:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

  When you want your touchscreen to work again, follow the above procedure, EXCEPT when right-clicking on the touch screen driver, select enable.

  ~ Lil Liebe

  I'm not an employee of HP; I just want to help.

  Click the White Star of Kudos to say thank you *.

  By clicking 'Accept as Solution' on an answer that solves your problem makes it easier for others to find solutions.

• monitor 23tm: where can I buy a usb cable for the touch screen of hp 23tm?

  This USB cable allows to use the touch screen functions. Anyone know where I can buy a replacement?

  @oneextremehiker, welcome to the forum.

  You should do HP Partsurfer one test to see that HP is available.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Portege M930 - entry of the finger on the touch screen no longer works

  Got one of these

  https://www.MyToshiba.com.au/products/computers/Tablet/M930/pdw04a-00c001/specifications

  Is no longer able to use the entrance of finger on the touch screen.
  Pen works on touch screen OK.

  It's like if I had accidentally disbled it somehow.

  Cannot find any reference to a key or switch to toggle finger on the touch screen to enter the manual in pdf or google.

  Does anyone know how to re activate the finger of entry for the touch screen on a toshiba portege Tablet M930?

  Hello

  The fingertouch can be disabled.
  Go to the control panel? Pen & touch

  in the Pen and Touch Settings window, click on the contact tab
  Check or uncheck the checkbox next to your finger as input device
  Click on apply and then OK

• Portege M400 - where to find the touch screen XP driver

  Hello, I was wondering where I could find the touch screen for my Portege M400-S5032 pilots.
  I looked on the site Toshiba driver but could not find them.

  Thanks in advance for your help,
  Carbira1

  Hi mate

  Take a look at the Toshiba driver page we
  [Drivers Portege M400-S5032 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1598633& rpn = PPM40U & modelFilter = M400-S5032 & SelCategorie = 2756709 & selFamily = 1073768662]

  There you should find the Wacom Dual Touch driver for Windows Vista/XP
  I think it's a good thing.

• How to disable the touch screen on the Qosmio DX730?

  I want to use the calibrators of color such as colourmunki for my graphic work. These must place me something on the screen.

  How can I temporarily disable the touch screen while I do this?

  I tried Control Panel and manual with no luck.
  Thanks for any help

  Hello

  Have you found a way to do it?
  I think that it of not possible to disable the touch screen.
  Found no information in the user manual. Maybe you can check the BIOS settings available. Switch on and press F2 to enter the BIOS.
  But to be honest, I doubt that a power option would be available there.